This commit adds the ARMv8.1-M M-Profile Vector Extension (MVE)
configurations as well as the compiler flags to enable it.
The M-Profile Vector Extension consists of the MVE-I and MVE-F
instruction sets which are integer and floating-point vector
instruction sets, respectively.
The MVE-I instruction set is a superset of the ARM DSP instruction
set (ARMv7E-M) and therefore depends on ARMV8_M_DSP, and the MVE-F
instruction set is a superset of the ARM MVE-I instruction set and
therefore depends on ARMV8_1_M_MVEI.
The SoCs that implement the MVE instruction set should select the
following configurations:
select ARMV8_M_DSP
select ARMV8_1_M_MVEI
select ARMV8_1_M_MVEF (if floating-point MVE is supported)
The GCC compiler flags for the MVE instruction set are specified
through the `-mcpu` flag.
In case of the Cortex-M55 (the only supported processor type for
ARMv8.1-M at the time of writing), the `-mcpu=cortex-m55` flag, by
default, enables all the supported extensions which are DSP, MVE-I and
MVE-F.
The extensions that are not supported can be specified by appending
`+no(ext)` to the `-mcpu=cortex-m55` flag:
-mcpu=cortex-m55 Cortex-M55 with DSP + MVE-I + MVE-F
-mcpu=cortex-m55+nomve.fp Cortex-M55 with DSP + MVE-I
-mcpu=cortex-m55+nomve Cortex-M55 with DSP
-mcpu=cortex-m55+nodsp Cortex-M55 without any extensions
Signed-off-by: Stephanos Ioannidis <root@stephanos.io>
The TLS global pointer is only set during context switch.
So for the first switch to main thread, the TLS pointer
is NULL which would cause access violation when trying
to access any thread local variables in main thread.
Fix it by setting it before going into main thread.
Signed-off-by: Daniel Leung <daniel.leung@intel.com>
Cleanup an #ifdef statement in swap_helper.S; use
ARMV6_M_ARMV8_M_BASELINE instead of listing all
Cortex-M baseline implementation variants. This
fixes an issue with Cortex-M23 whose Kconfig
define was not included in the original list.
Signed-off-by: Ioannis Glaropoulos <Ioannis.Glaropoulos@nordicsemi.no>
When inside an escalated HardFault, we would like to get
more information about the reason for this escalation. We
first check if the reason for thise escalation is an SVC,
which occurs within a priority level that does not allow
it to trigger (e.g. fault or another SVC). If this is true
we set the error reason according to the provided argument.
Only when this is not a synchronous SVC that caused the HF,
do we check the other reasons for HF escalation (e.g. a BF
inside a previous BF).
We also add a case for a debug event, to complete going through
the available flags in HFSR.
Finally we ASSERT if we cannot find the reason for the escalation.
Signed-off-by: Ioannis Glaropoulos <Ioannis.Glaropoulos@nordicsemi.no>
Move the assessment of a synchronous SVC error into a
separate function. This commit does not introduce any
behavioral changes.
Signed-off-by: Ioannis Glaropoulos <Ioannis.Glaropoulos@nordicsemi.no>
Clean up a few more hard-coded constants
in swap_helper.S and replace them with
CMSIS-like defines in cpu.h. No behavioral
changes in this commit.
Signed-off-by: Ioannis Glaropoulos <Ioannis.Glaropoulos@nordicsemi.no>
When locking interrupt in a critical session, it is
safer to do MSR BASEPRI_MAX instead of BASEPRI. The
rationale is that when writing to BASEPRI_MAX, the
writing is conditional, and is only applied if the
change is to a higher priority level. This commit
replaces BASEPRI with BASEPRI_MAX in operations that
aim to lock some specific interrupts:
- irq_lock()
- masking out PendSV
So, for example, it is not possible to actually
unmask any interrupts by doing an irq_lock operation.
The commit does not introduce behavioral changes.
However, it makes irq_lock() more robust against
future changes to the IRQ locking mechanism.
Signed-off-by: Ioannis Glaropoulos <Ioannis.Glaropoulos@nordicsemi.no>
Baseline Cortex-M requires VTOR to be aligned on 64-word
boundary. That is because bit-7 of VTOR is also RAZ/WI.
The commit updates the vector table section alignment for
Baseline Cortex-M to reflect the implementation constraint.
Signed-off-by: Ioannis Glaropoulos <Ioannis.Glaropoulos@nordicsemi.no>
Platform specific initialization during early boot
has been a feature supported only by Cortex-M; the
Kconfig symbol is define in arch/arm Kconfig space.
We rename the z_platform_init() function to
z_arm_platform_init(), to indicate more clearly that
this is an internal, private ARM-only API.
This commit does not introduce behavioral changes.
Signed-off-by: Ioannis Glaropoulos <Ioannis.Glaropoulos@nordicsemi.no>
Platform specific initialization during early boot
has been a feature supported only by Cortex-M; the
Kconfig symbol is defined in arch/arm Kconfig space.
We rename the z_platform_init() function to
z_arm_platform_init(), to indicate more clearly that
this is an internal, private ARM-only API.
This commit does not introduce behavioral changes.
Signed-off-by: Ioannis Glaropoulos <Ioannis.Glaropoulos@nordicsemi.no>
If the DebugMonitor extension is implemented by the core,
the interrupt may be pended and become active, even if it
is not enabled. Set the priority level of DebugMonitor upon
system initialization to the intended value unconditionally
so we do not end up in undefined behavior, if the exception
is accidentally pended. Since the priority level is set at
init, we can remove resetting the priority in DWT driver
initialization.
Signed-off-by: Ioannis Glaropoulos <Ioannis.Glaropoulos@nordicsemi.no>
When the SoC implements SysTick, but the system
does not use it as the driver for system timing
we still need to set its interrupt level. This
is because the SysTick IRQ is always enabled,
so we must ensure the interrupt priority is set
to a level lower than the kernel interrupts (for
the assert mechanism to work properly) in case
the SysTick interrupt is accidentaly raised.
Signed-off-by: Ioannis Glaropoulos <Ioannis.Glaropoulos@nordicsemi.no>
If the PendSV interrupt is not used by Zephyr (this is
the case when we build with single-thread support) we
route the interrupt to z_arm_exc_spurious, instead of
assigning 0 to the vector table entry. This is because
the interrupt is always enabled and always exists, so
it is safer to always get the proper error report, in
case we accidentally pend the PendSV, for any reason.
We also add a comment in the PendSV priority setting,
explaining why it has to be assigned a priority level
even if it is not used.
Signed-off-by: Ioannis Glaropoulos <Ioannis.Glaropoulos@nordicsemi.no>
Create z_arm_preempted_thread_in_user_mode to abstract the
implementation differences between Cortex-M and R to determine if an
exception came from userspace.
Signed-off-by: Bradley Bolen <bbolen@lexmark.com>
Create z_arm_thread_is_user_mode to abstract the implementation
differences between Cortex-M and R to determine if the current thread is
in user or kernel mode.
Signed-off-by: Bradley Bolen <bbolen@lexmark.com>
Most arch's CMakeLists.txt contain rules to add compiler and linker
flags for coverage if CONFIG_COVERAGE is enabled, but 4 of them were
missing this.
Instead, set the coverage flags in arch/common/CMakeLists.txt which
affects all archs.
Signed-off-by: Jeremy Bettis <jbettis@chromium.org>
Also, this eases readability.
The new API can be used any time all FP registers must be manually
saved and restored for an operation.
Signed-off-by: Øyvind Rønningstad <oyvind.ronningstad@nordicsemi.no>
Most of the code for the three exception functions is identical so use
macros to make things easier to read.
Signed-off-by: Bradley Bolen <bbolen@lexmark.com>
Use the context switch macro for z_arm_cortex_r_svc to be more clear
about the svc call being executed.
Signed-off-by: Bradley Bolen <bbolen@lexmark.com>
Shrink the name of the hidden cortex-m option for the
null-pointer dereference detection feature.
Signed-off-by: Ioannis Glaropoulos <Ioannis.Glaropoulos@nordicsemi.no>
Reduce the length of the Kconfig defines related to
null-pointed dereference detection in Cortex-M.
Signed-off-by: Ioannis Glaropoulos <Ioannis.Glaropoulos@nordicsemi.no>
If single thread builds are not supported by the
architecture, the MULTITHREADING option should be
prompt-less to block any modifications to it. We
also introduce an explicit ARCH-level Kconfig that
reflects whether the ARCH is capable of single-thread
Zephyr builds.
Signed-off-by: Ioannis Glaropoulos <Ioannis.Glaropoulos@nordicsemi.no>
In case CONFIG_NOCACHE_MEMORY=y, the D-Cache need to be clean and
invalidated before enabling the MPU to make sure no data from a
__nocache__ region is present in the D-Cache.
If the D-Cache is disabled, SCB_CleanInvalidateDCache() shall not be
used as it might contains random data for random addresses, and this
might just create a bus fault.
Signed-off-by: Aurelien Jarno <aurelien@aurel32.net>
On reset we do not know what is the status of the D-Cache, nor its
content.
If it is disabled, do not try to clean it, as it might contains random
data for random addresses, and this might just create a bus fault.
Invalidating it is enough.
If it is enabled, it means its content is not random.
SCB_InvalidateDCache() will clean it, invalidate it and disable it.
Signed-off-by: Aurelien Jarno <aurelien@aurel32.net>
This adds code to swap_helper.S which does special handling of LR when
the interrupt came from secure. The LR value is stored to memory, and
put back into LR when swapping back to the relevant thread.
Also, add special handling of FP state when switching from secure to
non-secure, since we don't know whether the original non-secure thread
(which called a secure service) was using FP registers, so we always
store them, just in case.
Signed-off-by: Øyvind Rønningstad <oyvind.ronningstad@nordicsemi.no>
Introduce a Kconfig option to allow Secure function calls to be
pre-empted.
Signed-off-by: Ioannis Glaropoulos <Ioannis.Glaropoulos@nordicsemi.no>
Signed-off-by: Øyvind Rønningstad <oyvind.ronningstad@nordicsemi.no>
Setup the static MPU regions before PRE_KERNEL_1 and
PRE_KERNEL_2 functions are invoked. This will setup
the MPU for SRAM regions in case code relocated to SRAM
is invoked from any of these functions.
Signed-off-by: Mahesh Mahadevan <mahesh.mahadevan@nxp.com>
Code relocated using CONFIG_CODE_DATA_RELOCATION_SRAM should
be allowed to execute from SRAM
Signed-off-by: Mahesh Mahadevan <mahesh.mahadevan@nxp.com>
1. This will help us identify if the relocation is to
SRAM which is used when setting up the MPU entry
for the SRAM region where code is relocated
2. Move CODE_DATA_RELOCATION configs to ARM specific
folder
Signed-off-by: Mahesh Mahadevan <mahesh.mahadevan@nxp.com>
CONFIG_FPU: The architecture dependency list is redundant.
Having CPU_HAS_FPU being selected by those archs as a dependency
is sufficient and cleaner.
CONFIG_FPU_SHARING: The default should always be y to be on the safe
side here, but as a compromise for not affecting existing config, let's
move the default selection local to those configs that care, again to
avoid a growing list of conditionals here. Adjust the help text which
applies to more than just Cortex-M.
Signed-off-by: Nicolas Pitre <npitre@baylibre.com>
There is a possibility that the DWT frequency calculation
is divided by zero. So this fixes the issue by repeatedly
trying to get the delta clock cycles and delta DWT cycles
until they both are not zero.
Signed-off-by: Daniel Leung <daniel.leung@intel.com>
Reboot functionality has nothing to do with PM, so move it out to the
subsys/os folder.
Signed-off-by: Gerard Marull-Paretas <gerard.marull@nordicsemi.no>
bus_fault() and hard_fault() were missing final else statement
in the if else if constructs. This commit adds non-empty else {}
to comply with coding guideline 15.7.
Signed-off-by: Jennifer Williams <jennifer.m.williams@intel.com>
z_arm_debug_monitor_event_error_check() was missing final
else statement in the if else if construct so violated guideline
15.7. This commit removes the else if for symmetry in the limited
early-exit conditions, rather than empty final else {}, to comply.
Signed-off-by: Jennifer Williams <jennifer.m.williams@intel.com>
Inline some minor clarifications regarding the
Lazy Stacking feature in the cortex-m pendSV
handler, for ease of understanding. Also, fix
some minor style issues in comments.
Signed-off-by: Ioannis Glaropoulos <Ioannis.Glaropoulos@nordicsemi.no>
Some of these registers may contain nuggets of information that would be
beneficial when debugging, so include them in the fault dump.
Signed-off-by: Bradley Bolen <bbolen@lexmark.com>
Do not hardcode the array size in the loop for printing out the floating
point registers of the exception stack frame. The size of this array
will change when Cortex-R support is added.
Signed-off-by: Bradley Bolen <bbolen@lexmark.com>
When CONFIG_MULTITHREADING=n kernel specific pendsv is not used. Remove
from vector table.
Signed-off-by: Krzysztof Chruscinski <krzysztof.chruscinski@nordicsemi.no>
The GIC can return 0x3ff to indicate a spurious interrupt. Other
interrupt controllers could return something different. Check that the
pending interrupt is valid in order to avoid indexing past the end of
the isr_table.
This fixes#30465 and is based on the aarch64 fix in 9dd2731d.
Signed-off-by: Bradley Bolen <bbolen@lexmark.com>
Flag was present only when ZLI was enabled. That resulted in additional
ifdefs needed whenever code supports ZLI and non-ZLI mode.
Removed ifdefs, added build assert to irq connections to fail at
compile time if IRQ_ZERO_LATENCY is set but ZLI is disabled. Additional
clean up made which resulted from removing the ifdef.
Signed-off-by: Krzysztof Chruscinski <krzysztof.chruscinski@nordicsemi.no>
Both operands of an operator in which the usual arithmetic
conversions are performed shall have the same essential
type category.
Signed-off-by: Flavio Ceolin <flavio.ceolin@intel.com>
Add a note in the Kconfig help text that explains why Hard ABI
is not possible on builds with TF-M.
Signed-off-by: Ioannis Glaropoulos <Ioannis.Glaropoulos@nordicsemi.no>
When building with TFM, the app is linked with libraries built by the
TFM build system. TFM is always built with -msoft-float which is
equivalent to -mfloat-abi=soft. FP_HARDABI adds -mfloat-abi=hard
which gives errors when linking with the libs from TFM since they are
built with a different ABI.
Fixes https://github.com/zephyrproject-rtos/zephyr/issues/33956
Signed-off-by: Øyvind Rønningstad <oyvind.ronningstad@nordicsemi.no>
