zephyr

History

Tomasz Bursztyka e18fcbba5a device: Const-ify all device driver instance pointers Now that device_api attribute is unmodified at runtime, as well as all the other attributes, it is possible to switch all device driver instance to be constant. A coccinelle rule is used for this: @r_const_dev_1 disable optional_qualifier @ @@ -struct device * +const struct device * @r_const_dev_2 disable optional_qualifier @ @@ -struct device * const +const struct device * Fixes #27399 Signed-off-by: Tomasz Bursztyka <tomasz.bursztyka@linux.intel.com>		2020-09-02 13:48:13 +02:00
..
src	device: Const-ify all device driver instance pointers	2020-09-02 13:48:13 +02:00
CMakeLists.txt	samples: make find_package(Zephyr...) REQUIRED	2020-05-29 10:47:25 +02:00
prj.conf	samples: bluetooth: adding hci_rpmsg sample	2019-11-20 19:29:06 +01:00
README.rst	doc: reference: Clean up and restructure a bit	2020-03-18 11:47:24 +01:00
sample.yaml	sanitycheck: inclusive language	2020-08-27 07:04:07 -04:00

README.rst

.. _bluetooth-hci-rpmsg-sample:

Bluetooth: HCI RPMsg
####################

Overview
********

This sample exposes :ref:`bluetooth_controller` support
to another device or CPU using RPMsg transport which is
a part of `OpenAMP <https://github.com/OpenAMP/open-amp/>`__.

Requirements
************

* A board with :ref:`ipm_api` driver and Bluetooth LE support

Building and Running
********************

This sample can be found under :zephyr_file:`samples/bluetooth/hci_rpmsg`
in the Zephyr tree.

To use this application, you need a board with a Bluetooth controller
and IPM drivers.
You can then build this application and flash it onto your board in
the usual way. See :ref:`boards` for board-specific building and
programming information.

To test this sample, you need a separate device/CPU that acts as Bluetooth
HCI RPMsg peer.
This sample is compatible with the HCI RPMsg driver provided by
Zephyr's Bluetooth :ref:`bt_hci_drivers` core. See the
:option:`CONFIG_BT_RPMSG` configuration option for more information.

You might need to adjust the Kconfig configuration of this sample to make it
compatible with the peer application. For example, :option:`CONFIG_BT_MAX_CONN`
must be equal to the maximum number of connections supported by the peer application.

Refer to :ref:`bluetooth-samples` for general information about Bluetooth samples.