split ext/hal/st into two modules:
- hal_stm32: For the code meant to run on STM32
- hal_st: For the code meant to drive ST components
Fixes#16316
Signed-off-by: Anas Nashif <anas.nashif@intel.com>
Add an option that only invokes the cmake phase of sanitycheck. This
can be useful for any testing that only needs to initial generation
phase of cmake, for example device tree. Also useful if we want to
just generate compile_commands.json files from cmake via:
./sanitycheck -xCMAKE_EXPORT_COMPILE_COMMANDS=1 --cmake-only
Signed-off-by: Kumar Gala <kumar.gala@linaro.org>
This updates all client modules to const char processing of
setting names.
Update of peripheral_dis sample
Signed-off-by: Laczen JMS <laczenjms@gmail.com>
The settings module processes the variable name by splitting it up in
a set of variables. This PR removes the splitting up and keeps the
variable name as one string.
It is an alternative to #16609
The possibility is introduced to register handler including a
separator, or to register a handler for each variable.
The ability is introduced to load a subtree from flash or even to load
a single item.
Two ways to operate on variable and settings_handler names are provided:
settings_name_steq(const char *name, const char *key, const char **next)
which checks if name starts with key, returns 1/0 if it does/does not
the remaining part of name is in next.
settings_name_split(const char *name, char *argv, const char **next)
which splits up name in a part before "/"" that is found in argv and
the remaining part that is in next.
A mutex is added to make settings thread-safe
The settings_handlers list is stored in reverse alphabetical order, this
allows registration of e.g. bt and bt/mesh in separate handlers, the bt
handler itself should not contain any handling of bt/mesh.
A settings_deregister() method is added. Settings_handlers can now be
added/removed when required. This saves RAM when settings_handlers are
not needed.
Tests have been updated to reflect changes in the settings api.
Updates after meeting:
1. Removed settings_deregister
2. Changed settings_name_split() in settings_name_next:
int settings_name_next(const char *name, const char **next): returns
the number of characters before the first separator. This can then be
used to read the correct number of characters from name using strncpy
for processing.
3. New functional test added
Update in settings.h: settings_name_next() changed position -> index
Added some comments in settings.h (settings_name_steq())
Updated tests to reflect change to settings_name_next() and pointer
value comparison. The functional test can now also run on qemu_x86.
Corrected some documentation in header.
Changed registration of handlers to be non ordered.
Changed handler lookup to handle non ordered list of handlers, this
improves handler matching in case different length names are compared
and also makes it easier to add rom based handlers as they will not be
ordered.
Signed-off-by: Laczen JMS <laczenjms@gmail.com>
This is done only for testing purposes, in real life the socket
would be closed if it is not used or needed.
Signed-off-by: Jukka Rissanen <jukka.rissanen@linux.intel.com>
If the socket is closed, then do CAN detach if that is needed.
This way the CAN interrupts are not received if there are no
CAN sockets listening the data.
Signed-off-by: Jukka Rissanen <jukka.rissanen@linux.intel.com>
At the moment there is no real address for local CANBUS socket,
but we can still set protocol family of local socket to AF_CAN
so that for example net-shell "net conn" command can show
information about it.
Signed-off-by: Jukka Rissanen <jukka.rissanen@linux.intel.com>
We need to dispatch the received CAN frame if there are multiple
sockets interested in the same CAN-IDs.
Signed-off-by: Jukka Rissanen <jukka.rissanen@linux.intel.com>
The syscall handler for k_poll() returns error values
instead of killing the caller for various bad arguments,
cover these cases.
Signed-off-by: Andrew Boie <andrew.p.boie@intel.com>
If multithreading is disabled, thread_entry() never runs
since we cannot create threads; the non-multithreading case
was simply dead code.
Indicate to code coverage that CODE_UNREACHABLE should be
skipped.
Signed-off-by: Andrew Boie <andrew.p.boie@intel.com>
These were never getting called anywhere from user mode,
except for k_queue_alloc_append(), but only by virtue of
some workqueue tests.
Signed-off-by: Andrew Boie <andrew.p.boie@intel.com>
Threads that are sleeping forever may be woken up with
k_wakeup(), this shouldn't fail assertions.
Signed-off-by: Andrew Boie <andrew.p.boie@intel.com>
LCOV/gcovr doesn't understand what CODE_UNREACHABLE means.
Adding LCOV_EXCL_LINE to the macro definition unfortunately
doesn't work.
Exclude a bit of code which spins endlessly when multi-
threading is disabled that runs after the coverage report
is dumped.
Signed-off-by: Andrew Boie <andrew.p.boie@intel.com>
We don't get any coverage past when we dump the coverage data,
so exclude the end of the function and move setting the main
thread as nonessential to immediately before the coverage dump.
The comment was also amended.
Signed-off-by: Andrew Boie <andrew.p.boie@intel.com>
data copying and bss zero are called from arch code
before z_cstart(), and coverage data gathering doesn't
work properly at that point. Not all arches use this
code anyway, some do it in optimized assembly instead.
Weak main() is also excluded; it does nothing and every
test overrides it.
Signed-off-by: Andrew Boie <andrew.p.boie@intel.com>
Addresses coverage gaps. Some changes were made so that exited
threads do not have k_thread_abort() called on them.
Signed-off-by: Andrew Boie <andrew.p.boie@intel.com>
Reversed revised ticker implementation pending new design which resolves
the issues described in GH issues #16830.
Signed-off-by: Morten Priess <mtpr@oticon.com>
stm32wb is not yet supported on openocd.
But support on pyocd can be enabled thanks to "pack" feature.
Configure board runner with pyocd and provide guidelines
to configure pyocd.
Signed-off-by: Erwan Gouriou <erwan.gouriou@linaro.org>
Swap_type field implementation is the new mcuboot's trailer field.
This patch makes using of it optional which keeps possibility of being
compatible with older versions of MCUBoot.
Signed-off-by: Andrzej Puzdrowski <andrzej.puzdrowski@nordicsemi.no>
Mcuboot changed TLV in PR: Fix double swap on interrupted revert
(https://github.com/JuulLabs-OSS/mcuboot/pull/485)
Above bugfix changes a little way for upgrade request.
This path introduces re-formatted original mcuboot bootutil_misc.c
code as much as it was reasonable which includes the bugfix
adaptation and support for devices witch have bite erased sate different
than 1 as well.
Signed-off-by: Andrzej Puzdrowski <andrzej.puzdrowski@nordicsemi.no>
TEST configurations don't need to be warned that they're using test
techniques with some side-effects.
On a typical sanitycheck invocation, this warning is one of the only two
that appears in most test runs. In other words this commit gets rid of
half of the entire grep -ri '[[:blank:]]warn' noise that obscures any
work-in-progress warnings or platform specific warnings in the
logs (typically: device tree warnings).
Signed-off-by: Marc Herbert <marc.herbert@intel.com>
Add board suppor for 96Boards Meerkat96 board from Novtech based on
NXP i.MX7 multi core processor. Zephyr is ported to run on the single
core Cortex-M co-processor on this board.
More information about this board can be found in 96Boards website:
https://www.96boards.org/product/imx7-96/
By default Zephyr console output is available via UART1 available at
the 40pin LS connector.
Signed-off-by: Manivannan Sadhasivam <manivannan.sadhasivam@linaro.org>
- Even one-liner statement if () need { }
- you can coalesce assignment and condition if the later tests the
earlier only.
Signed-off-by: Tomasz Bursztyka <tomasz.bursztyka@linux.intel.com>
As title says, struct wdt_config and enum wdt_clock_timeout_cycles are
not used anymore so they can be removed.
Signed-off-by: Tomasz Bursztyka <tomasz.bursztyka@linux.intel.com>
As seen previously, some toolchain are willing to insert padding
at section changes to apply greater alignments by default. This is
especially true with 64-bit builds. USB structures are marked with the
packed attribute and therefore the linker section they land into
must also be byte aligned.
Signed-off-by: Nicolas Pitre <npitre@baylibre.com>
This commit updates counter Kconfig to use logger template to define
COUNTER_LOG_LEVEL option.
Signed-off-by: Piotr Mienkowski <piotr.mienkowski@gmail.com>
Added support for the STM32L496XE series with 512KB internal flash and
256KB SRAM of contiguous addresses.
Signed-off-by: Ioannis Konstantelias <ikonstadel@gmail.com>
stm32l496zg_disco and nucleo_l496zg were depending on STM32L496XG SOC.
With the recent change to STM32L496XX, the dependency should be updated.
Signed-off-by: Ioannis Konstantelias <ikonstadel@gmail.com>
Create source directory for IA32-subarch specific files, and move
qualifying files to that subdirectory.
Signed-off-by: Charles E. Youse <charles.youse@intel.com>
