Added counter in supported hardware features.
It forgot in the commit when introducing the counter driver.
Signed-off-by: TOKITA Hiroshi <tokita.hiroshi@gmail.com>
Added counter in supported hardware features.
It forgot in the commit when introducing the counter driver.
Signed-off-by: TOKITA Hiroshi <tokita.hiroshi@gmail.com>
Added counter in supported hardware features.
It forgot in the commit when introducing the counter driver.
Signed-off-by: TOKITA Hiroshi <tokita.hiroshi@gmail.com>
Kconfig options with a HEAP_MEM_POOL_ADD_SIZE_ prefix should be used to
set the minimum required system heap size. This helps prevent
applications from creating a non-working image by trying to set a too
small value.
Signed-off-by: Johan Hedberg <johan.hedberg@intel.com>
Kconfig options with a HEAP_MEM_POOL_ADD_SIZE_ prefix should be used to
set the minimum required system heap size. This helps prevent
applications from creating a non-working image by trying to set a too
small value.
Signed-off-by: Johan Hedberg <johan.hedberg@intel.com>
Kconfig options with a HEAP_MEM_POOL_ADD_SIZE_ prefix should be used to
set the minimum required system heap size. This helps prevent
applications from creating a non-working image by trying to set a too
small value.
Signed-off-by: Johan Hedberg <johan.hedberg@intel.com>
Kconfig options with a HEAP_MEM_POOL_ADD_SIZE_ prefix should be used to
set the minimum required system heap size. This helps prevent
applications from creating a non-working image by trying to set a too
small value.
Signed-off-by: Johan Hedberg <johan.hedberg@intel.com>
Kconfig options with a HEAP_MEM_POOL_ADD_SIZE_ prefix should be used to
set the minimum required system heap size. This helps prevent
applications from creating a non-working image by trying to set a too
small value.
Signed-off-by: Johan Hedberg <johan.hedberg@intel.com>
All x86 boards have so far set a custom heap memory pool size because of
their dependency on ACPI. It makes more sense to introduce a new
ACPI-specific option, utilizing the recently added
HEAP_MEM_POOL_ADD_SIZE_ Kconfig option prefix, and adjust the default
value as necessary for each board.
Signed-off-by: Johan Hedberg <johan.hedberg@intel.com>
This PR corrects the RAM size specification of
the Infineon CY8CPROTO-062-4343W PSoC6 eval board.
Fixes#60876
Signed-off-by: Manuel Loew <manuel.loew.infineon@gmail.com>
To be compatible with BLE operation and BLE Controler configuration,
update board clock configuration to work using a fixed core clock at
16MHz.
Signed-off-by: Erwan Gouriou <erwan.gouriou@st.com>
The BT HCI uses internal IOM4 (SPI4) for communication bus.
Set the default configuration for BT based on the controller supported
capability and HCI driver dependency.
Signed-off-by: Aaron Ye <aye@ambiq.com>
Add a device driver to read events from a Linux evdev device node and
inject them back as Zephyr input events.
Signed-off-by: Fabio Baltieri <fabiobaltieri@google.com>
* Add a subsection linking to the emulators section.
* Added more internal links
* Fixed EPROM simulator/emulator mix, and added link
to simulator
* For the RTC peripheral, mention there is no driver for
it yet.
Signed-off-by: Alberto Escolar Piedras <alberto.escolar.piedras@nordicsemi.no>
Add the possibility to flash stm32f429i_disc1 board using
STM32CubeProgrammer & patch the OpenOCD cfg.
Signed-off-by: Abderrahmane Jarmouni <abderrahmane.jarmouni-ext@st.com>
`west sign` has been invoked by `west build` (through CMake) since
commit fad2da39aa, almost one year ago. During that time, this new
workflow has been refined and successfully used by at least two vendors,
multiple CIs across both SOF and Zephyr and many developers.
At the time, the ability to sign from `west flash` was preserved for
backwards compatibility. This means rimage parameters can come from many
different places at once and that rimage can be invoked twice during a
single `west flash` invocation!
Now that Zephyr 3.5 has been released, we need to reduce the number of
rimage use cases and the corresponding validation complexity and
maintenance workload to simplify and accelerate new features like
splitting rimage configuration files (#65411)
Signed-off-by: Marc Herbert <marc.herbert@intel.com>
Generic Connector for the apollo4p_evb
Ran tests/drivers/gpio/gpio_basic_api
Ambiq does not support DUAL Edged Interrupts.
Added Connector Usages as defined by the Ambiq BSP.
Signed-off-by: Richard Wheatley <richard.wheatley@ambiq.com>
The target has board configuration for spi_flash sample but bacause
of the lack of SPI mentioned in supported peripherals Twister
is filtering out the target for sample.drivers.spi.flash test.
Signed-off-by: Adam Wojasinski <adam.wojasinski@nordicsemi.no>
Introduce support for ST Nucleo F722ZE, an evaluation board based on
the STM32F722ZET6U microcontroller.
Signed-off-by: Evan Perry Grove <evan@4grove.com>
CONFIG_SYS_CLOCK_HW_CYCLES_PER_SEC should be defined at the SoC
or the board level since Xtensa cores are high configurable.
The default is just for ISS (Instruction Set Simulator). So
remove it from the arch level.
The xt-sim board is the only one in tree that is targeting
the ISS, so add it there.
Signed-off-by: Daniel Leung <daniel.leung@intel.com>
The `az3166_iotdevkit` board doesn't have its RTC node enabled,
and is failing the following test:
`tests/benchmarks/footprints/benchmark.kernel.footprints.pm`
Enabled RTC node for that platform.
Signed-off-by: Francois Ramu <francois.ramu@st.com>
The `96b_aerocore2` board doesn't have its RTC node enabled,
and is failing the following test:
`tests/benchmarks/footprints/benchmark.kernel.footprints.pm`
Enabled RTC node and lsi clock source for that platform.
Signed-off-by: Francois Ramu <francois.ramu@st.com>
Without this, cache manipulation cannot work in x86.
clflush was introduced with SSE2 extension, but may be implemented
without this extension and it seems that qemu made this choice a
adding sse2 CPU capability does not include clflush. It enabled by
default in 64 bits, so let's take care of this capability only for
the 32bits version of the board.
Signed-off-by: Tomasz Bursztyka <tomasz.bursztyka@linux.intel.com>
Enforce that the initial attestation partition has the required
initial attestation key provisioned.
If the initial attestation key (IAK) is not present during boot of
TF-M the system will panic during initialization.
Signed-off-by: Joakim Andersson <joakim.andersson@nordicsemi.no>
Introduce Kconfig option in zephyr build system that reflects the TF-M
cmake config variable with the same default value for dummy provisioning
and have it satisfy the IAK present requirement.
This configuration is not suitable for production, and by having this
in zephyr configuration we can have this as part of the hardened
configuration check.
Signed-off-by: Joakim Andersson <joakim.andersson@nordicsemi.no>
Changed the tx/rx pins in pinctrl *.dtsi files to match the
evaluation board circuit diagram for UART1.
Signed-off-by: Steffen Jahnke <steffen.jahnke@eu.panasonic.com>
Rename the native Linux SocketCAN driver to reflect that it can can now be
used in both native_posix and native_sim (with or without an embedded
C-library).
Signed-off-by: Henrik Brix Andersen <hebad@vestas.com>
Change the name of the node for the lptim used as lowpower
tick source to stm32_lp_tick_source.
Once enabled, this node is known as stm32_lp_tick_source
That will avoid naming the node lptim1 or lptim2 or lptim, etc.
Signed-off-by: Francois Ramu <francois.ramu@st.com>
Remove BT_SPI_BLUENRG Kconfig parameter as it is redundant according to
the new changes introduced by ST SPI protocol V1 and V2.
Remove "config BT_SPI_BLUENRG" from the boards that were using it.
Signed-off-by: Ali Hozhabri <ali.hozhabri@st.com>
The PAN1783A evaluation board is a development tool for the nRF5340
from Nordic Semiconductor.
Signed-off-by: Steffen Jahnke <steffen.jahnke@eu.panasonic.com>
Fix intel_adsp_generic.rst following the merge of the rimage git
repository back into the sof git repository:
- https://github.com/thesofproject/sof/issues/7270
Signed-off-by: Marc Herbert <marc.herbert@intel.com>
The `mikroe_mini_m4_for_stm32` board doesn't have its RTC node
enabled, and is failing the following test:
`tests/benchmarks/footprints/benchmark.kernel.footprints.pm`
This board seems to have been missed out from 44b8370, let's
enable the rtc & clk_lsi here.
Signed-off-by: Yong Cong Sin <ycsin@meta.com>
