Add assert when negative (except K_FOREVER) is passed as timeout.
Add negative timeout correction to 0.
Signed-off-by: Krzysztof Chruscinski <krzysztof.chruscinski@nordicsemi.no>
Previously, passing K_FOREVER to k_sleep() would return
immediately.
Forever is a long time. Even if woken up at some point,
we still had forever to sleep, so return K_FOREVER in this
case.
Signed-off-by: Andrew Boie <andrew.p.boie@intel.com>
Entering irq_offload() on multiple CPUs can cause
difficult to debug/reproduce crashes. Demote irq_offload()
to non-inline (it never needed to be inline anyway) and
wrap the arch call in a semaphore.
Some tests which were unnecessarily killing threads
have been fixed; these threads exit by themselves anyway
and we won't leave the semaphore dangling.
The definition of z_arch_irq_offload() moved to
arch_interface.h as it only gets called by kernel C code.
Signed-off-by: Andrew Boie <andrew.p.boie@intel.com>
Mark the old time conversion APIs deprecated, leave compatibility
macros in place, and replace all usage with the new API.
Signed-off-by: Andy Ross <andrew.j.ross@intel.com>
Promote the private z_arch_* namespace, which specifies
the interface between the core kernel and the
architecture code, to a new top-level namespace named
arch_*.
This allows our documentation generation to create
online documentation for this set of interfaces,
and this set of interfaces is worth treating in a
more formal way anyway.
Signed-off-by: Andrew Boie <andrew.p.boie@intel.com>
need to release spinlock first before busy_wait,
or other cores cannot get the spinlock when the holder is
busy waitting.
Signed-off-by: Wayne Ren <wei.ren@synopsys.com>
This commit modifies the z_new_thread_init function, that was
previously declared as ALWAYS_INLINE to be a normal function.
z_new_thread_init function is only called by the z_arch_new_thread
function and, since this is not a performance-critical function, there
is no good justification for inlining it.
Signed-off-by: Stephanos Ioannidis <root@stephanos.io>
This commit refactors kernel and arch headers to establish a boundary
between private and public interface headers.
The refactoring strategy used in this commit is detailed in the issue
This commit introduces the following major changes:
1. Establish a clear boundary between private and public headers by
removing "kernel/include" and "arch/*/include" from the global
include paths. Ideally, only kernel/ and arch/*/ source files should
reference the headers in these directories. If these headers must be
used by a component, these include paths shall be manually added to
the CMakeLists.txt file of the component. This is intended to
discourage applications from including private kernel and arch
headers either knowingly and unknowingly.
- kernel/include/ (PRIVATE)
This directory contains the private headers that provide private
kernel definitions which should not be visible outside the kernel
and arch source code. All public kernel definitions must be added
to an appropriate header located under include/.
- arch/*/include/ (PRIVATE)
This directory contains the private headers that provide private
architecture-specific definitions which should not be visible
outside the arch and kernel source code. All public architecture-
specific definitions must be added to an appropriate header located
under include/arch/*/.
- include/ AND include/sys/ (PUBLIC)
This directory contains the public headers that provide public
kernel definitions which can be referenced by both kernel and
application code.
- include/arch/*/ (PUBLIC)
This directory contains the public headers that provide public
architecture-specific definitions which can be referenced by both
kernel and application code.
2. Split arch_interface.h into "kernel-to-arch interface" and "public
arch interface" divisions.
- kernel/include/kernel_arch_interface.h
* provides private "kernel-to-arch interface" definition.
* includes arch/*/include/kernel_arch_func.h to ensure that the
interface function implementations are always available.
* includes sys/arch_interface.h so that public arch interface
definitions are automatically included when including this file.
- arch/*/include/kernel_arch_func.h
* provides architecture-specific "kernel-to-arch interface"
implementation.
* only the functions that will be used in kernel and arch source
files are defined here.
- include/sys/arch_interface.h
* provides "public arch interface" definition.
* includes include/arch/arch_inlines.h to ensure that the
architecture-specific public inline interface function
implementations are always available.
- include/arch/arch_inlines.h
* includes architecture-specific arch_inlines.h in
include/arch/*/arch_inline.h.
- include/arch/*/arch_inline.h
* provides architecture-specific "public arch interface" inline
function implementation.
* supersedes include/sys/arch_inline.h.
3. Refactor kernel and the existing architecture implementations.
- Remove circular dependency of kernel and arch headers. The
following general rules should be observed:
* Never include any private headers from public headers
* Never include kernel_internal.h in kernel_arch_data.h
* Always include kernel_arch_data.h from kernel_arch_func.h
* Never include kernel.h from kernel_struct.h either directly or
indirectly. Only add the kernel structures that must be referenced
from public arch headers in this file.
- Relocate syscall_handler.h to include/ so it can be used in the
public code. This is necessary because many user-mode public codes
reference the functions defined in this header.
- Relocate kernel_arch_thread.h to include/arch/*/thread.h. This is
necessary to provide architecture-specific thread definition for
'struct k_thread' in kernel.h.
- Remove any private header dependencies from public headers using
the following methods:
* If dependency is not required, simply omit
* If dependency is required,
- Relocate a portion of the required dependencies from the
private header to an appropriate public header OR
- Relocate the required private header to make it public.
This commit supersedes #20047, addresses #19666, and fixes#3056.
Signed-off-by: Stephanos Ioannidis <root@stephanos.io>
We need to pass system call args using a register-width
data type and not hard-code this to u32_t.
Signed-off-by: Andrew Boie <andrew.p.boie@intel.com>
Use this short header style in all Kconfig files:
# <description>
# <copyright>
# <license>
...
Also change all <description>s from
# Kconfig[.extension] - Foo-related options
to just
# Foo-related options
It's clear enough that it's about Kconfig.
The <description> cleanup was done with this command, along with some
manual cleanup (big letter at the start, etc.)
git ls-files '*Kconfig*' | \
xargs sed -i -E '1 s/#\s*Kconfig[\w.-]*\s*-\s*/# /'
Signed-off-by: Ulf Magnusson <Ulf.Magnusson@nordicsemi.no>
Clean up space errors and use a consistent style throughout the Kconfig
files. This makes reading the Kconfig files more distraction-free, helps
with grepping, and encourages the same style getting copied around
everywhere (meaning another pass hopefully won't be needed).
Go for the most common style:
- Indent properties with a single tab, including for choices.
Properties on choices work exactly the same syntactically as
properties on symbols, so not sure how the no-indentation thing
happened.
- Indent help texts with a tab followed by two spaces
- Put a space between 'config' and the symbol name, not a tab. This
also helps when grepping for definitions.
- Do '# A comment' instead of '#A comment'
I tweaked Kconfiglib a bit to find most of the stuff.
Some help texts were reflowed to 79 columns with 'gq' in Vim as well,
though not all, because I was afraid I'd accidentally mess up
formatting.
Signed-off-by: Ulf Magnusson <Ulf.Magnusson@nordicsemi.no>
In z_fatal_error() we invoke the arch-specific API that
evaluates whether we are in a nested exception. We then
use the result to log a message that the error occurred
in ISR. In non-test mode, we unconditionally panic, if
an exception has occurred in an ISR and the fatal error
handler has not returned (apart from the case of an
error in stack sentinel check).
Signed-off-by: Ioannis Glaropoulos <Ioannis.Glaropoulos@nordicsemi.no>
Duplicate definitions elsewhere have been removed.
A couple functions which are defined by the arch interface
to be non-inline, but were implemented inline by native_posix
and intel64, have been moved to non-inline.
Some missing conditional compilation for z_arch_irq_offload()
has been fixed, as this is an optional feature.
Some massaging of native_posix headers to get everything
in the right scope.
Signed-off-by: Andrew Boie <andrew.p.boie@intel.com>
The intel64 switch implementation doesn't actually use a switch handle
per se, just the raw thread struct pointers which get stored into the
handle field. This works fine for normally initialized threads, but
when switching out of a dummy thread at initialization, nothing has
initialized that field and the code was dumping registers into the
bottom of memory through the resulting NULL pointer.
Fix this by skipping the load of the field value and just using an
offset instead to get the struct address, which is actually slightly
faster anyway (a SUB immediate instruction vs. the load).
Actually for extra credit we could even move the switch_handle field
to the top of the thread struct and eliminate the instruction
entirely, though if we did that it's probably worth adding some
conditional code to make the switch_handle field disappear entirely.
Signed-off-by: Andy Ross <andrew.j.ross@intel.com>
include/sys/arch_inlines.h will contain all architecture APIs
that are used by public inline functions and macros,
with implementations deriving from include/arch/cpu.h.
kernel/include/arch_interface.h will contain everything
else, with implementations deriving from
arch/*/include/kernel_arch_func.h.
Instances of duplicate documentation for these APIs have been
removed; implementation details have been left in place.
Signed-off-by: Andrew Boie <andrew.p.boie@intel.com>
Re-run with updated script to convert integer literal delay arguments
to k_thread_create and K_THREAD_DEFINE to use the standard timeout
macros.
Signed-off-by: Peter Bigot <peter.bigot@nordicsemi.no>
This maximum is implicit in the kernel support for SMP, e.g.,
kernel/init.c and kernel/smp.c assume CONFIG_MP_NUM_CPUS <= 4.
Signed-off-by: Charles E. Youse <charles.youse@intel.com>
A loop in k_mem_pool_alloc() around z_sys_mem_pool_block_alloc() assumes
the later may return -EAGAIN with an elaborate comment about it. But
-EAGAIN is no longer returned by that function since commit 7845e1b01e
("lib/mempool: Fix spurious -ENOMEM due to agressive latency control").
Signed-off-by: Nicolas Pitre <npitre@baylibre.com>
This commit adds new k_work_poll interface. It allows to
submit given work to a workqueue automatically when one of the
watched pollable objects changes its state.
Signed-off-by: Piotr Zięcik <piotr.ziecik@nordicsemi.no>
Signed-off-by: Peter A. Bigot <pab@pabigot.com>
This commit separates k_poll() infrastructure from k_poll() API
implementation, allowing other (future) API calls to use the same
framework.
Signed-off-by: Piotr Zięcik <piotr.ziecik@nordicsemi.no>
Remove FUNC_NORETURN attribute from _StackCheckHandler to address the
following warning from gcc-9.2:
kernel/compiler_stack_protect.c:62:32: error: '__stack_chk_fail'
specifies less restrictive attribute than its target
'_StackCheckHandler': 'noreturn' [-Werror=missing-attributes]
Signed-off-by: Kumar Gala <kumar.gala@linaro.org>
We now define z_is_idle_thread_object() in ksched.h,
and the repeated definitions of a function that does
the same thing now changed to just use the common
definition.
Signed-off-by: Andrew Boie <andrew.p.boie@intel.com>
This takes an entry point and not a thread as argument.
Rename to z_is_idle_thread_entry() to make this clearer.
Signed-off-by: Andrew Boie <andrew.p.boie@intel.com>
The main and idle threads, and their associated stacks,
were being referenced in various parts of the kernel
with no central definition. Expose these in kernel_internal.h
and namespace with z_ appropriately.
The main and idle threads were being defined statically,
with another variable exposed to contain their pointer
value. This wastes a bit of memory and isn't accessible
to user threads anyway, just expose the actual thread
objects.
Redundance MAIN_STACK_SIZE and IDLE_STACK_SIZE defines
in init.c removed, just use the Kconfigs they derive
from.
Signed-off-by: Andrew Boie <andrew.p.boie@intel.com>
These are renamed to z_timestamp_main and z_timestamp_idle,
and now specified in kernel_internal.h.
Signed-off-by: Andrew Boie <andrew.p.boie@intel.com>
This is part of the core kernel -> architecture interface and
has been renamed z_arch_kernel_init().
Signed-off-by: Andrew Boie <andrew.p.boie@intel.com>
z_set_thread_return_value is part of the core kernel -> arch
interface and has been renamed to z_arch_thread_return_value_set.
z_set_thread_return_value_with_data renamed to
z_thread_return_value_set_with_data for consistency.
Signed-off-by: Andrew Boie <andrew.p.boie@intel.com>
This is part of the core kernel -> architecture interface
and is appropriately renamed z_arch_is_in_isr().
References from test cases changed to k_is_in_isr().
Signed-off-by: Andrew Boie <andrew.p.boie@intel.com>
This is part of the core kernel -> architecture interface
and should have a leading prefix z_arch_.
Signed-off-by: Andrew Boie <andrew.p.boie@intel.com>
Global variables related to timing information have been
renamed to be prefixed with z_arch, with naming arranged
in increasing order of specificity.
Signed-off-by: Andrew Boie <andrew.p.boie@intel.com>
An #endif and the brace terminating a compound statement were
transposed, causing compilation errors with the above-specified
combination of configuration options.
Signed-off-by: Charles E. Youse <charles.youse@intel.com>
The callback function has been ignored in z_timeout_init() since the
timer rework in fall 2018. Passing real handlers to it in code is
distracting when they will be overridden by whatever callback is
provided in z_add_timeout().
As this function is an internal API deprecation is not necessary.
Remove the parameter and change all call sites to drop the argument.
Signed-off-by: Peter A. Bigot <pab@pabigot.com>
Corrected the define of SMP_FALLBACK to prevent llvm warning.
llvm issues a warning as the behaviour of using defined(x) inside a
macro expansion is undefined (https://reviews.llvm.org/D15866).
Signed-off-by: Jan Van Winkel <jan.van_winkel@dxplore.eu>
If an architecture declares support for IPI, we still want to use it
only when running in SMP mode.
(This also fixes a build failure on ARC, which declares
CONFIG_SCHED_IPI_SUPPORTED but doesn't actually implement
z_arch_sched_ipi() yet).
Signed-off-by: Andy Ross <andrew.j.ross@intel.com>
The timeout code has an optimization where it refuses to send a new
timeout to the driver unless it is sooner than one already scheduled.
This won't work on SMP, though, because the timeout value when
timeslicing is enabled depends on the current thread, and on SMP the
decision as to the next thread will not be made until later (when we
swap, or exit an interrupt).
Signed-off-by: Andy Ross <andrew.j.ross@intel.com>
Now that we have a working IPI framework, there's no reason for the
default spin loop for the SMP idle thread. Just use the default
platform idle and send an IPI when a new thread is readied.
Long term, this can be optimized if necessary (e.g. only send the IPI
to idling CPUs, or check priorities, etc...), but for a 2-cpu system
this is a very reasonable default.
Signed-off-by: Andy Ross <andrew.j.ross@intel.com>
Our thread struct gets initialized piecewise in a bunch of locations
(this is sort of a design flaw). The is_idle field, which was
introduced to identify idle threads in SMP (where there can be more
than one), was correctly set for idle threads but was being left
uninitialized elsewhere, and in a tiny handful of cases was turning up
nonzero.
The case in pipes. was particularly vexsome, as that isn't a thread at
all but one of the "dummy" threads used for timeouts (another design
flaw IMHO).
Get this right everywhere.
Signed-off-by: Andy Ross <andrew.j.ross@intel.com>
In uniprocessor mode, the kernel knows when a context switch "is
coming" because of the cache optimization and can use that to do
things like update time slice state. But on SMP the scheduler state
may be updated on the other CPU at any time, so we don't know that a
switch is going to happen until the last minute.
Expose reset_time_slice() as a public function and call it when needed
out of z_swap().
Signed-off-by: Andy Ross <andrew.j.ross@intel.com>
The loop in thread abort on SMP where we wait for the results on an
IPI correctly handled the case where a thread running on another CPU
gets its interrupt and self-aborts, but it missed the case where the
other thread pends before receiving the interrupt.
Signed-off-by: Andy Ross <andrew.j.ross@intel.com>
