Source code of board/m5stack/m5stickc_plus and
board/m5stack/m5stack_atoms3_lite were adapted for an inital
support of the M5Stack ATOM Lite board.
Signed-off-by: Nikola Trifunovic <nikola@trifunovic.at>
In future versions of Linkserver, specifying the core argument within
the device string will not be supported. Therefore, move the FRDM
MCXN947 board to specify the core directly instead of using the device
string.
Signed-off-by: Daniel DeGrasse <daniel.degrasse@nxp.com>
- fix schematic link pointing to different board
- fix link to the board_defconfig file
- remove the "Debug Firmware" link that was not referenced anywhere
- add a link to the board user manual
- minor additions to the debug with J-Link section
Signed-off-by: Thomas Stranger <thomas.stranger@outlook.com>
Create regulator on GPIO for microphone supply
Set pdm data and clk pins in pinctrl
Add xiao_ble_sense overlay for dmic sample support
Signed-off-by: Zak Portnoy <zakportnoy@gmail.com>
Enable DMIC on RW612 BGA board. The DMIC is enabled for both onboard
MEMS microphones for this board, and the board is enabled with the DMIC
sample and test
Signed-off-by: Daniel DeGrasse <daniel.degrasse@nxp.com>
Set the PLL1_Q divider to 6 give a can core clock of 80MHz to
resolve fdcan_clk reception problem because M_CAN requires that
the host clock "APB1" should be higher or equal to the CAN core
clock "PLL1_Q".
Signed-off-by: IBEN EL HADJ MESSAOUD Marwa <marwa.ibenelhadjmessaoud-ext@st.com>
Add necessary overlay and stm32h573i_dk in i2c_target_api test case
to enable the board.
Signed-off-by: IBEN EL HADJ MESSAOUD Marwa <marwa.ibenelhadjmessaoud-ext@st.com>
The SOC name for the `imx8ulp_evk` board has been changed
to `mimx8ud7`. As such, update `deprecated.cmake` to reflect
this change.
Signed-off-by: Laurentiu Mihalcea <laurentiu.mihalcea@nxp.com>
The SOC name `imx8ulp` has been just a placeholder until
support for the SOC's ADSP (since this is the only core
that's supported in Zephyr) could be added to the NXP HAL.
Now that the support has been added, to make use of it, the
SOC name `imx8ulp` has to be changed to `mimx8ud7`. As such,
this commit does the following:
1) Introduces SOC part number configuration - needed
by some HAL headers.
2) Replaces all occurrences of `imx8ulp` (as the SOC
name) with `mimx8ud7`.
3) Enables `CONFIG_HAS_MCUX`.
4) Aligns all `CONFIG_SOC_` configurations with the
new SOC name.
5) Updates SOF hash. This is needed to fix build issues
caused by this name change. This is not done in a separate
commit to preserve bisectability.
Signed-off-by: Laurentiu Mihalcea <laurentiu.mihalcea@nxp.com>
This commit should fix configuration conflicts that
came up upon merging both MIPI DBI and display panel
drivers.
1. Board's display/LVGL Kconfigs should be enabled when
needed based on the selected display interface.
2. Overwrite the touch controller's I2C pins to avoid
conflicts with the display panel signals.
Signed-off-by: Ioannis Karachalios <ioannis.karachalios.px@renesas.com>
To use this functionality one must now use the native_sim//64
(variant) version. The old hwmv1 compatible name for the board
was left provisionally while all tests in tree were ported.
That being now done, this old name can be removed.
After this change one cannot build anymore
targeting native_sim_64, but must instead build
targeting native_sim/[native]/64.
For twister tests the old name is already not valid.
Signed-off-by: Alberto Escolar Piedras <alberto.escolar.piedras@nordicsemi.no>
To use this functionality one must now use the native_posix//64
(variant) version. The old hwmv1 compatible name for the board
was left provisionally while all tests in tree were ported.
That being now done, this old name can be removed.
After this change one cannot build anymore
targeting native_posix_64, but must instead build
targeting native_posix/[native]/64.
For twister tests the old name is already not valid.
Signed-off-by: Alberto Escolar Piedras <alberto.escolar.piedras@nordicsemi.no>
Add devicetree node for the accompanying, ssd1306-based display board
connected to connector P4.
Signed-off-by: Henrik Brix Andersen <henrik@brixandersen.dk>
Correct a few issues with the documentation that were causing rendering
issues, as well as the following changes:
- added blurb to debug section clarifying that the default debugger
firmware supports LinkServer
- updated serial terminal output with board name given when building
with HWMv2
Signed-off-by: Daniel DeGrasse <daniel.degrasse@nxp.com>
By default, LinkServer's memory map for the MCXN947 does not define
memory regions for the SRAM or peripheral bus in secure mode. This
results in gdb failing to read from these memory regions unless
explicitly told ignore the debugger memory map via
"set mem inaccessible-by-default off".
To resolve this, define memory regions for SRAM and peripherals in
secure mode via the commandline arguments passed to LinkServer in
board.cmake.
Signed-off-by: Daniel DeGrasse <daniel.degrasse@nxp.com>
To use this functionality one must now use the hwmv2 naming
(nrf5340bsim/nrf5340/cpu{app,net}).
The old hwmv1 compatible names for these targets,
were left provisionally while all tests in tree were ported.
That being now done, these old names can be removed.
After this change one cannot build anymore
targeting nrf5340bsim_nrf5340_cpu{app,net}
but must instead build targeting
nrf5340bsim/nrf5340/cpu{app,net}
For twister tests the old name were already not valid.
Signed-off-by: Alberto Escolar Piedras <alberto.escolar.piedras@nordicsemi.no>
This patch fixes a broken link in the docs for the
nrf9151dk.
It points to the SiP's product page for now.
Signed-off-by: Maximilian Deubel <maximilian.deubel@nordicsemi.no>
Update Kconfig to improve LVGL Demo performance.
- enable ICache, DCache, and cache management.
- enable Chrom-ART.
- enable double frame buffer and full refresh.
- set bits per pixel to 16.
Signed-off-by: Charles Dias <charlesdias.cd@outlook.com>
Sphinx reference used cypress instead of infineon. This causes build
warnings, as the same tag is part of boards/cypress/index.rst.
Signed-off-by: Gerard Marull-Paretas <gerard@teslabs.com>
The SparkFun Pro Micro RP2040 board has an WS2812-style RGB LED connected
to a GPIO pin. Add this to the devicetree so that this device can be used.
Signed-off-by: David Brown <david.brown@linaro.org>
Document offloaded sockets driver, which is an alternative to Ethernet
driver for networking applications.
Signed-off-by: Marcin Niestroj <m.niestroj@emb.dev>
Co-authored-by: Alberto Escolar Piedras <alberto.escolar.piedras@nordicsemi.no>
Use NSI_HW_EVENT() in order to periodically check for events in host
sockets. Whenever there is a socket event ready to be processed by Zephyr,
raise native_sim (newly introduced) CPU interrupt, so that Zephyr driver
can signal readiness with k_poll().
Maintain a list of Zephyr poll() executions in Zephyr context. Iterate
through them whenever there is some event to be processed.
Signed-off-by: Marcin Niestroj <m.niestroj@emb.dev>
regression.sh path is now tfm/api_ns/regression.sh, reflect it in the
doc.
Remove duplicate TF-M material.
Signed-off-by: Erwan Gouriou <erwan.gouriou@st.com>
Rather than providing flash partitions in samples, provide default
partition (no tests) as part of the board ns variant default configuration.
Update or remove related overlays.
Update ns variant yaml file to specify actual flash available for the
ns application (36K).
Additionaly, fix comment in b_u585i_iot02a_ns.
Signed-off-by: Erwan Gouriou <erwan.gouriou@st.com>
Clean up early days TF-M development directives which are outdated today.
Factorize remaining CMake instructions in soc.
Signed-off-by: Erwan Gouriou <erwan.gouriou@st.com>
Removes instances of setting CONFIG_BOARD that should have been
removed in the hwmv2 porting process
Signed-off-by: Jamie McCrae <jamie.mccrae@nordicsemi.no>
Replaces inaccurate or wrong vendor prefixes in board and soc
folder names with those from thr vendor prefix file
Signed-off-by: Jamie McCrae <jamie.mccrae@nordicsemi.no>
Adds the user-provided board qualifiers to Kconfig so it can be
used by application code, along with one containing the full string
Signed-off-by: Jamie McCrae <jamie.mccrae@nordicsemi.no>
Followup: #69905
Adopting new board terminology for CMake, python, and Kconfig code to
use qualifiers instead of identifiers.
Also adjusted to board target where applicable.
Signed-off-by: Torsten Rasmussen <Torsten.Rasmussen@nordicsemi.no>
Move the Kconfig symbols SOC_ESP32_PROCPU, SOC_ESP32_APPCPU,
SOC_ESP32S3_PROCPU, and SOC_ESP32S3_APPCPU.
The CPU cluster is defined in espessifc/soc.yml and should therefore
be available in the HWMv2 Kconfig.soc tree.
This will allow sysbuild to test for the CPU cluster when targeting
remote board for a build.
Update espressif boards accordingly.
Signed-off-by: Torsten Rasmussen <Torsten.Rasmussen@nordicsemi.no>
