IPM drivers are commonly used to send notifications/cause interrupts
without any transfer of data. To add this use case in the ESP32 IPM
driver, the guard statement is appended so that the pointer to the
data buffer is allowed to be zero only if the size of the data to be
transferred is zero. If size is given as 0 and data is equal to NULL,
we are thus only using the IPM as a doorbell, not to transfer data.
Signed-off-by: Celina Sophie Kalus <hello@celinakalus.de>
SOC_ESP32_NET is now SOC_ESP32_APPCPU, following espressif's
naming convention in the same manner as ESP32S3 app cpu.
SOC_ESP32_APPCU is now a subset of SOC_SERIES_ESP32.
This commit also changes the necessary files, samples and tests
for bisect purposes.
Signed-off-by: Lucas Tamborrino <lucas.tamborrino@espressif.com>
Remove CONFIG_IPM_IMX_REV2, as this Kconfig is no longer needed. The
driver can now be enabled with CONFIG_IPM_IMX.
Update NXP HAL to remove this Kconfig as well.
Signed-off-by: Daniel DeGrasse <daniel.degrasse@nxp.com>
Remove nxp,imx-mu-rev2 compatible. This IP block is the same as the
nxp,imx-mu device, and should be handled by the same compatible
Instead, use CONFIG_HAS_MCUX to determine which HAL APIs should be used
to interact with the messaging unit IP.
Signed-off-by: Daniel DeGrasse <daniel.degrasse@nxp.com>
Move the syscall_handler.h header, used internally only to a dedicated
internal folder that should not be used outside of Zephyr.
Signed-off-by: Anas Nashif <anas.nashif@intel.com>
A buffer overflow happens in send() when size is negative because
it is promoted to signed when used in memcpy.
Signed-off-by: Flavio Ceolin <flavio.ceolin@intel.com>
Since the driver is passing the whole buffer, let's zero it to avoid
pass garbage in case of size != buffer's size.
Signed-off-by: Flavio Ceolin <flavio.ceolin@intel.com>
It is possible to happen a buffer overflow in ipm_send due the lack
of a checking for negative value.
Signed-off-by: Flavio Ceolin <flavio.ceolin@intel.com>
Since the driver is passing the whole buffer, let's zero it to avoid
pass garbage in case of size != buffer's size.
Signed-off-by: Flavio Ceolin <flavio.ceolin@intel.com>
It is possible to happen a buffer overflow in ipm_send callback
due a wrong comparison between signed/unsigned types.
Signed-off-by: Flavio Ceolin <flavio.ceolin@intel.com>
Send a fw ready reply message as soon as possible.
This is usually used on host side which is waiting
for this message in order to establish the
communication with the remote processor - see
imx_dsp_rproc driver from Linux.
This can be enabled by IPM_IMX_FW_READY_REPLY config,
which is by default N.
Set CONFIG_IPM_IMX_FW_READY_REPLY as Y for
openamp_rsc_table sample, running on nxp_adsp_imx8m.
Signed-off-by: Iuliana Prodan <iuliana.prodan@nxp.com>
The ipm_cavs_idc driver was used with the old intel_s1000
board which has been removed. On the audio DSP side,
the IDC under CAVS is being handled by SoC layer code.
Now the ipm_cavs_idc is not needed anymore for anything.
So remove it.
Signed-off-by: Daniel Leung <daniel.leung@intel.com>
Remove redundant function during child node initialization.
Move log related header file near log related macro.
Signed-off-by: Tanmay Shah <tanmay.shah@amd.com>
Add ipm driver to use Inter Processor Interrupts
on Xilinx ZynqMP platform. This patch also adds sample
application that shows use of xlnx ipm driver.
This driver uses default arm gic interrupt controller
and works only for lockstep mode of cortex-r5f
cluster for now.
In split mode the cortex-r5 cluster will
have two r5f cores and they are expected to work in AMP
mode. If both r5f cores run simultaneouly, only one of
the core is able to receive IPI interrupts at this time
and it will be the one that started later. In future
this limitation shall be removed.
Signed-off-by: Tanmay Shah <tanmay.shah@amd.com>
This driver is built on top of the IVSHMEM doorbell
notification mechanism providing an unified way
to generate inter VM interrupts.
Signed-off-by: Felipe Neves <felipe.neves@linaro.org>
When CONFIG_PM_DEVICE is enabled IPC Device may be during power transition
during a call to intel_adsp_ipc_send_message function.
Changed signatures of intel_adsp_ipc_send_message and its sync version
to return int and negative error codes on error.
On attempt to send IPC message during Device power transition
-ESHUTDOWN error code is returned, on busy state -EBUSY.
Updated all function references.
Signed-off-by: Andrey Borisovich <andrey.borisovich@intel.com>
This adds a few line use zephyr_syscall_header() to include
headers containing syscall function prototypes.
Signed-off-by: Daniel Leung <daniel.leung@intel.com>
The init infrastructure, found in `init.h`, is currently used by:
- `SYS_INIT`: to call functions before `main`
- `DEVICE_*`: to initialize devices
They are all sorted according to an initialization level + a priority.
`SYS_INIT` calls are really orthogonal to devices, however, the required
function signature requires a `const struct device *dev` as a first
argument. The only reason for that is because the same init machinery is
used by devices, so we have something like:
```c
struct init_entry {
int (*init)(const struct device *dev);
/* only set by DEVICE_*, otherwise NULL */
const struct device *dev;
}
```
As a result, we end up with such weird/ugly pattern:
```c
static int my_init(const struct device *dev)
{
/* always NULL! add ARG_UNUSED to avoid compiler warning */
ARG_UNUSED(dev);
...
}
```
This is really a result of poor internals isolation. This patch proposes
a to make init entries more flexible so that they can accept sytem
initialization calls like this:
```c
static int my_init(void)
{
...
}
```
This is achieved using a union:
```c
union init_function {
/* for SYS_INIT, used when init_entry.dev == NULL */
int (*sys)(void);
/* for DEVICE*, used when init_entry.dev != NULL */
int (*dev)(const struct device *dev);
};
struct init_entry {
/* stores init function (either for SYS_INIT or DEVICE*)
union init_function init_fn;
/* stores device pointer for DEVICE*, NULL for SYS_INIT. Allows
* to know which union entry to call.
*/
const struct device *dev;
}
```
This solution **does not increase ROM usage**, and allows to offer clean
public APIs for both SYS_INIT and DEVICE*. Note that however, init
machinery keeps a coupling with devices.
**NOTE**: This is a breaking change! All `SYS_INIT` functions will need
to be converted to the new signature. See the script offered in the
following commit.
Signed-off-by: Gerard Marull-Paretas <gerard.marull@nordicsemi.no>
init: convert SYS_INIT functions to the new signature
Conversion scripted using scripts/utils/migrate_sys_init.py.
Signed-off-by: Gerard Marull-Paretas <gerard.marull@nordicsemi.no>
manifest: update projects for SYS_INIT changes
Update modules with updated SYS_INIT calls:
- hal_ti
- lvgl
- sof
- TraceRecorderSource
Signed-off-by: Gerard Marull-Paretas <gerard.marull@nordicsemi.no>
tests: devicetree: devices: adjust test
Adjust test according to the recently introduced SYS_INIT
infrastructure.
Signed-off-by: Gerard Marull-Paretas <gerard.marull@nordicsemi.no>
tests: kernel: threads: adjust SYS_INIT call
Adjust to the new signature: int (*init_fn)(void);
Signed-off-by: Gerard Marull-Paretas <gerard.marull@nordicsemi.no>
Unify the drivers/*/Kconfig menuconfig title strings to the format
"<class> [(acronym)] [bus] drivers".
Including both the full name of the driver class and an acronym makes
menuconfig more user friendly as some of the acronyms are less well-known
than others. It also improves Kconfig search, both via menuconfig and via
the generated Kconfig documentation.
Signed-off-by: Henrik Brix Andersen <hebad@vestas.com>
Clean up occurrences of "#if IS_ENABLED(CONFIG_FOO)" an replace
with classical "#if defined(CONFIG_FOO)".
Signed-off-by: Erwan Gouriou <erwan.gouriou@linaro.org>
Update IPM drivers to use DT_HAS_<compat>_ENABLED Kconfig symbol
to expose the driver and enable it by default based on devicetree.
We remove 'depend on' Kconfig for symbols that would be implied by
the devicetree node existing.
Signed-off-by: Kumar Gala <kumar.gala@intel.com>
Change for loops of the form:
for (i = 0; i < CONFIG_MP_NUM_CPUS; i++)
...
to
unsigned int num_cpus = arch_num_cpus();
for (i = 0; i < num_cpus; i++)
...
We do the call outside of the for loop so that it only happens once,
rather than on every iteration.
Signed-off-by: Kumar Gala <kumar.gala@intel.com>
The TXF interrupt mask is not properly set. In this case the
interrupt line is not cleaned, leading to the re-entrance
in the interrupt handler.
the issue is linked to the management of the IPCC_CxTOCySR value.
The TXF interrupt is triggered when the IPCC_CyMR is channel bit is
set to 0 and the IPCC_CxTOCySR associated bit move from 1 to 0.
The fix is to check if the IPCC_CxTOCySR channel bit is 0 instead of 1.
Signed-off-by: Arnaud Pouliquen <arnaud.pouliquen@foss.st.com>
Change automated searching for files using "IRQ_CONNECT()" API not
including <zephyr/irq.h>.
Signed-off-by: Gerard Marull-Paretas <gerard.marull@nordicsemi.no>
Changes to code:
1. Renamed CAVS_IPC API from common/include/cavs_ipc.h to
common/include/intel_adsp_ipc.h. Renamed all API functions and structs -
added "intel_adsp_" prefix.
2. Moved definitions from intel-ipc-regs.h and ace-ipc-regs.g to SOC
specific headers include/<soc_name>/adsp_ipc_regs.h.
3. Added new common intel_adsp_ipc_devtree.h header with new
macros to retrieve IPC and IDC nodes and register addresses.
Put those new macros in code replacing hardcoded values outside of
devicetree.
4. Changed documentation of IDC and renamed IDC register struct
to have common name between all intel adsp socs.
5. Removed excessive docs description on cAVS IPC protocol.
Changes to Devicetree:
1. Renamed in all CAVS boards .dtsi files content in IPC nodes:
- "cavs_host_ipc" node labels to "adsp_ipc" labels.
- compatible "intel,cavs-host-ipc" renamed to
"intel,adsp-host-ipc".
2. Added (previously missing) yaml file for "intel,adsp-host-ipc"
compatible.
3. Renamed in all CAVS boards .dtsi files content in IDC nodes:
- "idc" node labels to "adsp_idc" labels.
- compatible "intel,cavs-idc" renamed to "intel-adsp-idc"
4. Renamed intel,cavs_idc.yaml file to intel,adsp_idc.yaml
so it is suitable for both CAVS and ACE SoC family.
Moved it from ipm bindings to ipc bindings where it belongs.
Changes to Kconfig:
1. Renamed existing Kconfig option CONFIG_CAVS_IPC to
INTEL_ADSP_IPC.
2. For renamed INTEL_ADSP_IPC addded default value based on
status of the "adsp-ipc" and "adsp-ipc" node.
Signed-off-by: Andrey Borisovich <andrey.borisovich@intel.com>
Many device pointers are initialized at compile and never changed. This
means that the device pointer can be constified (immutable).
Automated using:
```
perl -i -pe 's/const struct device \*(?!const)(.*)= DEVICE/const struct
device *const $1= DEVICE/g' **/*.c
```
Signed-off-by: Gerard Marull-Paretas <gerard.marull@nordicsemi.no>
Intel ADSP CAVS is now a proper series with all CAVS SoCs running under
it. This will give us to Intel ADSP series:
- CAVS
- ACE v1.x
Signed-off-by: Anas Nashif <anas.nashif@intel.com>
