Replace k_work_cancel_delayable() with k_work_cancel_delayable_sync()
to make sure that the submitted work becomes idle before accessing
sensitive data.
Signed-off-by: Robert Lubos <robert.lubos@nordicsemi.no>
This functions is being called across the tree, no reason why it should
not be a public API.
The current usage violates a few MISRA rules.
Signed-off-by: Anas Nashif <anas.nashif@intel.com>
Init function can be called multiple times (after each shell
reinitialization). It was missing reseting ring buffers and tx_busy
flag. When called once proper state of those variable where handled
by ram sections initialization.
Signed-off-by: Krzysztof Chruscinski <krzysztof.chruscinski@nordicsemi.no>
Shell uninitialization is not synchronous, it is deferred to shell
thread so resources used by the shell (e.g. transport resource like
uart) cannot be used until it is completed. Added callback which
notifies when all resources are released and shell is uninitialized.
Callback is called from shell thread just before it is aborted.
Signed-off-by: Krzysztof Chruscinski <krzysztof.chruscinski@nordicsemi.no>
Add Z_SHELL_SET_FLAG_ATOMIC macro to use technique from
shell_process() to atomically set and return the previous
value.
Change all void z_flag_*_set() functions to bool z_flag_*_set()
and use macro to return previous value after setting.
Modify shell_process() to use this modified z_flag_processing_set()
function.
Reorder flags to keep last_nl on byte boundary.
Add public setters for insert_mode, echo, and mode_delete for
completeness.
Signed-off-by: Pete Skeggs <peter.skeggs@nordicsemi.no>
Add flag to shell_flags to control echo as obscure
character (for passwords) or not. Add setter and getter
functions. Modify shell echo to use this flag if set.
Also add public setter for color mode and obscure mode.
Signed-off-by: Pete Skeggs <peter.skeggs@nordicsemi.no>
The clock/timer APIs are not application facing APIs, however, similar
to arch_ and a few other APIs they are available to implement drivers
and add support for new hardware and are documented and available to be
used outside of the clock/kernel subsystems.
Remove the leading z_ and provide them as clock_* APIs for someone
writing a new timer driver to use.
Signed-off-by: Anas Nashif <anas.nashif@intel.com>
Building this file with CONFIG_COVERAGE=y and CONFIG_SHELL_LOG_BACKEND=n
fails on the llvm-clang compiler. Swapping the IS_ENABLED and
log_backend allows the compiler to optimize out the if block even with
coverage enabled.
Signed-off-by: Jeremy Bettis <jbettis@chromium.org>
Sometimes it is hard to tell which instance of a thread is which
in the printed list, based solely on the name (if present) and
the k_thread pointer, so also print the thread entry fn pointer.
Signed-off-by: Pete Skeggs <peter.skeggs@nordicsemi.no>
If a shell command is compiled out using SHELL_COND_CMD(),
a line for this command will still be printed but will
be blank. Change it so compiled out commands are not
listed as blank lines.
Signed-off-by: Pete Skeggs <peter.skeggs@nordicsemi.no>
This functionality is is enabled by setting CONFIG_SHELL_GETOPT.
It is not active by default.
User can call following functions inside command handlers:
- shell_getopt - getopt function based on freebsd implementation
- shell_getopt_status_get - returns getopt status
Beware when getopt functionality is enabled shell will not parse
command handler to look for "-h" or "--help" options and print
help message automatically.
Signed-off-by: Jakub Rzeszutko <jakub.rzeszutko@nordicsemi.no>
Shell will not "steal" by default "-h" and "--help" each time
help functions are enabled.
This change is necessary to implement and use the getopt library.
Signed-off-by: Jakub Rzeszutko <jakub.rzeszutko@nordicsemi.no>
The default shell configuration has heavy flash and memory requirements,
requiring project maintainers to set many configuration options to "n"
to keep flash and memory requirements within reason.
This adds a new configuration option, CONFIG_SHELL_MINIMAL, which will
disable flash and memory heavy options by default, and allow project
maintainers to select/imply only the options they want.
On a quick test from an ARM board I'm working on, enabling this option
cut flash space requirements by ~8 KB, and memory requirements by ~1 KB.
Signed-off-by: Jack Rosenthal <jrosenth@chromium.org>
This makes cbprintf_nano.c much closer to the standard printf and
therefore more useful. The following are now implemented:
- right justification for everything (only for numbers previously)
- precision value for numbers, chars and strings
- width/precision passed as arguments with *
- "unlimited" padding length
- lower/uppercase hex output
- the #, + and ' ' flags are supported
And the code was heavily reworked to reduce its size as much as
possible to mitigate the size growth. Still, the binary resulting
from cbprintf_nano.c is now between 10% and 20% bigger depending on
the architecture. This is still far smaller than cbprintf_complete.c
which remains about twice as big on average even without FP support.
Many unit tests that were skipped with CONFIG_CBPRINTF_NANO are now
enabled, and a few more were added for good measure.
Signed-off-by: Nicolas Pitre <npitre@baylibre.com>
The ASSERT order is backwards, where the shell->ctx is being accessed
before it is being checked as valid. Moving the check for the
shell->ctx to before the using it.
Signed-off-by: Dan Kalowsky <dkalowsky@amperecomputing.com>
Fix the order so that it reflects the actual initialization order,
rather than putting PRE_KERNEL initializations after APPLICATION.
Add SMP in the proper location.
Use the helper function to provide unique identifiers for "devices"
that don't have a device pointer (so don't have a name).
Signed-off-by: Peter Bigot <peter.bigot@nordicsemi.no>
Refactor the output of device list to use standard API to retrieve the
list of devices, and to always display a status rather than hiding
disabled/failed devices.
Add API to associate a distinct identifier with any "device" that does
not have a name.
Where a device has requires dependencies display the devices on which
it depends.
Signed-off-by: Peter Bigot <peter.bigot@nordicsemi.no>
Refactor the output of device list to use standard API to retrieve the
list of devices, and to always display a status rather than hiding
disabled/failed devices.
Add API to associate a distinct identifier with any "device" that does
not have a name.
Where a device has requires dependencies display the devices on which
it depends.
Signed-off-by: Peter Bigot <peter.bigot@nordicsemi.no>
Function shell_root_cmd_find was only used in shell_utils.c file.
Hence it is changed to static and renamed to root_cmd_find.
Signed-off-by: Jakub Rzeszutko <jakub.rzeszutko@nordicsemi.no>
- Remove SYS_ prefix
- shorten POWER_MANAGEMENT to just PM
- DEVICE_POWER_MANAGEMENT -> PM_DEVICE
and use PM_ as the prefix for all PM related Kconfigs
Signed-off-by: Anas Nashif <anas.nashif@intel.com>
Updated the documantation with newly added configuration features.
Added information where to find minimal shell config file.
Added information how to activate particular features.
Signed-off-by: Jakub Rzeszutko <jakub.rzeszutko@nordicsemi.no>
The help command is needed to list all available commands
when it is not possible to use the tab key.
Previously when build-in commands were deactivated command
help was not compiled as well.
Signed-off-by: Jakub Rzeszutko <jakub.rzeszutko@nordicsemi.no>
Added IS_ENABLED(CONFIG_SHELL_CMDS_SELECT) to remove a dead code.
Added static inline function that returns pointer to the selected
command.
Signed-off-by: Jakub Rzeszutko <jakub.rzeszutko@nordicsemi.no>
When history feature is not compiled in it makes no sense to
trim the command. In addition when history feature is not active the
shell will not call function history_put.
Signed-off-by: Jakub Rzeszutko <jakub.rzeszutko@nordicsemi.no>
When calculating the size of unused interrupt stacks on SMP,
the "unused" variable is not cleared between CPUs. So this
value keeps incrementing and does not reflect actual unused
size for CPUs other than the first one. So clear the "unused"
variable for each CPU.
Signed-off-by: Daniel Leung <daniel.leung@intel.com>
This reverts commit e812ee6c21.
This is the initial step towards replacing the core Zephyr formatting
infrastructure with a common functionally-complete solution.
Signed-off-by: Peter Bigot <peter.bigot@nordicsemi.no>
The objects should be const-qualified for consistency with other uses,
including declarations in headers.
Signed-off-by: Peter Bigot <peter.bigot@nordicsemi.no>
Default shell stack size is not always enough when used with
OpenThread. Increasing it to the found adequate value.
Signed-off-by: Eduardo Montoya <eduardo.montoya@nordicsemi.no>
Fix a compilation error when shell help feature was not selected and
but shell help command was compiled.
Fixes: #29042
Signed-off-by: Jakub Rzeszutko <jakub.rzeszutko@nordicsemi.no>
With only single RX buffer there is a high chance that such buffer will
not be processed before new bytes come in over UART. This is why it is
good to have at least two buffers, one which can be processed by SMP
layer, while another is being filled with new incoming bytes.
Add Kconfig option which allows to configure multiple buffers filled
with received UART SMP fragments. Use default value of 2, so we can
safely process already received frame in thread, while new fragment
comes in concurrently.
Signed-off-by: Marcin Niestroj <m.niestroj@grinn-global.com>
So far there was a simple char array used as buffer, with additional
variable representing number of bytes already written into it. After
full frame was written, a boolean flag was simply set to notify thread
about being ready to be processed. There was however no mechanism
implemented to prevent new incoming bytes from overwriting such buffer
before (or during) being processed.
Use net_buf to store temporary frame. Define dedicated net_buf_pool,
from which such buffer will be allocated and freed after being
processed. This will prevent from reusing the same buffer before having
it fully processed (and returning once again to available buffer pool)
in shell thread.
Define also fifo that will store buffers that are ready to be
processed. This will be the mechanism for notifying thread about new
UART SMP fragments.
net_buf pool and k_fifo are used on purpose, keeping in mind their
additional overhead (mostly in RAM/ROM usage). This makes the code ready
for increasing number of buffers if needed. In this commit however we
stick with only 1 buffer, to keep minimal changes in processing flow.
Signed-off-by: Marcin Niestroj <m.niestroj@grinn-global.com>
To get a list of all supported shell commands user must hit the TAB
button. It may be awkward on some terminal emulators. This change
enhances the help command in a way it will in addition print all
supported commands.
Fixes: #28785
Signed-off-by: Jakub Rzeszutko <jakub.rzeszutko@nordisemi.no>
Functions shell_help_subcmd_print and shell_help_cmd_print
are more generic. Now they can operate on command passed as an
argument not hard coded active_cmd.
Signed-off-by: Jakub Rzeszutko <jakub.rzeszutko@nordisemi.no>
Commit 770f232a67 removes an array
termination from the shell_make_argv function. This function was
called from two functions: execute and tab_handle. In the mentioned
commit termination was added only in the execute function.
As a result calling tab_handle function was causing a segmentation
fault. This fix adds array termination to the tab_handle function.
Fixes#28434
Signed-off-by: Jakub Rzeszutko <jakub.rzeszutko@nordisemi.no>
Closes: #28331
Configurable initialization priority is useful when using CDC ACM
serial device, for example.
Signed-off-by: Ievgenii Meshcheriakov <ievgenii.meshcheriakov@nordicsemi.no>
Shell was accepting CONFIG_SHELL_ARGC_MAX+1 arguments which lead to
memory corruption and fault. Added error message reported when number
of provided arguments exceeds CONFIG_SHELL_ARGC_MAX.
Signed-off-by: Krzysztof Chruscinski <krzysztof.chruscinski@nordicsemi.no>
This fix prevents a scenario when command callback calls shell_fprintf
after the shell cleared the command context flag and before setting
the prompt correctly.
Fixes#27522
Signed-off-by: Jakub Rzeszutko <jakub.rzeszutko@nordisemi.no>
shell_fprintf requires that formatted output be emitted with a
putchar()-like output function. Newlib does not provide such a
capability. Zephyr provides two solutions: z_prf() which is part of
minimal libc and handles floating point formatting, and z_vprintk()
which is core and does not support floating point.
Move z_prf() out of minimal libc into the core lib area, and use it
unconditionally in the shell.
Signed-off-by: Peter Bigot <peter.bigot@nordicsemi.no>
The smp_shell_rx_byte has been renamed to smp_shell_rx_bytes and now
accepts data buffer pointer and its size as parameters. Return value
has been changed to size_t and represents number of bytes processed from
the given buffer.
The change has been done to more efficiently serve most common scenario
when the function is called in loop to process buffer, byte by byte.
Previously such operation required passing each byte separately,
with the change the function will work directly on source buffer
reducing number of calls and byte copy operations.
Signed-off-by: Dominik Ermel <dominik.ermel@nordicsemi.no>
Now that device_api attribute is unmodified at runtime, as well as all
the other attributes, it is possible to switch all device driver
instance to be constant.
A coccinelle rule is used for this:
@r_const_dev_1
disable optional_qualifier
@
@@
-struct device *
+const struct device *
@r_const_dev_2
disable optional_qualifier
@
@@
-struct device * const
+const struct device *
Fixes#27399
Signed-off-by: Tomasz Bursztyka <tomasz.bursztyka@linux.intel.com>
-Wimplicit-fallthrough=2 requires a fallthrough comment or a compiler
to tells gcc that this happens intentionally.
Signed-off-by: Flavio Ceolin <flavio.ceolin@intel.com>
In case when SMP has been enabled, the shell_thread would be signaled
even if no data has been read from fifo.
Signed-off-by: Dominik Ermel <dominik.ermel@nordicsemi.no>
In case when shell ring buffer gets full the data may still be taken
from the UART fifo, byte by byte, and accepted by the SMP back-end,
if the back-end has been enabled.
Unfortunately the uart_rx_handle failed to check if it has been
successfull in reading a byte from the fifo, before passing it to
the SMP for processing, which could lead to processing random stack data
as a part of an SMP frame.
Additinally, when the SMP would have accepted the byte,
the uart_rx_handle would fail to signal shell_thread, that the SMP has
internally buffered data that could be processed.
Signed-off-by: Dominik Ermel <dominik.ermel@nordicsemi.no>
So far SMP shell transport was initialized in APPLICATION run level, but
shell over UART was initialized in POST_KERNEL. This could end up in
situation when received frames were scheduled for further processing in
SMP layer, when it was not initialized yet.
Export smp_shell_init() function declaration and call it before shell is
initialized with all its receive data handlers. This prevents situation
when data is scheduled for processing in SMP layer, when that one is not
ready yet.
Signed-off-by: Marcin Niestroj <m.niestroj@grinn-global.com>
Shell will display a warning message if there was a request to print
a message on the not initialized shell backend.
Signed-off-by: Jakub Rzeszutko <jakub.rzeszutko@nordisemi.no>
Disable shell print functions if the shell is not initialized.
Update tests accordingly.
Fixes#27161
Signed-off-by: Jakub Rzeszutko <jakub.rzeszutko@nordisemi.no>
Signed-off-by: Steven Slupsky <sslupsky@gmail.com>
This commit adds comment clarifying how does DTS chosen node,
'zephyr,shell-uart', impacts default value of option assigning UART
port to the shell.
Signed-off-by: Dominik Ermel <dominik.ermel@nordicsemi.no>
The definition of the help command has been changed
so that it does not accept the arguments.
Thanks to this it cannot be marked by the "select" command.
Signed-off-by: Jakub Rzeszutko <jakub.rzeszutko@nordisemi.no>
If the command buffer is empty the shell was trying to read a string
from a random memory location. Added a condition checking "argc" value
when the select command is executed.
Fixes: #27227
Signed-off-by: Jakub Rzeszutko <jakub.rzeszutko@nordisemi.no>
By adding a prompt, users can alter the default value
of SHELL_LOG_BACKEND.
While it makes sense that when you have a shell, the log
messages will, by default, be shown there,
sometimes you want to disable this selection.
For example, when you have a telnet shell (SHELL_BACKEND_TELNET)
and want to debug the network subsys.
Signed-off-by: David D <a8961713@gmail.com>
It is not needed by the command to have subcommand in order to be used
for prompting. Removed this condition from the shell engine.
Fixes#21819
Signed-off-by: Jakub Rzeszutko <jakub.rzeszutko@nordisemi.no>
If shell is enabled then enable all sub-shells if their dependencies are
satisfied. This was done for some modules and subsystems but was not
consistent.
Signed-off-by: Anas Nashif <anas.nashif@intel.com>
Currently this is useful only for some internal applications that
iterate over the device table, since applications can't get access to
a device that isn't ready, and devices can't be made unready. So it's
introduced as internal API that may be exposed as device_ready() when
those conditions change.
Signed-off-by: Peter Bigot <peter.bigot@nordicsemi.no>
Several shell modules use cloned code to iterate over all devices and
identify the nth instance that meets some criteria. The code was
repetitive and included various errors. Abstract to a helper function
that performs the check consistently.
Signed-off-by: Peter Bigot <peter.bigot@nordicsemi.no>
The extern array declaration of size 0 gives a warning when
compiling with GCC. Updated to use [] rather than [0].
Signed-off-by: Emil Gydesen <emil_gydesen@bose.com>
After recent changes to shell, there is no more "no_such_command:
command not found" message when executing non-existing command. Restore
that message, so users are warned once again about wrong command,
instead of silently ignoring their request.
Fixes: 512de5ecac ("shell: Refactor command execution to enable raw
arguments")
Signed-off-by: Marcin Niestroj <m.niestroj@grinn-global.com>
Some Kconfig defined devices may be defined using dt_chosen_label
function. Since there is no way to ensure a device enabled in dts
is also defined in Kconfig, it may happen that instance is not
actually defined.
In this case device_get_binding might return 0, leading to undefined
behavior in the function that calls it.
When not already done, systematically check return of function
device_get_binding on devices defined through dt_chosen_label macro.
Trigger ASSERT when required and return error when possible.
Fixes#20068
Signed-off-by: Erwan Gouriou <erwan.gouriou@linaro.org>
Default values were fixed in the code. Moved to Kconfig to allow
customized configuration. Custom configuration may be used to prevent
line breaking injected on terminal width.
Signed-off-by: Krzysztof Chruscinski <krzysztof.chruscinski@nordicsemi.no>
When the device driver model got introduced, there were no concept of
SYS_INIT() which can be seen as software service. These were introduced
afterwards and reusing the device infrastructure for simplicity.
However, it meant to allocate a bit too much for something that only
required an initialization function to be called at right time.
Thus refactoring the devices structures relevantly:
- introducing struct init_entry which is a generic init end-point
- struct deviceconfig is removed and struct device owns everything now.
- SYS_INIT() generates only a struct init_entry via calling
INIT_ENTRY_DEFINE()
- DEVICE_AND_API_INIT() generates a struct device and calls
INIT_ENTRY_DEFINE()
- init objects sections are in ROM
- device objects sections are in RAM (but will end up in ROM once they
will be 'constified')
It also generate a tiny memory gain on both ROM and RAM, which is nice.
Perhaps kernel/device.c could be renamed to something more relevant.
Signed-off-by: Tomasz Bursztyka <tomasz.bursztyka@linux.intel.com>
Added special flag that can be used to indicate that optional
arguments are passed without any parsing (e.g. quotation marks
removal). Modified execute command to parse command line buffer
argument by argument.
After this change it is possible to forward whole command to
command handler (using select).
Signed-off-by: Krzysztof Chruscinski <krzysztof.chruscinski@nordicsemi.no>
At present it is not possible to write a printf()-like function in
board code which outputs to the shell. Add shell_vfprintf() to permit
this.
Signed-off-by: Simon Glass <sjg@chromium.org>
It is useful to run tests which generate shell output and check that it
is correct. Update the existing 'dummy' backend to support this.
It works by retaining the output in a small buffer so that it can be
read and checked by the test.
Signed-off-by: Simon Glass <sjg@chromium.org>
Improve hexdump output of shell_hexdump() to match what is currently
printed by LOG_HEXDUMP*() family of functions. That way string buffers
that are sent/received using shell commands can be easily presented
using shell_hexdump() without loosing user experience (with previous
shell_hexdump() that printed only hex bytes) and code validity (printed
buffers are not always NULL terminated with only printable characters).
Signed-off-by: Marcin Niestroj <m.niestroj@grinn-global.com>
New function allows to set from the code the root command. It is
an equivalent of calling 'select <rootcmd>' except it sets command
for all shell instances.
Signed-off-by: Krzysztof Chruscinski <krzysztof.chruscinski@nordicsemi.no>
Kernel timeouts have always been a 32 bit integer despite the
existence of generation macros, and existing code has been
inconsistent about using them. Upcoming commits are going to make the
timeout arguments opaque, so fix things up to be rigorously correct.
Changes include:
+ Adding a K_TIMEOUT_EQ() macro for code that needs to compare timeout
values for equality (e.g. with K_FOREVER or K_NO_WAIT).
+ Adding a k_msleep() synonym for k_sleep() which can continue to take
integral arguments as k_sleep() moves away to timeout arguments.
+ Pervasively using the K_MSEC(), K_SECONDS(), et. al. macros to
generate timeout arguments.
+ Removing the usage of K_NO_WAIT as the final argument to
K_THREAD_DEFINE(). This is just a count of milliseconds and we need
to use a zero.
This patch include no logic changes and should not affect generated
code at all.
Signed-off-by: Andy Ross <andrew.j.ross@intel.com>
Replace all occurences of BUILD_ASSERT_MSG() with BUILD_ASSERT()
as a result of merging BUILD_ASSERT() and BUILD_ASSERT_MSG().
Signed-off-by: Oleg Zhurakivskyy <oleg.zhurakivskyy@intel.com>
There is a new init level SMP that was just added, and this module needs
to take it into account.
Signed-off-by: Tomasz Bursztyka <tomasz.bursztyka@linux.intel.com>
This reverts commit 8739517107.
Pull Request #23437 was merged by mistake with an invalid manifest.
Signed-off-by: Carles Cufi <carles.cufi@nordicsemi.no>
Replace all occurences of BUILD_ASSERT_MSG() with BUILD_ASSERT()
as a result of merging BUILD_ASSERT() and BUILD_ASSERT_MSG().
Signed-off-by: Oleg Zhurakivskyy <oleg.zhurakivskyy@intel.com>
The set of interrupt stacks is now expressed as an array. We
also define the idle threads and their associated stacks this
way. This allows for iteration in cases where we have multiple
CPUs.
There is now a centralized declaration in kernel_internal.h.
On uniprocessor systems, z_interrupt_stacks has one element
and can be used in the same way as _interrupt_stack.
The IRQ stack for CPU 0 is now set in init.c instead of in
arch code.
The extern definition of the main thread stack is now removed,
this doesn't need to be in a header.
Signed-off-by: Andrew Boie <andrew.p.boie@intel.com>
This is placeholder code; better kernel support for dumping
exception/interrupt related stacks is forthcoming.
Signed-off-by: Andrew Boie <andrew.p.boie@intel.com>
The variable needs to be an atomic_t, and in one case it was
being incremented outside of an atomic_inc/atomic_add.
Signed-off-by: Andrew Boie <andrew.p.boie@intel.com>
Currently only supports Unix time.
‘get’ subcommand returns date in format “Y-m-d H:M:S”
‘set’ subcommand format is ‘[Y-m-d] <H:M:S>’
The ‘set’ subcommand is implemented with basic date validation.
For user convenience of small adjustments to time the time argument
will accept H:M:S, :M:S or ::S where the missing field(s) will be
filled in by the previous time state.
Signed-off-by: Nick Ward <nix.ward@gmail.com>
The third argument in memmove can possible be greater than remaining
buffer size. Just ensuring that memmove will changes bytes only inside
the string buffer and nothing else.
Signed-off-by: Flavio Ceolin <flavio.ceolin@intel.com>
A `k_timer` callback is called from the ISR context on certain devices
(nRF), which resulted in an assert in the kernel, as `telnet_send`, and
thus `net_context_send` used a mutex.
Fix the issue by replacing a timer used by the `shell_telnet` module
with a delayed work, which will execute it's callback in a system
workqueue context.
Fixes#22697
Signed-off-by: Robert Lubos <robert.lubos@nordicsemi.no>
I think people might be reading differences into 'if' and 'depends on'
that aren't there, like maybe 'if' being needed to "hide" a symbol,
while 'depends on' just adds a dependency.
There are no differences between 'if' and 'depends on'. 'if' is just a
shorthand for 'depends on'. They work the same when it comes to creating
implicit menus too.
The way symbols get "hidden" is through their dependencies not being
satisfied ('if'/'depends on' get copied up as a dependency on the
prompt).
Since 'if' and 'depends on' are the same, an 'if' with just a single
symbol in it can be replaced with a 'depends on'. IMO, it's best to
avoid 'if' there as a style choice too, because it confuses people into
thinking there's deep Kconfig magic going on that requires 'if'.
Going for 'depends on' can also remove some nested 'if's, which
generates nicer symbol information and docs, because nested 'if's really
are so simple/dumb that they just add the dependencies from both 'if's
to all symbols within.
Replace a bunch of single-symbol 'if's with 'depends on' to despam the
Kconfig files a bit and make it clearer how things work. Also do some
other minor related dependency refactoring.
The replacement isn't complete. Will fix up the rest later. Splitting it
a bit to make it more manageable.
(Everything above is true for choices, menus, and comments as well.)
Detected by tweaking the Kconfiglib parsing code. It's impossible to
detect after parsing, because 'if' turns into 'depends on'.
Signed-off-by: Ulf Magnusson <Ulf.Magnusson@nordicsemi.no>
The existing stack_analyze APIs had some problems:
1. Not properly namespaced
2. Accepted the stack object as a parameter, yet the stack object
does not contain the necessary information to get the associated
buffer region, the thread object is needed for this
3. Caused a crash on certain platforms that do not allow inspection
of unused stack space for the currently running thread
4. No user mode access
5. Separately passed in thread name
We deprecate these functions and add a new API
k_thread_stack_space_get() which addresses all of these issues.
A helper API log_stack_usage() also added which resembles
STACK_ANALYZE() in functionality.
Fixes: #17852
Signed-off-by: Andrew Boie <andrew.p.boie@intel.com>
Show current power management state in the list of devices, which is
helpful during PM debugging.
Signed-off-by: Marcin Niestroj <m.niestroj@grinn-global.com>
So far shell transport was initialized early before any k_poll events
and signals. transport_evt_handler() was passed as callback to transport
initializer and could be executed right away. This was true for example
with shell_uart when it enabled interrupts on RX and there were already
some bytes to read. As a result executed transport_evt_handler() is
operating on uninitialized k_poll signals.
Address this race condition by simply initializing shell transport when
everything is ready for processing data, i.e. on the end of shell
instance initialization.
Signed-off-by: Marcin Niestroj <m.niestroj@grinn-global.com>
Have SHELL_BACKEND_RTT depend on USE_SEGGER_RTT instead of selecting it,
to fix some selects of USE_SEGGER_RTT with unsatisfied dependencies.
USE_SEGGER_RTT was being forced on without checking HAS_SEGGER_RTT.
This means configuration files now have to enable both USE_SEGGER_RTT
and SHELL_BACKEND_RTT to enable SHELL_BACKEND_RTT. At least
samples/subsys/shell/shell_module/prj_minimal_rtt.conf does.
(The original version of this commit added a dependency on
HAS_SEGGER_RTT to SHELL_BACKEND_RTT instead, but Krzysztof Chruscinski
suggested depending on USE_SEGGER_RTT instead.)
Footnote: 'depends on' conditions get propagated to properties, so this
change is the same as adding '... if USE_SEGGER_RTT' to all properties
(and the prompt).
Signed-off-by: Ulf Magnusson <Ulf.Magnusson@nordicsemi.no>
RTT_CONSOLE depends on CONSOLE, but SEGGER_SYSTEMVIEW and
SHELL_BACKEND_RTT select RTT_CONSOLE without also selecting CONSOLE.
This leads to a build failure in drivers/console/rtt_console.c (compiled
if RTT_CONSOLE is enabled) unless CONSOLE is enabled some other way.
Symbols like CONFIG_RTT_RETRY_DELAY_MS won't be defined, because they
depend on CONSOLE.
Came up in https://github.com/zephyrproject-rtos/zephyr/pull/21860. This
fix was verified there.
(Would be nice to get rid of some 'select's in the console subsystem at
some point. This is a quick fix.)
Signed-off-by: Ulf Magnusson <Ulf.Magnusson@nordicsemi.no>
Remove leading/trailing blank lines in .c, .h, .py, .rst, .yml, and
.yaml files.
Will avoid failures with the new CI test in
https://github.com/zephyrproject-rtos/ci-tools/pull/112, though it only
checks changed files.
Move the 'target-notes' target in boards/xtensa/odroid_go/doc/index.rst
to get rid of the trailing blank line there. It was probably misplaced.
Signed-off-by: Ulf Magnusson <Ulf.Magnusson@nordicsemi.no>
Size argument must be smaller than strTo buffer size since
strncpy terminates string with NULL.
Signed-off-by: Krzysztof Chruscinski <krzysztof.chruscinski@nordicsemi.no>
The current code is assuming that the pointer to the thread structure is
32bit, casting it to u32_t before printing its address. This is wrong on
64bit architectures (CONFIG_64BIT) and the compiler complains.
Fix the problem by using '%p' to print the address.
Signed-off-by: Carlo Caione <ccaione@baylibre.com>
Change common_beginning_find() to use temp_buffer for storing first
command when algorithm compares commands in search for common
beginning. It is done to support cases where syntax returned by
dynamic commands is transient (e.g. single static buffer is used
for to build syntax).
Signed-off-by: Krzysztof Chruscinski <krzysztof.chruscinski@nordicsemi.no>
Use this short header style in all Kconfig files:
# <description>
# <copyright>
# <license>
...
Also change all <description>s from
# Kconfig[.extension] - Foo-related options
to just
# Foo-related options
It's clear enough that it's about Kconfig.
The <description> cleanup was done with this command, along with some
manual cleanup (big letter at the start, etc.)
git ls-files '*Kconfig*' | \
xargs sed -i -E '1 s/#\s*Kconfig[\w.-]*\s*-\s*/# /'
Signed-off-by: Ulf Magnusson <Ulf.Magnusson@nordicsemi.no>
Clean up space errors and use a consistent style throughout the Kconfig
files. This makes reading the Kconfig files more distraction-free, helps
with grepping, and encourages the same style getting copied around
everywhere (meaning another pass hopefully won't be needed).
Go for the most common style:
- Indent properties with a single tab, including for choices.
Properties on choices work exactly the same syntactically as
properties on symbols, so not sure how the no-indentation thing
happened.
- Indent help texts with a tab followed by two spaces
- Put a space between 'config' and the symbol name, not a tab. This
also helps when grepping for definitions.
- Do '# A comment' instead of '#A comment'
I tweaked Kconfiglib a bit to find most of the stuff.
Some help texts were reflowed to 79 columns with 'gq' in Vim as well,
though not all, because I was afraid I'd accidentally mess up
formatting.
Signed-off-by: Ulf Magnusson <Ulf.Magnusson@nordicsemi.no>
User could telnet to zephyr only once and the second connection
was denied. The reason was that the telnet socket was not properly
marked as accepting a new connection.
Fixes#20042
Signed-off-by: Jukka Rissanen <jukka.rissanen@linux.intel.com>
Unused since commit 08f0d93cbb ("shell: Improve handling of log
messages").
Discovered with a script.
Signed-off-by: Ulf Magnusson <Ulf.Magnusson@nordicsemi.no>
Use the int_literal_to_timeout Coccinelle script to convert literal
integer arguments for kernel API timeout parameters to the standard
timeout value representations.
Signed-off-by: Peter Bigot <peter.bigot@nordicsemi.no>
These checks should be against CONFIG_SHELL_LOG_BACKEND,
and not against CONFIG_LOG, since it's possible to enable
logging without building this particular backend.
Signed-off-by: Andrew Boie <andrew.p.boie@intel.com>
The $(dt_chosen_label) preprocessor function should be passed
$(DT_CHOSEN_Z_SHELL_UART), not $(UART_SHELL_ON_DEV_NAME).
DT_CHOSEN_Z_SHELL_UART is set right before the Kconfig symbol
definition, to work around the comma in 'zephyr,shell-uart'.
The Kconfig preprocessor functions are defined in
scripts/kconfig/kconfigfunctions.py.
Fixes: #19178
Signed-off-by: Ulf Magnusson <Ulf.Magnusson@nordicsemi.no>
Convert how we get the various chosen properties like "zephyr,console"
to use the new kconfig functions like dt_chosen_to_label.
Because of how kconfig parses things we define a set of variables of the
form DT_CHOSEN_Z_<PROP> since comma's are parsed as field seperators in
macros.
This conversion allows us to remove code in gen_defines.py for the
following chosen properties:
zephyr,console
zephyr,shell-uart
zephyr,bt-uart
zephyr,uart-pipe
zephyr,bt-mon-uart
zephyr,uart-mcumgr
zephyr,bt-c2h-uart
Signed-off-by: Kumar Gala <kumar.gala@linaro.org>
1) Dump time sinse last scheduler call
Could be handy for tickless kernel debug.
Will indicate that no rtc irq is called
2) Dump current timeout of each thread
Could be used to find yout when thread will wake up
3) Dump human friendly thread state
4) Use shell_prin instead shell_fprintf
Signed-off-by: Pavlo Hamov <pavlo_hamov@jabil.com>
With CONFIG_LOG_IMMEDIATE, log output is printed immediately. If a
shell command is in progress, there's no prompt to erase, nor should
we print a new prompt after the log message is output.
Before this patch, a simple shell command like:
int cmd_log_erase(const struct shell *shell, size_t argc, char **argv)
{
LOG_INF("hello world");
return 0;
}
would output something like:
uart:~$ log erase
[00:00:02.623,718] <inf> cmd_log: hello world
uart:~$ loguart:~$
This patch fixes prompt handling while a command is active, and fixes
put_sync_hexdump to behave like put_sync_string.
Signed-off-by: Jim Paris <jim@jtan.com>
move misc/reboot.h to power/reboot.h and
create a shim for backward-compatibility.
No functional changes to the headers.
A warning in the shim can be controlled with CONFIG_COMPAT_INCLUDES.
Related to #16539
Signed-off-by: Anas Nashif <anas.nashif@intel.com>
move misc/stack.h to debug/stack.h and
create a shim for backward-compatibility.
No functional changes to the headers.
A warning in the shim can be controlled with CONFIG_COMPAT_INCLUDES.
Related to #16539
Signed-off-by: Anas Nashif <anas.nashif@intel.com>
move misc/printk.h to sys/printk.h and
create a shim for backward-compatibility.
No functional changes to the headers.
A warning in the shim can be controlled with CONFIG_COMPAT_INCLUDES.
Related to #16539
Signed-off-by: Anas Nashif <anas.nashif@intel.com>
move uart.h to drivers/uart.h and
create a shim for backward-compatibility.
No functional changes to the headers.
A warning in the shim can be controlled with CONFIG_COMPAT_INCLUDES.
Related to #16539
Signed-off-by: Anas Nashif <anas.nashif@intel.com>
move atomic.h to sys/atomic.h and
create a shim for backward-compatibility.
No functional changes to the headers.
A warning in the shim can be controlled with CONFIG_COMPAT_INCLUDES.
Related to #16539
Signed-off-by: Anas Nashif <anas.nashif@intel.com>
Ctrl+N - moves in history to next entry
Ctrl+P - moves in history to previous entry
Behavior of those meta-keys is the same as in bash and emacs, which
makes Zephyr shell even more familiar to play with.
Signed-off-by: Marcin Niestroj <m.niestroj@grinn-global.com>
Using void pointers as universal arguments is widely used. However, when
compiling a 64-bit target, the compiler doesn't like when an int is
converted to a pointer and vice versa despite the presence of a cast.
This is due to a width mismatch between ints (32 bits) and pointers
(64 bits). The trick is to cast to a widening integer type such as
intptr_t and then cast to
void*.
When appropriate, the INT_TO_POINTER macro is used instead of this
double cast to make things clearer. The converse with POINTER_TO_INT
is also done which also serves as good code annotations.
While at it, remove unneeded casts to specific pointer types from void*
in the vicinity, and move to typed variable upon function entry to make
the code cleaner.
Signed-off-by: Nicolas Pitre <npitre@baylibre.com>
The structure of the va_list type is architecture-dependent, and it
doesn't seem possible to initialize va_list variables in a portable way
(except by using va_start()). In particular, the x86_64 ABI defines the
type like this:
typedef struct {
unsigned int gp_offset;
unsigned int fp_offset;
void *overflow_arg_area;
void *reg_save_area;
} va_list[1];
Fortunately, the va_start() macro expects an uninitialized va_list
variable, so we can simply remove the initializers to make the code
portable.
Signed-off-by: Jakob Olesen <jolesen@fb.com>
Per guidelines, all statements should have braces around them. We do not
have a CI check for this, so a few went in unnoticed.
Signed-off-by: Anas Nashif <anas.nashif@intel.com>
When mcumgr smp data was received over shell uart transport
it was not waking up shell thread and thus request was not
processed. Shell thread must be waken up on any incoming
data, even data which is only dedicated for mcumgr smp.
Signed-off-by: Krzysztof Chruscinski <krzysztof.chruscinski@nordicsemi.no>
Shell history module reworked to use ring buffer for storing
commands. Dedicated buffer is used to story all command lineary.
History capacity is in bytes not in number of entries, e.g.
many short commands can be stored or few long (depending on
CONFIG_SHELL_HISTORY_BUFFER).
Removed implicit command null termination from shell_history and
added it to shell after fetching command line from the history.
Signed-off-by: Krzysztof Chruscinski <krzysztof.chruscinski@nordicsemi.no>
The "select" command has been implemented, which allows user to
narrow down the command tree.
This implementation differs from the "select" command available
in the legacy shell. In a new implementation, if the selected
command has a handler and if the user has not entered the
registered subcommand, the shell will call the handler of selected
command and pass the text as arguments.
This may be useful, for example, if someone wants to use the
shell as an interface to a modem that supports AT commands.
Instead of each time you write e.g:
at at+command1
at at+command2
at at+command3
user can execute following commands:
select at
at+command1
at+command2
at+command3
where:
at - root command for passing at commands to the modem
at+commandX - at command passed to the modem.
Signed-off-by: Jakub Rzeszutko <jakub.rzeszutko@nordicsemi.no>
By moving signals initialization to shell instance init function,
shell instance is ready to receive RX signals from backend before
thread is ready to handle them.
Signed-off-by: Krzysztof Chruscinski <krzysztof.chruscinski@nordicsemi.no>
Adding possibility to modify shell prompt in Kconfig and in prj.config
file.
Fixes#14547.
Signed-off-by: Jakub Rzeszutko <jakub.rzeszutko@nordicsemi.no>
Modified commands which depends on compile time flags to
use conditional macros.
Signed-off-by: Krzysztof Chruscinski <krzysztof.chruscinski@nordicsemi.no>
Added macros which can be used to create a command which depends
on compilation flag. Macros are a cleaner alternative to #ifdefs
around command registration and command handler.
Signed-off-by: Krzysztof Chruscinski <krzysztof.chruscinski@nordicsemi.no>
This introduces shell_hexdump API which can be used to print an array
such as a network buffer.
Signed-off-by: Luiz Augusto von Dentz <luiz.von.dentz@intel.com>
The 'Shell Options' menu contains just the 'menuconfig SHELL' menu in
the menuconfig interface.
Remove the 'Shell Options' menu and put 'menuconfig SHELL' directly in
the top-level menu instead. Also change the prompt from "Enable shell"
to just "Shell", to make it consistent with "Logging".
Signed-off-by: Ulf Magnusson <Ulf.Magnusson@nordicsemi.no>
A transport may receive multiple bytes of data between shell_thread
wakeups, but state_collect is only called once per wakeup. So it must
process all data, and only return when all data from the transport has
been consumed. This is mostly handled correctly, but there were two
places where state_collect would return early instead.
Signed-off-by: Jim Paris <jim@jtan.com>
Update the files which contain no license information with the
'Apache-2.0' SPDX license identifier. Many source files in the tree are
missing licensing information, which makes it harder for compliance
tools to determine the correct license.
By default all files without license information are under the default
license of Zephyr, which is Apache version 2.
Signed-off-by: Anas Nashif <anas.nashif@intel.com>
Rename reserved function names in the subsys/ subdirectory except
for static _mod_pub_set and _mod_unbind functions in bluetooth mesh
cfg_srv.c which clash with the similarly named global functions.
Signed-off-by: Patrik Flykt <patrik.flykt@intel.com>
Add TELNET backed for shell module. The TELNET implementation is based
on the telnet_console driver.
Signed-off-by: Robert Lubos <robert.lubos@nordicsemi.no>
Shell was selecting logger option which lead to define
CONFIG_LOG_RUNTIME_FILTERING generation even though log
was disabled. That messed up logger and lead to compilation
failure.
Signed-off-by: Krzysztof Chruscinski <krzysztof.chruscinski@nordicsemi.no>
This didn't compile if CONFIG_SHALL_ECHO_STATUS wasn't
enabled.
Based on a fix by Rodrigo Peixoto.
Fixes: #14546
Signed-off-by: Andrew Boie <andrew.p.boie@intel.com>
Maybe this is some "just in case" thing that got copied around. There's
no need to have a blank line at the beginning or end of Kconfig files.
Signed-off-by: Ulf Magnusson <Ulf.Magnusson@nordicsemi.no>
According to the Coverity issue 190614 (github issue #12319)
Fix for logically dead code in function buffer_trim
Before while execution cannot reach this statement: buff[0] = '\0';
Tested and noticed that part of code is unnecessary inside of while
For the test, I made the same function in CodeBlocks and send to it
string to detect and delete whitespaces. After deletion of dead code
part, I tested function again, it works.
Function buffer_trim first detects whitespace characters in the end
of the string using first while, then it adds '\0' to the end
of the string to mark that string has new end after all whitespace
characters. Second while finds whitespaces at the beginning
of the string and counts how many whitespaces it found.
In the end using if counted whitespaces are removing from the
string.
Signed-off-by: Maksim Masalski <maxxliferobot@gmail.com>
It is planned to deprecate SHELL_CREATE_STATIC_SUBCMD_SET macro
which is replaced by SHELL_STATIC_SUBCMD_SET_CREATE.
Additionally, removed irrelevant comments about alphabetical
ordering which is no longer needed.
Signed-off-by: Krzysztof Chruscinski <krzysztof.chruscinski@nordicsemi.no>
Shell arguments structure was stored as a pointer in shell structure
and NULL pointer indicated that argument count checking is skipped.
It has been reworked to hold the structure (2 bytes) in the shell
structure with mandatory=0 skipping the check. This approach is cpp
friendly, contrary to the legacy one.
Signed-off-by: Krzysztof Chruscinski <krzysztof.chruscinski@nordicsemi.no>
It was possible to deadlock the shell when command
suspended shell's thread and next another thread wanted
to print something on the shell.
To avoid that shell releases mutex before entering command
handler. Due to this change some adapations to shell
internal print functions have been applied.
This change addresses following usecase:
1. A command handler needs to call a (system) function which
communicate results via a callback, and this callback is expected
to print these results. The callback is called by the system from
another thread.
2. To achieve that, the handler needs to pass `struct shell *`
to callbacks, but also some other data specific to callback.
Thus, handles allocates some structure will those fields on
the stack.
3. The handler schedules this callback to be called.
4. As a reference to stack structure is passed to the callback,
the handler can't return immediately (or stack data will go out
of scope and will be overwritten).
5. So, the handler blocks waiting for callback to finish.
Previously, this scenario led to deadlock when the callback
trying or print to shell. With these changes, it just works,
as long as main handler and callback serialize there access
to the shell structure (i.e. when callback prints, the main
handler is blocked waiting for its completion).
Signed-off-by: Jakub Rzeszutko <jakub.rzeszutko@nordicsemi.no>
Shell RTT backend was using RTT call which was using
lock (mutex). In case of panic, that lead to failure
if panic occured in the interrupt context where mutex
is not permitted.
Implementation changed to use write without log in
blocking mode.
Additionally, added static assert to check if raw RTT
log backend is not enabled on channel 0 which is used
by shell RTT backend.
Signed-off-by: Krzysztof Chruscinski <krzysztof.chruscinski@nordicsemi.no>
Prompt length is used when printing log messages to erase
prompt. If length is not updated and new prompt is longer
than default one then only part of the prompt is erased
which looks like data corruption.
Signed-off-by: Krzysztof Chruscinski <krzysztof.chruscinski@nordicsemi.no>
This change removes special handling for shell root commands.
Currently there is one loop in execute function that is used
to search commands on each level.
Fixed a bug where command buffer has been processed twice
when it was not needed (wildcards not found).
This change will allow to simplify "select" command
introduction.
Signed-off-by: Jakub Rzeszutko <jakub.rzeszutko@nordicsemi.no>
Shell will store only pointer to the prompt string instead of
copying it to the RAM buffer. It will save RAM memory and
it will simplify implementation of a new feature: "select"
command. When a command will be selected than shell will
display command syntax as a prompt.
Removed obsolete ASSERT check in a static function.
Signed-off-by: Jakub Rzeszutko <jakub.rzeszutko@nordicsemi.no>
Replace generating CONFIG_ symbols with DT_ symbols for chosen
properties like 'zephyr,console' or 'zephyr,bt-mon-uart'. We now use a
kconfigfunctions (dt_str_val) to extract the info from dts into Kconfig.
Signed-off-by: Kumar Gala <kumar.gala@linaro.org>
Last parameter of exec_cmd function has been corrected from
structure type to pointer to structure type.
Signed-off-by: Jakub Rzeszutko <jakub.rzeszutko@nordicsemi.no>
This patch increases the amount of slab memory per item for the shell
history to match the maximum command input buffer size plus the
accounting information for the dnode list item.
Signed-off-by: Andy Gross <andy.gross@linaro.org>
Extended shell to be able to process logs in place
(in the context of a log call). In order to achieve that,
shell was extended to support for TX blocking operations. If
CONFIG_LOG_INPLACE_PROCESS is enabled then shell instance
attempts to be initialized in blocking TX mode. If fails to
do so, shell log backend is disabled. If successfully enabled
logs are processed and printed in the context of the call.
Due to that change, user may expirience interleaved output as
shell has no means to multiplex shell output with logger output.
In extreme, huge amount of log messages may prevent shell thread
execution and shell may become unresponsive.
Signed-off-by: Krzysztof Chruscinski <krzysztof.chruscinski@nordicsemi.no>
Fixed spelling mistake in shell's Kconfig file.
Updated description in SHELL_CMD_BUFF_SIZE description.
In shell.c: removed obsolete empty line, added empty line
at the end of file.
Signed-off-by: Jakub Rzeszutko <jakub.rzeszutko@nordicsemi.no>
Added display text management to shell_fprintf function.
Now it can be used from diffrent threads with not risk that
displayed lines will overlay.
Signed-off-by: Jakub Rzeszutko <jakub.rzeszutko@nordicsemi.no>
Signed-off-by: Krzysztof Chruściński <krzysztof.chruscinski@nordicsemi.no>
Removed foreground command functionality from shell source files.
Removed associated example.
Removed enter/exit command functions from the Bluetooth example
Updated project config files.
Signed-off-by: Jakub Rzeszutko <jakub.rzeszutko@nordicsemi.no>
Function char_replace is only used in shell_ops.c file.
Added keyword static to function definition and removed
declaration from shell_ops.h
Signed-off-by: Jakub Rzeszutko <jakub.rzeszutko@nordicsemi.no>
Meta keys are active when they are enabled and when shell echo is set
to on.
Updated meta keys description in shell's Kconfig file.
Signed-off-by: Jakub Rzeszutko <jakub.rzeszutko@nordicsemi.no>
1. Update shell documentation according to proposals in
PR #12437 (Extend shell meta keys).
2. Fix lines exceeding 80 characters limit.
Signed-off-by: Jakub Rzeszutko <jakub.rzeszutko@nordicsemi.no>
Legacy shell removed in order to avoid maintaining two shells
systems.
All examples and tests have been migrated to the new shell.
Signed-off-by: Jakub Rzeszutko <jakub.rzeszutko@nordicsemi.no>
Added following meta-keys:
Ctrl-B - moves the cursor backward one character
Ctrl-D - deletes the character under the cursor
Ctrl-F - moves the cursor forward one character
Ctrl-K - deletes from the cursor to the end of the line
Alt-F - moves the cursor forward one word
Alt-B - moves the cursor backward one word
Signed-off-by: Jakub Rzeszutko <jakub.rzeszutko@nordicsemi.no>
Change arg_len to be u16_t in shell_history_get since it is returning
a value that can be hold by u16_t.
Signed-off-by: Flavio Ceolin <flavio.ceolin@intel.com>
Everywhere the return of this function was being assigned to u16_t to
save space on stack. Instead of casting in all these places (and may
end up with overflow), just changing this function's return.
Note that the function itself is not checking for overflow yet since
I'm not sure this can happen and/or is a problem. Though now we have
only one single point to fix this problem.
Signed-off-by: Flavio Ceolin <flavio.ceolin@intel.com>
ENOEXEC should be used for executable file format error.
While is undertandable return it when the command is wrong, this
function is returning it two cases where other errors are more
descriptive. When parameter is NULL, is better return EINVAL.
Signed-off-by: Flavio Ceolin <flavio.ceolin@intel.com>
Extended shell to allow command to indicate that shell should
halt not accepting any input until termination sequence is
received (CTRL+C) or shell_command_exit() is called. While shell
is in that state it is allowed to print to shell from any thread
context.
Signed-off-by: Krzysztof Chruscinski <krzysztof.chruscinski@nordicsemi.no>
Log message get timestamp when being added to shell log message queue.
When adding to log message queue timeouts then all messages added
before timeout are dropped.
Signed-off-by: Krzysztof Chruscinski <krzysztof.chruscinski@nordicsemi.no>
If burst of log messages was passed to the shell log
backend, it was likely that messages were lost because
shell had no means to control arrivals of log messages.
Added log message enqueueing timeout to the shell instance
to allow blocking logger thread if short-term arrival rate
exceeded shell capabilities.
Added kconfig option for setting log message queue size
and timeout in RTT and UART instances. Added section in
shell documentation which explains interaction between
the logger and shell instance acting as a logger backend.
Signed-off-by: Krzysztof Chruscinski <krzysztof.chruscinski@nordicsemi.no>
When help functionality is not compiled and command is called with
-h or --help option shell will now either pass this option as
an argument or it will print a message that command does not have
a handler.
Signed-off-by: Jakub Rzeszutko <jakub.rzeszutko@nordicsemi.no>
Removed shell_ prefix from static functions in .c files.
Added static functions for setting and getting shell
internal flags.
Signed-off-by: Jakub Rzeszutko <jakub.rzeszutko@nordicsemi.no>
shell parses output string and it adds \r for each found \n.
It is no longer needed to keep \r for each shell message.
Signed-off-by: Jakub Rzeszutko <jakub.rzeszutko@nordicsemi.no>
Removed Console dependencies from shell uart backend.
Generated define: CONFIG_UART_SHELL_ON_DEV_NAME for each board.
Fixes#10191
Signed-off-by: Jakub Rzeszutko <jakub.rzeszutko@nordicsemi.no>
1. Created new shell module: shell_help.
2. Simplified command handlers with new shell print macros.
3. Removed help functions from command handlers.
Signed-off-by: Jakub Rzeszutko <jakub.rzeszutko@nordicsemi.no>
Removed printing command help from help handler. It is now
realized by the shell engine. This change saves a lot of flash
but still allows to print help in command handler with function
shell_help_print.
Signed-off-by: Jakub Rzeszutko <jakub.rzeszutko@nordicsemi.no>
Removing help "options" from shell API.
Currently SHELL_OPT macro is not used by users. What is more
commit: a89690d10f ignores possible options created in
command handler by the user. As a result they are not printed
in help message.
Second, currntly implemented "options" in command handlers options are
implemented without SHELL_OPT macro.
And last but not least this change will allow to implement
help handler in a way that user will not need to think about calling
functions printing help in a command handler.
Signed-off-by: Jakub Rzeszutko <jakub.rzeszutko@nordicsemi.no>
Fix issue caused by 3fc497ac9a
This change removes `rtt` and `systemview` from header includes
as these are already placed in the path.
Also `SEGGER_SYSVIEW_ConfDefaults.h` header included from
`SEGGER_SYSVIEW_Int.h` is placed higher to make sure `INLINE`
definition is properly visible.
Signed-off-by: Pawel Dunaj <pawel.dunaj@nordicsemi.no>
Removed kconfig option for setting shell thread priority and fix
it to K_LOWEST_APPLICATION_THREAD_PRIO.
Signed-off-by: Krzysztof Chruscinski <krzysztof.chruscinski@nordicsemi.no>
Improved reception in the backend and replaced thread
with periodic timer as thread was used only to
periodically poll RTT data availability and using timer
is more RAM-wise efficient.
Signed-off-by: Krzysztof Chruscinski <krzysztof.chruscinski@nordicsemi.no>
Rephrase some help messages to decrease flash usage.
Deactivate shell history feature for test test_netusb_rndis
Signed-off-by: Jakub Rzeszutko <jakub.rzeszutko@nordicsemi.no>
Resize command requires shell to be working on UART interrupt
driven API. This will be now enabled by default when shell serial
backend is selected. Recently this feature was accidentally turned
off in PR #11556.
k_sleep(1) has been replaced with k_busy_wait(1000) to avoid
hanging in command handler.
Signed-off-by: Jakub Rzeszutko <jakub.rzeszutko@nordicsemi.no>
Shell used to require adding commands and subcommands in alphabetical
order to ensure correct autocompletion and printing options with the
<Tab> key.
Commit: bd3a4e5fe5 implemented correct
options printing with the <Tab> key for not sorted commands.
This PR allows to partially autocomplete not sorted commands.
Signed-off-by: Jakub Rzeszutko <jakub.rzeszutko@nordicsemi.no>
In case terminal sends `\r\n` on the Enter button
shell will go to the new line twice and it will print
prompt twice. This patch fixes it.
Signed-off-by: Jakub Rzeszutko <jakub.rzeszutko@nordicsemi.no>
Shell log backend was using k_fifo to enqueue log messages.
It was using field in log message that was used for same
purpose in log_core before passing message to backends.
However, this method supported only single shell as
other shell was corruption the fifo because field was
reused.
Modified shell log backend to use k_msgq for pending
messages.
Signed-off-by: Krzysztof Chruscinski <krzysztof.chruscinski@nordicsemi.no>
Currently shell UART backend is interrupt driven if UART driver
is interrupt driven. That can be limitation if one instance
wants to use interrupts but shell UART should not.
Added option to shell uart to be able to control use of
interrupts. By default interrupts are enabled if driver
supports it.
Signed-off-by: Krzysztof Chruscinski <krzysztof.chruscinski@nordicsemi.no>
RTT backend was returning number of transfered data equal
to requested amount because it was not taking into
account value returned by SEGGER_RTT_Write. As the outcome
data could be lost.
Signed-off-by: Krzysztof Chruscinski <krzysztof.chruscinski@nordicsemi.no>
Each shell thread will have unique name.
Previously thread name "shell" has been created for each shell
backend.
Signed-off-by: Jakub Rzeszutko <jakub.rzeszutko@nordicsemi.no>
RTT and uart shell backends were started with fixed
log limit set to INF. Configuration has been moved
to Kconfig allowing certain level or default LOG_MAX_LEVEL.
Signed-off-by: Krzysztof Chruscinski <krzysztof.chruscinski@nordicsemi.no>
Scenario where RX ring buffer is full and cannot accept
more data was not handled. In that case byte should be
dropped. Such situation may occur when long command is
pasted (exceeding ring buffer size).
Signed-off-by: Krzysztof Chruscinski <krzysztof.chruscinski@nordicsemi.no>
The code referenced CONFIG_SHELL_VT100_COLORS_ENABLED which does not
exist. Its mostly likely that CONFIG_SHELL_VT100_COLORS was meant
to be tested instead.
Signed-off-by: Kumar Gala <kumar.gala@linaro.org>
This allows the shell core to perform precheck before calling the
handler which then can assume the number of arguments is correct.
Signed-off-by: Luiz Augusto von Dentz <luiz.von.dentz@intel.com>
Improved RX path to use ring buffer for incoming data instead of single
byte buffer. Improved TX path to use ring buffer. Added support for
asynchronous UART API (interrupts).
Signed-off-by: Krzysztof Chruscinski <krzysztof.chruscinski@nordicsemi.no>
k_poll_signal was being used by both, struct and function. Besides
this being extremely error prone it is also a MISRA-C violation.
Changing the function to contain a verb, since it performs an action
and the struct will be a noun. This pattern must be formalized and
followed and across the project.
MISRA-C rules 5.7 and 5.9
Signed-off-by: Flavio Ceolin <flavio.ceolin@intel.com>
Fixed the case when TXDONE signal was not cleared. Bug was unnoticed
because UART backend was synchronous.
Signed-off-by: Krzysztof Chruscinski <krzysztof.chruscinski@nordicsemi.no>
Shell log backend was enabled too early, before shell thread was
up and running. That could lead to failure if log thread passes
log message to shell log backend.
Additionally, modified algorithm for multiplexing log output with
shell prompt. In case of logs flood prompt was unreadable because
it was deleted immediately after being printed. Added k_sleep
after printing prompt if any character was typed. This ensures that
shell prompt is readable if user uses it.
Signed-off-by: Krzysztof Chruscinski <krzysztof.chruscinski@nordicsemi.no>
Added dummy backend which can be enabled with Kconfig. By default it is
disabled because it needs the same amount of memory as other phisical
backends. It shall be use only for commands testing purposes.
Improved shell_execute_cmd function, now it clears command context
before new command will be executed.
Signed-off-by: Jakub Rzeszutko <jakub.rzeszutko@nordicsemi.no>
When user was typing a new command and next pressed an up arrow
shell has displayed previously executed command. Next it was not
possible to display back currently edited command using a down arrow.
Fixes#10766.
Signed-off-by: Jakub Rzeszutko <jakub.rzeszutko@nordicsemi.no>
1. Changed return value of function: shell_cmd_precheck from bool to
int. Now it returns:
0 when argument count is correct and help print is not requested
1 when help was requested and printed
-EINVAL on wrong arguments count
This change simply shell_cmd_precheck usege in command handlers.
2. Unified all commands in shell_cmd.c file.
3. Fixed a bug where help was not printed on wrong argument count.
Signed-off-by: Jakub Rzeszutko <jakub.rzeszutko@nordicsemi.no>
If user will enable shell than for each backend shell instance
will be created automatically.
Update all shell examples according to the new initialization
procedure.
Signed-off-by: Jakub Rzeszutko <jakub.rzeszutko@nordicsemi.no>
Some terminals literally interprets shell output data. Hence to print
a message in new line shell needs to send `\r\n` each time. To minimize
flash usage user can now send `\n` as a line delimiter and shell will
automatically add missing CR character.
Signed-off-by: Jakub Rzeszutko <jakub.rzeszutko@nordicsemi.no>
Added functionality to enable active shell backends via Kconfig
file. When there will be more backends implemented user will
have an option to select only required ones.
It is no longer needed to select SERIAL in prj.conf.
Fixes#10190
Signed-off-by: Jakub Rzeszutko <jakub.rzeszutko@nordicsemi.no>
This allows declaring the commands in any order which sometimes is
convenient when commands are conditional making it undesirable to
sort everything.
Signed-off-by: Luiz Augusto von Dentz <luiz.von.dentz@intel.com>
1. Shell will accept CR or LF as line delimiter.
2. Macro SHELL_DEFINE simplified - it no longer requires
new line character.
3. Fixes: #10207.
Signed-off-by: Jakub Rzeszutko <jakub.rzeszutko@nordicsemi.no>
1. Command handler can return command exectution status as int.
2. Existing command handlers rework.
Signed-off-by: Jakub Rzeszutko <jakub.rzeszutko@nordicsemi.no>
This PR fixes: #10195.
Function _vprintk when used cannot parse '*' what
a as result causes dereferencing bad pointer.
Signed-off-by: Jakub Rzeszutko <jakub.rzeszutko@nordicsemi.no>
Under GNU C, sizeof(void) = 1. This commit merely makes it explicit u8.
Pointer arithmetics over void types is:
* A GNU C extension
* Not supported by Clang
* Illegal across all ISO C standards
See also: https://gcc.gnu.org/onlinedocs/gcc/Pointer-Arith.html
Signed-off-by: Mark Ruvald Pedersen <mped@oticon.com>
The shell subsystem, as it is today, depends on having a UART,
therefore let's add the dependency explicitly in its Kconfig
Fixes#10190
Signed-off-by: Alberto Escolar Piedras <alpi@oticon.com>
