patrick/zephyr
1
0
Fork 0
Code Issues Pull requests Actions 8 Packages Projects Releases Wiki Activity
zephyr/drivers/sdhc/CMakeLists.txt

16 lines
671 B
CMake
Raw Normal View History

drivers: sdhc: add SD SPI mode host controller driver Add SDHC driver implementing spi mode support for SD cards. This driver implements the standard SD host controller APIs, and sets the host property "is_spi" to indicate to the SD subsystem the card will be running in SPI mode. Signed-off-by: Daniel DeGrasse <daniel.degrasse@nxp.com>
2022-04-01 22:27:08 +02:00
# Copyright 2022 NXP
drivers: sdhc: Implement NXP USDHC SDHC driver Implement SDHC driver for NXP USDHC peripheral, supporting all api calls available in the sdhc driver. This implementation leverages NXP's HAL, and simply implements a shim layer over the HAL itself. Signed-off-by: Daniel DeGrasse <daniel.degrasse@nxp.com>
2022-02-16 20:53:54 +01:00
# SPDX-License-Identifier: Apache-2.0
if (CONFIG_SDHC)
zephyr_library()
zephyr_library_sources_ifdef(CONFIG_IMX_USDHC imx_usdhc.c)
drivers: sdhc: add SD SPI mode host controller driver Add SDHC driver implementing spi mode support for SD cards. This driver implements the standard SD host controller APIs, and sets the host property "is_spi" to indicate to the SD subsystem the card will be running in SPI mode. Signed-off-by: Daniel DeGrasse <daniel.degrasse@nxp.com>
2022-04-01 22:27:08 +02:00
zephyr_library_sources_ifdef(CONFIG_SPI_SDHC sdhc_spi.c)
drivers: sdhc: add SD host controller driver for LPC SDIF add SD host controller driver for LPC SDIF IP block, using NXP SDIF HAL driver. Signed-off-by: Daniel DeGrasse <daniel.degrasse@nxp.com>
2022-05-07 01:22:46 +02:00
zephyr_library_sources_ifdef(CONFIG_MCUX_SDIF mcux_sdif.c)
drivers: sdhc: add support of Renesas MMC driver Add basic functionality of Renesas SD/MMC driver. It can be used for both gen3 and gen4 R-car boards, but tested only with H3ULCB, Salvator XS M3 and Spider boards. This driver working with SDHC subsystem. The driver supports regularal reading/writing throught SD/MMC controller buffer, DMA mode w/o interrupts and timing tuning. Add gpio5 and sd0 nodes to h3ulcb and salvator xs which are needed for working with SD cards. The GPIO node is needed for switching voltage on SD card through gpio regulator driver. Notes: * the driver doesn't support SPI mode; * SCC tuning and DMA mode based on IRQs are enabled by default; * an address of a data buffer has to be aligned to 128 bytes if it is not, driver will use non-DMA mode automatically; * Renesas MMC DMAC doesn't support 64-bit DMA addresses, so for case when we have 64-bit xref data address we use non-DMA mode; * SD/MMC controller supports block size between 512 and 1 with a lot of restrictions, more details you can find in code; * support of HS400 mode isn't implemented inside driver. Signed-off-by: Mykola Kvach <mykola_kvach@epam.com>
2023-07-12 08:53:03 +02:00
zephyr_library_sources_ifdef(CONFIG_RCAR_MMC rcar_mmc.c)
driver: sdhc: added atmel SAM4E hsmci driver This commit adds support for the ATMEL HSMCI peripheral for the SAM4E MCU series, enabling native SD card support. Signed-off-by: Vincent van Beveren <v.van.beveren@nikhef.nl>
2023-05-24 13:49:27 +02:00
zephyr_library_sources_ifdef(CONFIG_SAM_HSMCI sam_hsmci.c)
drivers: sdhc: add driver support for emmc host controller add host controller driver support for emmc version 5.1. The driver expose zephyr sdhc api interface for emmc host controller. Signed-off-by: Najumon B.A <najumon.ba@intel.com>
2023-08-03 11:16:54 +02:00
zephyr_library_sources_ifdef(CONFIG_INTEL_EMMC_HOST intel_emmc_host.c)
drivers: sdhc: added Infineon CAT1 SDHC/SDIO driver Added initial version of Infineon CAT1 SDHC/SDIO driver Added initial version of binding file for Infineon CAT1 SDHC/SDIO driver Signed-off-by: Nazar Palamar <nazar.palamar@infineon.com>
2023-06-20 13:45:39 +02:00
zephyr_library_sources_ifdef(CONFIG_SDHC_INFINEON_CAT1 ifx_cat1_sdio.c)
drivers: sdhc: add cdns sdhc/combophy driver files Add SDHC driver files with new SD framework changes SDHC driver includes combophy configurations. Added mmc binding yaml file Signed-off-by: Murlidhar Roy <murlidhar.roy@intel.com>
2023-10-17 08:41:17 +02:00
zephyr_library_sources_ifdef(CONFIG_CDNS_SDHC sdhc_cdns_ll.c sdhc_cdns.c)
drivers: esp32: SDHC implementation Implementation of SDHC driver for ESP32 Signed-off-by: Raffael Rostagno <raffael.rostagno@espressif.com>
2024-03-01 12:54:32 +01:00
zephyr_library_sources_ifdef(CONFIG_SDHC_ESP32 sdhc_esp32.c)
drivers: sdhc: Implement NXP USDHC SDHC driver Implement SDHC driver for NXP USDHC peripheral, supporting all api calls available in the sdhc driver. This implementation leverages NXP's HAL, and simply implements a shim layer over the HAL itself. Signed-off-by: Daniel DeGrasse <daniel.degrasse@nxp.com>
2022-02-16 20:53:54 +01:00
endif()
Reference in a new issue Copy permalink