The `ARCH` init level was added to solve a specific problem, call init
code (SYS_INIT/devices) before `z_cstart` in the `intel_adsp` platform.
The documentation claims it runs before `z_cstart`, but this is only
true if the SoC/arch takes care of calling:
```c
z_sys_init_run_level(_SYS_INIT_LEVEL_ARCH);
```
Which is only true for `intel_adsp` nowadays. So in practice, we now
have a platform specific init level. This patch proposes to do things in
a slightly different way. First, level name is renamed to `EARLY`, to
emphasize it runs in the early stage of the boot process. Then, it is
handled by the Kernel (inside `z_cstart()` before calling
`arch_kernel_init()`). This means that any platform can now use this
level. For `intel_adsp`, there should be no changes, other than
`gcov_static_init()` will be called before (I assume this will allow to
obtain coverage for code called in EARLY?).
Signed-off-by: Gerard Marull-Paretas <gerard.marull@nordicsemi.no>
We have cases where some devices needs to be initialized very early and
before c_start is call, i.e. to setup very early console or to setup
memory. Traditionally this would be hardcoded as part of the soc layer
and not using device model or the init levels.
This patch adds a new level ARCH, which will be called in early
architecture code and before we jump to the kernel code.
Signed-off-by: Anas Nashif <anas.nashif@intel.com>
Clang 15 added a new warning type `-Wdeprecated-non-prototype` that
warns about the functions without prototypes, which have been
deprecated since the C89 and will not work in the upcoming C2x.
This commit disables the warning because Zephyr deliberately makes use
of the functions without prototypes to allow the use of a "generic"
function pointer (notoriously in the cbprintf implementation) and
Zephyr will not move to the C2x in the foreseeable future.
Signed-off-by: Stephanos Ioannidis <root@stephanos.io>
It's useful for RAMABLE_REGION to have a uniform name when
CODE_DATA_RELOCATION is supported, because otherwise the build system
needs to be aware of how the region name differs between architectures.
Since architectures tend to prefer one of 'SRAM' or 'RAM' for that
region, prefer to use 'RAM' as the more general term.
Signed-off-by: Peter Marheine <pmarheine@chromium.org>
This commit removes the `k_mem_pool` section for the memory pool API,
which was removed in the v2.5.0 release.
Signed-off-by: Stephanos Ioannidis <stephanos.ioannidis@nordicsemi.no>
Fixes: #45270
Zephyr Kconfig defines the settings BIG_ENDIAN.
Propagate this setting to the corresponding CMAKE_C_BYTE_ORDER and
CMAKE_CXX_BYTE_ORDER variables.
This also ensures that the CMake function 'is_big_endian()' reports the
correct endianess.
Signed-off-by: Torsten Rasmussen <Torsten.Rasmussen@nordicsemi.no>
Fixes: #49587
Try to detect sysroot for cross-compile toolchain if not specified by
the user with `-DSYSROOT_DIR=<path>`.
First, the C compiler is asked if it knows its sysroot, some C compilers
are able to return the sysroot, as an example:
> $ arm-none-eabi-gcc -print-sysroot
> <path>/bin/../arm-none-eabi
> $
but majority of gcc-based C compilers seems to return empty string:
> $ arm-zephyr-eabi-gcc --print-sysroot
> $
in such cases, the cross-compiler target CMake file will try to discover
the sysroot by searching for libc.a, starting one level up from the
compiler location.
If no sysroot candidate is found, a warning will be printed to the user.
If a single sysroot candidate is found, this candidate will be selected.
If multiply sysroot candidates are found, a warning is printed, and the
first candiate in the list is selected. User may select another
candidate with `-DSYSROOT_DIR=<use-this>`.
Signed-off-by: Torsten Rasmussen <Torsten.Rasmussen@nordicsemi.no>
Fixes: #49116
During development of out-of-tree boards and applications it is not
uncommon to refactor / restructure code.
To allow developers more freedom, let's check that board's defconfig
still exists during a CMake re-run.
If the defconfig no longer exists, either because it's been moved or
deleted, then warn the user and set BOARD_DIR to NOTFOUND.
The NOTFOUND will request CMake to search for the new location in all
board roots. If the board has not been found, as example it's deleted,
then the existing error is printed later.
Signed-off-by: Torsten Rasmussen <Torsten.Rasmussen@nordicsemi.no>
Fixes commit 7a85ff7683 ("add sparse support")
The sparse build needs (at least) two things:
1. sparse to be in the PATH
2. the environment variable REAL_CC to be defined and to match the
value expected by CMake
Fix error messages when either condition is wrong.
- New error message when 1. is not satisfied:
```
CMake Error at zephyr/cmake/compiler/gcc/target.cmake:12 (find_program):
Could not find CMAKE_C_COMPILER using the following names: cgcc
```
- Previous error "message" when 1. is not satisfied:
```
CMake Error at zephyr/cmake/compiler/gcc/target.cmake:17 (message):
C compiler
ZSDK/xtensa-intel_s1000_zephyr-elf/bin/xtensa-intel_s1000_zephyr-elf-gcc
not found - Please check your toolchain installation
```
Note the "not found" cross-compiler actually exists!
- New error message when 2. is not satisfied:
```
Kconfig header saved to 'ws/build-tgl/zephyr/include/generated/autoconf.h'
-- Found sparse: /home/user/sparse/cgcc
CMake Error at ws/zephyr/cmake/compiler/gcc/target.cmake:25 (message):
The only way to override its 'cc' default when cross-compiling with
sparse is unfortunately an environment variable. So you _must_ set
REAL_CC at both configuration time and build time to:
$ZSDK/xtensa-intel_s1000_zephyr-elf/bin/xtensa-intel_s1000_zephyr-elf-gcc
```
- Previous error "message" when 2. is not satisfied:
```
modules/hal/xtensa/include/xtensa/config/core.h:54:10:
error:unable to open 'core-isa.h'`
```
Also: stop using the same name REAL_CC for both the internal CMake
variable and the external sparse parameter; they're two different
things so name them differently. Environment variable messes are
complicated enough.
Signed-off-by: Marc Herbert <marc.herbert@intel.com>
After recent changes Zephyr became incompatible with old
MWDT versions (older than 2022.06).
Version checking may help to avoid build errors
related this incompatibility.
Signed-off-by: Nikolay Agishev <agishev@synopsys.com>
Fixes: #47588
Use `check_set_compiler_property(... "SHELL:-Wformat -W<format-option>")`
to ensure that compiler options requiring `-Wformat` to work properly
are tested with said option.
Signed-off-by: Torsten Rasmussen <Torsten.Rasmussen@nordicsemi.no>
Fixes: #47588
Kitware decided to fail compiler tests of single options if the
compiler reported only a warning and not an error:
github.com/Kitware/CMake/commit/f745e0497ee71d35fd1b3524b1636a72da76c266
which affects CMake 3.23.0 and 3.23.1
This change was later reverted in CMake >=3.23.2 and >=3.24.0
github.com/Kitware/CMake/commit/4941887d7defecb3016d2bd94d3a45754251ca56
Although the immediate issue is related to CMake, and has been fixed
reverted in later releases, then it still makes sense to be able to
group compiler options together that generally are depending on each
other to function correctly.
This commit introduces the possibility to group compiler options which
must be tested together.
It uses same approach as
> add_compile_options("SHELL:<option1> <option2> ...")
Usage:
> check_set_compiler_property(PROPERTY <property>
> "SHELL:<option1> <option2> ..."
> )
Will test the option together.
Signed-off-by: Torsten Rasmussen <Torsten.Rasmussen@nordicsemi.no>
As the TF-A was integrated into zephyr as a module. This adds necessary
CMake scripts to load BL1 and FIP binary built from TF-A.
Signed-off-by: Huifeng Zhang <Huifeng.Zhang@arm.com>
Creating a test_interface allows more complex unittest projects to
create additional libraries, for example mock libs, that can be re-used
between test projects.
To support the possibility of such libs to build with same flags as the
testbinary the test_interface is now populated with the public compile
and include flags from testbinary.
testbinary has been updated to use test_interface.
Signed-off-by: Torsten Rasmussen <Torsten.Rasmussen@nordicsemi.no>
Add a user-settable configuration value indicating whether the toolchain
selected by the cross-compile variant supports thread local storage, using
the default 'n' value to preserve compatibility with existing uses.
Signed-off-by: Keith Packard <keithp@keithp.com>
The Zephyr cross tools configuration which the 'xtools' variant supports
enables TLS, so set TOOLCHAIN_SUPPORTS_THREAD_LOCAL_STORAGE when using it.
Signed-off-by: Keith Packard <keithp@keithp.com>
ARC processors are highly configurable, so ARC toolchain supports
big amount of mcpu options for all that HW configurations.
As difference in many configurations among the same processor
family usually doesn't affect Zephyr code we don't want
to create Kconfig option for each possible CPU configuration
(just to map Kconfig option to correspondent mcpu value
in 'cmake/gcc-m-cpu.cmake').
Instead we prefer being able to set proper mcpu value
individually for any ARC SoC and using 'cmake/gcc-m-cpu.cmake'
just for reasonable defaults.
To apply SoC-related changes for build-options on early stages of building
'tune_build_ops.cmake' should be created in appropriate SoC directory.
Example:
./soc/arc/snps_qemu/tune_build_ops.cmake
File content:
set(GCC_ARC_TUNED_CPU hs4xd)
Signed-off-by: Nikolay Agishev <agishev@synopsys.com>
The current deprecation warning could give the impression that
CROSS_COMPILE is deprecated, which is not the case.
Instead it is the behavior of defaulting to `cross-compile` when
setting CROSS_COMPILE in environment without setting
ZEPHYR_TOOLCHAIN_VARIANT that is deprecated.
Not the use of `CROSS_COMPILE` setting itself.
Signed-off-by: Torsten Rasmussen <Torsten.Rasmussen@nordicsemi.no>
The commit c2419fc006 introduced a change
to the CMake toolchain detection routine in which it attempts to use
the distro-provided `gdb-multiarch` GDB executable when the target-
specific GDB executable cannot be found (i.e. fallback to
`gdb-multiarch`).
This can cause many problems for the Zephyr users because the distro-
provided GDB does not contain any Zephyr-specific patches and it may
misbehave under various conditions (e.g. negative tid/pid being
displayed, Xtensa debugging mysteriously failing, ARC debugging not
working).
This commit removes the fallback mechanism to the distro-provided
`gdb-multiarch` because it is better to display an error message saying
GDB is not found than to use a wrong GDB that can give out very
confusing and misleading error messages to users.
Moreover, this fallback mechanism is no longer necessary because the
Zephyr SDK is now available on all major host operating systems and it
provides the target-specific custom GDB that contains all Zephyr-
specific patches.
Signed-off-by: Stephanos Ioannidis <root@stephanos.io>
The Zephyr SDK 0.15.0 release has changed the default GDB executable to
be Python-less and introduced an alternate Python-capable variant
called `gdb-py` (note that the Zephyr SDK previously provided
`gdb-no-py` instead).
This commit updates the CMake toolchain detection routine to attempt
using the Python-capable GDB variant (gdb-py) first and, if it is not
available or fails to launch due to a missing libpython dependency,
use the Python-less GDB variant (gdb).
Signed-off-by: Stephanos Ioannidis <root@stephanos.io>
The use of `separate_arguments()` in extra_flags.cmake and
unittest.cmake prevents the use of proper CMake lists.
A CMake list can be specified on command line as:
`-DMY_LIST="itemA;itemB;itemC"`
Users are expected to be able to provide extra compile flags using CMake
lists, like `-DEXTRA_CFLAGS="--flag1;--flag2"` but also using space
separated lists, like: `-DEXTRA_CFLAGS="--flag1 --flag2"`.
However, the way FLAGS was passed to separate_arguments() would result
in a list being treated as extra arguments to the function and thus
result in a CMake error.
To allow the use of CMake lists, the length of the argument as a CMake
list is tested. This ensures that when the argument contains a
single `;` then the length is >1 and no conversion is needed.
This allows a user to freely choose between the two forms:
- `-DFLAGS="--flag1 --flag2"`
- `-DFLAGS="--flag1;--flag2"`
or when passing flags which themselves contains spaces, like:
- `-DFLAGS="--flag1 \"val1 val2\""`
- `-DFLAGS="--flag1;val1 val2"`
Note that the extra escaped qouting is no longer needed for proper CMake
lists as the `;` itself informs the system that spaces are to be kept as
spaces.
Signed-off-by: Torsten Rasmussen <Torsten.Rasmussen@nordicsemi.no>
Enhance sysbuild controlled configurations.
The current scheme of passing settings using `-D` on the CMake
invocation is vulnerable to quoting and lists.
With `zephyr_get()` in place as a uniform way of handling user
controlled settings (CMake cache / environment / CMake local variable)
we have a mechanism in place for a cleaner handling of sysbuild
controlled settings.
This improves the robustness of variable passing and add the same cleans
up and simplifies the logic in sysbuild.
The Kconfig Zephyr CMake module has been updated accordingly so that
CONFIG settings are taken from the sysbuild shadow cache when sysbuild
is used as higher level build system.
Signed-off-by: Torsten Rasmussen <Torsten.Rasmussen@nordicsemi.no>
Fixes: #40389
This commit aligns the use of the following Zephyr build variables:
- CONF_FILE
- DTC_OVERLAY_FILE
- OVERLAY_CONFIG
- WEST_DIR
- ZEPHYR_BOARD_ALIASES
- ZEPHYR_EXTRA_MODULES
- ZEPHYR_MODULES
so that they can be set in same manner and with same order of
preference.
Signed-off-by: Torsten Rasmussen <Torsten.Rasmussen@nordicsemi.no>
A cache variable specified by the user as `-DVAR=value` will have the
type UNINITIALIZED in the CMake cache.
Later CMake re-runs will execute the line:
set(${variable} ${CACHED_${variable}} CACHE STRING
"Selected ${variable_text}" FORCE)
This will update the cache type from UNINITIALIZED to STRING and thus
may be picked up by other tools as a change.
To ensure the type is initialized to string, this is added:
set(${variable} ${${variable}} CACHE STRING "Selected ${variable_text}")
This code will not change the value of an existing CMake cache variable
because there is no FORCE, but what it will do is to update the cache
variable type to STRING.
As part of this, include the existing parent scope setting of variable
inside the `if(DEFINED ...)` as there is no reason to clear a variable
there is not having a value.
Signed-off-by: Torsten Rasmussen <Torsten.Rasmussen@nordicsemi.no>
Fixes: #40389
Update toolchain handling to use zephyr_get() to ensure consistent
handling of CMake cache variables, environment variable, and CMake
local variables.
Signed-off-by: Torsten Rasmussen <Torsten.Rasmussen@nordicsemi.no>
Fixes: #40389
This commit implements zephyr_get(<variable>).
The purpose of zephyr_get(<variable>) is to ensure a uniform way to
handle variables which can be defined as:
- CMake cache variable, for example `-D<var>=<value>`.
- Environment variable
- Locally in CMakeLists.txt file before `find_package(Zephyr)`
It furthermore ensures that if an environment setting hides a local
setting then a warning is printed.
using
zephyr_get(<var>)
removes the need for constructs like:
set_ifndef(<var> "$ENV{<var>}")
set(<var> ${<var>} CACHE PATH "")
if(NOT DEFINED <var>)
set(<var> $ENV{<var>})
endif()
if (NOT DEFINED ENV{<var>})
message(FATAL_ERROR <error>)
endif()
and also ensures identical preference order for variables used in Zephyr
1. cache
2. environment
3. local scope var
It also ensures the variables supported through environment can also be
set using `-D<var>=<value>`
Signed-off-by: Torsten Rasmussen <Torsten.Rasmussen@nordicsemi.no>
Place vector sections after ROM_START sections.
Also add init.ld script that will prevent overlapping .init sections
in telink_b91 SoC.
Fixes#49036.
Signed-off-by: Mateusz Sierszulski <msierszulski@antmicro.com>
Follow-up: #49672
Zephyr SDK and host tools detection was reworked in #49672.
That rework accidentally changed the lookup order from:
- Zephyr SDK
- Other host tools
- Generic (host) C compiler
into
- Other host tools
- Zephyr SDK
- Generic (host) C compiler
this causes host tools shipped with Zephyr SDK, such as openocd to not
be discovered unless in path.
Restore the original order so that Zephyr SDK is located first so that
host tools from the SDK can be found without having them in path.
Signed-off-by: Torsten Rasmussen <Torsten.Rasmussen@nordicsemi.no>
Move deprecated XCC_USE_CLANG setting to deprecated module.
Deprecated and move the use of CROSS_COMPILE to deprecated module as we
have had ZEPHYR_TOOLCHAIN_VARIANT==cross-compile for a long time.
Deprecated code is now loaded with a single line:
> find_package(Deprecated COMPONENTS XCC_USE_CLANG CROSS_COMPILE)
Signed-off-by: Torsten Rasmussen <Torsten.Rasmussen@nordicsemi.no>
The deprecated CMake module allows Zephyr to move deprecated code to a
centralized location from where it's both easy to get an overview of
deprecated code, and remove the code when it has been deprecated long
enough.
It further improve existing code, as the real CMake code now can be
changed from n-lines of deprecated code into a single line of the form:
find_package(Deprecated COMPONENTS <deprecated_name>)
Signed-off-by: Torsten Rasmussen <Torsten.Rasmussen@nordicsemi.no>
Follow-up: #41301
This commit is a rework and cleanup of the target toolchain handling in
Zephyr CMake build system.
Instead of directly loading code a CMake modules for target toolchain
lookup, the target toolchain now follows the CMake `find_package()`
pattern for finding the target toolchain.
This makes it more clear which modules are responsible for finding tools
and which modules provides build integration / features.
The following tools can now be found using `find_package()`:
- Target toolchain: find_package(TargetTools)
Signed-off-by: Torsten Rasmussen <Torsten.Rasmussen@nordicsemi.no>
Follow-up: #41301
This commit is a rework and cleanup of the tools handling in Zephyr
CMake build system.
Instead of directly loading code a CMake modules for tool lookup, the
host tools now follows the CMake `find_package()` pattern for finding
programs / tools in module mode.
This makes it more clear which modules are responsible for finding tools
and which modules provides build integration / features.
The following tools can now be found using `find_package()`:
- Zephyr-sdk : find_package(Zephyr-sdk <version>)
- Generic host tools: find_package(HostTools)
This further allows us to decouple the `verify-toolchain` CMake script
part required by `twister` into a tool lookup module and a dedicated
CMake script which utilizes the lookup module.
Signed-off-by: Torsten Rasmussen <Torsten.Rasmussen@nordicsemi.no>
Removing Zephyr-SDK code for searching and printing messages when Zephyr
SDK is not found in the system.
After Zephyr SDK has been made available on all platforms, including
MacOS and Windows, then `find_package(Zephyr-sdk)` is always invoked
and thus either `find_package(Zephyr-sdk)` will fail or
ZEPHYR_TOOLCHAIN_VARIANT will be defined.
Meaning the removed code block in this commit can no longer be reached.
Signed-off-by: Torsten Rasmussen <Torsten.Rasmussen@nordicsemi.no>
Cleanup CMake code by moving devicetree compiler detection to dedicated
FindDtc.cmake module.
This allows us to re-use existing CMake find_package() functionality in
module mode and thus reduce CMake logic.
It further has the benefit of being able to directly specify dtc version
like this:
> find_package(Dtc 1.4.6)
Signed-off-by: Torsten Rasmussen <Torsten.Rasmussen@nordicsemi.no>
This moves the test of compile flags set in environment from generic
toolchain to top-level ${ZEPHYR_BASE}/CMakeLists.txt.
In order to cleanup and make Zephyr CMake modules more generic then
the testing of specific compile flags and warn user is not really a
toolchain module responsible but a implementation detail of the project
itself as to how compile flags should be applied in a project.
Signed-off-by: Torsten Rasmussen <Torsten.Rasmussen@nordicsemi.no>
This commit sets the minimum required Zephyr SDK version to 0.15, which
is required to build the current Zephyr codebase due to the following
breaking changes:
* RISC-V ISA spec change to 20191213 requiring the Zicsr and Zifencei
extensions to be specified to the `-march` flag
* ARC64 output format name change to `elf64-littlearc64`
Signed-off-by: Stephanos Ioannidis <root@stephanos.io>
The commit 8259931fce ("xcc-clang: Do not used unavailable options")
has a side-effect that builds with xcc default to use -fno-pie. This
is not a supported compiler option for xcc, resulting in failing builds.
Use same configuration for xcc as is in place for xcc-clang, and
do not use -fno-pie.
Signed-off-by: Kai Vehmanen <kai.vehmanen@linux.intel.com>
This PR allows the user to add symbols to the nocache
section. The use for this could be as follows
zephyr_linker_sources_ifdef(CONFIG_NOCACHE_MEMORY
NOCACHE_SECTION
nocache.ld
)
nocache.ld (as shown below) can define additional
symbols to go into the nocache section
. = ALIGN(4);
KEEP(*(NonCacheable))
Signed-off-by: Mahesh Mahadevan <mahesh.mahadevan@nxp.com>
Fixes: #48950
Kconfig requires quoted strings in its configuration files, like this:
> CONFIG_A_STRING="foo bar"
But CMake requires expects that strings are without additional qoutes,
and therefore qoutes are stripped when loading Kconfig config filers
into CMake.
This is particular important when the string in Kconfig is a path to a
file. In this case, not stripping the quotes leads to an error as the
file cannot be found.
When users pass a string to Kconfig through CMake, they are expected to
pass it so that qoutes are correct seen from Kconfig, that is:
> cmake -DCONFIG_A_STRING=\"foo bar\"
In CMake, those qoutes are written as-is to Kconfig extra config file,
and then removed in the CMake cache.
After Kconfig processing, the Kconfig settings are read back to CMake
but without quotes. Settings that was passed through the CMake cache,
for example using `-D` are written back to the cache, but this time
without the qoutes. This results in Kconfig errors on sub-sequent CMake
runs.
Instead of writing the Kconfig value setting back to the CMake cache,
introduce an internal shadow symbol in the cache prefixed with `CLI_`.
This allows the CMake cache to keep the value correctly formatted for
Kconfig extra config creation, while at the same time keep existing
behavior for CONFIG_ symbols read from Kconfig.
Signed-off-by: Torsten Rasmussen <Torsten.Rasmussen@nordicsemi.no>
Given that 3.6 is now several years old and the current and previous
Ubuntu LTS ship with 3.8 or later, upgrade the minimum required Python
version from 3.6 to 3.8.
Signed-off-by: Carles Cufi <carles.cufi@nordicsemi.no>
This implements support for relocating code to chosen memory regions via
the `zephyr_code_relocate` CMake function for RISC-V SoCs. ARM-specific
assumptions that were made by gen_relocate_app.py need to be corrected,
in particular not assuming any particular name for the default RAM
section (which is 'SRAM' for most ARM pltaforms) and not assuming 32-bit
pointers (so the test works on RV64).
Signed-off-by: Peter Marheine <pmarheine@chromium.org>
xcc-clang in based on clan-10 and does not support -fno-pic and
-fno-pie.
clang-10: warning: argument unused during compilation: '-fno-pic'
[-Wunused-command-line-argument]
[147/148] Linking C executable zephyr/zephyr.elf
clang-10: warning: argument unused during compilation: '-no-pie'
[-Wunused-command-line-argument]
Signed-off-by: Flavio Ceolin <flavio.ceolin@intel.com>
This had bitrotten a bit, and didn't build as shipped. Current
libasan implementations want -fsanitize=address passed as a linker
argument too. We have grown a "lld" linker variant that needs the
same cmake treatment as the "ld" binutils one, but never got it. But
the various flags had been cut/pasted around to different places, with
slightly different forms. That's really sort of a mess, as sanitizer
support was only ever support with host toolchains for native_posix
(and AFAICT no one anywhere has made this work on cross compilers in
an embedded environment). And the separate "gcc" vs. "llvm" layers
were silly, as there has only ever been one API for this feature (from
LLVM, then picked up compatibly by gcc).
Pull this stuff out and just do it in one place in the posix arch for
simplicity.
Also recent sanitizers are trying to add instrumentation padding
around data that we use linker trickery to pack tightly
(c.f. SYS_INIT, STRUCT_SECTION_ITERABLE) and we need a way
("__noasan") to turn that off. Actually for gcc, it was enough to
just make the records const (already true for most of them, except a
native_posix init struct), but clang apparently isn't smart enough.
Finally, add an ASAN_RECOVER kconfig that enables the use of
"halt_on_error=0" in $ASAN_OPTIONS, which continues execution past the
first error.
Signed-off-by: Andy Ross <andyross@google.com>
On Debian, llvm-obj{copy,dump} tools are installed with a version
suffix. Look first for a version that matches our compiler when
probing for tool paths before trying the bare version, or falling back
to GNU binutils.
Signed-off-by: Andy Ross <andyross@google.com>
