Add pin control group for UHS modes for H3ULCB, Salvator XS M3
boards to appropriate dts files. Both 'uhs' and 'default' pins
states have the same properties for eMMC, e.g. 1.8V.
Signed-off-by: Mykola Kvach <mykola_kvach@epam.com>
Add basic functionality of Renesas SD/MMC driver. It can be used
for both gen3 and gen4 R-car boards, but tested only with H3ULCB,
Salvator XS M3 and Spider boards. This driver working with SDHC
subsystem.
The driver supports regularal reading/writing throught SD/MMC
controller buffer, DMA mode w/o interrupts and timing tuning.
Add gpio5 and sd0 nodes to h3ulcb and salvator xs which are needed
for working with SD cards. The GPIO node is needed for switching
voltage on SD card through gpio regulator driver.
Notes:
* the driver doesn't support SPI mode;
* SCC tuning and DMA mode based on IRQs are enabled by default;
* an address of a data buffer has to be aligned to 128 bytes if it
is not, driver will use non-DMA mode automatically;
* Renesas MMC DMAC doesn't support 64-bit DMA addresses, so for
case when we have 64-bit xref data address we use non-DMA mode;
* SD/MMC controller supports block size between 512 and 1 with
a lot of restrictions, more details you can find in code;
* support of HS400 mode isn't implemented inside driver.
Signed-off-by: Mykola Kvach <mykola_kvach@epam.com>
This commit updates models metadata API to simplify the usage and
removes the metadata pointer in health server model context.
Signed-off-by: Omkar Kulkarni <omkar.kulkarni@nordicsemi.no>
Reduce the iterations in multiple id multiple simultaneous
connections test, and tune the buffer counts to catch any
buffer leak related regressions.
Signed-off-by: Vinayak Kariappa Chettimada <vich@nordicsemi.no>
Introduced a unified definition for HCI packet type indicators in
'bluetooth/hci_types.h. This change streamlines the code in
'drivers/bluetooth/hci/', reducing redundancy.
Enhances maintainability and consistency across all HCI drivers.
Signed-off-by: Pisit Sawangvonganan <pisit@ndrsolution.com>
This commit updates the device tree and memory header file
for the Intel MTPM 1.5 platform to define the LSBPM and
HSBPM registers.
Changes include:
- Added node definitions for 'lsbpm' and 'hsbpm' in
intel_adsp_ace15_mtpm.dtsi
- Updated adsp_memory.h
Signed-off-by: Damian Nikodem <damian.nikodem@intel.com>
This commit updates the device tree and memory header file
for the Intel LNL 2.0 platform to define the LSBPM and
HSBPM registers.
Changes include:
- Added node definitions for 'lsbpm' and 'hsbpm' in
intel_adsp_ace20_lnl.dtsi
- Updated adsp_memory.h
Signed-off-by: Damian Nikodem <damian.nikodem@intel.com>
This commit updates the device tree and memory header file
for the Intel cAVS 2.5 platform to define the LSBPM and
HSBPM registers.
Changes include:
- Added node definitions for 'lsbpm' and 'hsbpm' in
intel_adsp_cavs25.dtsi and intel_adsp_cavs25_tgph.dtsi
- Updated adsp_memory.h
Signed-off-by: Damian Nikodem <damian.nikodem@intel.com>
Add tests for the "device list" output with the various configuration of
device power management.
Signed-off-by: Fabio Baltieri <fabiobaltieri@google.com>
Add an extra "usage=%d" to the device status to show the current usage
counter when PM runtime is enabled.
Signed-off-by: Fabio Baltieri <fabiobaltieri@google.com>
The DCCM configuration was set inconsistently between nsim and
mdb arguments
Signed-off-by: Evgeniy Paltsev <PaltsevEvgeniy@gmail.com>
Signed-off-by: Eugeniy Paltsev <Eugeniy.Paltsev@synopsys.com>
After recent HWv2 model there is defconfig file
missing, so we got incorrect platform configuration. Fix that.
Signed-off-by: Eugeniy Paltsev <Eugeniy.Paltsev@synopsys.com>
Signed-off-by: Evgeniy Paltsev <PaltsevEvgeniy@gmail.com>
For CPP application, such as samples/cpp/cpp_synchronization/, it will
report the following building errors:
...
zephyrproject/modules/hal/nxp/imx/devices/MCIMX7D/./MCIMX7D_M4.h:5101:51:
error: 'reinterpret_cast<CCM_Type*>(808976384)' is not a constant
expression
...
The error is caused by commit: 72312feead
" arch: arm: cortex_m: Use cmsis api instead of inline asm in arch_irq_*"
This patch will cause kernel.h includes cmsis_core.h which includes soc.h,
so that soc.h will be used by c++ code.
This patch make soc.h can be c++ compatible.
Signed-off-by: Jiafei Pan <Jiafei.Pan@nxp.com>
Add a shell_device_filter variant of the shell device lookup helper that
takes a callback as an argument. This allows more complex filtering on
the device than the existing name prefix.
Signed-off-by: Fabio Baltieri <fabiobaltieri@google.com>
This adds a 'deveui64' command to display the just added EUI64 device
id. Display "Not supported by hardware" on devices that do not have it.
Signed-off-by: Aurelien Jarno <aurelien@aurel32.net>
The STM32WB, STM32WB and STM32WBA families devices include a EUI64 ID
(called "IEEE 64-bit unique device ID register" in the reference manual
that is distinct from the standard device ID. Add support for reading
it, noting that it is stored in little endian format in the registers.
On other families the weak implementation takes over and returns
-ENOSYS.
Signed-off-by: Aurelien Jarno <aurelien@aurel32.net>
Some devices, mostly with radio support, have an EUI64 ID (unique and
attributed by IEEE), in addition to the standard device ID.
Add support for reading it through the hwinfo API. As the size is always
the same (8 bytes), there is no need to pass the size in the function,
nor return the number of bytes copied.
Signed-off-by: Aurelien Jarno <aurelien@aurel32.net>
To be consistent with the computed offset on sensor_submit_fallback()
implementation. This prevents falling in misalignment issues when the
number of sensor channels changes.
Signed-off-by: Luis Ubieda <luisf@croxel.com>
Since this loops over all listed sensor channels, this makes more
difficult catching other debug log messages that might be of interest
(e.g: Decoding results).
Signed-off-by: Luis Ubieda <luisf@croxel.com>
Add a shield definition for the MikroElektronika Weather Click board.
The Weather Click board features the BME280 sensor, a combined humidity,
pressure, and temperature sensor from Bosch Sensortec.
This shield can be used with any board equipped with a mikroBUS socket
that provides a `mikrobus_i2c` devicetree node label.
Signed-off-by: Chris Wilson <chris@cgnd.dev>
Added code partitioning for ST Nucleo G431RB and G474RE boards.
Defined flash partitions including "mcuboot," "image-0," and "image-1".
Signed-off-by: Hudson C. Dalpra <dalpra.hcd@gmail.com>
When the CONFIG_WDT_DISABLE_AT_BOOT is not set, the iwdg
should be configured by iwdg_stm32_install_timeout
and started by iwdg_stm32_setup
Signed-off-by: Francois Ramu <francois.ramu@st.com>
Add device driver for TI TMP114 I2C temperature sensor.
The driver only support basic functionality, i.e. fetch temperature
using default values.
Datasheet:
https://www.ti.com/lit/ds/symlink/tmp114.pdf
Signed-off-by: Fredrik Gihl <fgihl@hotmail.com>
When in the BAP unicast server role, at least PAC sink
or PAC source shall be set.
In order to fulfill this new requirement, a few other Kconfig
options had to be changed to a `depends on` from `select` to
avoid recursive Kconfig requirements. This change may require
some applications to update their configurations according
to the migration guide.
The change from `select` to `depends on` is ideal anyhow
as that is the recommended way to add dependencies.
This can checked via the combined BT_PACS Kconfig value.
Signed-off-by: Emil Gydesen <emil.gydesen@nordicsemi.no>
Compilers predefine system-specific macros which carry information about
compiler, target architecture and operating system. It provides basic
compiler-dependent information like size of types, their maximal and
minimal values, etc. It allows to write common libc headers for multiple
architectures and operating systems.
These macros allow code to always determine what is the target operating
system. This is a problem when compiling code of modules that supports
multiple operating systems (e.g. cryptography libraries).
To avoid confusion we shouldn't leak host operating system macros (e.g.
__linux__, __linux, linux, etc.) when compiling for native_sim board.
Unfortunately, there is no single universal switch that disables all
operating system macros:
- '-undef' removes also architecture-related macros
- '--target' is only available for Clang compiler
This patch uses '-include' option to include file that undefines all
well-known operating system macros.
Run 'gcc -dM -E - < /dev/null | sort' to get full list of predefined
macros.
Signed-off-by: Patryk Duda <patrykd@google.com>
The behavior of glob() changedin Python 3.11 and runing the old one
means we are missing some changes that trigger a compliance failure when
ran on an updated system. Upgrade to 3.11 so those are caught in CI.
Signed-off-by: Fabio Baltieri <fabiobaltieri@google.com>
Fix few more paths that are failing to parse on system running Python >=
3.11 due to a change in behavior of glob.
Signed-off-by: Fabio Baltieri <fabiobaltieri@google.com>
