The PHYTEC phyboard_lyra_am62x board was renamed to phyboard_lyra
to simplify the board name.
The PHYTEC phycore_am62x board was renamed and moved into
phyboard_lyra as phyboard_lyra/am6234/a53.
Signed-off-by: Daniel Schultz <d.schultz@phytec.de>
Both phyBOARD-Lyra AM62x boards were called
phyboard_lyra_am62x/am6234/a53 or phyboard_lyra_am62x/am6234/m4.
Since the AM62x SOC part number is now included in the board name
as am6234, there is no need to have am62x in the board name itself.
Moreover, PHYTEC also has an AM62Ax SOM which comes with the same
carrier-board. Integration of this kit would be easier later.
Signed-off-by: Daniel Schultz <d.schultz@phytec.de>
phyBOARD-Lyra AM62x is the official name for our kit, which we
use to develop our reference software. This kit includes the
phyCORE-AM62x with TI's AM62x SoC.
Rename the phycore_am62x_am6234_a53 board to phyboard_lyra_am62x_am6234_a53
and move all code into the phyboard_lyra_am62x directory. Thereby, the
A53 and M4 boards are located in the same directory and both named
correctly.
This is also a good chance to update documentation for both cores and
use links to our latest BSPs as well as our official AM62x Yocto machine
name for the AM62x HS-FS SOM.
Signed-off-by: Daniel Schultz <d.schultz@phytec.de>
Enable serial interface on i.MX8ULP.
This also includes a SHA update for hal_nxp which
pulls in the following commits relevant to Zephyr:
* 3366f234ed47 build: hal_nxp: add TPM counter support
* 6544455fcf46 Compile in PXP driver if LVGL is set to use
PXP.
* 31463a848bcd devices: MIMX8UD7: add definition for
LPUART_RX_TX_IRQS
Signed-off-by: Laurentiu Mihalcea <laurentiu.mihalcea@nxp.com>
bst_delete() is called from an ON_EXIT hook, which can be called
several times if an exit hook itself fails and calls exit on
its own.
This is not what most tests destructors will expect, and they
may do weird things in this case. So let's not call into it again.
Signed-off-by: Alberto Escolar Piedras <alberto.escolar.piedras@nordicsemi.no>
Replace direct access to RESET register to control the network CPU with
dedicated API, which allows safely sharing the network CPU with other
users.
Signed-off-by: Jędrzej Ciupis <jedrzej.ciupis@nordicsemi.no>
Added arduino pin definition for nRF5340 audio DK network core,
so we can use nrf21540-ek easily with SDC.
Signed-off-by: Jui-Chou Chung <jui-chou.chung@nordicsemi.no>
Remove IPSP support from the tree.
It has no maintainers, and is regularly broken. The fact that it's
nontrivial to set-up in linux makes it hard to fix reported issues.
Signed-off-by: Jonathan Rico <jonathan.rico@nordicsemi.no>
Add support for USBOTG on RW612 BGA board. This support was tested with
the USB console sample, as well as the USB DFU sample.
Signed-off-by: Daniel DeGrasse <daniel.degrasse@nxp.com>
Board name contains the `adsp` suffix and so should the
defconfig. Otherwise, the build system won't be able to
fetch the board configurations.
Signed-off-by: Laurentiu Mihalcea <laurentiu.mihalcea@nxp.com>
CSS was deprecated from the mcu-sdk. Removing driver from lpc55s36
to clear build error.
This is a temporary patch to remove the build error.
Fixes#69961
Signed-off-by: David Leach <david.leach@nxp.com>
XenVM boards were mark as unsupported for twister testcases related to
userspace. After additional investigation no problems were found for
builds, so there are no reason to exclude it from test runs.
Signed-off-by: Dmytro Firsov <dmytro_firsov@epam.com>
Update the booting information in recently added
Espressif boards to include simple boot method.
Signed-off-by: Marek Matej <marek.matej@espressif.com>
Update documents about adding Arduino UNO R4 WiFi.
Adding a description that a debug adapter is required when
flashing and debugging.
Signed-off-by: TOKITA Hiroshi <tokita.hiroshi@gmail.com>
The current memory mapped stack code requires actual physical
addresses for stacks, and cannot deal with stacks already using
virtual addresses. So disable mapped stack via defconfig.
Note that this is done before enabling memory mapped stacks on
x86 so test won't fail when the support in the architecture
code is introduced.
Signed-off-by: Daniel Leung <daniel.leung@intel.com>
Adjustments of dts and defconfig files to adjust for the MERGE removal.
The revert of MERGE requires specific dts and defconfig files for boards
which relied on the MERGE feature.
Signed-off-by: Torsten Rasmussen <Torsten.Rasmussen@nordicsemi.no>
Splits configuration up that was merged as part of hwmv2 due to
the merged configuration feature being reverted
Signed-off-by: Jamie McCrae <jamie.mccrae@nordicsemi.no>
This adds support for the usb cdc on the k1 board
Tested using samples/subsys/usb/cdc_acm
Co-developed-by: Axel Haslam <ahaslam@baylibre.com>
Signed-off-by: Axel Haslam <ahaslam@baylibre.com>
Signed-off-by: Philip Molloy <pmolloy@baylibre.com>
This commit enables pinctrl on i.MX8ULP. This includes:
1) Adding `pinctrl_soc.h` header file.
2) Adding DTS node for IOMUXC1, which is one of the
IPs responsible for managing the 8ULP pads.
3) Adding .dtsi with pin definitions. For now, only
the LPUART7 pads are added to this file because this
is going to be the only consummer for now.
4) Modifying the `pinctrl_imx.c` driver to work for 8ULP.
5) Enabling the `CONFIG_HAS_MCUX_IOMUXC`, which is a
dependency of `CONFIG_PINCTRL_IMX`.
Signed-off-by: Laurentiu Mihalcea <laurentiu.mihalcea@nxp.com>
240MHz as APB3 bus clock is too fast to set I2C base bus speed.
Set bus pre-scaler to 2 and reach a safe 120MHz.
This commit is very similar to
456183f982.
Signed-off-by: Jeppe Odgaard <jeppe.odgaard@prevas.dk>
Add "RaspberryPi Pico to UNO FlexyPin Adapter".
It is a converter-PCB to Arduino UNO form-factor
from Raspberry Pi Pico that is released in Open Source Hardware.
Signed-off-by: TOKITA Hiroshi <tokita.hiroshi@gmail.com>
stm32l1_disco board from STMicroelectronics has eeprom and watchdog.
Enable those peripherals.
Tested using:
1. samples/drivers/eeprom
2. samples/drivers/watchdog
Signed-off-by: Maxin John <maxin.john@gmail.com>
LPTIM4 is selected, since it is used only for internal timing
and it doesn't support output/input
Signed-off-by: Adam Berlinger <adam.berlinger@st.com>
This adds DT aliases for LED and button used in recovery mode of the
MCUboot bootloader, on the 'nucleo_wb55rg' board.
Signed-off-by: Piotr Dymacz <pepe2k@gmail.com>
The SparkFun Pro Micro header pins are numbered D1, D0, GND, ... from top
left whereas the SparkFun Pro Micro RP2040 and the Adafruit KB2040 boards
are using gpio 0, 1, GND, ... , so the pro_micro: connector gpio-map of
these boards should reflect that.
Graphical Datasheet for SparkFun Pro Micro RP2040:
https://cdn.sparkfun.com/assets/e/2/7/6/b/ProMicroRP2040_Graphical_Datasheet.pdf
Graphical Datasheet for SparkFun Pro Micro:
https://cdn.sparkfun.com/assets/f/d/8/0/d/ProMicro16MHzv2.pdf
Pinout of the Adafruit KB2040:
https://learn.adafruit.com/assets/106984
Please note that the KB2040 uses CircuitPython pin labels D0, D1 which does
not seemt correspond to the Arduino labels D0 and D1 used by the Pro Micro.
Signed-off-by: Daniel Irekvist <ulmanyar@gmail.com>
Was getting the error "parse error: expected number or parenthesized
expression" when trying to compile with the
-DSHIELD=seeed_xiao_expansion_board flag. It looks like INPUT_KEY_0
was missing the necessary include file so I added it in.
Signed-off-by: Graham Harrison <graham.harrison@axcendcorp.com>
This commit removes the `Kconfig.core` file. It's been largely unused, and
the only symbol it provides (`RISCV_CORE_E31`) overlaps with the SoC-layer
provided `SOC_SERIES_SIFIVE_FREEDOM_FE300`.
As of date, the only SoC that uses the E31 core in Zephyr is the FE310 SoC.
Signed-off-by: Filip Kokosinski <fkokosinski@antmicro.com>
Add support for the RD RW612 BGA board for the adafruit_2_8_tft_touch_v2
shield. This board uses a custom LCDIC MIPI DBI controller, which
requires a specific board overlay to enable the shield.
Signed-off-by: Daniel DeGrasse <daniel.degrasse@nxp.com>
Enable support for LCDIC on rd_rw612_bga. This support also enables
acceleration features such as DMA for LVGL, to improve performance
Signed-off-by: Daniel DeGrasse <daniel.degrasse@nxp.com>
Add pinctrl and board enablement for LPUART2, which is broken out to
P4_2 and P4_3 on the FRDM board.
Signed-off-by: Daniel DeGrasse <daniel.degrasse@nxp.com>
