Adds a note about required changed for Zephyr 3.4 SMP version 2
error translation handlers in Zephyr 3.5 (or newer)
Signed-off-by: Jamie McCrae <jamie.mccrae@nordicsemi.no>
Remove unnecessary calls to __ASSERT_NO_MSG() in CAN controller driver
timing setter callbacks. The CAN API functions can_set_timing and
can_set_timing_data() already provide run-time timing parameter validation.
Signed-off-by: Henrik Brix Andersen <hebad@vestas.com>
Improve the Doxygen comments for coap.h by adding missing documentation
for most of the compilation units.
Signed-off-by: Benjamin Cabé <benjamin@zephyrproject.org>
I2C scan might fail as peripheral is still busy completing last
operation. This makes sure transfer call waits for free line.
Signed-off-by: Sylvio Alves <sylvio.alves@espressif.com>
In PR #62947 a timeout variable was replaced with a method,
but this timeout was used in another place to start
pytest subprogram. This commit provides a fix.
Signed-off-by: Grzegorz Chwierut <grzegorz.chwierut@nordicsemi.no>
Add a required change in the migration guide to document the changes
to the accept() callback in struct bt_l2cap_server.
Signed-off-by: Donatien Garnier <donatien.garnier@blecon.net>
Update to a fixed percepio tree, which allows the build to pass for valid
version numbers with 0 being one of the version number components.
Signed-off-by: Johan Hedberg <johan.hedberg@intel.com>
The compile script had been modified
to fully parallelize all images builds
in 1de363d9d5
And has been kept building everything in parallel since then.
Over time we have seen an increase in the number of hangs
for this job in CI.
This is understood as being the result of the number of images
having increased, leading to a too high load
on the worker machines which cause them to timeout their
connection to the github CI scheduler.
In b83a828825
these jobs priority was lowered to aleviate this issue,
but again we see an increased number of CI runner
disconnects.
Let's parallelize this compile jobs a bit less.
With this change, we do not build anymore the sets of
host ll and mesh test images in parallel but sequencially.
On a local test this reduces peak load from
~1700 to ~700, and eliminates issues with system
unresponsiveness; while there is no statistically measurable
increase in overall build time.
Note that the single audio image is still built in parallel
to the other 3 sets, as this was seen to improve total
build time by 2 seconds out of 1m51s.
Signed-off-by: Alberto Escolar Piedras <alberto.escolar.piedras@nordicsemi.no>
Commit 759e07bebe ("intel_adsp: move memory window setup to
PRE_KERNEL_1") moved memory window setup from EARLY to
PRE_KERNEL_1. Similar change must be done to boot_complete, or
otherwise boot-up sequence will not be completed correctly
on all platforms.
Suggested-by: Anas Nashif <anas.nashif@intel.com>
Signed-off-by: Kai Vehmanen <kai.vehmanen@linux.intel.com>
Commit 2f003e59e4 ("kernel: Re-factor k_mem_slab definition") moved
block_size into from k_mem_slab to k_mem_slab_info without updating i2s
handlers. Use the new member to fix build failures.
Fixes: #63363
Signed-off-by: Tomasz Moń <tomasz.mon@nordicsemi.no>
hal has to simple corrections:
- One of the asserts were obviously checking wrong condition.
It resulted in crash when asserts were enabled
- pdc module was using calloc in PRE_KERNEL_1 stage which is
not allowed. Latest Zephyr changes of default c library
triggered crash. Before calloc returned NULL and that was handled,
but now it simple returns some random data.
Now static buffers are utilized instead.
Signed-off-by: Jerzy Kasenberg <jerzy.kasenberg@codecoup.pl>
Fix number of completed packets generated when BIS HCI ISO
Data packets sent to Controller are in fragments. Use the
ISOAL stored sdu_fragment count to generate the number of
completed packets count.
Signed-off-by: Vinayak Kariappa Chettimada <vich@nordicsemi.no>
Kconfig option to turn off ISO Data Packet Sequence Number
use to place the ISO Data in the correct radio event,
instead simply buffer it to next radio event.
Signed-off-by: Vinayak Kariappa Chettimada <vich@nordicsemi.no>
Fix ISO data timestamp to reflect the SDU reference point
and not the ISO event anchor point when PDUs received after
retransmissions.
Signed-off-by: Vinayak Kariappa Chettimada <vich@nordicsemi.no>
Use of payload_count for supporting flush timeout in
Central and Peripheral ISO Lower Link Layer.
Signed-off-by: Vinayak Kariappa Chettimada <vich@nordicsemi.no>
Skip `test_catch_fatal_error` test case for Armv8-R because
divide by zero trapping is not supported on this architecture.
Fixes#63268
Signed-off-by: Manuel Argüelles <manuel.arguelles@nxp.com>
The percepio build seems to have a bug and fail whenever the major, minor
or patchlevel numeric value is 0:
Invalid version specified: major: 3, minor: 5, patchlevel: 0
Disable the sample until a proper fix is available.
Signed-off-by: Johan Hedberg <johan.hedberg@intel.com>
The release name length forgot to take into account the optional
EXTRAVERSION string (e.g. rc1).
Signed-off-by: Johan Hedberg <johan.hedberg@intel.com>
This is initial patch to add tests for new USB device support.
The test uses USB host support and virtual USB bus by default,
but should work on real hardware as well. For now, only the
Get Configuration and Set Interface requests are tested by default.
More tests will follow.
Signed-off-by: Johann Fischer <johann.fischer@nordicsemi.no>
Do not explicitly check buf parameter in usbh_req_setup()
but add ASSERT to check unresolved data stage conditions.
Signed-off-by: Johann Fischer <johann.fischer@nordicsemi.no>
Add command to get the current device configuration.
Revise the shell part to have a set|get configuration
subcommands.
Signed-off-by: Johann Fischer <johann.fischer@nordicsemi.no>
With the latest change, there is no need for this structure
to be used as a completion handler.
Signed-off-by: Johann Fischer <johann.fischer@nordicsemi.no>
Use the USB device structure and wrappers introduced earlier.
With this patch, users of ch9 requests do not need to work
directly with the UHC API. The requests are now blocked until
there is a response from the UHC. Callers finally have access
to the data buffer and request status.
Signed-off-by: Johann Fischer <johann.fischer@nordicsemi.no>
Add a structure to represent a USB device and wrappers to avoid
glue UHC calls when operating on devices. Although there is a long
road to device configuration and management, we can start with
the tools that can also be used for USB device support testing.
Signed-off-by: Johann Fischer <johann.fischer@nordicsemi.no>
Remove ugly hack to call class driver ops.
This is preparation for later changes where we will change
parts to work on structure that represents USB device and
not on glue UHC functions.
Signed-off-by: Johann Fischer <johann.fischer@nordicsemi.no>
The current approach is a bit impractical in the upper layer.
This patch removes the two fifos that hold the transfer buffers
and replaces them with a byte array for the setup packet and
a pointer to a data buffer. The data buffer is mandatory for
all types of transfers except control without a data stage.
The waste of eight unused bytes for non-control transfers should
be insignificant, since an additional pointer would be at least
half of it, and then there would be the overhead of handling it.
This patch also clean up the transfer flags, rename owner to callback
as it reflects the upper layer use case, and add an additional member
to hold the pointer to the USB device (peripheral on the bus).
Signed-off-by: Johann Fischer <johann.fischer@nordicsemi.no>
Aling with the changes in UDC done in the commit ad81b3b797
("drivers: udc: move transfer status to buffer info structure")
This allows us to get the result of synchronous transfer and
simplify uhc_submit_event().
Signed-off-by: Johann Fischer <johann.fischer@nordicsemi.no>
Rename usbh_class_code to usbh_code_triple and remove reserved
member to bettter reflect the purpose of this structure.
Remove unused struct usbh_peripheral.
Signed-off-by: Johann Fischer <johann.fischer@nordicsemi.no>
There were a few small nits that were pointed out in the initial PR.
Fixes the LOG_ macro in the arm elf implementation, replaces a few stray
mentions of modules in llext.h with extensions.
Signed-off-by: Tom Burdick <thomas.burdick@intel.com>
Generate index of west projects and information about them.
Based on an extension from sdk-nrf repo.
Signed-off-by: Anas Nashif <anas.nashif@intel.com>
