For Arm Cortex-family processors that only support single
sercurity state, (GICD_CTRL.ARE is set to '1'), so need to
set SPI's affinity for the PE which it is enabled.
Signed-off-by: Dat Nguyen Duy <dat.nguyenduy@nxp.com>
New API for suspend and resume LwM2M engine.
New event LWM2M_RD_CLIENT_EVENT_ENGINE_SUSPENDED for indicate
application that engine is suspended.
Simplify stack suspend and resume state same time for queue mode.
New CONFIG_LWM2M_RD_CLIENT_SUSPEND_SOCKET_AT_IDLE for enable skip socket
close at RX_OFF_IDDLE state that socket is only suspended and close is
called only when connection is resumed.
Signed-off-by: Juha Heiskanen <juha.heiskanen@nordicsemi.no>
Use Devicetree to describe the UART UPIPE IEEE 802.15.4 driver. This
allows to remove usage of IEEE802154_UPIPE_DRV_NAME in preparation for
the removal of NET_CONFIG_IEEE802154_DEV_NAME.
Signed-off-by: Gerard Marull-Paretas <gerard.marull@nordicsemi.no>
Use Devicetree to describe the radio and IEEE 802.15.4. This allows to
remove usage of IEEE802154_NRF5_DRV_NAME in preparation for the
removal of NET_CONFIG_IEEE802154_DEV_NAME.
All SoC files have been updated with the addition of an ieee802154 node
(disabled and only on those SoCs that define ieee802154-supported. The
peripheral has been enabled in the nRF52840DK board (used for testing
ieee802154).
Signed-off-by: Gerard Marull-Paretas <gerard.marull@nordicsemi.no>
Use Devicetree to describe the radio and IEEE 802.15.4. This allows to
remove usage of IEEE802154_KW41Z_DRV_NAME in preparation for the removal
of NET_CONFIG_IEEE802154_DEV_NAME.
KW41Z files have been updated with the addition of radio and an
ieee802154 nodes The peripheral has been enabled in the frdm_k41z board
(used for testing ieee802154).
Signed-off-by: Gerard Marull-Paretas <gerard.marull@nordicsemi.no>
The crypto driver is used internally, so there's no real need to expose
its name as a Kconfig option. Just drop it in favor of a plain string
with the same previous value.
Signed-off-by: Gerard Marull-Paretas <gerard.marull@nordicsemi.no>
Use Devicetree to describe the radio and IEEE 802.15.4. This allows to
remove usage of IEEE802154_CC13XX_CC26XX_SUBG_DRV_NAME in preparation
for the removal of NET_CONFIG_IEEE802154_DEV_NAME.
Signed-off-by: Gerard Marull-Paretas <gerard.marull@nordicsemi.no>
Use Devicetree to describe the radio and IEEE 802.15.4. This allows to
remove usage of IEEE802154_CC13XX_CC26XX_DRV_NAME in preparation for the
removal of NET_CONFIG_IEEE802154_DEV_NAME. All boards used in testing
have been updated to enable the peripheral in DT as well.
Signed-off-by: Gerard Marull-Paretas <gerard.marull@nordicsemi.no>
Use Devicetree to describe the radio and IEEE 802.15.4. This allows to
remove usage of IEEE802154_CC1200_DRV_NAME in preparation for the removal
of NET_CONFIG_IEEE802154_DEV_NAME.
In this case, the driver already had bindings, however, it was still
using NET_DEVICE_INIT.
Signed-off-by: Gerard Marull-Paretas <gerard.marull@nordicsemi.no>
Fixes an issue in sys_clock_tick_get() that could lead to drift in
a k_timer handler. The handler is invoked in the timer ISR as a
callback in sys_tick_announce().
1. The handler invokes k_uptime_ticks().
2. k_uptime_ticks() invokes sys_clock_tick_get().
3. sys_clock_tick_get() must call elapsed() and not
sys_clock_elapsed() as we do not want to count any
unannounced ticks that may have elapsed while
processing the timer ISR.
Fixes#46378
Signed-off-by: Peter Mitsis <peter.mitsis@intel.com>
Some processors support Dual-redundant Core Lock-step
DCLS) topology but the processor still can be ran in
split-lock mode (by default or changed at flash time).
So, introduce config DCLS that is enabled by default if
config CPU_HAS_DCLS is set, it should be disabled if
processor is used in split-lock mode.
Signed-off-by: Dat Nguyen Duy <dat.nguyenduy@nxp.com>
Now that watchdog drivers are enabled based on devicetree
we need to remove any cases of them getting enabled by
Kconfig.defconfig* files as this can lead to errors.
Typically the Kconfig.defconfig* will blindly enable a
watchdog and not respect the devicetree state of the watchdog.
Additionally we can get problems with prj.conf/defconfig
getting incorrectly overridden.
Signed-off-by: Kumar Gala <galak@kernel.org>
Updates sys_clock_announce() such that the <announce_remaining> update
calculation is done after the callback. This prevents another core from
entering the timeout processing loop before the first core leaves it.
Signed-off-by: Peter Mitsis <peter.mitsis@intel.com>
A test case may invoke run_all multiple times, causing
logic for listing tests to run tests on second call.
Signed-off-by: Al Semjonovs <asemjonovs@google.com>
There is a breaking change in Junitparser 'TestCase.result' between
v1.x and v2.x.
Update check_compliance.py minimally to take into account this change.
This avoids relying on an outdated package.
Signed-off-by: Henri Xavier <datacomos@huawei.com>
Sample compatibility should be determined by the sample.yaml in each
sample directory. Keeping a list in board documentation isn't a good
idea: easy to get outdated, it doesn't cover all compatible samples,
etc.
Signed-off-by: Gerard Marull-Paretas <gerard.marull@nordicsemi.no>
Now that DAC drivers are enabled based on devicetree
we need to remove any cases of them getting enabled by
Kconfig.defconfig* files as this can lead to errors.
Typically the Kconfig.defconfig* will blindly enable a
sensor and not respect the devicetree state of the DAC.
Additionally we can get problems with prj.conf/defconfig
getting incorrectly overridden.
Signed-off-by: Kumar Gala <galak@kernel.org>
The specific drivers for DAC_MCP4725 and DAC_DACX0508 have their
own driver specific Kconfig symbol for the INIT_PRIORITY. So
remove setting the generic one as it doesnt make sense to set it
and the default value matches what the board specific values for
INIT_PRIORITY are set to.
Signed-off-by: Kumar Gala <galak@kernel.org>
LV_Z_DISPLAY_DEV_NAME, LV_Z_HOR_RES_MAX, & LV_Z_VER_RES_MAX
Kconfig symbols don't exist anymore. They got removed in
recent devicetree update of lvgl module. So remove them from
modules/Kconfig.lvgl.
Signed-off-by: Kumar Gala <galak@kernel.org>
Current thread_competition() case cannot verify the order of mutex
taking. This commit enhances on that.
Signed-off-by: Ming Shao <ming.shao@intel.com>
As of now, both the old and new ztest framework don't have a logic to
launch static threads. Static threads can only be launched by Zephyr
itself during boot. If a test interact with static threads, when it
is executed multiple times without reboot, only the first few runs can
have static threads to interact with. After the static threads exit,
later runs will have nothing to interact with, which can lead to failure.
One unfortunate example is the sys_mutex test.
This commit replaces static threads with dynamic thread to make the test
repeatable. In future, maybe static threads launching logic should be
covered by the ztest framework so richer scenarios can be tested.
Signed-off-by: Ming Shao <ming.shao@intel.com>
Scanner was disabled after Friend Clear command. LNP didn't have
chance to receive Friend Clear Confirmation command back.
If option BT_MESH_LPN_ESTABLISHMENT is off then scanner is left
disabled and next Friend Offer after Friend Request
cannot be received.
PR fixes this.
Signed-off-by: Aleksandr Khromykh <aleksandr.khromykh@nordicsemi.no>
According to the reference manual, the ADC should not be
converting when setting the common path, we disable the adc
directly in this driver for the sake of simplicity.
Signed-off-by: Yong Cong Sin <yongcong.sin@gmail.com>
Remove unnecessary VREFINT path connection during the init.
Internal paths should be setup before reading the channel.
Signed-off-by: Yong Cong Sin <yongcong.sin@gmail.com>
Move the `adc_stm32_setup_channels` function to `start_read`
so that we can guarantee that the internel path is connecte
before reading.
Signed-off-by: Yong Cong Sin <yongcong.sin@gmail.com>
