| .. |
|
96b_aerocore2
|
boards: stm32: pinmux: Restore Kconfig control on pinmux (adc)
|
2020-05-20 12:09:19 +02:00 |
|
96b_argonkey
|
board: arm: Enable MPU for all STM32 boards supporting it
|
2020-06-19 08:55:44 -05:00 |
|
96b_avenger96
|
board: arm: Enable MPU for all STM32 boards supporting it
|
2020-06-19 08:55:44 -05:00 |
|
96b_carbon
|
boards: stm32: pinmux: Restore Kconfig control on pinmux (i2c)
|
2020-05-20 12:09:19 +02:00 |
|
96b_carbon_nrf51
|
boards: dts: nrf: Remove SoC compatible in top-level compatible
|
2020-04-29 08:20:15 -05:00 |
|
96b_meerkat96
|
boards: arm: Conditionalize serial pinmuxes on nxp boards
|
2020-05-22 14:56:00 +02:00 |
|
96b_neonkey
|
board: arm: Enable MPU for all STM32 boards supporting it
|
2020-06-19 08:55:44 -05:00 |
|
96b_nitrogen
|
boards: Remove Kconfig I2C_[0-9] usage
|
2020-05-06 10:55:38 -05:00 |
|
96b_stm32_sensor_mez
|
boards: stm32: pinmux: Restore Kconfig control on pinmux (i2s)
|
2020-05-20 12:09:19 +02:00 |
|
96b_wistrio
|
spi-device: set CS gpio flags for all devices that had none
|
2020-07-09 06:07:07 -05:00 |
|
actinius_icarus
|
boards: arm: nrf: Remove Kconfig PWM_[0-3] usage
|
2020-05-05 08:40:19 -05:00 |
|
adafruit_feather_m0_basic_proto
|
boards: arm: remove the explicit --offset flag
|
2020-07-02 08:23:03 -04:00 |
|
adafruit_feather_nrf52840
|
boards: fix misleading size for partition
|
2020-05-13 21:25:29 +02:00 |
|
adafruit_feather_stm32f405
|
boards: remove usage of deprecated GPIO flags from .dts
|
2020-06-16 19:13:05 +02:00 |
|
adafruit_itsybitsy_m4_express
|
boards: arm: enable and document preipherals on the ItsyBitsy M4
|
2020-07-28 10:29:48 -05:00 |
|
adafruit_trinket_m0
|
boards: arm: configure and document the bootloader on the Trinket M0
|
2020-07-22 13:24:37 +02:00 |
|
arduino_due
|
drivers: i2c: i2c_sam_twi: rework device tree support
|
2020-04-21 15:46:30 -05:00 |
|
arduino_nano_33_iot
|
boards: arm: add the Arduino Nano 33 IOT
|
2020-07-24 12:01:50 +02:00 |
|
arduino_zero
|
boards: arm: enable PWM on the Arduino Zero
|
2020-07-01 08:10:59 -05:00 |
|
atsamd20_xpro
|
spi-device: set CS gpio flags for all devices that had none
|
2020-07-09 06:07:07 -05:00 |
|
atsamd21_xpro
|
boards: atsamd21_xpro: Support driving on-board LED with PWM
|
2020-07-02 08:39:33 -04:00 |
|
atsame54_xpro
|
boards: atsame54_xpro: Support driving on-board LED with PWM
|
2020-07-04 07:09:28 -04:00 |
|
atsamr21_xpro
|
boards: arm: samr21_xpro: Add atmel xplained-pro headers
|
2020-07-13 11:54:29 +02:00 |
|
b_l4s5i_iot01a
|
boards: arm: b_l4s5i_iot01a overlapping flash partitions
|
2020-07-01 08:07:36 -04:00 |
|
b_l072z_lrwan1
|
boards: arm: b_l072z_lrwan1: Add flash support
|
2020-07-06 08:18:35 -05:00 |
|
bbc_microbit
|
boards: dts: nrf: Remove SoC compatible in top-level compatible
|
2020-04-29 08:20:15 -05:00 |
|
bcm958401m2
|
driver: uart: ns16550: convert to DT_INST_*
|
2020-03-14 02:22:05 +02:00 |
|
bcm958402m2_a72
|
boards: arm: bcm958402m2_a72: remove CONFIG_PCIE
|
2020-07-14 19:35:31 -04:00 |
|
bcm958402m2_m7
|
boards: arm: Add bcm958402m2_m7 board
|
2020-05-08 10:46:23 +02:00 |
|
bl652_dvk
|
spi-device: set CS gpio flags for all devices that had none
|
2020-07-09 06:07:07 -05:00 |
|
bl654_dvk
|
spi-device: set CS gpio flags for all devices that had none
|
2020-07-09 06:07:07 -05:00 |
|
black_f407ve
|
boards: stm32: pinmux: Restore Kconfig control on pinmux (can)
|
2020-05-20 12:09:19 +02:00 |
|
black_f407zg_pro
|
boards: stm32: pinmux: Restore Kconfig control on pinmux (can)
|
2020-05-20 12:09:19 +02:00 |
|
blackpill_f411ce
|
boards: arm: stm32: Add WeAct Black Pill V2.0 definitions
|
2020-07-17 16:54:22 +02:00 |
|
cc26x2r1_launchxl
|
spi-device: set CS gpio flags for all devices that had none
|
2020-07-09 06:07:07 -05:00 |
|
cc1352r1_launchxl
|
spi-device: set CS gpio flags for all devices that had none
|
2020-07-09 06:07:07 -05:00 |
|
cc3220sf_launchxl
|
drivers: cc32xx: use DT_INST_FOREACH to reduce code duplication
|
2020-04-26 06:05:10 -05:00 |
|
cc3235sf_launchxl
|
drivers: cc32xx: use DT_INST_FOREACH to reduce code duplication
|
2020-04-26 06:05:10 -05:00 |
|
circuitdojo_feather_nrf9160
|
boards: arm: nrf: Adding board.c to nRF9160 Feather def
|
2020-07-10 17:56:00 +02:00 |
|
colibri_imx7d_m4
|
boards: arm: Conditionalize pwm pinmuxes on nxp boards
|
2020-05-22 14:56:00 +02:00 |
|
cy8ckit_062_wifi_bt_m0
|
kconfig: Replace defconfig singe-symbol 'if's with 'depends on'
|
2020-02-12 10:32:13 -06:00 |
|
cy8ckit_062_wifi_bt_m4
|
kconfig: Replace defconfig singe-symbol 'if's with 'depends on'
|
2020-02-12 10:32:13 -06:00 |
|
decawave_dwm1001_dev
|
boards: decawave_dwm1001_dev: make button active low
|
2020-07-08 16:10:25 -05:00 |
|
degu_evk
|
boards: dts: nrf: Remove SoC compatible in top-level compatible
|
2020-04-29 08:20:15 -05:00 |
|
disco_l475_iot1
|
drivers: wifi: eswifi: Add chip select flags
|
2020-07-06 08:24:18 -05:00 |
|
dragino_lsn50
|
boards: stm32: pinmux: Restore Kconfig control on pinmux (serial)
|
2020-05-20 12:09:19 +02:00 |
|
efm32gg_stk3701a
|
boards: arm: Fix deprecated "gccarmemb" toolchain references
|
2020-06-10 09:22:03 +02:00 |
|
efm32hg_slstk3400a
|
drivers: gpio_gecko: convert to DT_INST defines
|
2020-03-24 10:14:21 -05:00 |
|
efm32pg_stk3402a
|
boards: arm: Fix deprecated "gccarmemb" toolchain references
|
2020-06-10 09:22:03 +02:00 |
|
efm32wg_stk3800
|
boards: efm32/efr32: Enable MPU on all boards supporting it
|
2020-06-09 10:46:47 +02:00 |
|
efr32_radio
|
spi-device: set CS gpio flags for all devices that had none
|
2020-07-09 06:07:07 -05:00 |
|
efr32mg_sltb004a
|
spi-device: set CS gpio flags for all devices that had none
|
2020-07-09 06:07:07 -05:00 |
|
frdm_k22f
|
boards: arm: Remove OPENSDA_FW cmake variables from nxp boards
|
2020-07-09 07:58:50 -05:00 |
|
frdm_k64f
|
boards: arm: Add troubleshooting section to frdm_k64f doc
|
2020-07-30 12:25:27 +02:00 |
|
frdm_k82f
|
boards: arm: Clean up zephyr-app-commands usage in frdm_k82f board doc
|
2020-07-09 07:58:50 -05:00 |
|
frdm_kl25z
|
boards: arm: Remove OPENSDA_FW cmake variables from nxp boards
|
2020-07-09 07:58:50 -05:00 |
|
frdm_kw41z
|
boards: arm: Remove OPENSDA_FW cmake variables from nxp boards
|
2020-07-09 07:58:50 -05:00 |
|
google_kukui
|
boards: stm32: pinmux: Restore Kconfig control on pinmux (i2c)
|
2020-05-20 12:09:19 +02:00 |
|
hexiwear_k64
|
boards: arm: Remove OPENSDA_FW cmake variables from nxp boards
|
2020-07-09 07:58:50 -05:00 |
|
hexiwear_kw40z
|
boards: arm: Remove OPENSDA_FW cmake variables from nxp boards
|
2020-07-09 07:58:50 -05:00 |
|
holyiot_yj16019
|
boards: fix misleading size for partition
|
2020-05-13 21:25:29 +02:00 |
|
ip_k66f
|
defconfig: Enable RMII_EXT_CLK on ip_k66f board
|
2020-06-10 13:02:22 -05:00 |
|
lpcxpresso11u68
|
boards: arm: add support for lpcxpresso11u68 board
|
2020-07-29 20:12:24 +02:00 |
|
lpcxpresso55s16
|
boards: arm: lpcxpresso55s16: reset soc after loading via jlink
|
2020-07-29 16:38:01 +02:00 |
|
lpcxpresso55s69
|
dts: arm: nxp: nxp_lpc55s6x: Use proper code partition
|
2020-07-15 13:29:50 +02:00 |
|
lpcxpresso54114
|
boards: arm: Remove OPENSDA_FW cmake variables from nxp boards
|
2020-07-09 07:58:50 -05:00 |
|
mec15xxevb_assy6853
|
boards: mec15xxevb_assy6853: use DTS node labels for PWM pinmux
|
2020-07-15 06:14:56 -04:00 |
|
mec1501modular_assy6885
|
boards: mec1501modular_assy6885: Add support for UART0
|
2020-06-28 23:45:27 -04:00 |
|
mec2016evb_assy6797
|
devicetree: remove DT_HAS_NODE_STATUS_OKAY
|
2020-05-13 18:24:42 +02:00 |
|
mikroe_mini_m4_for_stm32
|
boards: stm32: pinmux: Restore Kconfig control on pinmux (pwm)
|
2020-05-20 12:09:19 +02:00 |
|
mimxrt685_evk
|
MXRT600: Add I2C support
|
2020-07-31 08:23:20 -05:00 |
|
mimxrt1010_evk
|
boards: arm: Remove OPENSDA_FW cmake variables from nxp boards
|
2020-07-09 07:58:50 -05:00 |
|
mimxrt1015_evk
|
boards: arm: Remove OPENSDA_FW cmake variables from nxp boards
|
2020-07-09 07:58:50 -05:00 |
|
mimxrt1020_evk
|
dts: remove incorrect use of mmio-sram compatible
|
2020-07-28 07:31:01 -05:00 |
|
mimxrt1050_evk
|
dts: remove incorrect use of mmio-sram compatible
|
2020-07-28 07:31:01 -05:00 |
|
mimxrt1060_evk
|
dts: remove incorrect use of mmio-sram compatible
|
2020-07-28 07:31:01 -05:00 |
|
mimxrt1064_evk
|
dts: remove incorrect use of mmio-sram compatible
|
2020-07-28 07:31:01 -05:00 |
|
mm_swiftio
|
dts: remove incorrect use of mmio-sram compatible
|
2020-07-28 07:31:01 -05:00 |
|
mps2_an385
|
boards: centralize QEMU icount management
|
2020-06-24 20:28:36 -04:00 |
|
mps2_an521
|
boards: centralize QEMU icount management
|
2020-06-24 20:28:36 -04:00 |
|
msp_exp432p401r_launchxl
|
kconfig: Rename CONFIG_FLOAT to CONFIG_FPU
|
2020-04-27 19:03:44 +02:00 |
|
nrf51_ble400
|
spi-device: set CS gpio flags for all devices that had none
|
2020-07-09 06:07:07 -05:00 |
|
nrf51_blenano
|
boards: dts: nrf: Remove SoC compatible in top-level compatible
|
2020-04-29 08:20:15 -05:00 |
|
nrf51_vbluno51
|
boards: dts: nrf: Remove SoC compatible in top-level compatible
|
2020-04-29 08:20:15 -05:00 |
|
nrf51dk_nrf51422
|
boards: nordic: add gpio as supported feature on major dev boards
|
2020-06-09 08:17:19 -04:00 |
|
nrf51dongle_nrf51422
|
boards: dts: nrf: Remove SoC compatible in top-level compatible
|
2020-04-29 08:20:15 -05:00 |
|
nrf52_adafruit_feather
|
drivers: serial: nrf: Remove flow control configuration from kconfig
|
2020-06-09 19:06:16 +02:00 |
|
nrf52_blenano2
|
boards: dts: nrf: Remove SoC compatible in top-level compatible
|
2020-04-29 08:20:15 -05:00 |
|
nrf52_sparkfun
|
boards: dts: nrf: Remove SoC compatible in top-level compatible
|
2020-04-29 08:20:15 -05:00 |
|
nrf52_vbluno52
|
boards: dts: nrf: Remove SoC compatible in top-level compatible
|
2020-04-29 08:20:15 -05:00 |
|
nrf52dk_nrf52810
|
boards: dts: nrf: Remove SoC compatible in top-level compatible
|
2020-04-29 08:20:15 -05:00 |
|
nrf52dk_nrf52832
|
spi-device: set CS gpio flags for all devices that had none
|
2020-07-09 06:07:07 -05:00 |
|
nrf5340dk_nrf5340
|
boards: nrf5340: update help text for BOARD_ENABLE_CPUNET symbol
|
2020-07-23 14:07:16 +02:00 |
|
nrf9160_innblue21
|
dts: remove incorrect use of device_type property
|
2020-07-23 06:37:41 -05:00 |
|
nrf9160_innblue22
|
dts: remove incorrect use of device_type property
|
2020-07-23 06:37:41 -05:00 |
|
nrf9160dk_nrf9160
|
boards: nrf9160dk_nrf9160: Add "spi" as supported feature
|
2020-06-25 19:33:41 +02:00 |
|
nrf9160dk_nrf52840
|
zephyr: replace zephyr integer types with C99 types
|
2020-06-08 08:23:57 -05:00 |
|
nrf52832_mdk
|
boards: arm: nrf: Remove Kconfig PWM_[0-3] usage
|
2020-05-05 08:40:19 -05:00 |
|
nrf52833dk_nrf52820
|
boards: arm: Add Nordic nrf52820 build defines for nrf52833 DK
|
2020-06-15 20:15:42 +02:00 |
|
nrf52833dk_nrf52833
|
spi-device: set CS gpio flags for all devices that had none
|
2020-07-09 06:07:07 -05:00 |
|
nrf52840_blip
|
boards: fix misleading size for partition
|
2020-05-13 21:25:29 +02:00 |
|
nrf52840_mdk
|
boards: fix misleading size for partition
|
2020-05-13 21:25:29 +02:00 |
|
nrf52840_papyr
|
boards: fix misleading size for partition
|
2020-05-13 21:25:29 +02:00 |
|
nrf52840dk_nrf52811
|
boards: arm: nrf: Remove Kconfig PWM_[0-3] usage
|
2020-05-05 08:40:19 -05:00 |
|
nrf52840dk_nrf52840
|
spi-device: set CS gpio flags for all devices that had none
|
2020-07-09 06:07:07 -05:00 |
|
nrf52840dongle_nrf52840
|
doc: nrf52840dongle_nrf52840: fix build instructions for external probes
|
2020-06-09 11:14:31 +02:00 |
|
nucleo_f030r8
|
boards: stm32: pinmux: Restore Kconfig control on pinmux (i2c)
|
2020-05-20 12:09:19 +02:00 |
|
nucleo_f070rb
|
boards: nucleo_f070rb/f303re: fix clock configuration
|
2020-07-05 07:56:21 -04:00 |
|
nucleo_f091rc
|
boards: arm: stm32f091 add rtc feature on the nucleo board
|
2020-07-24 16:16:21 +02:00 |
|
nucleo_f103rb
|
drivers/clock_control: Remove useless CLOCK_STM32_PLL_XTPRE config
|
2020-07-02 08:14:45 -05:00 |
|
nucleo_f207zg
|
drivers/ethernet: stm32: Enable Kconfig symbol ETH_STM32_HAL using dts
|
2020-07-24 12:03:33 +02:00 |
|
nucleo_f302r8
|
boards: stm32: pinmux: Restore Kconfig control on pinmux (adc)
|
2020-05-20 12:09:19 +02:00 |
|
nucleo_f303re
|
boards: nucleo_f070rb/f303re: fix clock configuration
|
2020-07-05 07:56:21 -04:00 |
|
nucleo_f334r8
|
boards: stm32: pinmux: Restore Kconfig control on pinmux (pwm)
|
2020-05-20 12:09:19 +02:00 |
|
nucleo_f401re
|
drivers: pwm: stm32: add support for polarity
|
2020-06-19 15:18:50 +02:00 |
|
nucleo_f411re
|
boards: stm32: pinmux: Restore Kconfig control on pinmux (i2s)
|
2020-05-20 12:09:19 +02:00 |
|
nucleo_f412zg
|
boards: stm32: pinmux: Restore Kconfig control on pinmux (pwm)
|
2020-05-20 12:09:19 +02:00 |
|
nucleo_f413zh
|
boards: stm32: pinmux: Restore Kconfig control on pinmux (pwm)
|
2020-05-20 12:09:19 +02:00 |
|
nucleo_f429zi
|
drivers/ethernet: stm32: Enable Kconfig symbol ETH_STM32_HAL using dts
|
2020-07-24 12:03:33 +02:00 |
|
nucleo_f446re
|
boards: stm32: pinmux: Restore Kconfig control on pinmux (i2c)
|
2020-05-20 12:09:19 +02:00 |
|
nucleo_f746zg
|
drivers/ethernet: stm32: Enable Kconfig symbol ETH_STM32_HAL using dts
|
2020-07-24 12:03:33 +02:00 |
|
nucleo_f756zg
|
drivers/ethernet: stm32: Enable Kconfig symbol ETH_STM32_HAL using dts
|
2020-07-24 12:03:33 +02:00 |
|
nucleo_f767zi
|
drivers/ethernet: stm32: Enable Kconfig symbol ETH_STM32_HAL using dts
|
2020-07-24 12:03:33 +02:00 |
|
nucleo_g071rb
|
boards: stm32: pinmux: Restore Kconfig control on pinmux (serial)
|
2020-05-20 12:09:19 +02:00 |
|
nucleo_g431rb
|
drivers: pwm: stm32: add support for polarity
|
2020-06-19 15:18:50 +02:00 |
|
nucleo_g474re
|
drivers: pwm: stm32: add support for polarity
|
2020-06-19 15:18:50 +02:00 |
|
nucleo_h743zi
|
drivers: pwm: stm32: add support for polarity
|
2020-06-19 15:18:50 +02:00 |
|
nucleo_h745zi_q
|
boards: nucleo_h747: Fix pinmux conditional configuration
|
2020-07-24 12:03:33 +02:00 |
|
nucleo_l4r5zi
|
boards: arm: stm32l4r5 unset the LPTIM clock source if enabled
|
2020-05-29 14:13:05 +02:00 |
|
nucleo_l053r8
|
board: arm: Enable MPU for all STM32 boards supporting it
|
2020-06-19 08:55:44 -05:00 |
|
nucleo_l073rz
|
board: arm: Enable MPU for all STM32 boards supporting it
|
2020-06-19 08:55:44 -05:00 |
|
nucleo_l152re
|
board: arm: Enable MPU for all STM32 boards supporting it
|
2020-06-19 08:55:44 -05:00 |
|
nucleo_l432kc
|
board: arm: Enable MPU for all STM32 boards supporting it
|
2020-06-19 08:55:44 -05:00 |
|
nucleo_l452re
|
boards: arm: l452re_p: initial support for dev board
|
2020-07-30 12:24:05 +02:00 |
|
nucleo_l476rg
|
boards: stm32: pinmux: Restore Kconfig control on pinmux (adc)
|
2020-05-20 12:09:19 +02:00 |
|
nucleo_l496zg
|
drivers: pwm: stm32: add support for polarity
|
2020-06-19 15:18:50 +02:00 |
|
nucleo_l552ze_q
|
boards: stm32: pinmux: Restore Kconfig control on pinmux (serial)
|
2020-05-20 12:09:19 +02:00 |
|
nucleo_wb55rg
|
boards: arm: Fix deprecated "gccarmemb" toolchain references
|
2020-06-10 09:22:03 +02:00 |
|
nuvoton_pfm_m487
|
board: arm: add support for nuvoton pfm m487
|
2020-07-01 21:09:25 +02:00 |
|
olimex_stm32_e407
|
boards: stm32: Enable ethernet devices through device tree
|
2020-07-24 12:03:33 +02:00 |
|
olimex_stm32_h103
|
boards: arm: olimex stm32-h103: Add board
|
2020-07-24 14:48:07 +02:00 |
|
olimex_stm32_h407
|
boards: stm32: pinmux: Restore Kconfig control on pinmux (serial)
|
2020-05-20 12:09:19 +02:00 |
|
olimex_stm32_p405
|
boards: stm32: pinmux: Restore Kconfig control on pinmux (can)
|
2020-05-20 12:09:19 +02:00 |
|
olimexino_stm32
|
drivers/clock_control: Remove useless CLOCK_STM32_PLL_XTPRE config
|
2020-07-02 08:14:45 -05:00 |
|
particle_argon
|
spi-device: set CS gpio flags for all devices that had none
|
2020-07-09 06:07:07 -05:00 |
|
particle_boron
|
spi-device: set CS gpio flags for all devices that had none
|
2020-07-09 06:07:07 -05:00 |
|
particle_xenon
|
spi-device: set CS gpio flags for all devices that had none
|
2020-07-09 06:07:07 -05:00 |
|
pico_pi_m4
|
boards: arm: Conditionalize i2c pinmuxes on nxp boards
|
2020-05-22 14:56:00 +02:00 |
|
qemu_cortex_a53
|
boards: qemu_cortex_a53: do not run on net/bt tests
|
2020-06-25 11:05:29 -04:00 |
|
qemu_cortex_m0
|
boards: arm: qemu_cortex_m0: Removed HFXO request from the timer
|
2020-07-20 16:22:21 +02:00 |
|
qemu_cortex_m3
|
boards: centralize QEMU icount management
|
2020-06-24 20:28:36 -04:00 |
|
qemu_cortex_r5
|
boards: centralize QEMU icount management
|
2020-06-24 20:28:36 -04:00 |
|
reel_board
|
spi-device: set CS gpio flags for all devices that had none
|
2020-07-09 06:07:07 -05:00 |
|
ruuvi_ruuvitag
|
spi-device: set CS gpio flags for all devices that had none
|
2020-07-09 06:07:07 -05:00 |
|
sam4e_xpro
|
boards: arm: sam4e_xpro: Add atmel xplained-pro headers
|
2020-07-13 11:54:29 +02:00 |
|
sam4s_xplained
|
boards: arm: sam4s_xplained: Add atmel xplained headers
|
2020-07-13 11:54:29 +02:00 |
|
sam_e70_xplained
|
devicetree: remove DT_HAS_NODE_STATUS_OKAY
|
2020-05-13 18:24:42 +02:00 |
|
sam_v71_xult
|
boards: arm: sam_v71_xult: Add arduino uno r3 headers
|
2020-07-13 11:54:29 +02:00 |
|
seeeduino_xiao
|
boards: arm: enable BOSSA support on Seeeduino XIAO
|
2020-07-28 07:57:11 -05:00 |
|
sensortile_box
|
spi-device: set CS gpio flags for all devices that had none
|
2020-07-09 06:07:07 -05:00 |
|
steval_fcu001v1
|
boards: stm32: pinmux: Restore Kconfig control on pinmux (pwm)
|
2020-05-20 12:09:19 +02:00 |
|
stm32_min_dev
|
drivers/clock_control: Remove useless CLOCK_STM32_PLL_XTPRE config
|
2020-07-02 08:14:45 -05:00 |
|
stm32f0_disco
|
boards: stm32: pinmux: Restore Kconfig control on pinmux (serial)
|
2020-05-20 12:09:19 +02:00 |
|
stm32f3_disco
|
boards: arm: stm32f3 disco board enables the iwdg
|
2020-06-24 21:00:23 +02:00 |
|
stm32f4_disco
|
boards: stm32: pinmux: Restore Kconfig control on pinmux (can)
|
2020-05-20 12:09:19 +02:00 |
|
stm32f030_demo
|
boards: stm32f030_demo: enable stm32flash in addition to OpenOCD
|
2020-07-02 07:18:33 -05:00 |
|
stm32f072_eval
|
boards: stm32: pinmux: Restore Kconfig control on pinmux (serial)
|
2020-05-20 12:09:19 +02:00 |
|
stm32f072b_disco
|
boards: stm32: pinmux: Restore Kconfig control on pinmux (can)
|
2020-05-20 12:09:19 +02:00 |
|
stm32f411e_disco
|
boards: stm32f411e_disco: add USB device support to stm32f411e_disco
|
2020-06-23 13:07:49 +02:00 |
|
stm32f412g_disco
|
boards: stm32: pinmux: Restore Kconfig control on pinmux (serial)
|
2020-05-20 12:09:19 +02:00 |
|
stm32f429i_disc1
|
spi-device: set CS gpio flags for all devices that had none
|
2020-07-09 06:07:07 -05:00 |
|
stm32f469i_disco
|
boards: stm32: pinmux: Restore Kconfig control on pinmux (i2c)
|
2020-05-20 12:09:19 +02:00 |
|
stm32f723e_disco
|
board: arm: Enable MPU for all STM32 boards supporting it
|
2020-06-19 08:55:44 -05:00 |
|
stm32f746g_disco
|
drivers/ethernet: stm32: Enable Kconfig symbol ETH_STM32_HAL using dts
|
2020-07-24 12:03:33 +02:00 |
|
stm32f769i_disco
|
drivers/ethernet: stm32: Enable Kconfig symbol ETH_STM32_HAL using dts
|
2020-07-24 12:03:33 +02:00 |
|
stm32g0316_disco
|
boards: stm32: pinmux: Restore Kconfig control on pinmux (serial)
|
2020-05-20 12:09:19 +02:00 |
|
stm32h747i_disco
|
board: arm: Enable MPU for all STM32 boards supporting it
|
2020-06-19 08:55:44 -05:00 |
|
stm32l1_disco
|
boards: stm32: pinmux: Restore Kconfig control on pinmux (i2c)
|
2020-05-20 12:09:19 +02:00 |
|
stm32l476g_disco
|
board: arm: Enable MPU for all STM32 boards supporting it
|
2020-06-19 08:55:44 -05:00 |
|
stm32l496g_disco
|
board: arm: Enable MPU for all STM32 boards supporting it
|
2020-06-19 08:55:44 -05:00 |
|
stm32mp157c_dk2
|
board: arm: Enable MPU for all STM32 boards supporting it
|
2020-06-19 08:55:44 -05:00 |
|
stm32vl_disco
|
board: arm: Enable MPU for all STM32 boards supporting it
|
2020-06-19 08:55:44 -05:00 |
|
stm3210c_eval
|
boards: stm32: pinmux: Restore Kconfig control on pinmux (serial)
|
2020-05-20 12:09:19 +02:00 |
|
stm32373c_eval
|
board: arm: Enable MPU for all STM32 boards supporting it
|
2020-06-19 08:55:44 -05:00 |
|
thingy52_nrf52832
|
zephyr: replace zephyr integer types with C99 types
|
2020-06-08 08:23:57 -05:00 |
|
twr_ke18f
|
boards: arm: twr_ke18f: enable edma
|
2020-07-21 08:56:51 -05:00 |
|
twr_kv58f220m
|
boards: arm: Remove OPENSDA_FW cmake variables from nxp boards
|
2020-07-09 07:58:50 -05:00 |
|
udoo_neo_full_m4
|
boards: arm: Conditionalize serial pinmuxes on nxp boards
|
2020-05-22 14:56:00 +02:00 |
|
usb_kw24d512
|
boards: arm: Conditionalize spi pinmuxes on nxp boards
|
2020-05-22 14:56:00 +02:00 |
|
v2m_beetle
|
zephyr: replace zephyr integer types with C99 types
|
2020-06-08 08:23:57 -05:00 |
|
v2m_musca
|
zephyr: replace zephyr integer types with C99 types
|
2020-06-08 08:23:57 -05:00 |
|
v2m_musca_b1
|
zephyr: replace zephyr integer types with C99 types
|
2020-06-08 08:23:57 -05:00 |
|
warp7_m4
|
boards: arm: Conditionalize i2c pinmuxes on nxp boards
|
2020-05-22 14:56:00 +02:00 |
|
waveshare_open103z
|
boards: waveshare_open103z: remove unused Kconfig
|
2020-07-02 10:55:07 -04:00 |
|
xmc45_relax_kit
|
boards: arm: xmc45_relax_kit: minor doc fixes
|
2020-06-02 15:14:45 +02:00 |
|
index.rst
|
doc: fix sidebar nav issues with board docs
|
2017-06-27 19:21:29 -04:00 |
209084e745