patrick/zephyr
1
0
Fork 0
Code Issues Pull requests Actions 7 Packages Projects Releases Wiki Activity
zephyr/modules
History
Henrik Brix Andersen bc4b49c149 modules: canopennode: process rx buffers in priority order 
The CANopenNode stack expects registered RX buffers to be processed and
matched in priority order. The priority corresponds to the index of each
each registered RX buffer with lower indexes having higher priority.

Depending on the CANopen COB-ID network configuration used, it may result
in overlapping CAN RX filters. In the case of overlaps, the priorities of
the registered RX buffers matter.

When receiving a CAN frame, process the RX buffers in priority order and
only dispatch the callback for the matching object with the highest
priority.

Fixes: #54364

Signed-off-by: Henrik Brix Andersen <hebad@vestas.com>
2023-02-23 07:54:02 -05:00
..
canopennode modules: canopennode: process rx buffers in priority order 2023-02-23 07:54:02 -05:00
fatfs fs/fatfs: Move FF_USE_LFN logic to Kconfig 2023-02-20 09:44:18 +01:00
hal_ethos_u modules: add an Arm Ethos-U HAL module 2022-11-15 14:47:43 +01:00
hal_gigadevice soc: gd32a50x: introduce gd32a50x soc series 2023-01-12 21:45:38 +01:00
hal_infineon modules: hal_infineon: fix CMake Warning when build non Infineon device 2022-05-16 10:17:29 +02:00
hal_nordic modules: hal_nordic: 802.15.4 carrier functions made optional 2023-02-22 16:46:15 +01:00
hal_nxp hal: nxp: Check Kconfig before including HAL 2022-11-01 21:41:55 -05:00
hal_rpi_pico build: drop LEGACY_INCLUDE_PATH support 2023-02-21 15:06:48 +01:00
liblc3 modules: liblc3: Rename the module for consistency 2022-08-22 20:40:59 +02:00
littlefs treewide: Use CONFIG_*_ENDIAN instead of __BYTE_ORDER__ 2022-10-28 19:23:46 +09:00
loramac-node modules: loramac-node: fix CN470 linking 2022-09-26 09:38:49 +00:00
lz4 kconfig: remove Enable from boolean prompts 2022-03-09 15:35:54 +01:00
mbedtls modules: mbedtls: Allow for enabling LMS algorithms 2023-02-23 10:51:31 +01:00
nanopb kconfig: remove Enable from boolean prompts 2022-03-09 15:35:54 +01:00
openthread manifest: openthread: openthread upmerge to 242c7cc 2023-02-20 13:24:07 +01:00
segger modules: build segger debugmon code with config 2022-12-28 12:00:46 +01:00
tflite-micro treewide: Update deprecated CONFIG_LIB_CPLUSPLUS usages 2023-01-13 17:42:55 -05:00
thrift modules: add thrift module 2023-02-09 20:30:21 +09:00
TraceRecorder Modules: Percepio TraceRecorder: Update module from v4.5.2 to v4.6.0(RC1) 2022-02-01 07:45:09 -05:00
trusted-firmware-a modules: tfa: integrate trusted-firmware-a 2022-09-09 16:36:37 +00:00
trusted-firmware-m modules: trusted-firmware-m: Allow application to use qcbor TF-M 2023-02-11 07:59:06 +09:00
uoscore-uedhoc modules: Add uoscore-uedhoc repository 2022-08-12 16:17:59 +02:00
zcbor modules: zcbor: Fix ZCBOR_ASSERT kconfig typo 2022-09-08 15:30:47 +00:00
Kconfig modules: add thrift module 2023-02-09 20:30:21 +09:00
Kconfig.altera ext: hal: Remove Altera HAL from the tree and use a module 2020-03-20 09:07:16 -04:00
Kconfig.atmel kconfig: Clean up header comments and make them consistent 2019-11-04 17:31:27 -05:00
Kconfig.cmsis modules/cmsis: Change libc requirement to allow picolibc 2023-01-26 10:10:45 +00:00
Kconfig.cmsis_dsp math: Introduce a DSP basicmath subsystem with a cmsis backend 2022-12-02 20:15:55 +01:00
Kconfig.cmsis_nn modules: cmsis: integrate CMSIS-NN 2022-03-22 12:56:02 +01:00
Kconfig.cypress kconfig: Clean up header comments and make them consistent 2019-11-04 17:31:27 -05:00
Kconfig.eos_s3 modules: add Kconfig for QuickLogic EOS S3 module 2020-09-04 14:48:49 -04:00
Kconfig.esp32 soc: xtensa: esp32_net: update kconfig 2022-08-16 18:06:02 +02:00
Kconfig.imx drivers: pinctrl: refactor pin control support for imx rt 2022-05-12 16:57:17 -05:00
Kconfig.infineon drivers: dma: Add infineon xmc4xxx dma support 2023-02-21 21:15:53 +01:00
Kconfig.libmetal kconfig: Replace non-defconfig single-symbol 'if's with 'depends on' 2020-02-12 10:32:34 -06:00
Kconfig.lvgl modules: lvgl: change mentions of "LittleVGL" to "LVGL" 2022-12-16 09:31:41 +01:00
Kconfig.mcuboot_bootutil everywhere: fix typos 2022-03-18 13:24:08 -04:00
Kconfig.mcux nxp_imx: rt: add XBARA Inter-Peripheral Crossbar Switch Kconfig option 2022-07-01 16:23:11 +00:00
Kconfig.microchip modules: Add entry for Microchip mpfs hal 2022-05-06 11:32:54 +02:00
Kconfig.nuvoton soc: arm: add support for nuvoton numicro m48x series 2020-07-01 21:09:25 +02:00
Kconfig.open-amp ipc: openamp: Expose config options for MASTER/SLAVE builds 2020-03-27 15:20:25 -05:00
Kconfig.s32 soc: arm: introduce NXP S32Z/E support 2022-10-14 09:51:14 +02:00
Kconfig.silabs kconfig: Clean up header comments and make them consistent 2019-11-04 17:31:27 -05:00
Kconfig.simplelink kconfig: Clean up header comments and make them consistent 2019-11-04 17:31:27 -05:00
Kconfig.sof modules: Add Sound Open Firmware module 2021-01-06 07:53:46 -06:00
Kconfig.st modules/hal_st: Align sensor drivers to stmemsc HAL i/f v1.03 2020-10-13 09:46:08 -05:00
Kconfig.stm32 module: Kconfig stm32 includes the DELAYBLOCK (DLYB) 2022-05-12 14:56:25 -05:00
Kconfig.syst logging: add STP transport and raw data output support for syst 2020-11-17 10:09:19 -06:00
Kconfig.telink modules: hal_telink: introduce new HAL Telink module 2021-07-21 05:37:12 -04:00
Kconfig.tinycrypt ext: crypto: Remove TinyCrypt from the tree and use a module 2020-03-20 17:29:48 +01:00
Kconfig.vega modules: vega: add option for indicating the presence of RV32M1 TPM 2020-01-13 09:12:34 -06:00
Kconfig.wurthelektronik modules: Added hal_wurthelektronik module. 2022-08-31 21:47:58 +00:00
Kconfig.xtensa xtensa: add support to build HAL as part of build process 2019-12-18 20:24:18 -05:00
modules.cmake cmake: zephyr modules: sanitize all module name when used as variable 2021-01-20 12:59:19 +01:00