Extend Kconfig definitions and nrfx_config translations so that UARTE
instances that are available in nRF54H20 can be used.
Signed-off-by: Andrzej Głąbek <andrzej.glabek@nordicsemi.no>
On nRF54H20, only the new shim can be used and the enhanced poll out
cannot be enabled since there is no DPPI support for this SoC yet.
Signed-off-by: Andrzej Głąbek <andrzej.glabek@nordicsemi.no>
New shim takes more flash and is causing some tests to overflow the
ROM memory. Switching to the legacy shim as default until it is fixed.
Signed-off-by: Krzysztof Chruściński <krzysztof.chruscinski@nordicsemi.no>
Add new shim which is based on nrfx driver.
Legacy shim is kept for transition period. It can be used after
setting CONFIG_UART_NRFX_UARTE_LEGACY_SHIM.
Signed-off-by: Krzysztof Chruściński <krzysztof.chruscinski@nordicsemi.no>
Rework Kconfig to improve handling of multiple UART instances by
using Kconfig template file.
Signed-off-by: Krzysztof Chruściński <krzysztof.chruscinski@nordicsemi.no>
Drivers for nRF SoCs using pinctrl did not select PINCTRL. This means
boards are forced to enable PINCTRL.
Signed-off-by: Gerard Marull-Paretas <gerard@teslabs.com>
- use CONFIG_HAS_HW_NRF_* symbols consistently in nRF multi-instance
drivers when creating particular driver instances
- remove unnecessary hidden Kconfig options that indicated the type of
peripheral to be used by a given instance (e.g. SPI, SPIM, or SPIS)
and enabled proper nrfx driver instance; instead, use one option per
peripheral type and include the corresponding shim driver flavor into
compilation basing on that option (not the one that enables the nrfx
driver as it was incorrectly done so far in some cases)
Signed-off-by: Andrzej Głąbek <andrzej.glabek@nordicsemi.no>
This effectively reverts the following three commits:
- 0f9f18843f
- 6812441099
- 326f7bd450
and also the changes that got copied to the nrf5340_audio_dk_nrf5340
board.
The workaround brings more harm than good. It already required many
tweaks in various tests to make them pass (because it introduced
a significant overhead in processing of the console UART interrupt)
and now it makes the I2S driver tests to fail. It's not reasonable
to add more tweaks in Zephyr tests just to keep this workaround in
the tree. Instead the root cause should be fixed (if the original
problem still occurs).
Signed-off-by: Andrzej Głąbek <andrzej.glabek@nordicsemi.no>
Add workaround for development kits on which interface chip (segger chip)
is dropping bytes when they are sent in bursts. Issue has been seen on
DK which have multiple virtual com ports on the USB.
A workaround is adding periodic busy waits to introduce gaps in the
transmission.
Signed-off-by: Krzysztof Chruscinski <krzysztof.chruscinski@nordicsemi.no>
Update serial drivers to use DT_HAS_<compat>_ENABLED Kconfig symbol
to expose the driver and enable it by default based on devicetree.
We remove 'depend on' Kconfig for symbols that would be implied by
the devicetree node existing.
Signed-off-by: Kumar Gala <galak@kernel.org>
Instead of selecting appropriate HAS_HW_NRF_* options for particular
nRF SoCs (and simulated nRF52 target), set their values basing on
information from devicetree.
Correct also semantics of those options so that they are set only when
a corresponding DT node is enabled. This allows using them directly in
Kconfig dependencies of Zephyr drivers for nRF peripherals. Update
appropriately these dependencies.
Signed-off-by: Andrzej Głąbek <andrzej.glabek@nordicsemi.no>
According to Kconfig guidelines, boolean prompts must not start with
"Enable...". The following command has been used to automate the changes
in this patch:
sed -i "s/bool \"[Ee]nables\? \(\w\)/bool \"\U\1/g" **/Kconfig*
Signed-off-by: Gerard Marull-Paretas <gerard.marull@nordicsemi.no>
UARTE does not support RO TX buffers. Added cache buffer to the
driver which is used when provided buffer is not from RAM.
Signed-off-by: Krzysztof Chruscinski <krzysztof.chruscinski@nordicsemi.no>
Avoid calling PPI driver when enhanced poll functionality is
disabled. Fixing a case when driver failed to compile when
enhanced poll is disabled for all instances.
Signed-off-by: Krzysztof Chruscinski <krzysztof.chruscinski@nordicsemi.no>
Lowest power consumption can be achieved when uarte peripheral
is disabled when not used. In low power mode, need for both
directions is tracked and if both are no in use peripheral is
disabled. TX disabling is instant but RX requires flushing RX
fifo because data in hardware fifo is lost when peripheral is
re-enabled.
Signed-off-by: Krzysztof Chruscinski <krzysztof.chruscinski@nordicsemi.no>
- Remove SYS_ prefix
- shorten POWER_MANAGEMENT to just PM
- DEVICE_POWER_MANAGEMENT -> PM_DEVICE
and use PM_ as the prefix for all PM related Kconfigs
Signed-off-by: Anas Nashif <anas.nashif@intel.com>
Refactoring poll_out to be ready for handling preemption. uart_tx and
uart_fifo_fill modified so they are resilient to being preempted by
uart_poll_out.
Refactored uart_poll_out implementation to be common for interrupt
driven API and asynchronous API. In both APIs active state is detected
by evaluating state of ENDTX and TXSTOPPED events. If anyone is set it
means that new transfer can be started.
Patch is fixing existing issues:
- potential bytes dropping with flow control enabled
- busywaiting for ENDTX (asynchronous API) - poor performance
- potential bytes dropping during preemption
- potential uart_tx returning -EBUSY when interrupted poll_out
Signed-off-by: Krzysztof Chruscinski <krzysztof.chruscinski@nordicsemi.no>
Removed flow control configuration from Kconfig and updated samples
to use device tree for that.
Signed-off-by: Krzysztof Chruscinski <krzysztof.chruscinski@nordicsemi.no>
Make I2C and SPI drivers for nRF SoCs no longer dependent on Kconfig
options that enable instances (i.e. I2C_x and SPI_x). Now these drivers
enable hardware instances when corresponding nodes in devicetree are
enabled (have status "okay").
For I2C, SPI, and UART drivers, instead of using Kconfig dependencies
to prevent enabling of hardware instances that cannot be used together
(e.g. SPIM1 and TWIM1), a file that signals invalid configurations with
build assertions is added to compilation.
Also dependencies on HAS_HW_NRF_* options are removed from Kconfigs
of I2C, SPI, and UART drivers, as for hidden options that activate
proper type of driver such dependencies are not actually helpful.
Signed-off-by: Andrzej Głąbek <andrzej.glabek@nordicsemi.no>
Remove prompts from Kconfig options `UART_x_NRF_UART*` that select
the type of nrfx driver (for UART or UARTE peripheral) to be used
for a given instance. This prevents the options from being modified
from configuration files.
Instead, make one of these options selected by default according to the
"compatible" property set for the corresponding UART node in devicetree.
This eliminates the need of changing both the "compatible" property in
devicetree and the Kconfig option selecting the driver type when a user
wants to switch between UART and UARTE for a given instance.
Since all `UART_x_NRF_UART*` options are made "hidden" by this commit,
all their occurrences in configuration files are removed.
Signed-off-by: Andrzej Głąbek <andrzej.glabek@nordicsemi.no>
Use this short header style in all Kconfig files:
# <description>
# <copyright>
# <license>
...
Also change all <description>s from
# Kconfig[.extension] - Foo-related options
to just
# Foo-related options
It's clear enough that it's about Kconfig.
The <description> cleanup was done with this command, along with some
manual cleanup (big letter at the start, etc.)
git ls-files '*Kconfig*' | \
xargs sed -i -E '1 s/#\s*Kconfig[\w.-]*\s*-\s*/# /'
Signed-off-by: Ulf Magnusson <Ulf.Magnusson@nordicsemi.no>
In some applications where power management is used, it is not expected
that the GPIO pins of the UARTE is reconfigured upon power state change.
Added a Kconfig option to disable the UARTE driver management of GPIOs.
It defaults to y in order to not affect current behavior unless the user
configures it specifically.
Signed-off-by: Dennis Wildmark <dennis.wildmark@assaabloy.com>
Not all serial drivers support ASYNC operation and if they do,
they might not support it on every SoC.
Add the SERIAL_SUPPORT_ASYNC option to indicate ASYNC operation
is availiable.
Signed-off-by: Benjamin Valentin <benjamin.valentin@ml-pa.com>
The PR removes the exclusive limit on enabling both UART_ASYNC_API
and UART_INTERRUPT_DRIVEN so that both options can be enabled
together for same uart driver.
Also, the interrupt handler will be used for both cases. So, enable
definition of interrupt handler for both.
However, nRF UART driver still wants to enable only one of them.
So, a new config is added to disable the code for UART_ASYNC_API
when the option UART_INTERRUPT_DRIVEN is enabled.
Signed-off-by: Jun Li <jun.r.li@intel.com>
In Nordic SoCs, SPI and TWI peripherals with the same instance number
share certain resources and therefore cannot be used at the same time
(in nRF91 Series this limitation concerns UART peripherals as well).
This patch adds Kconfig checks ensuring that only one of such mutually
exclusive peripherals can be enabled.
Signed-off-by: Andrzej Głąbek <andrzej.glabek@nordicsemi.no>
Make the following nRF peripheral drivers:
- ADC
- GPIO
- I2C
- SPI
- UART
- USB_DEVICE
enabled by default so that users do not need to explicitly enable them
in their applications after choosing an nRF SoC as the build target.
Kconfig options enabling these drivers depend on both a given hardware
feature (e.g. I2C) and an nRF family SoC selected, so effectively they
will be automatically enabled only when it is adequate (and in most
cases these drivers are the only option for a given hardware feature
on nRF SoCs).
Signed-off-by: Andrzej Głąbek <andrzej.glabek@nordicsemi.no>
Implementations of both flavors of serial drivers for Nordic SoCs
are no longer dependent on the gpio driver. Remove the dependency
from Kconfig.
Signed-off-by: Andrzej Głąbek <andrzej.glabek@nordicsemi.no>
This commit removes the Kconfig symbol definitions
that signify the UARTE_1 pins. The symbols are
already removed for UARTE_0.
Signed-off-by: Ioannis Glaropoulos <Ioannis.Glaropoulos@nordicsemi.no>
UART pins (TX, RX, RTS, CTS) are now configured in DTS files.
RTS and CTS definitions are optional. If flow control is enabled
and RTS/CTS pins are not defined, then compiler will issue
an error message.
Signed-off-by: Paweł Zadrożniak <pawel.zadrozniak@nordicsemi.no>
1. Added support for two instances of UARTE.
2. Kconfig.nrfx is capable to configure UART and UARTE driver.
Signed-off-by: Jakub Rzeszutko <jakub.rzeszutko@nordicsemi.no>
Condition:
depends on ((SOC_SERIES_NRF52X || SOC_SERIES_NRF51X) && (!SOC_NRF52810))
for displaing configuration for UART0 peripheral has been replaced with:
depends on HAS_HW_NRF_UART0.
Signed-off-by: Jakub Rzeszutko <jakub.rzeszutko@nordicsemi.no>
This symbol will be added by
https://github.com/zephyrproject-rtos/zephyr/pull/7915.
Having it in there doesn't hurt that much by itself (undefined symbols
default to 'n'), but I'm about to turn references to undefined Kconfig
symbols turn into an error.
Remove the reference.
Signed-off-by: Ulf Magnusson <Ulf.Magnusson@nordicsemi.no>
UART driver renamed to keep the same convention as SPI and TWI drivers.
All substrings: "UART_NRF5" in defines renamed to "UART_NRFX_UART".
Signed-off-by: Jakub Rzeszutko <jakub.rzeszutko@nordicsemi.no>
