Adds a config that enables sending the object version for all objects.
According to LwM2M specification v1.0 and v1.1, non-core object versions
other than 1.0 'must' be provided, while all other versions 'may' be
provided. With specification v1.2, a client 'can always attach Object
Version Information'. Or in other words, it is OK to always report the
object version with all specifications.
Signed-off-by: Andreas Rudolf <andreas.rudolf@husqvarnagroup.com>
Updates the linker script fragments under 'subsys' to use
Z_LINK_ITERABLE_SUBALIGN for the subalignment instead of
a hardcoded value of 4.
Signed-off-by: Peter Mitsis <peter.mitsis@intel.com>
The IPv6 address lifetime timers are kept in a slist, but
the code that adds the entry to the list does not check
whether the item is already in the list. This will cause
problems when trying to remove the address from the list.
Normally this is not causing issues, but if the function
net_if_ipv6_addr_update_lifetime() is called multiple times
before the address expires, then the item was added to the
slist multiple times.
Signed-off-by: Jukka Rissanen <jukka.rissanen@nordicsemi.no>
Applications need to run a scan to identify the security
mode before attempting the connection which adds to the time
taken for connection to be established.
To avoid the initial scan, support auto security mode which will
enable STA to choose between WPA, WPA2 and WPA3, based on the
network configuration.
Signed-off-by: Ravi Dondaputi <ravi.dondaputi@nordicsemi.no>
Since `NONE` is a valid option for key management in `connect`
command, we should remove the part in help text which says:
"valid only for secure SSIDs".
Signed-off-by: Ravi Dondaputi <ravi.dondaputi@nordicsemi.no>
This commit change a method of printing multicast routes by showing
all interfaces per entry instead of aggregating them by interface.
Signed-off-by: Konrad Derda <konrad.derda@nordicsemi.no>
In order to save memory, a single multicast routing entry now
contains configurable number of network interfaces.
Signed-off-by: Konrad Derda <konrad.derda@nordicsemi.no>
This commit adds a check to determine if the packet wasn't already
forwarded to a given interface.
Signed-off-by: Konrad Derda <konrad.derda@nordicsemi.no>
This commmit changes the way of iterating over multicast routing
entries from explicit for-loop to ARRAY_FOR_EACH_PTR().
Signed-off-by: Konrad Derda <konrad.derda@nordicsemi.no>
The commit 8256d02d3a introduced
getopt parsing for the wifi connect command
This needs to be updated for the wifi ap enable since ap
enable also uses the same parsing as connect.
The use of getopt removes the parameter ordering restrictions
Signed-off-by: Brad Kemp <brad@beechwoods.com>
In case FIN packet included data bytes, Zephyr would ignore the
data. It wasn't passed to the application, and it wasn't considered
when bumping the ACK counter. This ended out in connection timing out,
instead of being properly terminated.
Fix this, by refactoring FIN processing in TCP_ESTABLISHED state.
Instead of handling FIN/FIN,ACK/FIN,ACK,PSH cases separately, have a
common handler when FIN flag is present, and when ACK flag is present
along with FIN. When FIN is present, take any potentially incoming data
into account.
Signed-off-by: Robert Lubos <robert.lubos@nordicsemi.no>
Allow changing the CoAP Block-wise transfers block-size
for subsequent GET requests.
It looks like Leshan switches block size back to its
configured value, if it is smaller.
So even when we send block N=0 with size of 512, Leshan
seem to handle that properly but still asks N=2 with
block size 256(if that is configured).
Signed-off-by: Seppo Takalo <seppo.takalo@nordicsemi.no>
Minor improvements to usage of zperf_shell upload.
Added common defaults for the upload commands arguments.
Print defaults in cmd help.
Throw warning when user sets baud rate for TCP upload.
Signed-off-by: Adam Matus <adam.matus@nxp.com>
The network interface parameter for net_eth_get_vlan_tag() should
be the VLAN interface so use the search loop properly.
Earlier the main interface could be checked.
Add also test cases for this so that we can catch that the func
works properly.
Signed-off-by: Jukka Rissanen <jukka.rissanen@nordicsemi.no>
Add more error logs in case of (mostly) mbed TLS errors, so it's easier
to get an initial idea of what went wrong based on logs only. Getting
an information on an actual mbed TLS error code is quite helpful in such
cases.
Signed-off-by: Robert Lubos <robert.lubos@nordicsemi.no>
Block size is a 3-bit value mapping values [0, 6] to powers of 2 in the
range [16, 1024]. Value 7 is invalid.
The previous formula was not working in case the client's preferred size
was 4 (or more) times bigger than the server's.
This commit takes into account also the case the client's preferred size
is smaller than the server's.
Signed-off-by: Marco Argiolas <marco.argiolas@ftpsolutions.com.au>
Remove IPSP support from the tree.
It has no maintainers, and is regularly broken. The fact that it's
nontrivial to set-up in linux makes it hard to fix reported issues.
Signed-off-by: Jonathan Rico <jonathan.rico@nordicsemi.no>
The "struct sockaddr" should only be used in casts and never
as a standalone variable because it might not have enough
space allocated for all the protocol specific fields.
So refactor the port_in_use() function to reflect that.
Signed-off-by: Jukka Rissanen <jukka.rissanen@nordicsemi.no>
errno values are positive, therefore they should be negated when
assigned as return values for net_dhcpv4_server_start().
Signed-off-by: Robert Lubos <robert.lubos@nordicsemi.no>
The commit adds dependency on Kconfig FLASH_PAGE_LAYOUT to subsystems
that really require it:
FCB, NVS, LittleFS
and removes direct selection from '*.conf' files where no longer
needed.
Signed-off-by: Dominik Ermel <dominik.ermel@nordicsemi.no>
Check if the interface is down before joining IPv4 mDNS multicast
group. This avoids warning later when the network packet cannot be sent.
Fixes#71121
Signed-off-by: Jukka Rissanen <jukka.rissanen@nordicsemi.no>
Commit e99b5228a1 changed the default
networking behavior on qemu platforms, as the SLIP_TAP driver no longer
selected Ethernet L2. In results, qemu platforms in default
configuration had no network interface to work with.
Fix this, by restoring select for NET_L2_ETHERNET, but this time in
NET_SLIP_TAP. The difference is that SLIP_TAP is a generic driver
config, which could be enabled on any platform, so not changing the
behavior here, while NET_SLIP_TAP is a config dedicated for qemu only,
so it's reasonable to enable all that's needed to get SLIP to work with
qemu by default.
As there were circular Kconfig dependencies, move the respective qemu
configs outside of NET_RAW_MODE if block (as this caused the circular
dependency with ETH_DRIVER_RAW_MODE). Also, remove dependency to
NET_L2_BT, as it made little sense there, and also caused dependency
problems.
Signed-off-by: Robert Lubos <robert.lubos@nordicsemi.no>
There is no limitations for dwell time. Just add
valid condition for positive value. So , it's better
to remove those constraints.
Signed-off-by: Kapil Bhatt <kapil.bhatt@nordicsemi.no>
Running out of connection contexts is most likely due to app
misconfiguration, therefore it's useful to get an explicit information
that context allocation failed.
Signed-off-by: Robert Lubos <robert.lubos@nordicsemi.no>
Correct various small edge-case behaviors that have been accidentally
introduced in the http_client.
- http_client_req no longer incorrectly returns -ETIMEDOUT on NULL HTTP
resonse. -ETIMEDOUT is now only returned when the underlying TLS
socket times out.
- http_client_req now returns -ECONRESET upon incomplete (but non-NULL)
HTTP response. The request callback is no longer called in this case
(as with any other error state).
- http_wait_data has been refactored slightly to increase clarity.
Signed-off-by: Georges Oates_Larsen <georges.larsen@nordicsemi.no>
If the packet cloning fails (can easily happen when working with
loopback interface and when having low net_buf count), then
print a warning to the user. Error could also be possible but
as the situation might correct itself in this case, the warning
should be enough.
Signed-off-by: Jukka Rissanen <jukka.rissanen@nordicsemi.no>
If we fail to join all nodes or solicit node multicast groups
when the interface is down, then there is no need to print an
error message. The groups are automatically re-joined when the
interface comes up.
Signed-off-by: Jukka Rissanen <jukka.rissanen@nordicsemi.no>
If user created the capture device using the API and not via
the shell, then the device name was not set. Use the default
capture device in this case.
Signed-off-by: Jukka Rissanen <jukka.rissanen@nordicsemi.no>
The event NET_EVENT_CAPTURE_STARTED is generated when the
capture is enabled, and NET_EVENT_CAPTURE_STOPPED when capture
is disabled.
Signed-off-by: Jukka Rissanen <jukka.rissanen@nordicsemi.no>
The net_capture_pkt() does not return information what happened
to the net_pkt because the packet was always cloned. With cooked
capture we can avoid the cloning in which case we need to know
the capture status in order to unref the packet if needed.
Signed-off-by: Jukka Rissanen <jukka.rissanen@nordicsemi.no>
Add support for capturing arbitrary data via the cooked mode (sll)
capture API. The actual packet capture is done using net_capture_data()
function, the packet capture infrastructure does not need any changes.
Signed-off-by: Jukka Rissanen <jukka.rissanen@nordicsemi.no>
Allow user to create a kitchen sink pseudo a.k.a any network
interface that one is only able to write to. This might seem
unnecessary, but it is possible to attach virtual network
interfaces on top of this pseudo interface. These virtual
interfaces could then process the data for example for
packet capture purposes.
Signed-off-by: Jukka Rissanen <jukka.rissanen@nordicsemi.no>
For debugging purposes it would be nice to see the verdict
printed as a string instead of number.
Signed-off-by: Jukka Rissanen <jukka.rissanen@nordicsemi.no>
Add a recv callback to dummy API. After this it is possible to
receive data by a dummy network interface. This is only useful
if one attaches a virtual interface on top of the dummy one.
One such example is the cooked mode capture interface.
Signed-off-by: Jukka Rissanen <jukka.rissanen@nordicsemi.no>
This commit fixes an issue where due to inverted logic (static function
returned 0 on success but the caller expected true/false) the MLDv2
reports were silently dropped.
Signed-off-by: Konrad Derda <konrad.derda@nordicsemi.no>
Deprecate CONFIG_NET_TCP_ACK_TIMEOUT as it is redundant with the
combination of CONFIG_NET_TCP_INIT_RETRANSMISSION_TIMEOUT and
CONFIG_NET_TCP_RETRY_COUNT. The total retransmission timeout (i. e.
waiting for ACK) should depend on the individual retransmission timeout
and retry count, having separate config is simply ambiguous and
confusing for users.
Moreover, the config was currently only used during TCP handshake, and
for that purpose we could use the very same timeout that is used for the
FIN timeout. Therefore, repurpose the fin_timeout_ms to be a generic,
maximum timeout at the TCP stack.
Signed-off-by: Robert Lubos <robert.lubos@nordicsemi.no>
Add hostname changed printout to event monitor. As the name
says, it is generated when the hostname of the device changes.
Signed-off-by: Jukka Rissanen <jukka.rissanen@nordicsemi.no>
Starting with b1d24e425c (net: lwm2m:
device object: optionally store error list in settings), it was no
longer possible to build the code with coverage enabled when the
settings subsystem was disabled.
The build would fail with an error like this:
> subsys/net/lib/lwm2m/lwm2m_obj_device.c:262: undefined reference to
> `settings_name_steq'
This fixes#70923.
Signed-off-by: Reto Schneider <reto.schneider@husqvarnagroup.com>
According to the `RFC8415` the length of the DUID is at least 1 octet
up to 128 octets. Now a user can choose buffer length without the need
for source code modification.
Signed-off-by: Marcin Gasiorek <marcin.gasiorek@nordicsemi.no>
eth_stats.h is using ethernet api but not including the header,
it must be working by luck in files that include it after
something else that includes ethernet.h, fix by just including it.
Signed-off-by: Declan Snyder <declan.snyder@nxp.com>
Instead of having a single config specifying the memory pool size for
variable-sized net buffers, have a separate one for TX and RX for better
configuration granularity when optimizing memory usage of the
application.
Deprecate the old configuration but use its value as a default (for now)
for the new configs. This will need to change when the config is
deleted.
Signed-off-by: Robert Lubos <robert.lubos@nordicsemi.no>
There should be a particular defines which clarify the
use of that number. So, replacing numbers with defines
in wifi shell.
Signed-off-by: Kapil Bhatt <kapil.bhatt@nordicsemi.no>
Outgoing block-transfers now set the socket hint
to ONGOING as long as the BLOCK1/BLOCK2 header has
MORE flag set to true.
This means as only the last packet in the block-transfer
set the socket hint to LAST or ONE_RESPONSE.
Signed-off-by: Seppo Takalo <seppo.takalo@nordicsemi.no>
Once Wi-Fi is associated few parameters like listen interval and
power-save mode cannot be changed. The state for association is
"ASSOCIATED" and not completed. Even after state transitions to
COMPLETE, it can still go back to other states, e.g., PTK/GTK renewal.
Fix the state check.
Signed-off-by: Chaitanya Tata <Chaitanya.Tata@nordicsemi.no>
