ESP32 uart driver requires uart port number to its low level calls.
In case uart0 is disabled and uart1 is enabled, driver will set
default port num to 0 when it should be 1. This fixes this scenario
by retrieving uart pot number based on periphral address.
Fixes#69973
Signed-off-by: Sylvio Alves <sylvio.alves@espressif.com>
Employ a code spell checking tool to scan and correct spelling errors
in all files within the drivers/serial directory.
Signed-off-by: Pisit Sawangvonganan <pisit@ndrsolution.com>
The parity, stop bits and data bits config was hard-coded instead of
taken from the device tree.
Signed-off-by: Marco Widmer <marco.widmer@bytesatwork.ch>
Refactor the ESP32 target SOCs together with
all related boards. Most braking changes includes:
- changing the CONFIG_SOC_ESP32* to refer to
the actual soc line (esp32,esp32s2,esp32s3,esp32c3)
- replacing CONFIG_SOC with the CONFIG_SOC_SERIES
- creating CONFIG_SOC_FAMILY_ESP32 to embrace all
the ESP32 across all used architectures
- introducing CONFIG_SOC_PART_NUMBER_* to
provide a SOC model config
- introducing the 'common' folder to hide all
commonly used configs and files.
- updating west.yml to reflect previous changes in hal
Signed-off-by: Marek Matej <marek.matej@espressif.com>
Both the IRQ API and Asynchronous API support callback.
However, since they are both interrupt driven, having
callbacks on both API would interfere with each other
in almost all cases. So this adds a kconfig to signal
that the callbacks should be exclusive to each other.
In other words, if one is set, the other should not
be active. Drivers implementing both APIs have been
updated to remove the callbacks from the other API.
Though, this still leaves the option to disable
the kconfig and allows both APIs to have callbacks
if one desires.
Fixes#48606
Signed-off-by: Daniel Leung <daniel.leung@intel.com>
This include is only required if typeof() macro is used, which
is not the case for the serial / uart driver.
Signed-off-by: Martin Jäger <martin@libre.solar>
In order to bring consistency in-tree, migrate all drivers to the new
prefix <zephyr/...>. Note that the conversion has been scripted, refer
to #45388 for more details.
Signed-off-by: Gerard Marull-Paretas <gerard.marull@nordicsemi.no>
The select uart instance used in uart driver initialization won't
work as expected because the index used was not correct. This
fixes the macro call to use proper index value.
Signed-off-by: Sylvio Alves <sylvio.alves@espressif.com>
HAL call function used to retrieve the configured baudrate
returns the real calculated value, which might not be exactly as
the configured. For baudrate of 115200, HAL api
returns 115201, which then causes uart_basic_api test
to fail. Instead of returning the calculated baudrate value,
returns the configured one.
Signed-off-by: Sylvio Alves <sylvio.alves@espressif.com>
Current gpio and uart initialization level is set to
PRE_KERNEL_2, which won't let uart_console subsystem
to init its hook properly as it has same level.
Prioritize uart and gpio so that the console hooks
are properly initialized.
Signed-off-by: Sylvio Alves <sylvio.alves@espressif.com>
Current uart driver implementation is incompleted regarding the
usage of DT_INST_FOREACH_STATUS_OKAY. If uart0 and uart2 are selected,
build breaks due to peripheral number ordering, which would be
0 and 1 in this case. This fix PR fix this by re-working the macros
and setting proper uart peripheral instances in DTSI, required for signal
routing configuration.
Signed-off-by: Sylvio Alves <sylvio.alves@espressif.com>
After #41918, DEV_CFG removal triggered discard qualifer warning
during build. As uart_hal functions don't required const qualifier
and uart_context_hal_t has modified data, this PR moves hal instace
to data struct instead of config struct.
Signed-off-by: Sylvio Alves <sylvio.alves@espressif.com>
Stop using redundant DEV_DATA/DEV_CFG macros and use dev->data and
dev->config instead.
Signed-off-by: Gerard Marull-Paretas <gerard.marull@nordicsemi.no>
This fixes both TX ready and completed uart
calls to meet valid condition.
Closes#41526Closes#41624
Signed-off-by: Sylvio Alves <sylvio.alves@espressif.com>
ESP32 uart_poll_in should return 0 on success and not
the total amount of data read.
This also adds a check in fifo_fill call to
avoid negative values, otherwise it would send garbage
to uart
Closes#41352
Signed-off-by: Sylvio Alves <sylvio.alves@espressif.com>
Uart post kernel initialization does not allow starting shell
properly. This issue was added in UART unifying PR.
Signed-off-by: Sylvio Alves <sylvio.alves@espressif.com>
In order to have Espressif SoCs working with
the same uart drivers, all low level functions
are now replaced to hal_espressif HAL calls.
This also changes pinmux, gpio and uart
init order to meet its dependencies.
Signed-off-by: Sylvio Alves <sylvio.alves@espressif.com>
Refactors all of the serial drivers to use a shared driver class
initialization priority configuration, CONFIG_SERIAL_INIT_PRIORITY, to
allow configuring serial drivers separately from other devices. This is
similar to other driver classes like I2C and SPI.
The default is set to CONFIG_KERNEL_INIT_PRIORITY_DEVICE to preserve the
existing default initialization priority for most drivers. The one
exception is uart_lpc11u6x.c which previously used
CONFIG_KERNEL_INIT_PRIORITY_OBJECTS.
This change was motivated by an issue on the frdm_k64f board where the
serial driver was incorrectly initialized before the clock control
driver.
Signed-off-by: Maureen Helm <maureen.helm@intel.com>
1) Allow use of interrup driven instance.
ROM implementation could be selected via dts compatiable.
2) Use UART rx fifo and timeout interrupt for end of message detection.
Added to decrease interrupts count on data reception
3) Use ESP_LL api.
Signed-off-by: Pavlo Hamov <p.hamov@venstar.com>
Replaces the prefixes of gpio_matrix_in and gpio_matrix_out
to unify those function calls on all supported socs.
Signed-off-by: Glauber Maroto Ferreira <glauber.ferreira@espressif.com>
hal_espressif repository was updated from esp-idf v4.2
to esp-idf v4.3 to allow latest Espressif chips integration.
As a consequence, it added a few changes in drivers
and peripherals. To maintain bisectability, changes in this
PR cannot be split. Here are some details:
wifi: update linker script by adding libphy and new attributes.
spi: update some APIs and fixed missing wait_idle check
west.yml: esp32: update hal to new version
Signed-off-by: Sylvio Alves <sylvio.alves@espressif.com>
This kconfig option enables runtime configuration of UART
controllers. This allows application to call uart_configure()
to configure the UART controllers and calling uart_config_get()
to retrieve configuration. If this is disabled, UART controllers
rely on UART driver's initialization function to properly
configure the controller. The main use of this option is mainly
code size reduction.
Fixes#16231
Signed-off-by: Daniel Leung <daniel.leung@intel.com>
Disable RTC WDT enabled (by default) by 2nd stage bootloader in ESP-IDF.
This WDT timer ensures correct hand-over and startup sequence from
bootloader to application.
Enabling bootloader caused system clock initialization to fail
when clock rate is greater then 80MHz. This also fixes
esp32 clock source code.
Signed-off-by: Mahavir Jain <mahavir@espressif.com>
These are all the case that coccinelle cannot find as they are inside
macro declarations.
Fixed via:
git grep -rlz -E "\(struct device \*" |
xargs -0 sed -i 's/(struct device/(const struct device/g'
Fixes#27399
Signed-off-by: Tomasz Bursztyka <tomasz.bursztyka@linux.intel.com>
Now that device_api attribute is unmodified at runtime, as well as all
the other attributes, it is possible to switch all device driver
instance to be constant.
A coccinelle rule is used for this:
@r_const_dev_1
disable optional_qualifier
@
@@
-struct device *
+const struct device *
@r_const_dev_2
disable optional_qualifier
@
@@
-struct device * const
+const struct device *
Fixes#27399
Signed-off-by: Tomasz Bursztyka <tomasz.bursztyka@linux.intel.com>
- Change default CPU Clock to 240MHz
(PLL is activated)
- I2C, UART will use sysclk from clock driver
- esp32_enable_peripheral replaced by
clock_control_on
Signed-off-by: Mohamed ElShahawi <ExtremeGTX@hotmail.com>
Usually, we want to operate only on "available" device
nodes ("available" means "status is okay and a matching binding is
found"), but that's not true in all cases.
Sometimes we want to operate on special nodes without matching
bindings, such as those describing memory.
To handle the distinction, change various additional devicetree APIs
making it clear that they operate only on available device nodes,
adjusting gen_defines and devicetree.h implementation details
accordingly:
- emit macros for all existing nodes in gen_defines.py, regardless
of status or matching binding
- rename DT_NUM_INST to DT_NUM_INST_STATUS_OKAY
- rename DT_NODE_HAS_COMPAT to DT_NODE_HAS_COMPAT_STATUS_OKAY
- rename DT_INST_FOREACH to DT_INST_FOREACH_STATUS_OKAY
- rename DT_ANY_INST_ON_BUS to DT_ANY_INST_ON_BUS_STATUS_OKAY
- rewrite DT_HAS_NODE_STATUS_OKAY in terms of a new DT_NODE_HAS_STATUS
- resurrect DT_HAS_NODE in the form of DT_NODE_EXISTS
- remove DT_COMPAT_ON_BUS as a public API
- use the new default_prop_types edtlib parameter
Signed-off-by: Martí Bolívar <marti.bolivar@nordicsemi.no>
Make drivers multi-instance wherever possible using DT_INST_FOREACH.
This allows removing DT_HAS_DRV_INST in favor of making drivers just
do the right thing regardless of how many instances there are.
There are a few exceptions:
- SoC drivers which use CMake input files (like i2c_dw.c) or otherwise
would require more time to convert than I have at the moment. For the
sake of expediency, just inline the DT_HAS_DRV_INST expansion for
now in these cases.
- SoC drivers which are explicitly single-instance (like the nRF SAADC
driver). Again for the sake of expediency, drop a BUILD_ASSERT in
those cases to make sure the assumption that all supported SoCs have
at most one available instance is valid, failing fast otherwise.
Signed-off-by: Martí Bolívar <marti.bolivar@nordicsemi.no>
