Most IEEE 802.15.4 drivers do not support promiscuous mode, some do.
There is a dedicated L2 flag to signal this capability to clients.
Unfortunately the IEEE 802.15.4 L2 stack does not announce this flag
even for drivers that correctly expose it in their HW capabilities.
Some clients (notably the OpenThread L2) even uses promiscuous mode
without checking whether the driver actually supports it.
This change lets the vanilla IEEE 802.15.4 L2 check the driver's
HW capabilities to announce promiscuous mode on its 'get_flags()'
interface if supported.
The OpenThread L2 uses a constant (potentially incorrect) response
to 'get_flags()'. Fixing the OpenThread L2 is out of scope of this
change. This change just introduces TODO messages to the OpenThread code
so that the OpenThread team may fix the issue (or delete the TODO if they
deem it irrelevant).
Fixes: #51263
Signed-off-by: Florian Grandel <jerico.dev@gmail.com>
Several IEEE 802154 drivers allocated RX packets from the TX pool.
This may seem like a minor problem at first sight but it may become
problematic if the pool is used to distinguish package types as is the
case in some code paths, e.g. for packet priority or determination of
the packet buffer pool.
This bug also has the potential of starving the TX pool capacity which
even may make devices vulnerable to DoS attacks as sending may be
prohibited by addressing enough RX packets to a device to let it run out
of TX capacity.
Fixes: #51261
Signed-off-by: Florian Grandel <jerico.dev@gmail.com>
Change automated searching for files using "IRQ_CONNECT()" API not
including <zephyr/irq.h>.
Signed-off-by: Gerard Marull-Paretas <gerard.marull@nordicsemi.no>
After b5f3cf8006 some platforms
(qemu_riscv32_xip) are not able to boot. Re-introduce the bit field for
init_res, using `unsigned int` (valids are signed/unsigned int, and
bool).
Signed-off-by: Gerard Marull-Paretas <gerard.marull@nordicsemi.no>
Make the sample exchange the data between cores
for predefined time. Clean up logging messages
and do not print transfer speed on each side.
This sample is now used to demonstrate functionalities
of ipc service with icmsg backend.
Signed-off-by: Emil Obalski <Emil.Obalski@nordicsemi.no>
Change linkage for ctx_shell and default_key in shell.c to external to
share their usage in other places.
Signed-off-by: Pavel Vasilyev <pavel.vasilyev@nordicsemi.no>
This commits renames `health_cli.c` and `cfg_cli.c` under `mesh/shell`
folder to `health.c` and `cfg.c` accordingly. This is to create a
generic pattern for the future, when not only clients, but server models
will also expose some API through shell commands. This means that server
models' shell commands should be located in the same file as client
commands to avoid cluttering `mesh models` subcommand.
Signed-off-by: Pavel Vasilyev <pavel.vasilyev@nordicsemi.no>
This code is a boulerplate that will be needed for many models in mesh
shell module. This commit adds a special macro designed to improve
readability of the code and helps to avoid potential bugs when
copy-pasting identical code.
Signed-off-by: Pavel Vasilyev <pavel.vasilyev@nordicsemi.no>
Not all shell commands may be needed for an end application even if a
certain feature is enabled. In that case they will just occupy flash
space without being used. This commit adds a separate Kconfig for each
feature to make possible to selectively disable some mesh shell commands.
Signed-off-by: Pavel Vasilyev <pavel.vasilyev@nordicsemi.no>
Move mesh shell related options to a new file to avoid cluttering of
the main Bluetooth Mesh Kconfig file when extending it with new options.
Signed-off-by: Pavel Vasilyev <pavel.vasilyev@nordicsemi.no>
Header lora.h and lorawan.c files make use of types defined
in kernel.h without including it.
The types.h is no more relevant with inclusion of kernel.h
Explicitely including <stdint.h>, even if the kernel.h includes
the stdint.h, this is an implementation detail. "If Kernel
decides one day to drop usage of stdint.h (unlikely),
lora.h users be in trouble."
Signed-off-by: Francois Ramu <francois.ramu@st.com>
Added test which validates that messages are processed in
expected order. Order depends on link configuration. If link
is using dedicated mpsc_pbuf then processing order is
based on timestamp. When single mpsc_pbuf is used then order
is derived from message arrival order.
Signed-off-by: Krzysztof Chruscinski <krzysztof.chruscinski@nordicsemi.no>
Add documentation for multidomain logging.
Signed-off-by: Krzysztof Chruscinski <krzysztof.chruscinski@nordicsemi.no>
Signed-off-by: Francesco Domenico Servidio <francesco.servidio@nordicsemi.no>
Added link that sends messages over ipc_service. It uses
log_link_remote and will talk to log_backend_ipc_service based
on log_link_backend.
Signed-off-by: Krzysztof Chruscinski <krzysztof.chruscinski@nordicsemi.no>
Added backend that sends messages over ipc_service. It uses
log_backend_remote and will talk to log_link_ipc_service based
on log_link_remote.
Signed-off-by: Krzysztof Chruscinski <krzysztof.chruscinski@nordicsemi.no>
Added implementation of link and backend that are intended to
complement each other. Both requires transport function hooks
to be provided.
Signed-off-by: Krzysztof Chruscinski <krzysztof.chruscinski@nordicsemi.no>
Add support to multidomain case where source field contains
ID and not address of the source structure.
Signed-off-by: Krzysztof Chruscinski <krzysztof.chruscinski@nordicsemi.no>
Adding multidomain support by introducing log_link module which
acts as a receiver of log messages created by another domain.
Signed-off-by: Krzysztof Chruscinski <krzysztof.chruscinski@nordicsemi.no>
log_cache is capable of storing fixed length byte arrays
identified by a generic ID. If entry identified by given ID
is not found in cache, the least recently used entry is evicted
from cache.
Signed-off-by: Krzysztof Chruscinski <krzysztof.chruscinski@nordicsemi.no>
Migrates all Winsen sensors to inherit base sensor device properties.
This will allow us to define properties shared by multiple sensors in
one place.
Signed-off-by: Maureen Helm <maureen.helm@intel.com>
Migrates all WE sensors to inherit base sensor device properties. This
will allow us to define properties shared by multiple sensors in one
place.
Signed-off-by: Maureen Helm <maureen.helm@intel.com>
Migrates all Vishay sensors to inherit base sensor device properties.
This will allow us to define properties shared by multiple sensors in
one place.
Signed-off-by: Maureen Helm <maureen.helm@intel.com>
Migrates all TI sensors to inherit base sensor device properties. This
will allow us to define properties shared by multiple sensors in one
place.
Signed-off-by: Maureen Helm <maureen.helm@intel.com>
Migrates all ST sensors to inherit base sensor device properties. This
will allow us to define properties shared by multiple sensors in one
place.
Signed-off-by: Maureen Helm <maureen.helm@intel.com>
Migrates all Silabs sensors to inherit base sensor device properties.
This will allow us to define properties shared by multiple sensors in
one place.
Signed-off-by: Maureen Helm <maureen.helm@intel.com>
Migrates all Sensirion sensors to inherit base sensor device properties.
This will allow us to define properties shared by multiple sensors in
one place.
Signed-off-by: Maureen Helm <maureen.helm@intel.com>
Migrates all Semtech sensors to inherit base sensor device properties.
This will allow us to define properties shared by multiple sensors in
one place.
Signed-off-by: Maureen Helm <maureen.helm@intel.com>
Migrates all Seeed sensors to inherit base sensor device properties.
This will allow us to define properties shared by multiple sensors in
one place.
Signed-off-by: Maureen Helm <maureen.helm@intel.com>
Migrates all SBS sensors to inherit base sensor device properties. This
will allow us to define properties shared by multiple sensors in one
place.
Signed-off-by: Maureen Helm <maureen.helm@intel.com>
Migrates all Plantower sensors to inherit base sensor device properties.
This will allow us to define properties shared by multiple sensors in
one place.
Signed-off-by: Maureen Helm <maureen.helm@intel.com>
Migrates all Panasonic sensors to inherit base sensor device properties.
This will allow us to define properties shared by multiple sensors in
one place.
Signed-off-by: Maureen Helm <maureen.helm@intel.com>
Migrates all NXP sensors to inherit base sensor device properties. This
will allow us to define properties shared by multiple sensors in one
place.
Signed-off-by: Maureen Helm <maureen.helm@intel.com>
Migrates all Nuvoton sensors to inherit base sensor device properties.
This will allow us to define properties shared by multiple sensors in
one place.
Signed-off-by: Maureen Helm <maureen.helm@intel.com>
Migrates all Nordic sensors to inherit base sensor device properties.
This will allow us to define properties shared by multiple sensors in
one place.
Signed-off-by: Maureen Helm <maureen.helm@intel.com>
Migrates all Microchip sensors to inherit base sensor device properties.
This will allow us to define properties shared by multiple sensors in
one place.
Signed-off-by: Maureen Helm <maureen.helm@intel.com>
Migrates all Measurement Specialties sensors to inherit base sensor
device properties. This will allow us to define properties shared by
multiple sensors in one place.
Signed-off-by: Maureen Helm <maureen.helm@intel.com>
Migrates all Maxim sensors to inherit base sensor device properties.
This will allow us to define properties shared by multiple sensors in
one place.
Signed-off-by: Maureen Helm <maureen.helm@intel.com>
Migrates all LM sensors to inherit base sensor device properties. This
will allow us to define properties shared by multiple sensors in one
place.
Signed-off-by: Maureen Helm <maureen.helm@intel.com>
Migrates all ITE sensors to inherit base sensor device properties. This
will allow us to define properties shared by multiple sensors in one
place.
Signed-off-by: Maureen Helm <maureen.helm@intel.com>
Migrates all Intersil sensors to inherit base sensor device properties.
This will allow us to define properties shared by multiple sensors in
one place.
Signed-off-by: Maureen Helm <maureen.helm@intel.com>
Migrates all Invensense sensors to inherit base sensor device
properties. This will allow us to define properties shared by multiple
sensors in one place.
Signed-off-by: Maureen Helm <maureen.helm@intel.com>
