Introduce DesignWare ARC Data Fusion IP Subsystem(DFSS) SPI
driver for ARC boards, i.e. EMSDP, which uses DW SPI to controll
SPI-Flash and DFSS SPI to connect external devices. Both drivers
share most source code, but DFSS uses ARC auxiliary registers.
Move FIFO depth setting to device tree.
Signed-off-by: Siyuan Cheng <siyuanc@synopsys.com>
Change automated searching for files using "IRQ_CONNECT()" API not
including <zephyr/irq.h>.
Signed-off-by: Gerard Marull-Paretas <gerard.marull@nordicsemi.no>
Adds a new spi_transcieve_cb API which enables asynchronous
SPI transactions with callback notification.
The exist spi_transcieve_async API remains and uses the new
spi_transcieve_cb API to provide a k_poll_signal notifier.
The driver API changes to provide a callback and userdata
parameter to async transcieve. All drivers in the tree
have been updated to the change.
Signed-off-by: Tom Burdick <thomas.burdick@intel.com>
In order to bring consistency in-tree, migrate all drivers to the new
prefix <zephyr/...>. Note that the conversion has been scripted, refer
to #45388 for more details.
Signed-off-by: Gerard Marull-Paretas <gerard.marull@nordicsemi.no>
The device PM subsystem _depends_ on device, not vice-versa. Devices
only hold a reference to struct pm_device now, and initialize this
reference with the value provided in Z_DEVICE_DEFINE. This requirement
can be solved with a forward struct declaration, meaning there is no
need to include device PM headers.
Signed-off-by: Gerard Marull-Paretas <gerard.marull@nordicsemi.no>
In case when we have multiple devices connected to the
one SPI interface the initial state of CS gpios after
MCU reset is floating and it might be low that prevents us from
communicating between particular devices. Fix that by
initializing all provided cs gpios and setting them as inactive.
Signed-off-by: Bartosz Bilas <bartosz.bilas@hotmail.com>
Busy check APIs now return boolean type. Due to that change, the
function names have also been adjusted. The common name pattern for
boolean check type APIs is "PREFIX_is_CONDITION". For example,
"pm_device_is_busy". pm_device_busy_check has been renamed to
pm_device_is_busy and pm_device_any_busy_check to pm_device_is_any_busy.
Signed-off-by: Gerard Marull-Paretas <gerard.marull@nordicsemi.no>
The following device busy APIs:
- device_busy_set()
- device_busy_clear()
- device_busy_check()
- device_any_busy_check()
were used for device PM, so they have been moved to the pm subsystem.
This means they are now prefixed with `pm_` and are defined in
`pm/device.h`.
If device PM is not enabled dummy functions are now provided that do
nothing or return `-ENOSYS`, meaning that the functionality is not
available.
Signed-off-by: Gerard Marull-Paretas <gerard.marull@nordicsemi.no>
We can utilize the devicetree macros to determine which instances to
enable. This will allow us to phase out the per instance Kconfig
symbols.
Signed-off-by: Kumar Gala <kumar.gala@linaro.org>
Nothing sets the op mode to anything but master. For now default the
mode to master-only and we can determine a devicetree property in the
future if we need to support other configurations.
Signed-off-by: Kumar Gala <kumar.gala@linaro.org>
Replace Kconfig symbols SPI_DW_PORT_n_INTERRUPT_SINGLE_LINE with just
seeing how many IRQs are defined in the devicetree to determine single
or multiline interrupt support.
Signed-off-by: Kumar Gala <kumar.gala@linaro.org>
The SoC that utilized the clock support isn't supported in Zephyr
anymore and there are no users of this code. Remove it for now as it
should get converted to utilize devicetree if needed in the future.
Signed-off-by: Kumar Gala <kumar.gala@linaro.org>
- Remove SYS_ prefix
- shorten POWER_MANAGEMENT to just PM
- DEVICE_POWER_MANAGEMENT -> PM_DEVICE
and use PM_ as the prefix for all PM related Kconfigs
Signed-off-by: Anas Nashif <anas.nashif@intel.com>
Keep locking for SPI_LOCK_ON from the first call of transceive until
spi_release release the lock. Use owner parameter to in the spi_context
to store the owner of the lock.
The locking is in line with the SPI_HOLD_ON_CS
Signed-off-by: Stefan Bigler <stefan@bigler.io>
Now that device_api attribute is unmodified at runtime, as well as all
the other attributes, it is possible to switch all device driver
instance to be constant.
A coccinelle rule is used for this:
@r_const_dev_1
disable optional_qualifier
@
@@
-struct device *
+const struct device *
@r_const_dev_2
disable optional_qualifier
@
@@
-struct device * const
+const struct device *
Fixes#27399
Signed-off-by: Tomasz Bursztyka <tomasz.bursztyka@linux.intel.com>
Towards cleaning up (and hopefully removing dts_fixup.h in the near
future). We need to move the handling of different names for the irq
flag propety into the driver and out of dts_fixup.h.
Signed-off-by: Kumar Gala <kumar.gala@linaro.org>
Need to set device busy when enter into transceive function
in SPI DW driver.
In current SPI DW driver the transceive function don't set busy state,
but that is important for PM busy state.
This will lead to unexpected behaviors when system calls this
function and enter into idle state.
Signed-off-by: Maksim Masalski <maksim.masalski@intel.com>
Signed-off-by: Anas Nashif <anas.nashif@intel.com>
This board and SoC was discontinued some time ago and is currently not
maintained in the zephyr tree.
Remove all associated configurations and variants from the tree.
Signed-off-by: Anas Nashif <anas.nashif@intel.com>
The spi_dw driver used system clock frequency
as a base for SPI bus frequency calculation.
This commit corrects that by obtaining the needed value from DTS.
Signed-off-by: Piotr Zięcik <piotr.ziecik@nordicsemi.no>
move misc/util.h to sys/util.h and
create a shim for backward-compatibility.
No functional changes to the headers.
A warning in the shim can be controlled with CONFIG_COMPAT_INCLUDES.
Related to #16539
Signed-off-by: Anas Nashif <anas.nashif@intel.com>
move spi.h to drivers/spi.h and
create a shim for backward-compatibility.
No functional changes to the headers.
A warning in the shim can be controlled with CONFIG_COMPAT_INCLUDES.
Related to #16539
Signed-off-by: Anas Nashif <anas.nashif@intel.com>
move clock_control.h to drivers/clock_control.h and
create a shim for backward-compatibility.
No functional changes to the headers.
A warning in the shim can be controlled with CONFIG_COMPAT_INCLUDES.
Related to #16539
Signed-off-by: Anas Nashif <anas.nashif@intel.com>
move sys_io.h to sys/sys_io.h and
create a shim for backward-compatibility.
No functional changes to the headers.
A warning in the shim can be controlled with CONFIG_COMPAT_INCLUDES.
Related to #16539
Signed-off-by: Anas Nashif <anas.nashif@intel.com>
Move internal and architecture specific headers from include/drivers to
subfolder for interrupt_controller:
include/drivers/interrupt_controller/
Signed-off-by: Anas Nashif <anas.nashif@intel.com>
Rename reserved function names in drivers/ subdirectory. Update
function macros concatenatenating function names with '##'. As
there is a conflict between the existing gpio_sch_manage_callback()
and _gpio_sch_manage_callback() names, leave the latter unmodified.
Signed-off-by: Patrik Flykt <patrik.flykt@intel.com>
Instance 2 & 3 for some reason never transitioned CONFIG_SPI_*_IRQ_* to
DT prefix. Fix that since those Kconfig symbols will never exist.
Signed-off-by: Kumar Gala <kumar.gala@linaro.org>
All drivers require DTS for their primary SPI settings.
Removing SPI_[0-9]_NAME config option added some more samples changes.
Usage of these options there was anyway not relevant.
Fixes#11064
Signed-off-by: Tomasz Bursztyka <tomasz.bursztyka@linux.intel.com>
Signed-off-by: Kumar Gala <kumar.gala@linaro.org>
These changes were obtained by running a script created by
Ulf Magnusson <Ulf.Magnusson@nordicsemi.no> for the following
specification:
1. Read the contents of all dts_fixup.h files in Zephyr
2. Check the left-hand side of the #define macros (i.e. the X in
#define X Y)
3. Check if that name is also the name of a Kconfig option
3.a If it is, then do nothing
3.b If it is not, then replace CONFIG_ with DT_ or add DT_ if it
has neither of these two prefixes
4. Replace the use of the changed #define in the code itself
(.c, .h, .ld)
Additionally, some tweaks had to be added to this script to catch some
of the macros used in the code in a parameterized form, e.g.:
- CONFIG_GPIO_STM32_GPIO##__SUFFIX##_BASE_ADDRESS
- CONFIG_UART_##idx##_TX_PIN
- I2C_SBCON_##_num##_BASE_ADDR
and to prevent adding DT_ prefix to the following symbols:
- FLASH_START
- FLASH_SIZE
- SRAM_START
- SRAM_SIZE
- _ROM_ADDR
- _ROM_SIZE
- _RAM_ADDR
- _RAM_SIZE
which are surprisingly also defined in some dts_fixup.h files.
Finally, some manual corrections had to be done as well:
- name##_IRQ -> DT_##name##_IRQ in uart_stm32.c
Signed-off-by: Andrzej Głąbek <andrzej.glabek@nordicsemi.no>
Makes the designware spi driver consistent with other spi drivers by
selecting HAS_DTS_SPI in the driver. This required adding spi nodes and
dts fixups to several arc and x86 socs, as well as enabling those nodes
in associated boards.
Also refactors the driver to use the base address, interrupt number, and
interrupt priority from dts.
Signed-off-by: Maureen Helm <maureen.helm@nxp.com>
This is a rare but valid case when you request the controller to send
dummy bytes on your behalf (it saves memory as you don't need to provide
a valid buffer, just NULL and the numbers of dummy bytes as length).
Without it, user code can get stuck into interrupt loop.
Signed-off-by: Tomasz Bursztyka <tomasz.bursztyka@linux.intel.com>
According to data sheet of dw_spi, ser reg is used to
select spi device/slave.
one bit in ser maps to one spi device/slave, i.e..
cs 0 ---> bit 0
cs 1 ---> bit 1
cs 2 ---> bit 2
the original code has a bug. the config->slave cannot
directly be written into ser. It should be mapped to
the correct bits through 1 << config->slave.
Signed-off-by: Wayne Ren <wei.ren@synopsys.com>
