Move all internal kobject APIs to own header and do not expose them with
the rest of the public API.
Signed-off-by: Anas Nashif <anas.nashif@intel.com>
Add the following improvements to the spi_loopback async test:
- Verify that a set of multiple spi_buf structures can be sent
successfully
- Check that the contents of the RX and TX buffers match after transfer
completion
Signed-off-by: Daniel DeGrasse <daniel.degrasse@nxp.com>
Adding support for echo option if telnet commands are supported. This is
useful when the telnet client is in character mode. It allows to use the
arrow keys, ctrl-c and more. Something to keep in mind is that when
character mode is turned on by the client, network traffic is
considerably increased as each typed character is sent over the wire.
Note: echo mode is only supported if SHELL_TELNET_SUPPORT_COMMAND is
enabled.
Signed-off-by: David Corbeil <david.corbeil@dynon.com>
This adds the required conf and dts overlays required for the
application on stm32h747i-disco board.
Also moved CONFIG_SDMMC_STM32_HWFC option from prj_blk.conf to
nucleo_h743zi_blk.conf as that is STM specific option.
Build the application as
west build -p always -b stm32h747i_disco_m7 \
samples/subsys/fs/littlefs/ -- \
-DOVERLAY_CONFIG=boards/stm32h747i_disco_m7.conf -DCONF_FILE=prj_blk.conf
Signed-off-by: Murali Karicheri <murali.karicheri@sandc.com>
STM32L562 Discovery kit is not compatible with Bluetooth over USB
application.
Add missing information related to the BLE capability of this board.
Signed-off-by: Ali Hozhabri <ali.hozhabri@st.com>
Modify SPI configuration to match the features introduced in PR #63437.
Set the property "controller-data-delay-us" to zero for boards
which are using BlueNRG-MS.
Fix Chip Select configuration for stm32l562e_dk board.
Signed-off-by: Ali Hozhabri <ali.hozhabri@st.com>
The current error messages are a bit cryptic, rework them to make them
more meaningful:
- add an extra message on the first error to explain what the errors
refer to.
- rework the error message to be more explicit.
- rework the priority string print to use a LEVEL+offset format to
somehow highlight that the number is the offset from the level, not
the actual priority.
- print the init function name in addition to the devicetree path.
Signed-off-by: Fabio Baltieri <fabiobaltieri@google.com>
Since bb590b5b6e introduced ordinals in the priority sequence, the "same
priority" case cannot happen anymore, furthermore the priority value in
the script is now the position of the function in the init sequence, so
if two devices have the same priority there's something real bad going
on.
Drop all the "same priority" handling code and tests, convert the case
into ane exception instead. Drop the init stubs as well from the test,
they are not required anymore.
Signed-off-by: Fabio Baltieri <fabiobaltieri@google.com>
Adds the device trees for the board and its Arduino connector,
default Kconfig and documentation.
The following features have been confirmed working on hardware:
* ADC
* I2C
* RTC
* SPI
* SDMMC
* UART
* OctoSPI Flash
Signed-off-by: Mathieu Choplain <mathieu.choplain@st.com>
Do not include the resource type (rt=) in the registration message when
using the OMA JSON format. This was a workaround specifically for the
Wakaama LwM2M server which is no longer needed since the latest master
branch.
Signed-off-by: Marc Lasch <marc.lasch@husqvarnagroup.com>
Real UARTs usually write 1 to a few bytes at a time through a
latch buffer. Add latch buffer property to binding for
uart_emul and limit fifo_read and fifo_fill to not exceed the
latch buffer.
Signed-off-by: Bjarki Arge Andreasen <bjarkix123@gmail.com>
Add synchronization using semaphores for the UART ISR tx/rx
tests, instead of relying on a single k_yield() call to
ensure all UART ISR work can be completed before validating
the result.
Signed-off-by: Bjarki Arge Andreasen <bjarkix123@gmail.com>
Most tests define a buffer for UART data on the stack,
including the tests testing UART IRQ. Move buffers to
static memory, within the test fixture, which can then
be passed as the user_data to the UART IRQ callback.
Signed-off-by: Bjarki Arge Andreasen <bjarkix123@gmail.com>
Define local thread to emulate different thread priorities.
A UART driver may call back from within a thread with higher
or lower priority than the thread calling the UART API. This
can hide potential concurrency issues, especially if the
thread priorities are the same, or even using the same thread
in case the system work queue.
Signed-off-by: Bjarki Arge Andreasen <bjarkix123@gmail.com>
This commit updates all x86 SoCs to set SOC_LINKER_SCRIPT CMake
variable to point to active linker script directly.
Signed-off-by: Torsten Rasmussen <Torsten.Rasmussen@nordicsemi.no>
This commit updates all xtensa SoCs to set SOC_LINKER_SCRIPT CMake
variable to point to active linker script directly.
Signed-off-by: Torsten Rasmussen <Torsten.Rasmussen@nordicsemi.no>
This commit updates all sparc SoCs to set SOC_LINKER_SCRIPT CMake
variable to point to active linker script directly.
Signed-off-by: Torsten Rasmussen <Torsten.Rasmussen@nordicsemi.no>
This commit updates all riscv SoCs to set SOC_LINKER_SCRIPT CMake
variable to point to active linker script directly.
Signed-off-by: Torsten Rasmussen <Torsten.Rasmussen@nordicsemi.no>
This commit updates all posix SoCs to set SOC_LINKER_SCRIPT CMake
variable to point to active linker script directly.
Signed-off-by: Torsten Rasmussen <Torsten.Rasmussen@nordicsemi.no>
This commit updates all mips SoCs to set SOC_LINKER_SCRIPT CMake
variable to point to active linker script directly.
Signed-off-by: Torsten Rasmussen <Torsten.Rasmussen@nordicsemi.no>
This commit updates all arm64 SoCs to set SOC_LINKER_SCRIPT CMake
variable to point to active linker script directly.
Signed-off-by: Torsten Rasmussen <Torsten.Rasmussen@nordicsemi.no>
This commit updates all arm SoCs to set SOC_LINKER_SCRIPT CMake
variable to point to active linker script directly.
Signed-off-by: Torsten Rasmussen <Torsten.Rasmussen@nordicsemi.no>
This commit updates all arc SoCs to set SOC_LINKER_SCRIPT CMake
variable to point to active linker script directly.
Signed-off-by: Torsten Rasmussen <Torsten.Rasmussen@nordicsemi.no>
This commit updates the handling of board and SoC linker scripts.
Several SoCs creates a linker.ld file which sole purpose is to include
another arch common linker script, often with content like this:
#include <arch>/linker.ld
instead of 100+ SoC specific linker.ld files containing just a single
include line of above structure, then this commit introduces two now
CMake variables, BOARD_LINKER_SCRIPT and SOC_LINKER_SCRIPT.
This allows the board and SoC CMake code to point directly to a common
linker script instead of creating a dummy linker.ld file doing this.
This removes the need for several dummy linker.ld file.
Signed-off-by: Torsten Rasmussen <Torsten.Rasmussen@nordicsemi.no>
Python 3.12 is not (yet) providing a seamless experience for Windows
developers. Update Install instructions to invite people to stick to
Python 3.11 for the time being.
Signed-off-by: Benjamin Cabé <benjamin@zephyrproject.org>
This makes intel_rpl board configuration similar to other Intel
boards (like intel_adl) and also fixes SHELL_STACK_SIZE configuration.
It should depend on ACPI.
Signed-off-by: Andrei Emeltchenko <andrei.emeltchenko@intel.com>
Ubuntu 18.04 LTS support was dropped in May 2023, therefore bump
version to oldest supported LTS release
Signed-off-by: Jamie McCrae <jamie.mccrae@nordicsemi.no>
Update Zephyr fork of MCUboot to revision:
4a1effbc301fc302ecbaf40d4eb2be520b53010d
Brings following Zephyr relevant fixes:
- 4a1effbc zephyr: Remove deprecated ZEPHYR_TRY_MASS_ERASE option
- 2b924da4 samples: zephyr: Use the default MCUBoot PEM key file
- 25b7c7a8 imgtool: make "align" command line parameter optional
- 301d5655 readme: update for next dev release
- e0bdcdec Update version files for 2.0.0
- 9b92ee91 boot: zephyr: add support for LPC55Sxx
Signed-off-by: Jamie McCrae <jamie.mccrae@nordicsemi.no>
