Instead of new config option for debugging, lets re-use the
existing logging option CONFIG_NETWORKING_WITH_LOGGING that
is found in Kconfig. Unselecting that option will turn off
the debug messages in IP stack.
Change-Id: I4c1e0e91f3959304b7dc2b62d2bf73ec87cd1114
Signed-off-by: Jukka Rissanen <jukka.rissanen@linux.intel.com>
This fixes warnings when compiling without
CONFIG_NETWORKING_WITH_LOGGING.
Change-Id: I50ee7004ba5c662ef2d6ff32b5dd3e1e41a92b5b
Signed-off-by: Luiz Augusto von Dentz <luiz.von.dentz@intel.com>
This reverts commit bf77d902ac.
The commit is reverted because it causes hangs in packet
reception. After transferring data a while, the chip stops
packet reception.
Change-Id: Icb94e978e3ba526314afd5e80f35c877febe8740
Signed-off-by: Jukka Rissanen <jukka.rissanen@linux.intel.com>
This reverts commit e695d43fad.
This commit allows reversal of the commit
bf77d902ac which is called
"cc2520: Rework reception logic". Original code had auto ACK
turned off so we can revert this commit too.
Change-Id: Ic4979d1caa0f4341b9642d8a83ee65cf71562994
Signed-off-by: Jukka Rissanen <jukka.rissanen@linux.intel.com>
If enabled, the stack usage is now printed every 60 secs.
Also changing the code to use the kernel ticks clock API.
Change-Id: I44eabd0c372dfb8983ef379e12e38e5bf94a99d2
Signed-off-by: Jukka Rissanen <jukka.rissanen@linux.intel.com>
The network timers will now use the fiber wakeup to let the
network timer fiber to get the next event. This enables the
timer fiber to sleep much longer and only wakeup when there
is something to do.
Change-Id: Ia69d92392c02b884c036793de41b38b6489c4d2e
Signed-off-by: Jukka Rissanen <jukka.rissanen@linux.intel.com>
There were inconsistencies and outdated information in the Intel
Galileo board instructions. They were also unnecessarily complex.
Corrected inconsistent instructions for copying the stripped ELF file
to the boot device.
Updated description of what output to expect from Galileo firmware
during boot.
Added links to board configuration instructions from Intel website.
Added instructions for configuring PuTTY keyboard mode.
Removed redundant instructions in the sections for boot device
preparation and booting the board.
Simplified the UEFI boot instructions.
Change-Id: Ie1a636a7f88a89f23945eb742536446c6a5829c1
Signed-off-by: Michael LeMay <michael.lemay@intel.com>
I built GRUB on Ubuntu v.15.10, and I found that some of the
dependencies listed in the Galileo documentation do not actually need
to be listed on the apt-get install command line. Some are simply
unnecessary, and others are already listed as dependencies by other
packages in the list.
Change-Id: If6ae0c3abe54a18839e75299a3e9cf006c745d0c
Signed-off-by: Michael LeMay <michael.lemay@intel.com>
Clockgating was disabled for RTC and disabling RTC had no
effect on Quark SE boards.
Change-Id: I67448d5582a206fc7a68d763d504e9f743043b53
Signed-off-by: Anas Nashif <anas.nashif@intel.com>
This enables using dtls_server with Bluetooth by passing
CONF_FILE=prj_bt.conf, it is also enabled for testing so changes to
dtls-server are actually tested with NETWORKING_WITH_BT.
Change-Id: Ice4f409c8e2d9e97856159482969f6352264864b
Signed-off-by: Luiz Augusto von Dentz <luiz.von.dentz@intel.com>
It is prefered to use #if (!)defined form for checking defines since it
can actually check more complex conditions.
Change-Id: Ia8ab6898d340967759a8ecbda65c4bcacdc0293e
Signed-off-by: Luiz Augusto von Dentz <luiz.von.dentz@intel.com>
This enables using coap-observe-client with Bluetooth by passing
CONF_FILE=prj_bt.conf, it is also enabled for testing so changes to
coap-observe-client are actually tested with NETWORKING_WITH_BT.
Change-Id: I02705f855c1974b065557986f9b231201ba310a7
Signed-off-by: Luiz Augusto von Dentz <luiz.von.dentz@intel.com>
It is prefered to use #if (!)defined form for checking defines since it
can actually check more complex conditions.
Change-Id: I80b97d51cb321d84df417f8722e661d944504d4f
Signed-off-by: Luiz Augusto von Dentz <luiz.von.dentz@intel.com>
This enables using coap_server with Bluetooth by passing
CONF_FILE=prj_bt.conf, it is also enabled for testing so changes to
coap_server are actually tested with NETWORKING_WITH_BT.
Change-Id: I58b286520da0e0e4cba77dd52ea3f64f0268582a
Signed-off-by: Luiz Augusto von Dentz <luiz.von.dentz@intel.com>
It is prefered to use #if (!)defined form for checking defines since it
can actually check more complex conditions.
Change-Id: I2080377b4b95e9d973e8c0753ae66dba151372e6
Signed-off-by: Luiz Augusto von Dentz <luiz.von.dentz@intel.com>
It will possible to source the project environment file from
both zsh and bash.
Change-Id: Ib6cbf4259378433bcf28a042898b69bb4b6b2a82
Signed-off-by: Yannis Damigos <giannis.damigos@gmail.com>
Updated note text based on code review.
Change-Id: I0f32c5821b37062d23ddbf2252ae8b3d4c8739b5
Signed-off-by: Jennifer Marandola <jennifer.marandola@windriver.com>
Use linker symbol and board configs to determine the start
and extent of remaining RAM present in a board and use
it as newlib's heap.
Change-Id: I7128cf2857664331d83f212f27e8af7ad3bb8936
Signed-off-by: Jithu Joseph <jithu.joseph@intel.com>
It should be made clear that this example is specific to the Quark SE
development board.
Change-Id: Ia3e0ec728891eb586bf1461ae9103ce34fd5e24f
Signed-off-by: Vinicius Costa Gomes <vinicius.gomes@intel.com>
The check was wrong and was checking twice for the QMSI version.
Change-Id: I7a73cc6523f141cae0e69b1a51791f6be87cb6de
Signed-off-by: Vinicius Costa Gomes <vinicius.gomes@intel.com>
The Arduino Due requires a specific version of the bossa tool
to facilite the flashing process. The working one is on a branch
in the bossa github project. So make it clear that we need that
particular branch of bossa to work.
Change-Id: Ic7290dd4d7812f1cad4d87ad282dc90ea9b29c01
Signed-off-by: Daniel Leung <daniel.leung@intel.com>
General grammar edits: removed an "is is", added clarification, and
removed Latin abbreviation as per style guide reqs.
Change-Id: Ie9365dea2cdf27c107675487d4bf392711f4acb2
Signed-off-by: L.S. Cook <leonax.cook@intel.com>
Much of this doc is comparable to memory_maps, so edits make the overall
language and structure consistent among files. Added heading syntax to
APIs, make imperative verbs on API notes, as discussed in code reviews and
on previous edits.
Change-Id: I8e14b44007acdf5422d75810dde78aef1a9c653a
Signed-off-by: L.S. Cook <leonax.cook@intel.com>
Minor language corrections, example heading, bullet and bold added
to be consistent with the other microkernel reference docs.
Change-Id: I371cffcb60d09308c1b26701830dbbc0ddeb745d
Signed-off-by: L.S. Cook <leonax.cook@intel.com>
ia32/soc.h is only used by QEMU, but QEMU's INTx routing does not follow
the "standard design consideration".
Instead, the pins are swizzled based on the PCI slot. They are then
routed to IRQs based on the PIIX PIRQ configuration.
For simplicity use hard-coded values for the PIIX PIRQ configuration,
though it may be desirable in the future to determine these dynamically.
Also change the number of PCI buses to 1 and remove irrelevant comments.
Change-Id: I1592009a43dd8a9c5a7c54788fba52f14687ba35
Signed-off-by: Ido Yariv <ido@wizery.com>
The app-facing interface for configuring interrupts was never
formally defined, instead it was defined separately for each arch
in their respective arch-specific header files. Occasionally these
would go out of sync.
Now there is a single irq.h header which defines this interface.
To avoid runtime overhead, these map to _arch_* implementations of
each that must be defined in headers pulled in by arch/cpu.h.
Change-Id: I69afbeff31fd07f981b5b291f3c427296b00a4ef
Signed-off-by: Andrew Boie <andrew.p.boie@intel.com>
setreg(CC2520_EXCFLAG0, 0) is in print_radio_status(), it should
be in print_exceptions_0().
Change-Id: I62bd366b850f0a1abef651cfa8de8939b6c30685
Signed-off-by: Ravi kumar Veeramally <ravikumar.veeramally@linux.intel.com>
The deleted defaults cannot be overriden by defaults defined
in SoC's Kconfig file. The number of IRQ priority level was
always one, and this caused some code to be dropped within
the fast IRQ handling code. When the electrons aligned in
certain way, undesired effects were observed (e.g. exception,
faults, etc.) when regular IRQs were mixed with fast IRQs.
Moreover, ARC cores are high configurable on hardware level.
So let the SoC config define these values instead.
Change-Id: I2a338d2efc814c46b0f68ab100fc0f66ae0fb60c
Signed-off-by: Daniel Leung <daniel.leung@intel.com>
The auto ack does not seem to work properly. I am seeing that
the driver claims to have sent a packet but nothing is seen
in the air. Because of this the auto ACK cannot be turned on
right now as it would break connectivity.
Change-Id: I4e71e14a2058cc4f64740a8f4b390ba21a01cb23
Signed-off-by: Jukka Rissanen <jukka.rissanen@linux.intel.com>
Adds values to be validated during examining Secure Simple Pairing exchange IO
capabilities and bond types.
Change-Id: I3f25fa863b9a8a46c0a0e3c366e8b915c7db0bc7
Signed-off-by: Arkadiusz Lichwa <arkadiusz.lichwa@tieto.com>
Adds HCI protocol type for Secure Simple Pair Complete event and enables the
event in controller.
Then implements the initial SSP Complete event handler with catching
the status of SSP process.
Change-Id: Ic7cc5b4cab8a1b4120285815c24eeb6483d748df
Signed-off-by: Arkadiusz Lichwa <arkadiusz.lichwa@tieto.com>
Enables IO Capability Request event in controller.
Adds handler to react on controller's IO Capability Request event during
incoming pairing.
As a initial case respond to the request with negative reply setting
reason as 'pairing not allowed'.
Change-Id: I161c7ab7f1031a78cfa50444f41624232e5c5146
Signed-off-by: Arkadiusz Lichwa <arkadiusz.lichwa@tieto.com>
Those two indicate SMP failure, so while in keys distribution phase,
if we receive Pairing Failed, or there is SMP Timeout, the keys
distributed so far shall considered as invalid and cleared.
Another flag SMP_FLAG_KEYS_DISTRO is needed to save the old keys
if this failure appears before distribution of new keys.
Change-Id: I9a917740c02955aa149170b84ae547f5c8c4b7ad
Signed-off-by: Mariusz Skamra <mariusz.skamra@tieto.com>
Enables IO Capability Response event in controller and adds remote IO Capability
and authentication fields to connection object.
Initializes them using IO exchange values delivered in SSP IO Capability
Response event data set representing remote as a part of incoming pairing
process.
Change-Id: Ia73a912f6fb633d1d1bb086ef3af9a280ac5a864
Signed-off-by: Arkadiusz Lichwa <arkadiusz.lichwa@tieto.com>
Turns on Secure Simple Pairing mode in controller. Since there's a prerequisite
the controller is 4.0+, turning the mode is unconditional.
Change-Id: Id4a10ccf8892a430b0daaa6750835516b17b7e8a
Signed-off-by: Arkadiusz Lichwa <arkadiusz.lichwa@tieto.com>
API notes needed a bit of clarification, fixed typo of file name.
Change-Id: I57438165fb2fc3da796fcde19d58a46862ffbbd9
Signed-off-by: L.S. Cook <leonax.cook@intel.com>
Fixed indentation and align text. Also remove to many levels of bullets
and streamline text.
Change-Id: I734f96666277e39b5aafc99ace754d129ecdd0be
Signed-off-by: Anas Nashif <anas.nashif@intel.com>
That implementation is not galileo-specific, but rather a generic way of
rebooting an x86 target. Needs SoC support.
Change-Id: I9c3374a8ab57a624d9d9b7090260c5b11fe4e773
Signed-off-by: Benjamin Walsh <benjamin.walsh@windriver.com>
Like for the other context-specific APIs, also provide a
context-agnostic wrapper.
Change-Id: Icf0a62f4c06aec42f0febc298edbd8bdeec63749
Signed-off-by: Benjamin Walsh <benjamin.walsh@windriver.com>
A call to xxx_fiber_wakeup() if the timeout had expired would put the
fiber on the fiber ready queue _again_, corrupting it, or could remove
the fiber from a nanokernel object wait queue, prematurely un-pending
it.
We now verify the fiber is indeed still on the timeout queue and also
not on a wait queue, meaning the fiber is indeed sleeping.
Change-Id: Iba454d79ab50db01632b0591fb7b589221b5110b
Signed-off-by: Benjamin Walsh <benjamin.walsh@windriver.com>
