.. |
beetle_clock_control.c
|
drivers: clock_control: Refactor drivers to use shared init priority
|
2021-10-19 23:05:25 -04:00 |
clock_agilex.c
|
drivers: clock_control: Refactor drivers to use shared init priority
|
2021-10-19 23:05:25 -04:00 |
clock_agilex_ll.c
|
drivers: clock_control: Add clock driver for Intel SoC FPGA Agilex
|
2021-10-12 08:37:03 -04:00 |
clock_control_esp32.c
|
drivers: clock_control: Refactor drivers to use shared init priority
|
2021-10-19 23:05:25 -04:00 |
clock_control_esp32.h
|
soc: esp32: use same rom func prefix
|
2021-10-21 10:55:45 -04:00 |
clock_control_esp32s2.c
|
drivers: clock_control: Refactor drivers to use shared init priority
|
2021-10-19 23:05:25 -04:00 |
clock_control_litex.c
|
drivers: clock_control: Refactor drivers to use shared init priority
|
2021-10-19 23:05:25 -04:00 |
clock_control_litex.h
|
drivers: clock control: Add LiteX clock control driver
|
2020-12-06 12:35:16 -05:00 |
clock_control_lpc11u6x.c
|
drivers: clock_control: Refactor drivers to use shared init priority
|
2021-10-19 23:05:25 -04:00 |
clock_control_lpc11u6x.h
|
drivers: clock_control: lpc11u6x: Add support for clock controller
|
2020-07-29 20:12:24 +02:00 |
clock_control_mchp_xec.c
|
drivers: clock_control: Refactor drivers to use shared init priority
|
2021-10-19 23:05:25 -04:00 |
clock_control_mcux_ccm.c
|
drivers: clock_control: Refactor drivers to use shared init priority
|
2021-10-19 23:05:25 -04:00 |
clock_control_mcux_ccm_rev2.c
|
drivers: clock_control: Refactor drivers to use shared init priority
|
2021-10-19 23:05:25 -04:00 |
clock_control_mcux_mcg.c
|
drivers: clock_control: Refactor drivers to use shared init priority
|
2021-10-19 23:05:25 -04:00 |
clock_control_mcux_pcc.c
|
drivers: clock_control: Refactor drivers to use shared init priority
|
2021-10-19 23:05:25 -04:00 |
clock_control_mcux_scg.c
|
drivers: clock_control: Refactor drivers to use shared init priority
|
2021-10-19 23:05:25 -04:00 |
clock_control_mcux_sim.c
|
drivers: clock_control: Refactor drivers to use shared init priority
|
2021-10-19 23:05:25 -04:00 |
clock_control_mcux_syscon.c
|
drivers: clock_control: Refactor drivers to use shared init priority
|
2021-10-19 23:05:25 -04:00 |
clock_control_npcx.c
|
drivers: clock_control: Refactor drivers to use shared init priority
|
2021-10-19 23:05:25 -04:00 |
clock_control_nrf.c
|
drivers: clock_control: Refactor drivers to use shared init priority
|
2021-10-19 23:05:25 -04:00 |
clock_control_rcar_cpg_mssr.c
|
drivers: clock_control: Refactor drivers to use shared init priority
|
2021-10-19 23:05:25 -04:00 |
clock_control_rv32m1_pcc.c
|
drivers: clock_control: Refactor drivers to use shared init priority
|
2021-10-19 23:05:25 -04:00 |
clock_stm32_ll_common.c
|
drivers: clock_control: Refactor drivers to use shared init priority
|
2021-10-19 23:05:25 -04:00 |
clock_stm32_ll_common.h
|
drivers/clock_controller: stm32: Prepare for dts based configuration
|
2021-04-27 11:53:37 +02:00 |
clock_stm32_ll_h7.c
|
drivers: clock_control: Refactor drivers to use shared init priority
|
2021-10-19 23:05:25 -04:00 |
clock_stm32_ll_mp1.c
|
drivers: clock_control: Refactor drivers to use shared init priority
|
2021-10-19 23:05:25 -04:00 |
clock_stm32_ll_u5.c
|
drivers: clock_control: Refactor drivers to use shared init priority
|
2021-10-19 23:05:25 -04:00 |
clock_stm32f0_f3.c
|
include/drivers/clock_control: stm32: Update for F0/F3/G0/G4 support
|
2021-04-29 16:41:26 +02:00 |
clock_stm32f1.c
|
clock_control: stm32f1: fix STM32_PLL_XTPRE check
|
2021-05-05 08:42:53 -04:00 |
clock_stm32f2_f4_f7.c
|
drivers/clock_controller: stm32: Prepare for dts based configuration
|
2021-04-27 11:53:37 +02:00 |
clock_stm32g0.c
|
drivers/clock_controller: stm32: Prepare for dts based configuration
|
2021-04-29 16:41:26 +02:00 |
clock_stm32g4.c
|
drivers: clock_control: clock_stm32g4: Fix ifdef STM32_LSE_CLOCK
|
2021-07-21 06:29:31 -04:00 |
clock_stm32l0_l1.c
|
drivers/clock_control: stm32 l0/l1: Update for DT based configuration
|
2021-04-29 16:41:26 +02:00 |
clock_stm32l4_l5_wb_wl.c
|
drivers: clock_control: stm32: enable PWR clock unconditionally
|
2021-08-19 08:51:10 -05:00 |
CMakeLists.txt
|
drivers: clock_control: nrf: Fix calibration dependencies
|
2021-10-13 06:23:05 -04:00 |
Kconfig
|
drivers: clock_control: Refactor drivers to use shared init priority
|
2021-10-19 23:05:25 -04:00 |
Kconfig.beetle
|
drivers: clock_control: Refactor drivers to use shared init priority
|
2021-10-19 23:05:25 -04:00 |
Kconfig.esp32
|
drivers: esp32/clock_control: Add Clock Driver
|
2020-06-16 09:00:51 -05:00 |
Kconfig.esp32s2
|
esp32s2: drivers: clock_control: add support
|
2021-09-27 22:02:08 -04:00 |
Kconfig.litex
|
drivers: clock control: Add LiteX clock control driver
|
2020-12-06 12:35:16 -05:00 |
Kconfig.lpc11u6x
|
drivers: clock_control: lpc11u6x: Add support for clock controller
|
2020-07-29 20:12:24 +02:00 |
Kconfig.mcux_ccm
|
kconfig: Clean up header comments and make them consistent
|
2019-11-04 17:31:27 -05:00 |
Kconfig.mcux_ccm_rev2
|
drivers: clock_control: add ccm driver for rt117x
|
2021-06-29 11:30:00 -04:00 |
Kconfig.mcux_mcg
|
kconfig: Clean up header comments and make them consistent
|
2019-11-04 17:31:27 -05:00 |
Kconfig.mcux_pcc
|
kconfig: Clean up header comments and make them consistent
|
2019-11-04 17:31:27 -05:00 |
Kconfig.mcux_scg
|
kconfig: Clean up header comments and make them consistent
|
2019-11-04 17:31:27 -05:00 |
Kconfig.mcux_sim
|
kconfig: Clean up header comments and make them consistent
|
2019-11-04 17:31:27 -05:00 |
Kconfig.mcux_syscon
|
drivers: Add NXP LPC clock control driver
|
2020-10-15 11:17:24 -05:00 |
Kconfig.npcx
|
driver: clock: npcx: add a option to generate LFCLK via XTSOC
|
2021-07-12 23:34:42 +03:00 |
Kconfig.nrf
|
drivers: clock_control: nrf: Fix calibration dependencies
|
2021-10-13 06:23:05 -04:00 |
Kconfig.rcar
|
drivers: clock_control: add R-Car CPG MSSR driver
|
2021-04-22 10:38:45 +02:00 |
Kconfig.rv32m1
|
kconfig: Clean up header comments and make them consistent
|
2019-11-04 17:31:27 -05:00 |
Kconfig.stm32
|
drivers: clock_control: Refactor drivers to use shared init priority
|
2021-10-19 23:05:25 -04:00 |
Kconfig.stm32f0_f3
|
drivers: clock_control: stm32f0/f3: fix PREDIV options
|
2020-07-05 07:56:21 -04:00 |
Kconfig.stm32f1
|
drivers/clock_control: stm32f1: Deal with stm32f100xx devices
|
2021-05-04 13:02:26 -05:00 |
Kconfig.stm32f2_f4_f7
|
kconfig: Clean up header comments and make them consistent
|
2019-11-04 17:31:27 -05:00 |
Kconfig.stm32g0
|
drivers: clock_control: stm32g0: add support for g051, g0b1, g0b0 socs
|
2021-03-17 11:30:20 +01:00 |
Kconfig.stm32g4
|
kconfig: Clean up header comments and make them consistent
|
2019-11-04 17:31:27 -05:00 |
Kconfig.stm32h7
|
drivers: clock_control: add support for PLL3 on STM32 H7
|
2021-01-12 06:49:10 -05:00 |
Kconfig.stm32l0_l1
|
kconfig: Clean up header comments and make them consistent
|
2019-11-04 17:31:27 -05:00 |
Kconfig.stm32l4_l5_wb_wl
|
drivers: clock_control: add STM32WL support
|
2021-02-19 22:39:24 -05:00 |
Kconfig.xec
|
Microchip: MEC172x clock control driver
|
2021-07-21 17:46:07 -04:00 |
nrf_clock_calibration.c
|
device: Const-ify all device driver instance pointers
|
2020-09-02 13:48:13 +02:00 |
nrf_clock_calibration.h
|
drivers: clock_control: nrf: Make use of related nrfx drivers
|
2020-08-31 12:40:47 +02:00 |