Deprecate `EFD_IN_USE` and `EFD_FLAGS_SET` as they are not
specified as part of any public `eventfd()` API.
While those are being deprecated, use `_INTERNAL` variants.
Signed-off-by: Christopher Friedt <cfriedt@meta.com>
TL;DR - a complete rewrite.
Previously, the prototypical `eventfd()` usage (one thread
performing a blocking `read()`, followed by another thread
performing a `write()`) would deadlock Zephyr. This shortcoming
has existed in Zephyr's `eventfd()` implementation from the
start and the suggested workaround was to use `poll()`.
However, that is not sufficient for integrating 3rd-party
libraries that may rely on proper `eventfd()` blocking
operations such as `eventfd_read()` and `eventfd_write()`.
The culprit was the per-fdtable-entry `struct k_mutex`.
Here we perform a minor revision of the locking strategy
and employ `k_condvar_broadcast()` and `k_condvar_wait()`
to signal and wait on the holder of a given `struct k_mutex`.
It is important to note, however, that the primary means of
synchronizing the eventfd state is actually the eventfd
spinlock. The fdtable mutex and condition variable are mainly
used for the purposes of blocking io (r,w,close) and are not
used in the code path of non-blocking reads.
The `wait_q` and `k_poll_signal` entries were removed from
`struct eventfd` as they were unnecessary.
Additionally, switch to using a bitarray because it is
possibly faster than linear search for allocating and
deallocating eventfd resources.
Signed-off-by: Christopher Friedt <cfriedt@meta.com>
There is no major benefit to haveing `eventfd_read()` and
`eventfd_write()` as `static inline` functions and it is
arguably much easier to solve the deadlock bug when they
are not `inline`.
Signed-off-by: Christopher Friedt <cfriedt@meta.com>
Complement the `struct k_mutex` in each fdtable entry
with a `struct k_condvar`. The reasoning for this should be
self-evident.
For a bit of history, `fdtable` was introduced in
commit 06eb489c45 ("kernel: add condition variables")
which predates `struct k_condvar`, introduced in
commit f484bbaa26 ("lib: posix: Implement generic file descriptor table")
by almost 2 years.
Additionally, provide a new accessor function,
`z_get_obj_lock_and_cond()`, that (optionally) gets the mutex
and condition variable associated with the provided object and
vtable.
Signed-off-by: Christopher Friedt <cfriedt@meta.com>
Coverity does not like that we are passing a pointer to a location
just beyond fixed array. Inside the function access is done through
negative indexes so there was no memory corruption but to satisfy
Coverity pointer to the last element of the array is passed and
we start from index 0 instead of -1.
Signed-off-by: Krzysztof Chruściński <krzysztof.chruscinski@nordicsemi.no>
People interested in those options may be truly concerned by binary
sizes. Let's provide complete information.
Signed-off-by: Nicolas Pitre <npitre@baylibre.com>
Compiling using clang fails with following error:
error: unannotated fall-through between switch labels
[-Werror,-Wimplicit-fallthrough]
Actually, missing 'break' statement is not an error here because
the next label is 'default' which contains 'break' only. For the same
reason we can add it to silence the compiler.
Signed-off-by: Patryk Duda <pdk@semihalf.com>
This matches the size that would be used with the newlib_nano configuration
and allows several tests to complete which would otherwise fail due to
insufficient heap space.
Signed-off-by: Keith Packard <keithp@keithp.com>
arm, arc and riscv all have special cases for malloc arena alignment that
might be smaller than the minimum required for a C allocator. In
particular, the riscv value might actually be zero, which turns out to be
an invalid alignment value.
Make sure all of these have alignment that meets the C language
requirements for allocation alignment.
Signed-off-by: Keith Packard <keithp@keithp.com>
With Zephyr now always using `int main(void)`, there's no longer any need
for this definition. The last remaining use which gated the declaration of
_posix_zephyr_main isn't necessary as adding that declaration
unconditionally is harmless.
Signed-off-by: Keith Packard <keithp@keithp.com>
We are currently reporting the wrong mismatching bits in in-between
bundles. Fix this and extend the test to cover the wrong case.
Signed-off-by: Carlo Caione <ccaione@baylibre.com>
When using the Zephyr SDK toolchain, prefer the pre-built version of
picolibc over using the picolibc module. This will reduce the time it takes
to build applications.
Signed-off-by: Keith Packard <keithp@keithp.com>
Until now iterable sections APIs have been part of the toolchain
(common) headers. They are not strictly related to a toolchain, they
just rely on linker providing support for sections. Most files relied on
indirect includes to access the API, now, it is included as needed.
Signed-off-by: Gerard Marull-Paretas <gerard.marull@nordicsemi.no>
Analog to json_obj_encode vs. json_calc_encoded_len which
calculates the object len using json_obj_encode, introduce
json_calc_encoded_arr_len which calculates the length using
json_arr_encode. That is needed when the object to be encoded
is array on the root level.
Signed-off-by: Miika Karanki <miika.karanki@vaisala.com>
For the POSIX architecture we do not define an
empty __cxa_atexit() as it otherwise would
override its host libC counterpart. And this would
both disable the atexit() hooks, and prevent possible
test code global destructors from being registered.
Signed-off-by: Alberto Escolar Piedras <alberto.escolar.piedras@nordicsemi.no>
BSD-3-Clause-UC is not a valid license name and spdx validator
generates a Warning! when detected. Most probably a typo from
old version of strtoll.c licenced as BSD-4-Clause-UC.
see commit: 570ed08
Signed-off-by: Lucian Zala <zala.lucian@gmail.com>
The malloc arena needs to be aligned to a suitable size on Risc-V, and the
Z_RISCV_STACK_GUARD_SIZE variable is a helpful proxy for what size that
is. However, that is not always a power of two, so round it up to make the
linker capable of performing the necessary allocation.
Signed-off-by: Keith Packard <keithp@keithp.com>
This function may be used by system libraries (like libstdc++), so instead
of gating compile on target language, always build this function and gate
API visibility in header files instead.
Signed-off-by: Keith Packard <keithp@keithp.com>
Not all xtensa targets define the top of usable RAM via the _heap_sentry
address; it looks like the list is limited to esp32, esp32s2, esp32s3 and
intel parts. The first three all define HAS_ESPRESSIF_HAL, so key the test
using that or SOC_FAMILY_INTEL_ADSP.
Signed-off-by: Keith Packard <keithp@keithp.com>
Instead of explicitly initializing the mutex at runtime, use
SYS_MUTEX_DEFINE to initialize it at build time instead.
Signed-off-by: Keith Packard <keithp@keithp.com>
Have eventfd Kconfig select POLL is the code utilizes the polling
API. We get a link error for tests/lib/fdtable/libraries.os.fdtable
when building on arm-clang without this.
Signed-off-by: Kumar Gala <kumar.gala@intel.com>
Enable the common malloc implementation when using picolibc. Support
existing Picolibc configurations by respecting existing PICOLIBC_HEAP_SIZE
settings.
When PICOLIBC_HEAP_SIZE is set to a value other than -2, then
*always* set COMMON_LIBC_MALLOC_ARENA_SIZE to that value.
Signed-off-by: Keith Packard <keithp@keithp.com>
When using the common malloc implementation on systems not using the
minimal C library, allocate a reasonable default malloc heap according to
the following rules (adopted from the Picolibc heap size defaults):
* When an MMU is available, allocate 16kB.
* When USERSPACE is enabled for a device with an MPU require PoT alignment,
allocate 1024 bytes
* Otherwise, use all available memory.
Signed-off-by: Keith Packard <keithp@keithp.com>
Change the default value of MINIMAL_LIBC_MALLOC_ARENA_SIZE from 0 to an
otherwise invalid value of -2. This allows the common malloc code to
distinguish between an application which explicitly sets the malloc arena
to zero bytes from an application which does not set the variable at all.
When MINIMAL_LIBC_MALLOC_ARENA_SIZE is set to a value other than -2, then
*always* set COMMON_LIBC_MALLOC_ARENA_SIZE to that value. Emit a compile
warning to let the developer know that their application is using a
deprecated Kconfig variable.
This means that MINIMAL_LIBC_MALLOC_ARENA_SIZE now always overrides
COMMON_LIBC_MALLOC_ARENA_SIZE, but an application setting both will already
be getting a configuration warning for setting the DEPRECATED value
anyways, which should serve as an adequate indication to the user.
Signed-off-by: Keith Packard <keithp@keithp.com>
When CONFIG_COMMON_LIBC_MALLOC_ARENA_SIZE is set to -1, make the malloc
arena use all remaining RAM. When an MMU exists, allocate the arena at
startup using k_mem_map. Otherwise, compute the available memory
automatically and use that.
When an MPU is being used to manage the malloc arena, make sure the heap
respects any MPU alignment requirements. Otherwise, align the heap to
sizeof(double).
Signed-off-by: Keith Packard <keithp@keithp.com>
Move the abort implementation into common so its shared among the
libc. As part of this start using the common abort on newlib.
Signed-off-by: Kumar Gala <kumar.gala@intel.com>
Move the strnlen implementation into common so its available to any
libc that may not implement strnlen.
Signed-off-by: Kumar Gala <kumar.gala@intel.com>
Introduce Kconfig symbol FULL_LIBCPP_SUPPORTED that is similar to the
C version FULL_LIBC_SUPPORTED. This way we can utilize the same
pattern in tests and samples to filter for when a full libc++ is
needed.
Signed-off-by: Kumar Gala <kumar.gala@intel.com>
The `SCHED_OTHER` scheduling priority is mandatory as part of
POSIX. It must be numerically distinct from `SCHED_FIFO`,
`SCHED_RR`, and `SCHED_SPORADIC`, but is implementation-
defined and may behave identically to `SCHED_FIFO` or
`SCHED_RR`.
Signed-off-by: Chris Friedt <cfriedt@meta.com>
Select FULL_LIBC_SUPPORTED when picolibc is available.
Add picolibc as a secondary default C library when REQUIRES_FULL_LIBC is
selected. This is necessary as tests gated on FULL_LIBC_SUPPORTED need to
be sure that a full C library will be selected -- if only picolibc is
available, those tests will need to select that.
This should permit use of a picolibc-only crosstool-ng toolchain in
testing.
Signed-off-by: Keith Packard <keithp@keithp.com>
This symbol is selected when the target has any full libc available. This
allows tests to filter on this condition. It doesn't depend on whether the
application actually selects that library, only whether requesting a full C
library would work.
Signed-off-by: Keith Packard <keithp@keithp.com>
This reflects whether newlib is available in the environment. This
symbol should be used in place of TOOLCHAIN_HAS_NEWLIB.
Signed-off-by: Keith Packard <keithp@keithp.com>
Add a prompt to the Kconfig symbol so that applications can select this in
their configuration to guide C library selection away from the minimal C
library.
Signed-off-by: Keith Packard <keithp@keithp.com>
This will (eventually) permit use of a common malloc implementation with
other C libraries, reducing the amount of Zephyr-specific code required
to support each C library.
Signed-off-by: Keith Packard <keithp@keithp.com>
This allows the C library common library to be empty if no pieces are
needed, eliminating cmake warnings.
Signed-off-by: Keith Packard <keithp@keithp.com>
Add a prompt to the Kconfig symbol so that applications can select this in
to guide C++ standard library selection towards configurations which
provide a complete implementation.
Signed-off-by: Keith Packard <keithp@keithp.com>
Add limits.h header that defines PATH_MAX as this is not defined
by the toolchain headers.
The value of 256 for PATH_MAX is based on how it is set in
lib/libc/minimal/include/limits.h.
Signed-off-by: Kumar Gala <kumar.gala@intel.com>
This ensures that the compiler won't end up recognizing patterns in code
that map to known built-in functions, like noticing that the memcpy
implementation looks a lot like a memory copy operation that could be
replaced by a call to ... memcpy.
When built with -ffreestanding, this has no effect as that option always
enables -fno-builtin.
Signed-off-by: Keith Packard <keithp@keithp.com>
When gcc is building without -fno-builtin, it will optimize calls like
printf("\n") into a call to putchar('\n'), but it won't use a static inline
in that case, instead insisting on a real function.
To make this a bit easier, adopt the usual C library practice of making
putc and putchar macros instead of static inline functions. There's no loss
of typechecking as the parameters are directly passed to underlying
functions with the same parameter types.
Signed-off-by: Keith Packard <keithp@keithp.com>
Remove statement probably left after rebase. ret should be 0 or
error codes, described in docs, and it is rewritten 4 lines below.
Signed-off-by: Andrei Emeltchenko <andrei.emeltchenko@intel.com>
In d540cf8877 I tried to optionally enable the cache management
functions in Open-AMP introducing a new CONFIG_OPENAMP_WITH_DCACHE
symbol.
This is not working. Introduce a proper fix to have this actually
working correctly as intended.
Signed-off-by: Carlo Caione <ccaione@baylibre.com>
When using the toolchain C library, that must be added to the link command
after all other libraries and modules in the system to resolve undefined
symbols.
Signed-off-by: Keith Packard <keithp@keithp.com>
Add an explicit compiler configuration, COMPILER_FREESTANDING, which
controls whether the compiler should operate in freestanding or hosted mode
(according to the C and C++ language specifications.
This depends on having a C library which conforms with the language
specification, and the minimal C library does not. Have the minimal C
library select COMPILER_FREESTANDING to continue using freestanding mode
with that library.
For other C libraries, leave this disabled by default while allowing users
to enable it if they want to go back to the previous configuration.
Signed-off-by: Keith Packard <keithp@keithp.com>
MISRA Rule 5.7 requires uniqueness of tag identifiers. Shell is
frequently problematic because many code uses `const struct shell
*shell`. This causes CI noise every time one of these shell files is
edited, so let's update all of them with `const struct shell *sh`
instead.
Signed-off-by: Gerard Marull-Paretas <gerard.marull@nordicsemi.no>
The init infrastructure, found in `init.h`, is currently used by:
- `SYS_INIT`: to call functions before `main`
- `DEVICE_*`: to initialize devices
They are all sorted according to an initialization level + a priority.
`SYS_INIT` calls are really orthogonal to devices, however, the required
function signature requires a `const struct device *dev` as a first
argument. The only reason for that is because the same init machinery is
used by devices, so we have something like:
```c
struct init_entry {
int (*init)(const struct device *dev);
/* only set by DEVICE_*, otherwise NULL */
const struct device *dev;
}
```
As a result, we end up with such weird/ugly pattern:
```c
static int my_init(const struct device *dev)
{
/* always NULL! add ARG_UNUSED to avoid compiler warning */
ARG_UNUSED(dev);
...
}
```
This is really a result of poor internals isolation. This patch proposes
a to make init entries more flexible so that they can accept sytem
initialization calls like this:
```c
static int my_init(void)
{
...
}
```
This is achieved using a union:
```c
union init_function {
/* for SYS_INIT, used when init_entry.dev == NULL */
int (*sys)(void);
/* for DEVICE*, used when init_entry.dev != NULL */
int (*dev)(const struct device *dev);
};
struct init_entry {
/* stores init function (either for SYS_INIT or DEVICE*)
union init_function init_fn;
/* stores device pointer for DEVICE*, NULL for SYS_INIT. Allows
* to know which union entry to call.
*/
const struct device *dev;
}
```
This solution **does not increase ROM usage**, and allows to offer clean
public APIs for both SYS_INIT and DEVICE*. Note that however, init
machinery keeps a coupling with devices.
**NOTE**: This is a breaking change! All `SYS_INIT` functions will need
to be converted to the new signature. See the script offered in the
following commit.
Signed-off-by: Gerard Marull-Paretas <gerard.marull@nordicsemi.no>
init: convert SYS_INIT functions to the new signature
Conversion scripted using scripts/utils/migrate_sys_init.py.
Signed-off-by: Gerard Marull-Paretas <gerard.marull@nordicsemi.no>
manifest: update projects for SYS_INIT changes
Update modules with updated SYS_INIT calls:
- hal_ti
- lvgl
- sof
- TraceRecorderSource
Signed-off-by: Gerard Marull-Paretas <gerard.marull@nordicsemi.no>
tests: devicetree: devices: adjust test
Adjust test according to the recently introduced SYS_INIT
infrastructure.
Signed-off-by: Gerard Marull-Paretas <gerard.marull@nordicsemi.no>
tests: kernel: threads: adjust SYS_INIT call
Adjust to the new signature: int (*init_fn)(void);
Signed-off-by: Gerard Marull-Paretas <gerard.marull@nordicsemi.no>
Add string.h header that declerates prototype for strnlen()
as this is not provided by the toolchain headers.
Add strings.h to allow anything that expects strncasecmp() to
be defined there to build correctly. The arm toolchain actually
defines strncasecmp() in <string.h> so we just have <strings.h>
include <string.h>.
Signed-off-by: Kumar Gala <kumar.gala@intel.com>
* Move 'struct _timespec' into sys/_timespec.h as expected by
<posix/time.h>.
* Introduce 'struct timeval' in sys/_timeval.h as expected by
<posix/time.h>.
* Add mode_t to <sys/types.h> as expected by <posix/stat.h>
Signed-off-by: Kumar Gala <kumar.gala@intel.com>
Various headers include <sys/cdefs.h> like zephyr/posix/sys/stat.h.
When building with the arm-clang toolchain we utilize armstdc
so we need an empty cdefs.h similar to what minimal libc has so
things will build.
Signed-off-by: Kumar Gala <kumar.gala@intel.com>
We get compile warnings of the form:
error: converting the result of
'<<' to a boolean; did you mean
'((__aeabi_ctype_table_ + 1)[(byte)] << 28) != 0'?
[-Werror,-Wint-in-bool-context]
if (!isprint(byte)) {
^
Since isprint (and the other is* functions) return an int, change check
to an explicit test against the return value.
Signed-off-by: Kumar Gala <kumar.gala@intel.com>
We get compile warnings of the form:
error: converting the result of
'<<' to a boolean; did you mean
'((__aeabi_ctype_table_ + 1)[(byte)] << 28) != 0'?
[-Werror,-Wint-in-bool-context]
if (!isprint(byte)) {
^
Since isprint (and the other is* functions) return an int, change check
to an explicit test against the return value.
Signed-off-by: Kumar Gala <kumar.gala@intel.com>
Introduce a place to share implementations of libc functions that
are needed by different libc versions. Place time() in this common
location so it can be shared when building for either minimal libc or
armclang libc.
Signed-off-by: Kumar Gala <kumar.gala@intel.com>
* add opening and closing braces around several blocks
* convert dos line endings to unix
* move assignments out of conditionals
* ensure adequate spacing after control blocks
Signed-off-by: Chris Friedt <cfriedt@meta.com>
* Add a flexible Hashmap API
* Add a Separate-Chaining Hashmap Implementation
* Add a Open-Addressing Linear Probe Hashmap Implementation
* Add a C-Wrapper for `std::unordered_map` for benchmarking
Signed-off-by: Chris Friedt <cfriedt@meta.com>
Changed incrementing `for` loop counters to `size_t` from `int` to
eliminate warning, "warning: comparison of integer expressions of
different signedness: 'uint32_t' {aka 'unsigned int'} and 'int'
[-Wsign-compare]"
Signed-off-by: Zachary J. Fields <zachary_fields@yahoo.com>
Changed incrementing `for` loop counters to `size_t` from `int` to
eliminate warning, "warning: comparison of integer expressions of
different signedness: 'uint32_t' {aka 'unsigned int'} and 'int'
[-Wsign-compare]"
Signed-off-by: Zachary J. Fields <zachary_fields@yahoo.com>
Disable tests/kernel/mem_protect/syscalls for qemu_arc_em where
we trigger ARC QEMU bug which cause illegal instruction exception
on perfectly valid ARC code.
Signed-off-by: Eugeniy Paltsev <Eugeniy.Paltsev@synopsys.com>
Signed-off-by: Evgeniy Paltsev <PaltsevEvgeniy@gmail.com>
This is a workaround for a compiler bug on (at least) GCC 12.1.0 in
Zephyr SDK 0.15.1. The optimizer generates this function with a last
instruction that is an unconditional branch (a tail call into the
chunk_set() handling). But that means that the NEXT instruction gets
decoded as part of the branch delay slot, but that instruction isn't
part of this function! Some instructions aren't legal in branch delay
slots. One of those is ENTER_S, which is a very common entry
instruction for whatever function the linker places after us. It
seems like the compiler doesn't understand this problem. Stuff a NOP
in to guarantee the code is legal.
Comment above is duplicated in the code. The workaround is
straightforward once the issue is understood, but the path to get here
was hilariously weird.
Fixes#54720
Signed-off-by: Andy Ross <andyross@google.com>
Clang support still work in progress in zephyr. So for now enable only
on gcc based toolchains.
We should enable this back for more toolchains once we have full clang
support and are able to verify.
Signed-off-by: Anas Nashif <anas.nashif@intel.com>
With all of the test suite issues on this board fixed, qemu_x86_tiny should
now be usable with picolibc.
Signed-off-by: Keith Packard <keithp@keithp.com>
Picolibc now supports all of the Zephyr SDK target architectures for C.
qemu_x86_tiny needs fixes to get the libc partition linked
into the right spot. See issue #54148
Signed-off-by: Keith Packard <keithp@keithp.com>
The limiting factor is the output bitmask that says which elements have
been filled in by the parser. This patch changes the bitmask type from int
to int64_t.
Signed-off-by: Björn Stenberg <bjorn@haxx.se>
Although the eventfd API is not (yet) a part of POSIX,
it's pretty well ubiquitous on POSIX systems now.
Enable it by default when `CONFIG_POSIX_API=y`.
Signed-off-by: Chris Friedt <cfriedt@meta.com>
The `getopt()` function is part of POSIX and should be
available when applications choose to enable general POSIX
API support.
Signed-off-by: Chris Friedt <cfriedt@meta.com>
With the `<zephyr/posix/...> prefix, it became
exponentially more difficult to integrate 3rd-party
libraries that depend on the POSIX API.
Standard POSIX headers should be available in standard
include paths - and that should most certainly the case
when `CONFIG_POSIX_API=y`.
With this change:
* When `CONFIG_POSIX_API=y`
- applications have explicitly chosen to use
POSIX APIs.
- all standard POSIX includes are in the default
include path.
* When `CONFIG_POSIX_API=n`
- applications *may* include POSIX headers
explicitly with the namespaced prefix
- e.g. `#include <zephyr/posix/unistd.h>`
- individual Kconfig options can be used to
enable POSIX features selectively, such as
`getopt` or `eventfd`.
Signed-off-by: Chris Friedt <cfriedt@meta.com>
Refactor sys_clock_disable not implemented behavior.
This follows the coding guidelines
Rule A.1: Conditional Compilation:
Do not conditionally compile function declarations in header files.
Signed-off-by: Joakim Andersson <joakim.andersson@nordicsemi.no>
libstdc++ is supported with Picolibc only when the toolchain version of
Picolibc is use -- libstdc++ must be built using a specific Picolibc build
and libstdc++ is included with the toolchain.
Ideally, we'd allow the use of the Picolibc module whenever we weren't
using the GNU libstdc++, including when using the minimal libc++. However,
the obvious dependency settings create a loop:
config PICOLIBC
depends on PICOLIBC_SUPPORTED
config PICOLIBC_SUPPORTED
depends on !(GLIBCXX_LIBCPP && "$(ZEPHYR_TOOCHAIN_VARIANT" = "zephyr")
config GLIBCXX_LIBCPP
depends on NEWLIB_LIBC || PICOLIBC
To break this loop, we replace GLIBCXX_LIBCPP in the second block with
CPP:
config PICOLIBC_SUPPORTED
depends on !(CPP && "$(ZEPHYR_TOOCHAIN_VARIANT" = "zephyr")
This means that picolibc cannot be used with any C++ apps when using the
Zephyr SDK, even when not using the GNU libstdc++. However, Zephyr SDK 0.16
will come with an additional Kconfig file that includes:
config PICOLIBC_SUPPORTED
def_bool y
depends on "$(ZEPHYR_TOOLCHAIN_VARIANT)" = "zephyr"
This will override the Kconfig bits included in Zephyr and allow use of the
Picolibc module with C++ code, including using the minimal libc++ bits.
Signed-off-by: Keith Packard <keithp@keithp.com>
This ensures that all pending writes are committed. This is relevant for
flags in .noinit SRAM that are read back after reset.
Signed-off-by: Armin Brauns <armin.brauns@embedded-solutions.at>
This commit reworks the C++ standard library configurations such that:
* the separation between the Zephyr minimal C++ library and the fully
featured C++ standard libraries, such as GNU libstdc++, is clear.
This is done by deprecating the Kconfig `CONFIG_LIB_CPLUSPLUS`
symbol, which implies that the minimal C++ library is selected when
set to `n`, and introducing the `CONFIG_MINIMAL_LIBCPP` symbol.
* the type of the selected C++ standard library is clear. This is done
by introducing a Kconfig choice, `LIBCPP_IMPLEMENTATION`, for the C++
standard library type and providing the choice symbols for each
library type supported, such as `CONFIG_MINIMAL_LIBCPP` and
`CONFIG_GLIBCXX_LIBCPP`.
Signed-off-by: Stephanos Ioannidis <stephanos.ioannidis@nordicsemi.no>
The Kconfig `CONFIG_RTTI` symbol enables the C++ Run-Time Type
Information (RTTI) support and is a feature of the standard C++
library; therefore, it should be prefixed with `CPP_` as with the rest
of the C++-specific symbols.
This commit renames the Kconfig `CONFIG_RTTI` symbol to
`CONFIG_CPP_RTTI` in order to better align with the other existing C++
Kconfig symbols, and deprecates the old `CONFIG_RTTI` symbol.
Signed-off-by: Stephanos Ioannidis <stephanos.ioannidis@nordicsemi.no>
`CONFIG_EXCEPTIONS` is ambiguous in that the word "exception" may be
used to refer to many different types of exceptions, from the hardware
generated faults and interrupts (aka. exceptions) to the C++
exceptions.
This commit renames the Kconfig `CONFIG_EXCEPTIONS` symbol to
`CONFIG_CPP_EXCEPTIONS` in order to clarify that the symbol refers to
the C++ exceptions and eliminate any ambiguity, and deprecates the old
`CONFIG_EXCEPTIONS` symbol.
Signed-off-by: Stephanos Ioannidis <stephanos.ioannidis@nordicsemi.no>
This commit updates all in-tree code to use `CONFIG_CPP` instead of
`CONFIG_CPLUSPLUS`, which is now deprecated.
Signed-off-by: Stephanos Ioannidis <stephanos.ioannidis@nordicsemi.no>
There is no reason for the top-level C++ Kconfig symbol to be called
`CPLUSPLUS` when the convention used throughout the Zephyr codebase is
to use "cpp" to refer to C++ and the rest of the C++-related Kconfig
symbols are prefixed with `CPP_`.
This commit renames the Kconfig `CPLUSPLUS` symbol to `CPP` in order to
better align with the de-facto standard naming convention used throughout
the Zephyr codebase, and deprecates the old `CPLUSPLUS` symbol.
Signed-off-by: Stephanos Ioannidis <stephanos.ioannidis@nordicsemi.no>
This commit relocates the "C++ minimal library" components, that
implement a very limited subset of the standard C++ library, to a
dedicated directory, `lib/cpp/minimal`, in order to provide a clear
separation among the different C++ library components.
After this refactoring, the top `lib/cpp` directory should only contain
the sub-directories for each C++ library (i.e. `abi`, `minimal`). In
the future, a C++ library-specific shim layer implementation may be
added as sub-directories under `lib/cpp` as well (e.g. `libstdc++`
sub-directory containing the shim layer implementation for the GCC
libstdc++ library) -- this is similar to how the libc directories are
structured under `lib/libc`.
Signed-off-by: Stephanos Ioannidis <stephanos.ioannidis@nordicsemi.no>
This commit relocates the "C++ ABI library" components such as
global constructor/destructor and initialiser handlers to a dedicated
directory, `lib/cpp/abi`, in order to provide a clear separation
between the C++ ABI/runtime library and the standard C++ library
components.
Note that the Zephyr C++ ABI library currently implements the GNU/GCC
C++ ABI, which is the de-facto standard ABI used by many compilers
including Clang -- it may be necessary to sub-divide the `lib/cpp/abi`
into `lib/cpp/abi/gnu` and `lib/cpp/abi/someotherabi` in the future
when adding the support for a C++ compiler that expects an ABI vastly
different from the GNU C++ ABI.
Signed-off-by: Stephanos Ioannidis <stephanos.ioannidis@nordicsemi.no>
This commit moves the files under `subsys/cpp` directory to the
`lib/cpp` directory because the C++ ABI runtime library and the
standard C++ library components are not a "subsystem" (aka. API) in
conventional sense and is better described as a "library."
Classifying the C++ ABI runtime library and the standard C++ library as
"libraries" instead of "subsystems" also better aligns with how the
existing C standard library implementation (`lib/libc`) is handled.
Signed-off-by: Stephanos Ioannidis <stephanos.ioannidis@nordicsemi.no>
After fcntl.h moved to posix, there have a compiler note
on fdtable.c. As suggested in fcntl.h, instead with
zephyr/posix/fcntl.h.
Signed-off-by: HaiLong Yang <hailong.yang@brainco.cn>
The remaining types that needed to be harmonized between
Newlib and Zephyr's POSIX definitions are:
* `struct sched_param`
- don't re-define if using minimal libc
* `pthread_attr_t`
- convert to `struct pthread_attr`
- define type if using minimal libc
- assert acceptible object size
* `pthread_mutexattr_t`
- convert to `struct pthread_mutexattr`
- define type if using minimal libc
- assert acceptible object size
* `pthred_condattr_t`
- convert to `struct pthread_condattr`
- define type if using minimal libc
- assert acceptible object size
* `pthread_once_t`
- adopt newlib definition
- define type if using minimal libc
Signed-off-by: Chris Friedt <cfriedt@meta.com>
Define `PTHREAD_CREATE_DETACHED` and
`PTHREAD_CREATE_JOINABLE` to be compatible with the Newlib
definitions.
This is a temporary workaround for #51211 until Newlib
headers are pulled in.
Signed-off-by: Chris Friedt <cfriedt@meta.com>
The `fcntl.h` header has never been a part of ISO C so move it to
`include/zephyr/posix`.
To ensure a smooth migration, a header was left in
`lib/libc/minimal/include` that prints a deprecation warning.
Users should either include `<zephyr/posix/fcntl.h>` or switch to
`CONFIG_POSIX_API=y`.
Signed-off-by: Chris Friedt <cfriedt@meta.com>
The `sys/stat.h` header has never been a part of ISO C so move it
to `zephyr/include/posix/sys/`.
To ensure a smooth migration, leave a stub header in
`lib/libc/minimal/include/sys/` that prints a deprecation warning
suggesting developers either include `<zephyr/posix/sys/stat.h>`
or use `CONFIG_POSIX_API=y`.
Signed-off-by: Chris Friedt <cfriedt@meta.com>
The previous method used to calculate seconds in `clock_gettime()`
seemed to have an inaccuracy that grew with time causing the
seconds to be off by an order of magnitude when ticks would roll
over.
This change fixes the method used to calculate seconds.
Signed-off-by: Chris Friedt <cfriedt@meta.com>
Fixed issues which were leading to failures when producing
and consuming is preempted at various stages.
Signed-off-by: Krzysztof Chruscinski <krzysztof.chruscinski@nordicsemi.no>
Use flag instead of word in the buffer. Using this method allows
to dedicate full buffer capacity for data.
Signed-off-by: Krzysztof Chruscinski <krzysztof.chruscinski@nordicsemi.no>
should be able to configure the time spent waiting
for available resources when calling timer_create()
to not cause a hiccup in applications that require
faster response times than the original hard-coded 100 ms.
Signed-off-by: Nicholas Lowell <nlowell@lexmark.com>
Currently OpenAMP is unconditionally compiled with the options to use
the vrings cache operations disabled.
Add a new CONFIG_OPENAMP_WITH_DCACHE Kconfig option to enable the
support for d-cache operations in OpenAMP when needed.
Signed-off-by: Carlo Caione <ccaione@baylibre.com>
This commit updates the Picolibc configurations to remove any
unnecessary defaults and dependencies and conform to the de-facto
standard convention across the Zephyr repository.
Signed-off-by: Stephanos Ioannidis <stephanos.ioannidis@nordicsemi.no>
This commit relocates the newlib libc configurations under the top-
level libc Kconfig to a new Kconfig under `lib/libc/newlib` for
improved organisation of the libc configurations.
Signed-off-by: Stephanos Ioannidis <stephanos.ioannidis@nordicsemi.no>
This commit relocates the minimal libc configurations under the top-
level libc Kconfig to a new Kconfig under `lib/libc/minimal` for
improved organisation of the libc configurations.
Signed-off-by: Stephanos Ioannidis <stephanos.ioannidis@nordicsemi.no>
This commit cleans up the top `CMakeLists.txt` for the libc directory
to use `add_subdirectory_ifdef` in order to make the code more
readable.
Signed-off-by: Stephanos Ioannidis <stephanos.ioannidis@nordicsemi.no>
This commit properly writes back cached read pointer in spsc buffer
when freeing the memory.
Signed-off-by: Radoslaw Koppel <radoslaw.koppel@nordicsemi.no>
This commit updates the Newlib integration to define `_ANSI_SOURCE`
in order to prevent Newlib from defining POSIX primitives in its
headers when GNU dialect is used (`-std=gnu*`).
Newlib `features.h` defines `_DEFAULT_SOURCE` when `__STRICT_ANSI__`
is not defined by GCC (i.e. when `-std=gnu*`), which results in the
Newlib headers defining POSIX primitives that are in conflict with the
POSIX primitives defined by Zephyr.
Newlib must not define POSIX primitives unless the feature test macros
such as `_POSIX_SOURCE`, `_GNU_SOURCE` and `_DEFAULT_SOURCE` are
explicitly defined.
Note that `-std=gnu` does not imply `_GNU_SOURCE` or `_DEFAULT_SOURCE`
because it is only supposed to instruct the compiler to use the GNU C
language dialect (i.e. GNU C language extensions).
Refer to the GitHub issue #52739 for more details.
Signed-off-by: Stephanos Ioannidis <stephanos.ioannidis@nordicsemi.no>
Declarations for `getopt()` should be in `<unistd.h>`
according to the spec. The extended versions `getopt_long()`
and `getopt_long_only()` are declared in `<getopt.h>`.
Signed-off-by: Chris Friedt <cfriedt@meta.com>
This seems to have caused build failures in spite of CI being
green in PR 52653.
This reverts commit fc92eb1b37.
Signed-off-by: Chris Friedt <cfriedt@meta.com>
Declarations for `getopt()` should be in `<unistd.h>`
according to the spec. The extended versions `getopt_long()`
and `getopt_long_only()` are declared in `<getopt.h>`.
Signed-off-by: Chris Friedt <cfriedt@meta.com>
There are several Zephyr shell commands that are used for
transferring data over a possibly unreliable connection such as a
UART into either memory or flash. For example, `flash load` and
`devmem load`.
Make the CRC functions available so that they can be used to
verify the integrity of data transferred over possibly
unreliable connections.
Signed-off-by: Chris Friedt <cfriedt@meta.com>
The original implementation of `usleep()` was not compliant
to the POSIX spec in 3 ways.
- calling thread may not be suspended (because `k_busy_wait()`
was previously used for short durations)
- if `usecs` > 1000000, previously we did not return -1 or set
`errno` to `EINVAL`
- if interrupted, previously we did not return -1 or set
`errno` to `EINTR`
This change addresses those issues to make `usleep()` more
POSIX-compliant.
Signed-off-by: Chris Friedt <cfriedt@meta.com>
In the case that `sleep()` is interrupted, the POSIX spec requires
it to return the number of "unslept" seconds (i.e. the number of
seconds requested minus the number of seconds actually slept).
Since `k_sleep()` already returns the amount of "unslept" time
in ms, we can simply use that.
Signed-off-by: Chris Friedt <cfriedt@meta.com>
Consistent with the change of `pthread_t`, `pthread_mutex_t`,
and `pthread_cond_t` to `uint32_t`, we can now also abstract
`pthread_key_t` as `uint32_t` and separate the implementation
detail, hidden from POSIX API consumers.
This change introduces `CONFIG_MAX_PTHREAD_KEY_COUNT`.
Signed-off-by: Chris Friedt <cfriedt@meta.com>
None of the operations that `pthread_key_sem` protected were
blocking, so simply make it a spinlock.
Also made the lock static.
Signed-off-by: Chris Friedt <cfriedt@meta.com>
Add CONFIG_CRC for building CRC related routines.
CRC routines are now being built for each application, whether used or
not and are add in the build system unconditionally.
Keep CONFIG_CRC enabled by default for now and until all users have
converted to use the new option.
Partial fix for #50654
Signed-off-by: Anas Nashif <anas.nashif@intel.com>
Consistent with the change of `pthread_t` from
`struct posix_thread` to `uint32_t`, we can now also abstract
`pthread_cond_t` as `uint32_t` and separate `struct posix_cond`
as an implementation detail, hidden from POSIX API consumers.
This change deprecates `PTHREAD_COND_DEFINE()` in favour of the
(standardized) `PTHREAD_COND_INITIALIZER`.
This change introduces `CONFIG_MAX_PTHREAD_COND_COUNT`.
Signed-off-by: Chris Friedt <cfriedt@meta.com>
Previously, `pthread_cond_init()` could not actually fail, and
destroying condition variables was a no-op, and it was missing
in `pthread_exit()`.
However, with the change of `pthread_cond_t` to `uint32_t`, and
since those are embedded inside of `struct posix_thread` for the
time being, the pthread code needs to keep track that it is
relinquishes used condition variables when a thread completes.
Signed-off-by: Chris Friedt <cfriedt@meta.com>
Previously `PTHREAD_MUTEX_MASK_INIT` was used to mark a
`pthread_mutex_t` as initialized.
The same needs to be done for `pthread_cond_t` and likely others.
Rather than copy-pasting that and a number of inlines that
duplicate the same functionality, simply make it more generic.
Signed-off-by: Chris Friedt <cfriedt@meta.com>
Consistent with the change of `pthread_t` from
`struct posix_thread` to `uint32_t`, we can now also abstract
`pthread_mutex_t` as `uint32_t` and separate `struct posix_mutex`
as an implementation detail, hidden from POSIX API consumers.
This change deprecates `PTHREAD_MUTEX_DEFINE()` in favour of the
(standardized) `PTHREAD_MUTEX_INITIALIZER`.
This change introduces `CONFIG_MAX_PTHREAD_MUTEX_COUNT`.
Signed-off-by: Chris Friedt <cfriedt@meta.com>
Previously, `pthread_mutex_init()` could not actually fail, and
destroying mutexes was a no-op, so it was missing in a couple of
places.
However, with the change of `pthread_mutex_t` to `uint32_t`, and
since those are embedded inside of `struct posix_thread` for the
time being, the pthread code needs to keep track that it is
relinquishes used mutex resources when a thread completes.
Signed-off-by: Chris Friedt <cfriedt@meta.com>
The `pthread_create()` function is not a cancellation point and
iterating over / mutating `posix_thread_pool` is not a blocking
operation, so use a spinlock for the internal `pthread_pool_lock`.
Signed-off-by: Chris Friedt <cfriedt@meta.com>
The `struct pthread` and `enum pthread_state` are actually
implementation details specific to Zephyr.
Let's limit the scope where that level of detail is visible.
Signed-off-by: Chris Friedt <cfriedt@meta.com>
In the interest of reducing any layering concerns,
avoid using POSIX locking primitives where necessary.
Note: it is not safe to use a spinlock here, as the
callback function to `pthread_once()` may itself be
a cancellation point.
Signed-off-by: Chris Friedt <cfriedt@meta.com>
While reviewing the dependency between Picolibc POSIX APIs and Zephyr, I
found that the picolibc libc-hooks code copied a bunch of functions from
the newlib version which weren't needed. This required replacing a few
calls to the (now removed) '_write' hook with printk instead.
Signed-off-by: Keith Packard <keithp@keithp.com>
Several other widely-used pthread implementations
abstract `pthread_t` as `uint32_t`. The benefit
there is that we avoid passing around a pointer to
an internal structure (implementation detail).
Additionally, this removes the alias from `k_tid_t`
to `pthread_t` inside of `struct pthread_mutex`.
Signed-off-by: Chris Friedt <cfriedt@meta.com>
Move runtime checks to use arch_num_cpus(). This is to allow
runtime determination of the number of CPUs in the future.
Signed-off-by: Kumar Gala <kumar.gala@intel.com>
This adds the necessary modifier to the stdin/stdout/stderr
variables in picolib, and putting into the z_libc_partition.
This allows userspace applications to utilize these variables
for console I/O.
Fixes#51343
Signed-off-by: Daniel Leung <daniel.leung@intel.com>
Compliance check complains about static not being the first
modifier. So move them so there are no more complains
in the future.
Signed-off-by: Daniel Leung <daniel.leung@intel.com>
The newlib nano variant is currently enabled by default when
`CONFIG_NEWLIB_LIBC=y` and the selected toolchain-architecture
combination includes the newlib nano variant support, even if
`CONFIG_NEWLIB_LIBC_NANO` is not selected by the user.
When `CONFIG_NEWLIB_LIBC=y`, this results in the newlib nano variant
being selected for some architectures (e.g. ARC, ARM and RISC-V), while
the full variant is selected for the rest of the architectures.
The above behaviour is problematic because there exist functional
differences between the newlib full and nano variants (e.g. C99 format
modifiers such as `hh`, `ll`, `z`, `j` and `t` are not available in the
newlib nano variant), and this effectively leads to different level of
C standard support across different architectures when
`CONFIG_NEWLIB_LIBC=y`.
This commit fixes this problem by making the `CONFIG_NEWLIB_LIBC_NANO`
not `default y` and requiring its user to explicitly set this symbol to
`y` when they want to use the newlib nano variant.
Signed-off-by: Stephanos Ioannidis <stephanos.ioannidis@nordicsemi.no>
Add a new Kconfig and build this code conditionally, so we do not end up
with this file being built for each zephyr app.
Partial fix for #50654
Signed-off-by: Anas Nashif <anas.nashif@intel.com>
Extend capabilities of a minimal libc to support C11 capability
to allocate memory with requested alignment.
Signed-off-by: Piotr Pryga <piotr.pryga@nordicsemi.no>
The picolibc heap size configuration (`CONFIG_PICOLIBC_HEAP_SIZE`) is
used to set the statically allocated malloc heap size when userspace is
enabled.
The current default heap size of 1048576 bytes (MMU) and 65536 bytes
(MPU) is too large for most platforms that Zephyr supports and may
result in the picolibc tests being filtered out due to the increased
memory footprint of the compiled image (i.e. SRAM overflow).
This commit updates the default picolibc heap size to a more reasonable
16384 bytes for MMU platforms and 1024 bytes for MPU platforms.
Signed-off-by: Stephanos Ioannidis <stephanos.ioannidis@nordicsemi.no>
Add build assert to make sure _RETARGETABLE_LOCKING is enabled in
toolchain, When _RETARGETABLE_LOCKING is enabled, "_LOCK_T" is "__lock"
pointer type, otherwise "_LOCK_T" is "int" type, so there will be the
following compile warnings when toolchain doesn't enable
_RETARGETABLE_LOCKING:
zephyr/lib/libc/newlib/libc-hooks.c:416:13: warning: cast to pointer from
integer of different size [-Wint-to-pointer-cast]
416 | k_sem_take((struct k_sem *)lock, K_FOREVER);
| ^
zephyr/lib/libc/newlib/libc-hooks.c: In function '__retarget_lock_acquire
_recursive':
zephyr/lib/libc/newlib/libc-hooks.c:423:15: warning: cast to pointer from
integer of different size [-Wint-to-pointer-cast]
423 | k_mutex_lock((struct k_mutex *)lock, K_FOREVER);
| ^
...
Signed-off-by: Jiafei Pan <Jiafei.Pan@nxp.com>
When CONFIG_POSIX_CLOCK is enabled, we should have implementation
of gettimeofday() and therefore time(NULL) should return correct
time, instead of -1.
Signed-off-by: Seppo Takalo <seppo.takalo@nordicsemi.no>
Static packaging is using only argument types to build a package. There
is one case where analysing argument type only is not enough to
determine package content. That is %p with (unsigned) char pointer vs
%s. In case of %s a string might need to be appended to the package
and in case of %p it must be avoided. Format string analysis is required
to distinguish those two cases.
In order to speed up the runtime inspection, additional information is
added to a static package. That is index of the string argument (where
first argument has index 0). This information allows quick format string
inspection where nth format specifier is found and checked if it is a
pointer format specifier.
Inspection algorithm is added to cbprintf_package_convert() and if %p
is found then data for that argument is discarded. Additionally, log
warning is printed with suggestion to cast pointer argument to void *
to avoid confusion. It is desired to get rid of this ambiguity because
there are going to be logging configurations where strings are stripped
from a binary and runtime inspection cannot be performed.
Signed-off-by: Krzysztof Chruscinski <krzysztof.chruscinski@nordicsemi.no>
As of today <zephyr/zephyr.h> is 100% equivalent to <zephyr/kernel.h>.
This patch proposes to then include <zephyr/kernel.h> instead of
<zephyr/zephyr.h> since it is more clear that you are including the
Kernel APIs and (probably) nothing else. <zephyr/zephyr.h> sounds like a
catch-all header that may be confusing. Most applications need to
include a bunch of other things to compile, e.g. driver headers or
subsystem headers like BT, logging, etc.
The idea of a catch-all header in Zephyr is probably not feasible
anyway. Reason is that Zephyr is not a library, like it could be for
example `libpython`. Zephyr provides many utilities nowadays: a kernel,
drivers, subsystems, etc and things will likely grow. A catch-all header
would be massive, difficult to keep up-to-date. It is also likely that
an application will only build a small subset. Note that subsystem-level
headers may use a catch-all approach to make things easier, though.
NOTE: This patch is **NOT** removing the header, just removing its usage
in-tree. I'd advocate for its deprecation (add a #warning on it), but I
understand many people will have concerns.
Signed-off-by: Gerard Marull-Paretas <gerard.marull@nordicsemi.no>
At some point, package copy function was extended and renamed
to cbprintf_package_convert. However, flags used by this
function were not renamed and used contained COPY idiom.
Deprecating flags with COPY and replacing them with flags
with CONVERT idiom to match function which is utilizing them.
Signed-off-by: Krzysztof Chruscinski <krzysztof.chruscinski@nordicsemi.no>
Minor cleanup in allocation function. Using define instead of
sizeof(uint32_t) to better explain the purpose. Adding few
comments.
Signed-off-by: Krzysztof Chruscinski <krzysztof.chruscinski@nordicsemi.no>
Allocator is adding padding in 2 steps. First padding mark is written
to the buffer and then write index is reset to 0. Consumer may interrupt
this operation (another thread or core) and fail since it was only checking
padding marker and that alone was enough to consume the padding. If that
happen before write index got updated, buffer reading become corrupted.
Fixing it by adding write index check when padding is found.
Signed-off-by: Krzysztof Chruscinski <krzysztof.chruscinski@nordicsemi.no>
Wrong value was used for free space calculation. Updating test which
previously was hiding this bug.
Signed-off-by: Krzysztof Chruscinski <krzysztof.chruscinski@nordicsemi.no>
Wire this up the same way ASAN works. Right now it's support only by
recent clang versions (not gcc), and only in 64 bit mode. But it's
capable of detecting uninitialized data reads, which ASAN is not.
This support is wired into the sys_heap (and thus k_heap/k_malloc)
layers, allowing detection of heap misuse like use-after-free. Note
that there is one false negative lurking: due to complexity, in the
case where a sys_heap_realloc() call is able to shrink memory in
place, the now-unused suffix is not marked uninitialized immediately,
making it impossible to detect use-after-free of those particular
bytes. But the system will recover cleanly the next time the memory
gets allocated.
Also no attempt was made to integrate this handling into the newlib or
picolibc allocators, though that should hopefully be possible via
similar means.
Signed-off-by: Andy Ross <andyross@google.com>
The `off_t` type, which is specified by the POSIX standard as a signed
integer type representing file sizes, was defined as `long` or `int`
depending on the target architecture without a clear explanation on why
it was defined as such.
While the POSIX standard does not specify the size requirement of the
`off_t` type, it generally corresponds to the size of a pointer in
practice, mainly because the optimal file handling size is closely tied
to the native pointer size.
For this reason, this commit removes the per-architecture `off_t`
definition and defines it as `intptr_t` such that its size always
matches the native pointer size.
Note that the toolchain-defined `__INTPTR_TYPE__` macro is used instead
of the `intptr_t` typedef as per the common convention used in the C
standard library headers.
Signed-off-by: Stephanos Ioannidis <root@stephanos.io>
The cbprintf formatter cbvprintf_exteral_formatter_func has a typo
in it with a missing 'n'. So add it.
Signed-off-by: Daniel Leung <daniel.leung@intel.com>
Currently picolib isn't compatible with ARC MWDT toolchain,
so don't try to build picolib tests in case of ARC MWDT toolchain
usage.
Signed-off-by: Eugeniy Paltsev <Eugeniy.Paltsev@synopsys.com>
Signed-off-by: Evgeniy Paltsev <PaltsevEvgeniy@gmail.com>
If the architecture has TLS support, but the toolchain doesn't, then
don't enable Zephyr TLS support when selecting picolibc.
Closes: #47275.
Signed-off-by: Keith Packard <keithp@keithp.com>
When the heap is of a fixed size and there isn't a special malloc partition
in use, place the heap in uninitialized memory so that the application
doesn't spend time at startup erasing it. Picolibc malloc always clears
memory before returning it to applications, so this change will not be
visible to applications.
Signed-off-by: Keith Packard <keithp@keithp.com>
There is a spinlock used in the EFI console code for printing
one line string. It already made the log output being in order
under multi-cores, so it doesn't need a printk sync spinlock
again. Disable it while using EFI console as a log backend.
Fixes#47512.
Signed-off-by: Enjia Mai <enjia.mai@intel.com>
Fixing bug in free space calculation which was assuming 1 byte
padding and not 32 bit word padding. Bug could result in the
data corruption in certain scenario.
Signed-off-by: Krzysztof Chruscinski <krzysztof.chruscinski@nordicsemi.no>
xcc compiler complains about how fdtable variable is initialized:
"""
warning: missing braces around initialize
"""
Signed-off-by: Flavio Ceolin <flavio.ceolin@intel.com>
Use CONFIG_DCACHE_LINE_SIZE to determine distance between
fields modified by different cores.
Add option which specifies what is the data cache line
of the remote core. Maximum from local and remote cache
line sizes is used as distance and alignement.
Signed-off-by: Krzysztof Chruscinski <krzysztof.chruscinski@nordicsemi.no>
Any project with Kconfig option CONFIG_LEGACY_INCLUDE_PATH set to n
couldn't be built because some files were missing zephyr/ prefix in
includes
Re-run the migrate_includes.py script to fix all legacy include paths
Signed-off-by: Tomislav Milkovic <milkovic@byte-lab.com>
add a sys_mem_blocks_is_region_free procedure to test
if the block in question is free or taken
Signed-off-by: Marcin Szkudlinski <marcin.szkudlinski@intel.com>
Signed-off-by: Tomasz Leman <tomasz.m.leman@intel.com>
Since the retrieved heap memory statistics are identical to those of
the retrieved mem_block statistics, it makes sense to use a single
generic-named structure for both instead of two identical structures
with different names.
Signed-off-by: Peter Mitsis <peter.mitsis@intel.com>
Both the current and maximum number of allocations in a given memory
blocked are tracked (and can be queried) when the
CONFIG_SYS_MEM_BLOCKS_RUNTIME_STATS Kconfig option is selected.
Signed-off-by: Peter Mitsis <peter.mitsis@intel.com>
If a thread is joined using `pthread_join()`, then the
internal state would be set to `PTHREAD_EXITED`.
Previously, `pthread_create()` would only consider pthreads
with internal state `PTHREAD_TERMINATED` as candidates for new
threads. However, that causes a descriptor leak.
We should be able to reuse a single thread an infinite number
of times.
Here, we also consider threads with internal state
`PTHREAD_EXITED` as candiates in `pthread_create()`.
Fixes#47609
Signed-off-by: Christopher Friedt <cfriedt@fb.com>
Move scripts needed by the build system and not designed to be run
individually or standalone into the build subfolder.
Signed-off-by: Anas Nashif <anas.nashif@intel.com>
In C++ applications, methods which are meant to be implemented in C
should be wrapped in a `extern "C"` scope at the point of declaration.
This enables the correct symbol table mangling, which fixes current
linker errors in C++.
Signed-off-by: Alexander Dengg <dornbirndevelops@gmail.com>
Following zephyr's style guideline, all if statements, including single
line statements shall have braces.
Signed-off-by: Anas Nashif <anas.nashif@intel.com>
This commit changes the invocation of the picolibc malloc heap
initialisation function such that it is executed during the POST_KERNEL
phase instead of the APPLICATION phase.
This is necessary in order to ensure that the application
initialisation functions (i.e. the functions called during the
APPLICATIION phase) can make use of the libc heap.
Signed-off-by: Stephanos Ioannidis <root@stephanos.io>
This commit changes the invocation of the newlib malloc heap
initialisation function such that it is executed during the POST_KERNEL
phase instead of the APPLICATION phase.
This is necessary in order to ensure that the application
initialisation functions (i.e. the functions called during the
APPLICATIION phase) can make use of the libc heap.
Signed-off-by: Stephanos Ioannidis <root@stephanos.io>
This commit changes the invocation of the minimal libc malloc
initialisation function such that it is executed during the POST_KERNEL
phase instead of the APPLICATION phase.
This is necessary in order to ensure that the application
initialisation functions (i.e. the functions called during the
APPLICATIION phase) can make use of the libc heap.
Signed-off-by: Stephanos Ioannidis <root@stephanos.io>
The function used an assert if n was 0. Instead
of using an assert, the function will now just
not do anything. The documentation has also
been updated to reflect this.
The reasoning for this is that the strlcpy function
this (sort of) implements for utf8 works the same way.
Signed-off-by: Emil Gydesen <emil.gydesen@nordicsemi.no>
MISRA C:2012 Rule 21.13 (Any value passed to a function in <ctype.h>
shall be representable as an unsigned char or be the value EOF).
Functions in <ctype.h> have undefined behavior if they are called with
any other value. Callers affected by this change are not prepared to
handle EOF anyway. The addition of these casts avoids the issue
and does not result in any performance penalty.
Signed-off-by: Abramo Bagnara <abramo.bagnara@bugseng.com>
Signed-off-by: Simon Hein <SHein@baumer.com>
MISRA C:2012 Rule 9.3 (Arrays shall not be partially initialized.)
Systematically use `{0}' to specify full 0 initialization
(not `{}', not `{0U}').
Signed-off-by: Abramo Bagnara <abramo.bagnara@bugseng.com>
Signed-off-by: Simon Hein <SHein@baumer.com>
Picolibc inherited its malloc arena configuration from newlib instead of
from minimal libc. This ended up making it a bit too fragile to run the
full set of zephyr tests. In particular:
* Z_MALLOC_PARTITION_EXISTS would get set when not used
* Setting an arena size depended on a bunch of other values, including
whether the system had an MMU or MPU, and whether the MPU required
power-of-two alignment or not.
This patch cleans things up so that there is a single heap size specifier,
PICOLIBC_HEAP_SIZE.
* If PICOLIBC_HEAP_SIZE is positive, this sets the size of the heap. On
MMU systems, picolibc will only use the remaining memory if that's
smaller.
* If PICOLIBC_HEAP_SIZE is zero, then there is no heap available and
malloc will always fail. This also disables Z_MALLOC_PARTITION_EXISTS.
* If PICOLIBC_HEAP_SIZE is negative, then picolibc uses all remaining
memory for the malloc heap.
The defaults are designed to allow tests to work without requiring
additional settings.
* For MMU enabled systems, the default value is 1048576. It would be nice
to have this use 'all available memory', but that's difficult to manage
as the API which returns free memory (k_mem_free_get) doesn't take into
account the amount of free virtual address space.
* For MPU enabled systems which require power-of-two aligned MPU regions,
the default value is 64kB.
* For other systems, the default value is -1, indicating that all
available memory be used for the malloc arena.
Signed-off-by: Keith Packard <keithp@keithp.com>
Added functions which allow to use zero copy model for handling
data within the packet buffer.
Additionally, added handling of cache by adding option to keep rd_idx
in different cache line than wr_idx and data.
Signed-off-by: Krzysztof Chruscinski <krzysztof.chruscinski@nordicsemi.no>
Picolibc doesn't have the non-standard printf support required for tagged
arguments in cbprintf. Disable this and use the format string parsing code
instead.
Signed-off-by: Keith Packard <keithp@keithp.com>
Picolibc already provides the functionality offered by cbprintf, so
there's no reason to use the larger and less functional version included
in zephyr.
Signed-off-by: Keith Packard <keithp@keithp.com>
When using picolibc, change vprintk to use picolibc's vfprintf instead of
cbvprintf.
Building samples/hello-world for qemu-cortex-m3.
old:
Memory region Used Size Region Size %age Used
FLASH: 9056 B 256 KB 3.45%
SRAM: 3960 B 64 KB 6.04%
IDT_LIST: 0 GB 2 KB 0.00%
new:
Memory region Used Size Region Size %age Used
FLASH: 7900 B 256 KB 3.01%
SRAM: 3960 B 64 KB 6.04%
IDT_LIST: 0 GB 2 KB 0.00%
Signed-off-by: Keith Packard <keithp@keithp.com>
There's no use of the 'count' field of the context, so remove it. Because
that's the only member of struct out_context, remove the whole struct.
Signed-off-by: Keith Packard <keithp@keithp.com>
In the Zephyr implementation, `sem_timedwait()` uses a
potentially wildly different timebase for comparison via
`k_uptime_get()` (uptime in ms).
The standard specifies `CLOCK_REALTIME`. However, the real-time
clock can be modified to an arbitrary value via clock_settime()
and there is no guarantee that it will always reflect uptime.
This change ensures that `sem_timedwait()` uses a more
consistent timebase for comparison.
Fixes#46807
Signed-off-by: Christopher Friedt <chrisfriedt@gmail.com>
For targets without thread local storage, we need to use the builtin
per-thread errno support provided by Zephyr as the multi-thread errno
support provided in picolibc relies on TLS.
Signed-off-by: Keith Packard <keithp@keithp.com>
MISRA C:2012 Rule 8.2 (Function types shall be in prototype form with
named parameters.)
Added missing parameter names.
Signed-off-by: Abramo Bagnara <abramo.bagnara@bugseng.com>
Picolibc is a fork of newlib designed and tested on embedded systems. It
offers a smaller memory footprint (both ROM and RAM), and native TLS
support, which uses the Zephyr TLS support.
By default, the full printf version is included in the executable, which
includes exact floating point and long long input and output. A
configuration option has been added to switch to the integer-only
version (which also omits long long support).
Here are some size comparisons using qemu-cortex-m3 and this application
(parameters passed to printf to avoid GCC optimizing it into puts):
void main(void)
{
printf("Hello World! %s %d\n", CONFIG_BOARD, 12);
}
FLASH SRAM
minimal 8696 3952
picolibc int 7600 3960
picolibc float 12304 3960
newlib-nano int 11696 4128
newlib-nano float 30516 4496
newlib 34800 6112
---
v2:
Include picolibc-tls.ld
v3:
Document usage in guides/c_library.rst and
getting_started/toolchain_other_x_compilers.rst
v4:
Lost the lib/libc/picolibc directory somehow!
v5:
Add PICOLIBC_ALIGNED_HEAP_SIZE configuration option.
Delete PICOLIBC_SEMIHOST option support code
v6:
Don't allocate static RAM for TLS values; TLS
values only need to be allocated for each thread.
v7:
Use arm coprocessor for TLS pointer storage where supported for
compatibility with the -mtp=cp15 compiler option (or when the
target cpu type selects this option)
Add a bunch of tests
Round TLS segment up to stack alignment so that overall stack
remains correctly aligned
Add aarch64 support
Rebase to upstream head
v8:
Share NEWLIB, NEWLIB_NANO and PICOLIBC library configuration
variables in a single LIBC_PARTITIONS variable instead of
having separate PICOLIBC_PART and NEWLIB_PART variables.
v9:
Update docs to reference pending sdk-ng support for picolibc
v10:
Support memory protection by creating a partition for
picolibc shared data and any pre-defined picolibc heap.
v11:
Fix formatting in arch/arm/core/aarch64/switch.S
v12:
Remove TLS support from this patch now that TLS is upstream
Require THREAD_LOCAL_STORAGE when using PICOLIBC for architectures
that support it.
v13:
Merge errno changes as they're only needed for picolibc.
Adapt cmake changes suggested by Torsten Tejlmand Rasmussen
v14:
Update to picolibc 1.7 and newer (new stdin/stdout/stderr ABI)
v15:
Respond to comments from dcpleung:
* switch kernel/errno to use CONFIG_LIBC_ERRNO instead of
CONFIG_PICOLIBC
* Add comment to test/lib/sprintf as to why the %n test
was disabled for picolibc.
v16:
Switch picolibc to a module built with Zephyr. This eliminates
toolchain dependencies and allows compiler settings for Zephyr
to also be applied to picolibc.
v17:
Provide Zephyr-specific 'abort' implementation.
Support systems with MMU
v18:
Allow use of toolchain picolibc version.
v19:
Use zephyr/ for zephyr headers
v20:
Add locking
Use explicit commit for picolibc module
v21:
Create PICOLIBC_SUPPORTED config param. Set on arc, arm, arm64,
mips and riscv architectures.
Signed-off-by: Keith Packard <keithp@keithp.com>
If system memcpy() is used, assert.h must be included. Fixes
a build warning on undeclared use of memcpy.
Signed-off-by: Kai Vehmanen <kai.vehmanen@linux.intel.com>
MISRA C:2012 Rule 7.2 (A `u' or `U' suffix shall be applied to all
integer constants that are represented in an unsigned type)
Added missing `U' suffixes in constants that are involved in the
analyzed build, plus a few more not to introduce inconsistencies
with respect to nearby constants that are either unused in the
build (but implicitly unsigned) or are used and are immediately
converted to unsigned.
Signed-off-by: Abramo Bagnara <abramo.bagnara@bugseng.com>
The cast to narrow for %hhd support must be 'signed char' instead of 'char'
to support targets where 'char' is unsigned, as on riscv.
Signed-off-by: Keith Packard <keithp@keithp.com>
Add flags option to init call and a flag to use cache.
Add Kconfig choice to pick how to approach cache. Cache can be
enforced in all spsc_pbuf instances, disable in all, or runtime selected
based on configuration flag. Option is added to allow memory footprint
savings.
Signed-off-by: Krzysztof Chruscinski <krzysztof.chruscinski@nordicsemi.no>
Move icmsg_buf to lib/os and rename to spsc_pbuf (Single Producer
Single Consumer Packet Buffer). It is a generic module and initially
was created as internal module for ipc service.
Signed-off-by: Krzysztof Chruscinski <krzysztof.chruscinski@nordicsemi.no>
This adds some bits to support tagged arguments to be used for
packaging. If enabled, the packaging function no longer looks at
the format strings to determine the types of arguments, but
instead, each argument is tagged with a type by preceding it
with another argument as type (integer). This allows the format
strings to be removed from the final binary to conserve space.
Signed-off-by: Daniel Leung <daniel.leung@intel.com>
For the error codes used only in __ASSERT() statements fix compilation
warnings like:
...
warning: variable 'err' set but not used [-Wunused-but-set-variable]
int err;
^
...
Signed-off-by: Andrei Emeltchenko <andrei.emeltchenko@intel.com>
New Types:
* Added support for Generic Numeric type (float, 64-bit)
* Added support for Opaque string type.
* Added support parse Array data in object for seprate array parsing
New API for Json Array parsing Object 1 by 1:
* json_arr_separate_object_parse_init() init array parse
* json_arr_separate_parse_object() Parsing 1 Json Object
Rename token and lexer structures and publish those.
Signed-off-by: Juha Heiskanen <juha.heiskanen@nordicsemi.no>
Fixes following warning during compilation with llvm:
...
lib/os/mpsc_pbuf.c:428:8: warning: variable 'wrap' set but not used
[-Wunused-but-set-variable]
bool wrap;
^
1 warning generated.
...
Signed-off-by: Andrei Emeltchenko <andrei.emeltchenko@intel.com>
The gmtime() function returns a global result variable, and this
variable must be placed in the `z_libc_partition` when userspace is
enabled.
Since gmtime() makes use of a global variable and this results in a
footprint increase, this commit makes the time functions optional by
introducing `CONFIG_MINIMAL_LIBC_TIME` Kconfig and making them only
available when this option is enabled.
Signed-off-by: Stephanos Ioannidis <root@stephanos.io>
This commit globally defines the `Z_LIBC_DATA` macro, which is used to
place variables into the libc memory partition, so that it can be
re-used.
Signed-off-by: Stephanos Ioannidis <root@stephanos.io>
This commit introduces a new configuration called
`CONFIG_MINIMAL_LIBC_NON_REENTRANT_FUNCTIONS`, which enables the
traditional non-reentrant (i.e. not thread-safe) version of the C
standard library functions such as rand() and gmtime() when the
respective configs are enabled.
The non-reentrant functions make use of the globals and require an
additional memory partition (MPU region), which is scarce on low-end
devices, when CONFIG_USERSPACE=y.
The purpose of this option is to classify the MPU resource intensive
functions as a separate category and only enable them when there is a
demand for such.
Signed-off-by: Stephanos Ioannidis <root@stephanos.io>
This commit adds the `rand_r` function, which is a reentrant (i.e.
thread-safe) version of the `rand` function, such that a thread-safe
variant is always available.
Signed-off-by: Stephanos Ioannidis <root@stephanos.io>
This commit adds the missing `PRIxMAX` macros for the C99 `intmax_t`
and `uintmax_t` types:
PRIdMAX, PRIiMAX, PRIoMAX, PRIuMAX, PRIxMAX, PRIXMAX
Note that the `PRIxMAX` macros specify the `ll` size modifier because
the type of the `intmax_t` for the minimal libc is defined as that of
the `int64_t`, which is always overridden to `long long int` by
`zephyr_stdint.h`; for more details, refer to the GitHub PR #29876,
which deliberately introduced this scheme.
In the future, this scheme will need to be reworked such that the
minimal libc `stdint.h` defines `intmax_t` as `__INTMAX_TYPE__`, and
the `inttypes.h` resolves the corresponding format specifier.
Signed-off-by: Stephanos Ioannidis <root@stephanos.io>
This commit adds the missing `PRIx{FAST,LEAST}N` C99 integer type
format macros that correspond to the C99 integer types overridden in
the `zephyr_stdint.h` header:
PRIdFAST8, PRIdFAST16, PRIdFAST32, PRIdFAST64
PRIdLEAST8, PRIdLEAST16, PRIdLEAST32, PRIdLEAST64
PRIiFAST8, PRIiFAST16, PRIiFAST32, PRIiFAST64
PRIiLEAST8, PRIiLEAST16, PRIiLEAST32, PRIiLEAST64
PRIoFAST8, PRIoFAST16, PRIoFAST32, PRIoFAST64
PRIoLEAST8, PRIoLEAST16, PRIoLEAST32, PRIoLEAST64
PRIuFAST8, PRIuFAST16, PRIuFAST32, PRIuFAST64
PRIuLEAST8, PRIuLEAST16, PRIuLEAST32, PRIuLEAST64
PRIxFAST8, PRIxFAST16, PRIxFAST32, PRIxFAST64
PRIxLEAST8, PRIxLEAST16, PRIxLEAST32, PRIxLEAST64
PRIXFAST8, PRIXFAST16, PRIXFAST32, PRIXFAST64
PRIXLEAST8, PRIXLEAST16, PRIXLEAST32, PRIXLEAST64
Note that these macros will eventually need to be defined according to
the toolchain-specified types when the `zephyr_stdint.h` hack is
removed in the future; refer to the the GitHub issue #46032 for more
details.
Signed-off-by: Stephanos Ioannidis <root@stephanos.io>
This commit adds the strstr function implementation that is licensed
BSD-3-Clause, which is an OSI-approved license, with the modifications
necessary for adoption into the Zephyr minimal C library.
Note that this implementation is based on the size optimised version of
the newlib strcasestr function.
Origin: Newlib
License: BSD 3-Clause
URL: git://sourceware.org/git/newlib-cygwin.git
Commit: 9087163804df8af6dc2ec1f675a2341c25f7795f
Purpose: strstr function support in the minimal C library
Signed-off-by: Stephanos Ioannidis <root@stephanos.io>
This commit removes the strstr function implementation that is
licensed BSD-4-Clause-UC, which is not an OSI-approved license.
Signed-off-by: Stephanos Ioannidis <root@stephanos.io>
This commit adds the strtoull function implementation that is licensed
BSD-3-Clause, which is an OSI-approved license, with the modifications
necessary for adoption into the Zephyr minimal C library.
Origin: Newlib
License: BSD 3-Clause
URL: git://sourceware.org/git/newlib-cygwin.git
Commit: 9042d0ce65533a26fc3264206db5828d5692332c
Purpose: strtoull function support in the minimal C library
Signed-off-by: Stephanos Ioannidis <root@stephanos.io>
This commit removes the strtoull function implementation that is
licensed BSD-4-Clause-UC, which is not an OSI-approved license.
Signed-off-by: Stephanos Ioannidis <root@stephanos.io>
This commit adds the strtoll function implementation that is licensed
BSD-3-Clause, which is an OSI-approved license, with the modifications
necessary for adoption into the Zephyr minimal C library.
Origin: Newlib
License: BSD 3-Clause
URL: git://sourceware.org/git/newlib-cygwin.git
Commit: 9042d0ce65533a26fc3264206db5828d5692332c
Purpose: strtoll function support in the minimal C library
Signed-off-by: Stephanos Ioannidis <root@stephanos.io>
This commit removes the strtoll function implementation that is
licensed BSD-4-Clause-UC, which is not an OSI-approved license.
Signed-off-by: Stephanos Ioannidis <root@stephanos.io>
This commit adds the strtoul function implementation that is licensed
BSD-3-Clause, which is an OSI-approved license, with the modifications
necessary for adoption into the Zephyr minimal C library.
Origin: Newlib
License: BSD 3-Clause
URL: git://sourceware.org/git/newlib-cygwin.git
Commit: 9042d0ce65533a26fc3264206db5828d5692332c
Purpose: strtoul function support in the minimal C library
Signed-off-by: Stephanos Ioannidis <root@stephanos.io>
This commit removes the strtoul function implementation that is
licensed BSD-4-Clause-UC, which is not an OSI-approved license.
Signed-off-by: Stephanos Ioannidis <root@stephanos.io>
This commit adds the strtol function implementation that is licensed
BSD-3-Clause, which is an OSI-approved license, with the modifications
necessary for adoption into the Zephyr minimal C library.
Origin: Newlib
License: BSD 3-Clause
URL: git://sourceware.org/git/newlib-cygwin.git
Commit: 9042d0ce65533a26fc3264206db5828d5692332c
Purpose: strtol function support in the minimal C library
Signed-off-by: Stephanos Ioannidis <root@stephanos.io>
This commit removes the strtol function implementation that is
licensed BSD-4-Clause-UC, which is not an OSI-approved license.
Signed-off-by: Stephanos Ioannidis <root@stephanos.io>
The lmp90100_evb sample included an implementation of double sqrt, and the
on_off_level_lighting_vnd_app sample included an implementation of float
sqrtf. Move that code into minimal libc instead of requiring applications
to hand-roll their own version.
Signed-off-by: Keith Packard <keithp@keithp.com>
In order to bring consistency in-tree, migrate all lib code to the new
prefix <zephyr/...>. Note that the conversion has been scripted, refer
to zephyrproject-rtos#45388 for more details.
Signed-off-by: Gerard Marull-Paretas <gerard.marull@nordicsemi.no>
When in_len is 0 then length is calculated from the package and
assignment was missing.
Signed-off-by: Krzysztof Chruscinski <krzysztof.chruscinski@nordicsemi.no>
Extend package copying functionality by adding function for converting
a package. Function gets callback+context pair and converted package
is part by part passed to that callback. Contrary to typical sprintf
callback which works on chars, callback works with buffers.
Existing cbprintf_package_copy function is implemented as static
inline and uses new cbprintf_package_convert API.
Signed-off-by: Krzysztof Chruscinski <krzysztof.chruscinski@nordicsemi.no>
sparse complains about cbprintf incompatible callback type and
incorrect size of struct __va_list. Add exceptions to silence those
errors.
Signed-off-by: Guennadi Liakhovetski <guennadi.liakhovetski@linux.intel.com>
Fix a variable declaration type conflict:
libc-hooks.c:92:16: error: conflicting types for '_heap_sentry'
92 | extern void *_heap_sentry;
soc.h:78:13: note: previous declaration of '_heap_sentry' was here
Fixes#44926
Signed-off-by: Flavio Ceolin <flavio.ceolin@intel.com>
Destination buffer size could be too small by one,
but null termination is still written. This could cause an
overwrite in contiguous memory without notice.
Signed-off-by: Rico Ganahl <rico.ganahl@bytesatwork.ch>
Besides the current allocated/free bytes, keep track of
the maximum allocated bytes to help determine the heap
size requirements. Also, provide a function to reset
the statistic.
Signed-off-by: Damian Krolik <damian.krolik@nordicsemi.no>
Move include paths and add new target_include_directories to support
backwards compatibility:
* /include -> /include/zephyr
example: <irq.h> -> <zephyr/irq.h>
Issue #41543
Signed-off-by: Yuval Peress <peress@google.com>
Some problems, as passing NULL when a context in expected,
always reflect to bugs. Such problems cannot be handled
in runtime. So the desired action is system panic.
Signed-off-by: Marcin Szkudlinski <marcin.szkudlinski@intel.com>
Some problems, as passing NULL when a context in expected,
always reflect to bugs. Such problems cannot be handled
in runtime. So the desired action is system panic.
Signed-off-by: Marcin Szkudlinski <marcin.szkudlinski@intel.com>
memory block should allow not only allocate memory but also
getting an arbitrary chosen part of memory.
Mixing of allocate and get, however possible, may be dangerous
because alloc may get any of memory. So be careful.
Signed-off-by: Marcin Szkudlinski <marcin.szkudlinski@intel.com>
As preparation for memory blocks to support continuous memory blocks
modify bitmap operation wrappers to support multiple bits alloc/free
Signed-off-by: Marcin Szkudlinski <marcin.szkudlinski@intel.com>
a method to check and set/clear a chosen region in a bitmap
if not previously set/cleared in a single atomic operation.
Useful for keeping track of resources usage, like memory banks
Signed-off-by: Marcin Szkudlinski <marcin.szkudlinski@intel.com>
As described in
https://pubs.opengroup.org/onlinepubs/7908799/xsh/pthread_once.html.
The behavior of pthread_once() is undefined if once_control has
automatic storage duration or is not initialized by PTHREAD_ONCE_INIT
However, in Zephyr, the implementation is incorrect. If the init value
is PTHREAD_ONCE_INIT, the program will never run the init_func.
Signed-off-by: Jaxson Han <jaxson.han@arm.com>
Algorithm was converting uptime to nanoseconds which can easily
lead to overflows. Changed algorithm to use milliseconds and
nanoseconds for remainder only.
Signed-off-by: Krzysztof Chruscinski <krzysztof.chruscinski@nordicsemi.no>
Add flag to copy function which indicates that read-only
string locations shall be kept in the output package.
Updated cbprintf_package test to pass.
Signed-off-by: Krzysztof Chruscinski <krzysztof.chruscinski@nordicsemi.no>
f4df23c9 added dependency on ASSERT to some options prefixed
with ASSERT_ assuming that they are no used elsewhere. Turned
out that there are subsystem specific assert macros (e.g. BT_ASSERT)
which relies on those options. Removing the dependency.
Signed-off-by: Krzysztof Chruscinski <krzysztof.chruscinski@nordicsemi.no>
- strtoll() and strtoull() are copies of strtol() and strtoul() with
types changed to long long instead of long.
- added tests
- added documentation
- removed stubs from civetweb sample
Signed-off-by: Gerhard Jörges <joerges@metratec.com>
This allows a resource table to be included even if neither virtIO nor the
RAM console are used.
Signed-off-by: Matthias Fend <matthias.fend@emfend.at>
Create wrapper for printk to avoid including printk.h in __assert.h.
__assert.h is used everywhere thus should not have dependency to
printk.h.
Cleanup assert Kconfig options.
Signed-off-by: Krzysztof Chruscinski <krzysztof.chruscinski@nordicsemi.no>
Added new flags to packaging API:
- CBPRINTF_PACKAGE_ADD_RO_STR_IDXS - when set, read-only string
locations are appended to the package
- CBPRINTF_PACKAGE_ADD_RW_STR_IDXS - when set, read-write string
locations are appended to the package (instead of appending actual
strings)
- CBPRINTF_PACKAGE_FIRST_RO_STR_CNT(n) - indicate that n first strings
are known to be read only. Ignored in runtime packaging.
Add function for copying packages with optional appending strings.
Changed CBPRINTF_MUST_RUNTIME_PACKAGE to use same flags as packaging.
Aligned logging and test to those changes.
Signed-off-by: Krzysztof Chruscinski <krzysztof.chruscinski@nordicsemi.no>
Sometimes there's a need to perform special operations on a heap
for a specified block. I.e. release virtual memory mapping,
power off memory bank etc.
The added procedure gets a pointer to a proper heap with metadata
for a given address.
Signed-off-by: Marcin Szkudlinski <marcin.szkudlinski@intel.com>
When operating on different kinds of heaps sometimes there's a need to
perform special operations on heap, poweroff memory bank when releasing
memory etc. Therefore some additional data may be required.
Metadata is a point to keep such data.
Signed-off-by: Marcin Szkudlinski <marcin.szkudlinski@intel.com>
According to Kconfig guidelines, boolean prompts must not start with
"Enable...". The following command has been used to automate the changes
in this patch:
sed -i "s/bool \"[Ee]nables\? \(\w\)/bool \"\U\1/g" **/Kconfig*
Signed-off-by: Gerard Marull-Paretas <gerard.marull@nordicsemi.no>
The minimal C library already supports the fast and least types via
typedefs, but the corresponding min and max macros were missing. Add
those so that we are compatible with software using them.
Signed-off-by: Carles Cufi <carles.cufi@nordicsemi.no>
Remove the cast of the two parameter compare function used by qsort, to
the three parameter callback function used by qsort_r, in order to
ensure compatibility with other toolchains, even those off-tree.
Fixes#42870
Signed-off-by: Danny Oerndrup <daor@demant.com>
This adds a utility function to check if an address is within
read only section. This is extracted from logging subsys so
use the new func in logging. The one is cbprintf_packaged is
also replaced.
Signed-off-by: Daniel Leung <daniel.leung@intel.com>
Make it possible to "finish" with fewer bytes than what was "claimed".
This was possible before on the get side, but the put side was
cummulative wrt finish. The revamp made it cummulative on both sides.
Turns out that existing users rely on the opposite behavior which is
more logical and useful. So make both sides that way.
Adjust documentation, test case and users accordingly.
Signed-off-by: Nicolas Pitre <npitre@baylibre.com>
The item mode is really a specialization of the byte mode. And in-tree
usage shows the byte mode is prominent. It feels more natural if the
byte mode is presented first with the item mode second. Swap the code
and documentation order accordingly. No code change.
Signed-off-by: Nicolas Pitre <npitre@baylibre.com>
This code is rather hairy. When I look at it I don't like the way it
stares back at me.
First, the rewind business looks fishy. It has to die.
And we don't have to rely on modulus either. Not even for non-power-of-2
buffers. Let's kill that distinction too and make all sizes always
"high performance".
The code is now entirely relying only on simple ALU operations (add,
sub and compare).
The key assumption: 32-bit values do wrap around after max range has
been reached. No saturation. All architectures supported by Zephyr
do that.
Some stats:
lib/os/ring_buffer.c: 62 insertions(+), 124 deletions(-)
ring_buffer.c.obj before after diff
----------------------------------------------
frdm_k64f 1224 1136 -88
m2gl025_miv 2485 2079 -406
mps2_an385 1228 1132 -96
mps2_an521 1228 1132 -96
native_posix 1546 1496 -50
native_posix_64 1598 1595 -3
nsim_hs_mpuv6 1252 1192 -60
nsim_hs_smp 1252 1192 -60
nsim_sem 1252 1192 -60
qemu_arc_em 1324 1192 -132
qemu_arc_hs6x 1824 1620 -204
qemu_arc_hs 1252 1192 -60
qemu_cortex_a53_smp 2154 1888 -266
qemu_cortex_a53 2154 1888 -266
qemu_cortex_a9 1938 1792 -146
Before (qemu_cortex_a53):
START - test_ringbuffer_performance
1 byte put-get, avg cycles: 52
4 byte put-get, avg cycles: 47
1 byte put claim-finish, avg cycles: 39
5 byte put claim-finish, avg cycles: 41
5 byte get claim-finish, avg cycles: 52
PASS - test_ringbuffer_performance in 0.8 seconds
After (qemu_cortex_a53):
START - test_ringbuffer_performance
1 byte put-get, avg cycles: 34
4 byte put-get, avg cycles: 41
1 byte put claim-finish, avg cycles: 27
5 byte put claim-finish, avg cycles: 29
5 byte get claim-finish, avg cycles: 29
PASS - test_ringbuffer_performance in 0.4 seconds
Signed-off-by: Nicolas Pitre <npitre@baylibre.com>
Conceptually, ring_buf_item_put() and ring_buf_item_get() are specialized
versions of ring_buf_put() and ring_buf_get(). Make it so to rationalize
the code to open the way for more optimizations.
This means we need specialized wrappers on top of ring_buf_init()
accordingly, given that the core machinery is now common and byte based.
Signed-off-by: Nicolas Pitre <npitre@baylibre.com>
The mismatch_mask in match_region() is set but never actually
being used. So remove it as Clang complains.
Signed-off-by: Daniel Leung <daniel.leung@intel.com>
Start using the upstream Kconfig from LVGL and move the glue code out
of the zephyr tree and put it under lvgl/zephyr/ in modules.
Signed-off-by: Bartosz Golaszewski <bartosz.golaszewski@huawei.com>
This updates the lvgl in-tree glue code to work with version v8.1.0 and
bumps the west manifest accordingly.
The following are the most significant changes:
- The logging callback has changes in lvgl and no longer provides the
caller with an integer log level code. We now need to parse the log
string's prefix to determine the level.
- Several Kconfig options (mostly for default values of various settings)
have been removed because these values are no longer configurable in
lvgl.
- The library no longer performs a deep copy of the display and input
device driver structs, so these must no longer be allocated on the
stack in the init func.
Other than that it's mostly about renaming of various structures and
functions and adjusting the calls if function's signatures have changed.
This patch allows all in-tree users to work correctly but it's likely
it doesn't support all new widgets and layouts added in lvgl v8. These
however can be added gradually once this is upstream.
Signed-off-by: Bartosz Golaszewski <bartosz.golaszewski@huawei.com>
In order to support lvgl v8, we need to provide a realloc() implementation
in our custom sys_heap allocator. This uses sys_heap_realloc() internally
and exposes traditional realloc() semantics.
Signed-off-by: Bartosz Golaszewski <bartosz.golaszewski@huawei.com>
The sys_heap layer doesn't provide any locking mechanism. Add a spin_lock
around the calls to sys_heap functions.
Suggested-by: Nicolas Pitre <npitre@baylibre.com>
Signed-off-by: Bartosz Golaszewski <bartosz.golaszewski@huawei.com>
Improve efficiency by introducing the 8-byte alignment of the private
heap.
Suggested-by: Nicolas Pitre <npitre@baylibre.com>
Signed-off-by: Bartosz Golaszewski <bartosz.golaszewski@huawei.com>
Current lvgl code allows to use the kernel heap for dynamic memory
allocation. The k_heap API doesn't however provide k_realloc() which
will be needed in order to update lvgl to v8. Nico suggested there's
no good reason for lvgl to use k_heap and it should stick to either
the libc's allocator or depend on its own private sys_heap.
The alternative would be to extend the k_heap API to provide k_realloc()
but this may be tricky for several reasons and for now there would
be a single user anyway.
This removes the choice of using k_heap for lvgl and renames the user
pool to SYS_HEAP in Kconfig and makes it the default option.
The prj.conf for the lvgl sample is modifed to specify the number of
memory pool blocks instead of the total size as the default block
size is 2048 and it results in the same size of memory.
Suggested-by: Nicolas Pitre <npitre@baylibre.com>
Signed-off-by: Bartosz Golaszewski <bartosz.golaszewski@huawei.com>
The callback used for the 32-bit color depth has a slight problem, it
doesn't take opacity into account. Correctly mix the colors by using
lv_color_mix().
Suggested-by: Gabor Kiss-Vamosi <kisvegabor@gmail.com>
Signed-off-by: Bartosz Golaszewski <bartosz.golaszewski@huawei.com>
Add API to fetch current buffer usage. Add option to track
maximum buffer usage and API to fetch that value.
Signed-off-by: Krzysztof Chruscinski <krzysztof.chruscinski@nordicsemi.no>
Added locking to posix read(), write(), close()
for additional protection.
In read() missing lock would create uneven calls to locking
mechanism in sockets.c after k_condvar_wait().
That results in socket lock not ever being unlocked
Signed-off-by: Daniel Nejezchleb <dnejezchleb@hwg.cz>
It was noted that `pthread_cond_wait()` would always return
ETIMEDOUT, even when successful (and no timeout should ever
occur with `K_FOREVER`).
The z_sched_wake() / z_sched_wake_all() / z_sched_wait() API
are used here with a swap return value of 0 to indicate
success.
Fixes#41284
Signed-off-by: Christopher Friedt <chrisfriedt@gmail.com>
Use rodata region markers to detect if string is read only on
sparc. It was previously disabled but now can be used.
Signed-off-by: Krzysztof Chruscinski <krzysztof.chruscinski@nordicsemi.no>
As described in #42403, there was an issue with the existing crc16_ansi()
implementation, since it was not calculating the CRC-16-ANSI (aka
CRC-16-MODBUS). This is because the existing crc16() function only
supported non-reflected input and output (and the CRC-16-ANSI requires
reflection on both) and also it did not seem to support correctly inial
seeds different from 0x0000 (and, again, the CRC-16-ANSI requires 0xffff
as an initial seed).
This commit replaces the existing crc16() with a functional pair,
crc16() and crc16_reflect(), that also work with any poly, any initial seed
and allow to select whether reflection is performed.
It also adapts crc16_ansi() so that it actually returns the correct CRC.
Fixes#42403.
Signed-off-by: Carles Cufi <carles.cufi@nordicsemi.no>
This adds to the cbprintf_packaged library to allow external
formatters to be used by the way of callback. This will allow
logging backends to use their own formatter for output if
needed.
Signed-off-by: Daniel Leung <daniel.leung@intel.com>
Fixed a dependency from printk.h to logging headers which in
certain configurations could lead to circular dependencies.
Cleaned up printk.c to call z_log_vprintk from vprintk.
Signed-off-by: Krzysztof Chruscinski <krzysztof.chruscinski@nordicsemi.no>
Refactoring to remove code redundancy caused by splitted
handling based on USERSPACE enabled.
Signed-off-by: Krzysztof Chruscinski <krzysztof.chruscinski@nordicsemi.no>
Calling gettimeofday() from _gettimeofday() in a non-Posix build
environment can result in a recursive call loop, causing a stack
overflow. Modify _gettimeofday() to return -1 for non-posix systems
(the previous behaviour that was added in #22508).
Fixes#41095
Signed-off-by: Binu Jacob <bjj@planetinnovation.com.au>
- Abstract buffer offset computation for better code clarity.
- Rework the logic around rw/ro strings to simplify the logic and
to guard against overflows even when only computing the needed buffer
size.
- Use modulus to simplify alignment tests (generated assembly is
the same).
- Avoid CBPRINTF_ prefixes for local macro names
- Better pointer types to reduce cast usage.
- Add more comments.
Signed-off-by: Nicolas Pitre <npitre@baylibre.com>
MIPS (Microprocessor without Interlocked Pipelined Stages) is a
instruction set architecture (ISA) developed by MIPS Computer
Systems, now MIPS Technologies.
This commit provides MIPS architecture support to Zephyr. It is
compatible with the MIPS32 Release 1 specification.
Signed-off-by: Antony Pavlov <antonynpavlov@gmail.com>
It's not uncommon to have Zephyr running in environments where it
shares a memory bus with a foreign/non-Zephyr system (both the older
Intel Quark and cAVS audio DSP systems share this property). In those
circumstances, it would be nice to have a utility that allows an
arbitrary-sized chunk of that memory to be used as a unidirectional
buffered byte stream without requiring complicated driver support.
sys_winstream is one such abstraction.
This code is lockless, it makes no synchronization demands of the OS
or hardware beyond memory ordering[1]. It implements a simple
file/socket-style read/write API. It produces small code and is high
performance (e.g. a read or write on Xtensa is about 60 cycles plus
one per byte copied). It's bidirectional, with no internal Zephyr
dependencies (allowing it to be easily ported to the foreign system).
And it's quite a bit simpler (especially for the reader) than the
older cAVS trace protocol it's designed to replace.
[1] Which means that right now it won't work reliably on arm64 until
we add a memory barrier framework to Zephyr! See notes in the code;
the locations for the barriers are present, but there's no utility to
call.
Signed-off-by: Andy Ross <andrew.j.ross@intel.com>
For functions returning nothing, there is no need to document
with @return, as Doxgen complains about "documented empty
return type of ...".
Signed-off-by: Daniel Leung <daniel.leung@intel.com>
Two issues were found:
- subtracting rewinding value from head could result in negative value
- calling ring_buf_put_claim after tail got rewinded but before head
got rewinded resulted in error.
Signed-off-by: Krzysztof Chruscinski <krzysztof.chruscinski@nordicsemi.no>
This adds similar ability of sys_multi_heap to the memory blocks
allocator, where a choice function can be used to select
which allocator (of a group) is used for memory block allocation.
Signed-off-by: Daniel Leung <daniel.leung@intel.com>
This introduces yet another memory blocks allocator where:
() All memory blocks have a single fixed size.
() Multiple blocks can be allocated or freed at the same time.
() A group of blocks allocated together may not be contiguous.
This is useful for operations such as scatter-gather DMA
transfers.
() Bookkeeping of allocated blocks is done outside of
the associated buffer (unlike memory slab). This allows
the buffer to reside in memory regions where these can be
powered down to conserve energy.
Signed-off-by: Daniel Leung <daniel.leung@intel.com>
Add the kconfig option so that the utf8.c file can be
conditionally compile, and only for the applications
that need it.
Signed-off-by: Emil Gydesen <emil.gydesen@nordicsemi.no>
Add a function to copy a UTF-8 encoded string that
ensure correct truncation of the string if the source
is larger than the destination, as well as ensuring that
the resulting destination string is NULL-terminated.
Signed-off-by: Emil Gydesen <emil.gydesen@nordicsemi.no>
Add a function that can properly truncate UTF-8 strings
without leaving unterminated started characters,
as UTF-8 characters can be 1-4 bytes long.
Signed-off-by: Emil Gydesen <emil.gydesen@nordicsemi.no>
This changes CONFIG_HEAP_LISTENER to be a hidden kconfig so that
the actual heap implementation can select it to enable
notifications. Each heap implementations will have their own
kconfigs to enable heap listener functionality so that app
can be built to only listen to certain heap implementations.
Signed-off-by: Daniel Leung <daniel.leung@intel.com>
This extends the heap_listener to cover more events,
specifically, allocation, free and realloc.
Note that typedef are used so the callback can be
documented.
Signed-off-by: Daniel Leung <daniel.leung@intel.com>
Add a parameter to the resize callback to also take the heap ID.
This allows a single callback to be used for multiple heaps if
so desired.
Signed-off-by: Daniel Leung <daniel.leung@intel.com>
Getopt has been rework in this way that calling it does not require
extra state parameter and its execution is thread safe.
Global parameters describing the state of the getopt function have been
made available to ensure full API compatibility in using this library.
However, referencing these global variables directly is not thread
safe. In order to get the state of the getopt function for the thread
that is currently using it, call: getopt_state_get();
Extended the library with getopt_long and getopt_long_only functions.
Moved getopt libary from utils to posix.
Signed-off-by: Jakub Rzeszutko <jakub.rzeszutko@nordicsemi.no>
* add generic heap event listener module that can be used
for notifying an application of heap-related events
* use the listener module in newlib libc hooks
* add a unit test
Signed-off-by: Damian Krolik <damian.krolik@nordicsemi.no>
Removed unused functions, or moved inside #ifdefs.
This allows using -Werror=unused-function on the clang compiler. Tested
by building the ChromeOS EC on all supported platforms with
-Werror=unused-functions.
Signed-off-by: Jeremy Bettis <jbettis@google.com>
It is not possible completely remove options like
LVGL_DISPLAY_DEV_NAME without heavy reworking of LVGL support
because lvgl_init needs the name of the device, and
LVGL_*_RES_MAX options to define internal buffers.
Signed-off-by: Johann Fischer <johann.fischer@nordicsemi.no>
- Remove the weak symbol definition
- Notify about the capability of disabling via a selected Kconfig option
(CONFIG_SYSTEM_TIMER_HAS_DISABLE_SUPPORT)
- Provide a dummy inline function when the functionality is not
available
Signed-off-by: Gerard Marull-Paretas <gerard.marull@nordicsemi.no>
The library supports encoding JSON objects and arrays as well as
parsing JSON objects. Introduce a new function json_arr_parse() adding
support for parsing top-level JSON arrays.
Signed-off-by: Markus Fuchs <markus.fuchs@ch.sauter-bc.com>
add functions to get the sys_heap runtime statistics,
include total free bytes, total allocated bytes.
Signed-off-by: Chen Peng1 <peng1.chen@intel.com>
This change implements qsort() for the minimal libc via Heapsort.
Heapsort time complexity is O(n log(n)) in the best, average,
and worst cases. It is O(1) in space complexity (i.e. sorts
in-place) and is iterative rather than recursive. Heapsort is
not stable (i.e. does not preserve order of identical elements).
On cortex-m0, this implementation occupies ~240 bytes.
Fixes#28896
Signed-off-by: Christopher Friedt <chrisfriedt@gmail.com>
This lets the toolchain header files determine how to use "restrict"
instead of having that decision down in the minimal libc library.
Signed-off-by: Bradley Bolen <bbolen@lexmark.com>
In function smf_execute_ancestor_exit_actions, variables
"tmp_state" and "target_parent" are set but not used.
Twister passed:
twister -T tests/lib/smf/
Signed-off-by: Sam Hurst <sbh1187@gmail.com>
The "small" heap is is way sufficient for most 32-bit systems.
Let's provide the option to have only one type of heap allowing for
smaller and faster heap code due to not having a bunch of runtime
conditionals based on the heap size.
Signed-off-by: Nicolas Pitre <npitre@baylibre.com>
The shared multi-heap memory pool manager uses the multi-heap allocator
to manage a set of reserved memory regions with different capabilities /
attributes (cacheable, non-cacheable, etc...) defined in the DT.
The user can request allocation from the shared pool specifying the
capability / attribute of interest for the memory (cacheable /
non-cacheable memory, etc...)
Signed-off-by: Carlo Caione <ccaione@baylibre.com>
Add a simple internal block size predicate to expose the internal
memory region reserved for an allocation. The immediate use case is
cache-incoherent systems wanting to do an invalidate of freed memory,
but it might be useful for apps doing e.g. string processing to better
optimize size changes, etc...
Signed-off-by: Andy Ross <andrew.j.ross@intel.com>
Add an application agnostic State Machine Framework library to
Zephyr that provides an easy way for developers to integrate
state machines into their application.
Twister passed:
twister -T tests/lib/smf/
Signed-off-by: Sam Hurst <sbh1187@gmail.com>
This is a simple wrapper allowing multiple sys_heap regions to be
unified under a single allocation API. Sometimes apps need the
ability to share multiple discontiguous regions in a single "heap", or
to have memory of different "types" be allocated heuristically based
on usage (e.g. cacheability, latency, power...). This allows a
user-specified function to select the underlying memory to use for
each application.
Signed-off-by: Andy Ross <andrew.j.ross@intel.com>
Implement the iscntrl() function, which returns whether a character is a
control one or not.
Ref: https://en.cppreference.com/w/c/string/byte/iscntrl
Signed-off-by: Carles Cufi <carles.cufi@nordicsemi.no>
The commit 9bd1483afeb18f4225ec7b0340b0d4e20efb7d01 was added as a
workaround for the Xtensa initial malloc failure bug.
This bug has been fixed in the Zephyr SDK 0.13.1 release and therefore
this workaround is no longer needed.
Signed-off-by: Stephanos Ioannidis <root@stephanos.io>
When the sof module code was build, it was found that
PI was not defined in the minimal library.
Here are some mathematical constant definitions to avoid build errors.
Signed-off-by: Yang XiaoHua <yangxiaohuamail@gmail.com>
C implicit promotion rules will want to make floats into doubles very
easily. Zephyr build will generate warnings when this flag,
`-Wdouble-promotion`, is enabled with GCC
Signed-off-by: Ryan McClelland <ryanmcclelland@fb.com>
This commit removes the `z_` prefix from the stdio syscall functions
(`z_zephyr_write_stdout` and `z_zephyr_read_stdin`) since it is
redundant and does not align with the convention used by the equivalent
minimal libc syscall functions (e.g. `zephyr_fputc` and
`zephyr_fwrite`).
Signed-off-by: Stephanos Ioannidis <root@stephanos.io>
The newlib `write()` and `read()` functions must call the
`z_zephyr_write_stdout()` and `z_zephyr_read_stdin()` syscall functions
in order to function properly in a user mode context.
The existing incorrect implementation was copied off the newlib hooks
implementation, which was corrected in the previous commit.
Signed-off-by: Stephanos Ioannidis <root@stephanos.io>
The commit 4344e27c26 changed the syscall
function invocation in the `write()` and `read()` functions to the
direct syscall implementation function invocation by mistake.
The newlib `write()` and `read()` functions must call the
`z_zephyr_write_stdout()` and `z_zephyr_read_stdin()` syscall functions
in order to function properly in a user mode context.
Signed-off-by: Stephanos Ioannidis <root@stephanos.io>
When CONFIG_USERSPACE is turned off, the POOL_SECTION will be located in
.data section. This will increase the target binary size. Since the
memory pool is for malloc() use and it doesn't need for initial values,
locate it in the .bss section to reduce binary size.
Signed-off-by: Dylan Hung <dylan_hung@aspeedtech.com>
Change-Id: Iee52ac06a48414c083518c79775fe31334eab674
ARC MWDT libraries require to implement locking interface
otherwise not all of functionality is guarantee to be
thread-safe.
So, let's implement locking interface.
Signed-off-by: Eugeniy Paltsev <Eugeniy.Paltsev@synopsys.com>
Signed-off-by: Evgeniy Paltsev <PaltsevEvgeniy@gmail.com>
We shouldn't use swapping with an interrupt lock held
as it works incorrectly on SMP platforms.
Fix that by replacing irq_lock with spinlock for pthread
subsystem.
NOTE: we fix that in a simple way with single spinlock
for mutex / cond_var / barrier. That could be improved
later (i.e. split it for several spinlocks).
Signed-off-by: Eugeniy Paltsev <Eugeniy.Paltsev@synopsys.com>
Signed-off-by: Evgeniy Paltsev <PaltsevEvgeniy@gmail.com>
There might be a sign extension when a long is promoted to
int_value_type and the former type is smaller than the later.
This produces the wrong output if the specified format is unsigned.
Let's avoid this problem by handling signed and unsigned cases
explicitly. When the type already matches int_value_type then the
compiler is smart enough to recognize the redundancy and removes
unneeded duplications automatically, meaning that the code will stay
small when code size matters.
A similar issue also existed in the restricted %llu case.
The fix is the same as above.
Those fixes exposed wrong results in the printk.c test with %llx
so fix that as well.
Signed-off-by: Nicolas Pitre <npitre@baylibre.com>
For the Xtensa platforms (e.g. qemu_xtensa), the first `malloc` call
may fail if the newlib heap base address is such that the first `sbrk`
call returns a 4096-byte aligned address.
Here we add a workaround for Xtensa that allocates and immediately
frees a 16-byte memory block during initialisation so that all
subsequent `malloc` calls succeed.
This commit needs to be reverted once the issue #38258 is fixed.
Signed-off-by: Stephanos Ioannidis <root@stephanos.io>
Default weak _exit implementation from ARC MWDT libs
calls _exit_halt from startup libs. As we are going to
get rid of startup libs usage let's implement _exit
stub.
Signed-off-by: Eugeniy Paltsev <Eugeniy.Paltsev@synopsys.com>
Signed-off-by: Evgeniy Paltsev <PaltsevEvgeniy@gmail.com>
The stub file threading_weak.c has been added containing weak stub
implementation of threading related kernel functions.
The file is needed for armlink.
When linking with armlink the linker will resolve undefined symbols for
all undefined functions even if those functions the reference the
undefined symbol is never actually called.
This file provides weak stub implementations that are compiled when
CONFIG_MULTITHREADING=n to ensure proper linking.
Signed-off-by: Torsten Rasmussen <Torsten.Rasmussen@nordicsemi.no>
Support for ARM Compiler C library.
This commit add support for the ARM Compiler C libary in:
- Kconfig
- libc/armstdc
A new Kconfig symbol is added to allow a toolchain to specify if they
support linking with the minimal C library.
Also the CMake variable `TOOLCHAIN_HAS_NEWLIB` is exported to Kconfig
so that CONFIG_NEWLIB_LIBS can only be enabled if the toolchain has
newlib.
The armclang toolchain selects the CMake scatter file generator and
disables support for the LD linker template which is not supported by
armlink.
For the ARM Compiler C library, a corresponding lib/libc/armstc/ folder
with a minimal implementation to work with the ARM Compiler C library
is added.
Signed-off-by: Torsten Rasmussen <Torsten.Rasmussen@nordicsemi.no>
Cleanup and preparation commit for linker script generator.
Zephyr linker scripts provides start and end symbols for each larger
areas in the linker script.
The symbols _image_rom_start and _image_rom_end corresponds to the group
ROMABLE_REGION defined in the ld linker scripts.
The symbols _image_rodata_start and _image_rodata_end is not placed as
independent group but covers common-rom.ld, thread-local-storage.ld,
kobject-rom.ld and snippets-rodata.ld.
This commit align those names and prepares for generation of groups in
linker scripts.
The symbols describing the ROMABLE_REGION will be renamed to:
_image_rom_start -> __rom_region_start
_image_rom_end -> __rom_region_end
The rodata will also use the group symbol notation as:
_image_rodata_start -> __rodata_region_start
_image_rodata_end -> __rodata_region_end
Signed-off-by: Torsten Rasmussen <Torsten.Rasmussen@nordicsemi.no>
Suppress violation, because it is a deliberated deviation.
Noticed, that my previous PR #36420 comments were not correctly
detected by a static analysis tool. Only the first one item
"MISRAC2012-RULE_20_4-a" was detected and suppressed.
Change comment style, so each item will be suppressed.
Comment style defined in PR #36911 as the most suitable
for the analysis tool.
Signed-off-by: Maksim Masalski <maksim.masalski@intel.com>
Ring buffer claims that no synchronization is needed
when there is a single producer and single consumer.
However, recent changes have broken that promise since
indexes rewind mechanism was modifing head and tail
when consuming. Patch fixes that by spliting rewinding
of indexes so that producer rewinds tail only and
consumer rewinds head.
Signed-off-by: Krzysztof Chruscinski <krzysztof.chruscinski@nordicsemi.no>
Implement _istty hook as it is required for proper setup of
STDIN/STDOUT/STDERR buffering.
Signed-off-by: Eugeniy Paltsev <Eugeniy.Paltsev@synopsys.com>
Signed-off-by: Evgeniy Paltsev <PaltsevEvgeniy@gmail.com>
ARC MWDT toolchain misses stdout hooks implementation and
itimerspec structure in timespec header. Let's add them in
arcmwdt compatibility layer.
The implementation was inspired by libc-hooks.c for NEWLIB.
Signed-off-by: Eugeniy Paltsev <Eugeniy.Paltsev@synopsys.com>
Signed-off-by: Evgeniy Paltsev <PaltsevEvgeniy@gmail.com>
This migrates all the current iterable section usages to the external
API, dropping the "Z_" prefix:
Z_ITERABLE_SECTION_ROM
Z_ITERABLE_SECTION_ROM_GC_ALLOWED
Z_ITERABLE_SECTION_RAM
Z_ITERABLE_SECTION_RAM_GC_ALLOWED
Z_STRUCT_SECTION_ITERABLE
Z_STRUCT_SECTION_ITERABLE_ALTERNATE
Z_STRUCT_SECTION_FOREACH
Signed-off-by: Fabio Baltieri <fabiobaltieri@google.com>
This commit adds the newlib retargetable locking interface function
implementations in order to make newlib functions thread safe.
The newlib retargetable locking interface is internally called by the
standard C library functions provided by newlib to synchronise access
to the internal shared resources.
By default, the retargetable locking interface functions defined within
the newlib library are no-op. When multi-threading is enabled (i.e.
`CONFIG_MULTITHREADING=y`), the Zephyr-side retargetable locking
interface implementations override the default newlib implementation
and provide locking mechanism.
The retargetable locking interface may be called with either a static
(`__lock__...`) or a dynamic lock.
The static locks are statically allocated and initialised immediately
after kernel initialisation by `newlib_locks_prepare`.
The dynamic locks are allocated and de-allocated through the
`__retargetable_lock_init[_recursive]` and
`__retarget_lock_close_[recurisve]` functions as necessary by the
newlib functions. These locks are allocated in the newlib heap using
the `malloc` function when userspace is not enabled -- this is safe
because the internal multi-threaded malloc lock implementations
(`__malloc_lock` and `__malloc_unlock`) call the retargetable locking
interface with a static lock (`__lock__malloc_recursive_mutex`). When
userspace is enabled, the dynamic locks are allocated and freed through
`k_object_alloc` and `k_object_release`.
Note that the lock implementations used here are `k_mutex` and `k_sem`
instead of `sys_mutex` and `sys_sem` because the Zephyr kernel does not
currently support dynamic allocation of the latter. These locks should
be updated to use `sys_mutex` and `sys_sem` when the Zephyr becomes
capable of dynamically allocating them in the future.
Signed-off-by: Stephanos Ioannidis <root@stephanos.io>
Fix conversion drifts for large deltas by only applying float
operations when the skew requires it. This helps because not all
integers are representable as floats, so large integers are
neccessarily quantised when performing float operations.
When required, floating-point operations are now performed on doubles
instead of floats.
Fixes#37263.
Signed-off-by: Jordan Yates <jordan.yates@data61.csiro.au>
