This adds a very primitive coredump mechanism under subsys/debug
where during fatal error, register and memory content can be
dumped to coredump backend. One such backend utilizing log
module for output is included. Once the coredump log is converted
to a binary file, it can be used with the ELF output file as
inputs to an overly simplified implementation of a GDB server.
This GDB server can be attached via the target remote command of
GDB and will be serving register and memory content. This allows
using GDB to examine stack and memory where the fatal error
occurred.
Signed-off-by: Daniel Leung <daniel.leung@intel.com>
Sort entries alphabetically and cleanup top level menu for each
subsystem. Move stats subsystem Kconfig from debug into its own Kconfig.
Signed-off-by: Anas Nashif <anas.nashif@intel.com>
This one was appearing in the top level Kconfig menu when viewed in
menuconfig. Move it to where it belongs.
Signed-off-by: Anas Nashif <anas.nashif@intel.com>
The boot time measurement can also run with the HPET timer so there's
no reason to restrict it to APIC.
Signed-off-by: Johan Hedberg <johan.hedberg@intel.com>
In case of SMP (i.e. multiple execution units processing
the same list of tasks) we cannot use the same data structures for
getting data about active tasks as with just one processor (UP).
So until explicit support of SMP is added make sure we don't allow
to select both OPENOCD & SMP simultaneously.
Moreover starting from
commit a203d21962 ("kernel: remove legacy fields in _kernel")
this will lead to build-time error if MP_NUM_CPUS > 1.
Signed-off-by: Alexey Brodkin <abrodkin@synopsys.com>
This commit renames the Kconfig `FP_SHARING` symbol to `FPU_SHARING`,
since this symbol specifically refers to the hardware FPU sharing
support by means of FPU context preservation, and the "FP" prefix is
not fully descriptive of that; leaving room for ambiguity.
Signed-off-by: Stephanos Ioannidis <root@stephanos.io>
This commit renames the Kconfig `FLOAT` symbol to `FPU`, since this
symbol only indicates that the hardware Floating Point Unit (FPU) is
used and does not imply and/or indicate the general availability of
toolchain-level floating point support (i.e. this symbol is not
selected when building for an FPU-less platform that supports floating
point operations through the toolchain-provided software floating point
library).
Moreover, given that the symbol that indicates the availability of FPU
is named `CPU_HAS_FPU`, it only makes sense to use "FPU" in the name of
the symbol that enables the FPU.
Signed-off-by: Stephanos Ioannidis <root@stephanos.io>
I think people might be reading differences into 'if' and 'depends on'
that aren't there, like maybe 'if' being needed to "hide" a symbol,
while 'depends on' just adds a dependency.
There are no differences between 'if' and 'depends on'. 'if' is just a
shorthand for 'depends on'. They work the same when it comes to creating
implicit menus too.
The way symbols get "hidden" is through their dependencies not being
satisfied ('if'/'depends on' get copied up as a dependency on the
prompt).
Since 'if' and 'depends on' are the same, an 'if' with just a single
symbol in it can be replaced with a 'depends on'. IMO, it's best to
avoid 'if' there as a style choice too, because it confuses people into
thinking there's deep Kconfig magic going on that requires 'if'.
Going for 'depends on' can also remove some nested 'if's, which
generates nicer symbol information and docs, because nested 'if's really
are so simple/dumb that they just add the dependencies from both 'if's
to all symbols within.
Replace a bunch of single-symbol 'if's with 'depends on' to despam the
Kconfig files a bit and make it clearer how things work. Also do some
other minor related dependency refactoring.
The replacement isn't complete. Will fix up the rest later. Splitting it
a bit to make it more manageable.
(Everything above is true for choices, menus, and comments as well.)
Detected by tweaking the Kconfiglib parsing code. It's impossible to
detect after parsing, because 'if' turns into 'depends on'.
Signed-off-by: Ulf Magnusson <Ulf.Magnusson@nordicsemi.no>
Move rtt configuration options to drivers/debug and split the
systemview configuration.
drivers/debug will service for this class of drivers that are enabled in
debug mode only and provide a hardware interface to the system.
Signed-off-by: Anas Nashif <anas.nashif@intel.com>
Tracing subsystem is growing and although related to debugging, it does
deserve to belong into its own subsystem.
Signed-off-by: Anas Nashif <anas.nashif@intel.com>
Add Kconfig option TRACING_TEST which can be used to
customize tracing packet format (currently supporting
string format and data format) for testing purpose.
Signed-off-by: Wentong Wu <wentong.wu@intel.com>
Add TRACING_ISR Kconfig to help high latency backend working well.
Currently the ISR tracing hook function is put at the begining and
ending of ISR wrapper, when there is ISR needed in the tracing path
(especially tracing backend), it will cause tracing buffer easily
be exhausted if async tracing method enabled. Also it will increase
system latency if all the ISRs are traced. So add TRACING_ISR to
enable/disable ISR tracing here. Later a filter out mechanism based
on irq number will be added.
Signed-off-by: Wentong Wu <wentong.wu@intel.com>
First, this commit adds user interface in tracing_format.h which
can trace both string format and data format packet.
Second, it adds method both for asynchronous and synchronous way.
For asynchronous method, tracing packet will be buffered in tracing
buffer first, tracing thread will output the stream data with the
help of tracing backend when tracing thread get scheduled.
Third, it adds UART and USB tracing backend for asynchronous
tracing method, and adds POSIX tracing backend for synchronous
tracing way.
Also it can receive command from host to dynamically enable and
disable tracing to have host capture tracing data conveniently.
Signed-off-by: Wentong Wu <wentong.wu@intel.com>
Function cpu_stats_get_ns from CPU stats module returns
invalid time, because of unnecessary conversion into u32_t.
Higher bits of time value are removed during this conversion.
All time values are u64_t, so there is no need to convert anything.
Signed-off-by: Dominik Kilian <Dominik.Kilian@nordicsemi.no>
HAS_SEGGER_RTT is assigned by various Nordic boards, but assignments
have no effect on promptless symbols. This symbol is enabled through
being select'ed by SOC_SERIES_NRF52X.
Holyiot, nRF52833-PCA10100, nRF52840-PCA10056, and nRF52-PCA10040 only
assign HAS_SEGGER_RTT without assigning USE_SEGGER_RTT. They probably
meant to enable USE_SEGGER_RTT, so do that instead.
Also add a help text to HAS_SEGGER_RTT and a warning re. HAS_SEGGER_RTT
vs. USE_SEGGER_RTT to the documentation.
Flagged by https://github.com/zephyrproject-rtos/zephyr/pull/20742.
Signed-off-by: Ulf Magnusson <Ulf.Magnusson@nordicsemi.no>
RTT_CONSOLE depends on CONSOLE, but SEGGER_SYSTEMVIEW and
SHELL_BACKEND_RTT select RTT_CONSOLE without also selecting CONSOLE.
This leads to a build failure in drivers/console/rtt_console.c (compiled
if RTT_CONSOLE is enabled) unless CONSOLE is enabled some other way.
Symbols like CONFIG_RTT_RETRY_DELAY_MS won't be defined, because they
depend on CONSOLE.
Came up in https://github.com/zephyrproject-rtos/zephyr/pull/21860. This
fix was verified there.
(Would be nice to get rid of some 'select's in the console subsystem at
some point. This is a quick fix.)
Signed-off-by: Ulf Magnusson <Ulf.Magnusson@nordicsemi.no>
Add option to disable the assertion message, this makes all __ASSERT
behave as __ASSERT_NO_MSG instead.
Signed-off-by: Joakim Andersson <joakim.andersson@nordicsemi.no>
Add verbose option which would control if the assertion mechanism prints
any information at all. With this disabled they application will have to
use the stack-frame to locate the assertion location.
Signed-off-by: Joakim Andersson <joakim.andersson@nordicsemi.no>
Add Kconfig option to disable the conditional expression in the assert
that failed. This would save code space, and file and line provides
better information than the conditional expression in case where
the same expression would be asserted upon.
For example __ASSERT_NO_MSG(buf) wouldn't make much sense in
configuration where CONFIG_ASSERT_NO_FILE_INFO was enabled.
Signed-off-by: Joakim Andersson <joakim.andersson@nordicsemi.no>
SPIN_VALIDATE is, as it was previously, enabled per default when having
less than 4 CPUs and either having no flash or a flash size greater than
32kB.
Small targets, which needs to have asserts enabled, can chose to have
the spinlock validation enabled or not and thereby decide whether the
overhead added is acceptable or not.
Signed-off-by: Danny Oerndrup <daor@demant.com>
Remove leading/trailing blank lines in .c, .h, .py, .rst, .yml, and
.yaml files.
Will avoid failures with the new CI test in
https://github.com/zephyrproject-rtos/ci-tools/pull/112, though it only
checks changed files.
Move the 'target-notes' target in boards/xtensa/odroid_go/doc/index.rst
to get rid of the trailing blank line there. It was probably misplaced.
Signed-off-by: Ulf Magnusson <Ulf.Magnusson@nordicsemi.no>
Added leak suppression, by implementing __lsan_default_suppressions
function, for SDL2 and X11 library which are used by the SDL display
driver.
Signed-off-by: Jan Van Winkel <jan.van_winkel@dxplore.eu>
Mark the old time conversion APIs deprecated, leave compatibility
macros in place, and replace all usage with the new API.
Signed-off-by: Andy Ross <andrew.j.ross@intel.com>
This commit refactors kernel and arch headers to establish a boundary
between private and public interface headers.
The refactoring strategy used in this commit is detailed in the issue
This commit introduces the following major changes:
1. Establish a clear boundary between private and public headers by
removing "kernel/include" and "arch/*/include" from the global
include paths. Ideally, only kernel/ and arch/*/ source files should
reference the headers in these directories. If these headers must be
used by a component, these include paths shall be manually added to
the CMakeLists.txt file of the component. This is intended to
discourage applications from including private kernel and arch
headers either knowingly and unknowingly.
- kernel/include/ (PRIVATE)
This directory contains the private headers that provide private
kernel definitions which should not be visible outside the kernel
and arch source code. All public kernel definitions must be added
to an appropriate header located under include/.
- arch/*/include/ (PRIVATE)
This directory contains the private headers that provide private
architecture-specific definitions which should not be visible
outside the arch and kernel source code. All public architecture-
specific definitions must be added to an appropriate header located
under include/arch/*/.
- include/ AND include/sys/ (PUBLIC)
This directory contains the public headers that provide public
kernel definitions which can be referenced by both kernel and
application code.
- include/arch/*/ (PUBLIC)
This directory contains the public headers that provide public
architecture-specific definitions which can be referenced by both
kernel and application code.
2. Split arch_interface.h into "kernel-to-arch interface" and "public
arch interface" divisions.
- kernel/include/kernel_arch_interface.h
* provides private "kernel-to-arch interface" definition.
* includes arch/*/include/kernel_arch_func.h to ensure that the
interface function implementations are always available.
* includes sys/arch_interface.h so that public arch interface
definitions are automatically included when including this file.
- arch/*/include/kernel_arch_func.h
* provides architecture-specific "kernel-to-arch interface"
implementation.
* only the functions that will be used in kernel and arch source
files are defined here.
- include/sys/arch_interface.h
* provides "public arch interface" definition.
* includes include/arch/arch_inlines.h to ensure that the
architecture-specific public inline interface function
implementations are always available.
- include/arch/arch_inlines.h
* includes architecture-specific arch_inlines.h in
include/arch/*/arch_inline.h.
- include/arch/*/arch_inline.h
* provides architecture-specific "public arch interface" inline
function implementation.
* supersedes include/sys/arch_inline.h.
3. Refactor kernel and the existing architecture implementations.
- Remove circular dependency of kernel and arch headers. The
following general rules should be observed:
* Never include any private headers from public headers
* Never include kernel_internal.h in kernel_arch_data.h
* Always include kernel_arch_data.h from kernel_arch_func.h
* Never include kernel.h from kernel_struct.h either directly or
indirectly. Only add the kernel structures that must be referenced
from public arch headers in this file.
- Relocate syscall_handler.h to include/ so it can be used in the
public code. This is necessary because many user-mode public codes
reference the functions defined in this header.
- Relocate kernel_arch_thread.h to include/arch/*/thread.h. This is
necessary to provide architecture-specific thread definition for
'struct k_thread' in kernel.h.
- Remove any private header dependencies from public headers using
the following methods:
* If dependency is not required, simply omit
* If dependency is required,
- Relocate a portion of the required dependencies from the
private header to an appropriate public header OR
- Relocate the required private header to make it public.
This commit supersedes #20047, addresses #19666, and fixes#3056.
Signed-off-by: Stephanos Ioannidis <root@stephanos.io>
Disable "at exit" memory leak check by LSAN if building for a 64-bit
target with GCC. This is need to fix a potential deadlock in GCCs
libasan implementation.
Fixes#20122
Signed-off-by: Jan Van Winkel <jan.van_winkel@dxplore.eu>
Use this short header style in all Kconfig files:
# <description>
# <copyright>
# <license>
...
Also change all <description>s from
# Kconfig[.extension] - Foo-related options
to just
# Foo-related options
It's clear enough that it's about Kconfig.
The <description> cleanup was done with this command, along with some
manual cleanup (big letter at the start, etc.)
git ls-files '*Kconfig*' | \
xargs sed -i -E '1 s/#\s*Kconfig[\w.-]*\s*-\s*/# /'
Signed-off-by: Ulf Magnusson <Ulf.Magnusson@nordicsemi.no>
Default behavior is to include __FILE__ info with all of the Zephyr
assert macros, __ASSERT, __ASSERT_NO_MSG and __ASSERT_LOC. Setting the
ASSERT_NO_FILE_INFO kconfig option, replaces the __FILE__ with an
empty string, thus removing the file information from the asserts.
The intention here is to allow for code space limited devices to run
with asserts enabled.
Signed-off-by: Danny Oerndrup <daor@demant.com>
We now define z_is_idle_thread_object() in ksched.h,
and the repeated definitions of a function that does
the same thing now changed to just use the common
definition.
Signed-off-by: Andrew Boie <andrew.p.boie@intel.com>
The main and idle threads, and their associated stacks,
were being referenced in various parts of the kernel
with no central definition. Expose these in kernel_internal.h
and namespace with z_ appropriately.
The main and idle threads were being defined statically,
with another variable exposed to contain their pointer
value. This wastes a bit of memory and isn't accessible
to user threads anyway, just expose the actual thread
objects.
Redundance MAIN_STACK_SIZE and IDLE_STACK_SIZE defines
in init.c removed, just use the Kconfigs they derive
from.
Signed-off-by: Andrew Boie <andrew.p.boie@intel.com>
Various C and Assembly modules
make function calls to z_sys_trace_*. These merely call
corresponding functions sys_trace_*. This commit
is to simplify these by making direct function calls
to the sys_trace_* functions from these modules.
Subsequently, the z_sys_trace_* functions are removed.
Signed-off-by: Mrinal Sen <msen@oticon.com>
We don't really have docs on how fatal errors are induced
or handled. Provide some documentation that covers:
- Assertions (runtime and build)
- Kernel panic and oops conditions
- Stack overflows
- Other exceptions
- Exception handling policy
Signed-off-by: Andrew Boie <andrew.p.boie@intel.com>
The boot time measurement sample was giving bogus values on x86: an
assumption was made that the system timer is in sync with the CPU TSC,
which is not the case on most x86 boards.
Boot time measurements are no longer permitted unless the timer source
is the local APIC. To avoid issues of TSC scaling, the startup datum
has been forced to 0, which is in line with the ARM implementation
(which is the only other platform which supports this feature).
Cleanups along the way:
As the datum is now assumed zero, some variables are removed and
calculations simplified. The global variables involved in boot time
measurements are moved to the kernel.h header rather than being
redeclared in every place they are referenced. Since none of the
measurements actually use 64-bit precision, the samples are reduced
to 32-bit quantities.
In addition, this feature has been enabled in long mode.
Fixes: #19144
Signed-off-by: Charles E. Youse <charles.youse@intel.com>
Neither of these options is actually used; CPU_CLOCK_FREQ_MHZ appears
to have been part of x86 BOOT_TIME_MEASUREMENT at some point, and
PERFORMANCE_METRICS is the stillborn cousin of EXECUTION_BENCHMARKS.
Signed-off-by: Charles E. Youse <charles.youse@intel.com>
Remove ctf_middle layer and have only ctf_top and ctf_bottom.
Port functionality from ctf_middle to ctf_top and remove
ctf_middle.h file. Update associated documentation.
Signed-off-by: Mrinal Sen <msen@oticon.com>
Initial thread creation and tracing information
occurs with empty thread names. For better tracing information,
we need to a way to get actual thread names if they are set
in order to better track thread names and their IDs.
Signed-off-by: Nicholas Lowell <nlowell@lexmark.com>
Consistently place C++ use of extern "C" after all include directives,
within the negative branch of _ASMLANGUAGE if used.
Background from issue #17997:
Declarations that use C linkage should be placed within extern "C"
so the language linkage is correct when the header is included by
a C++ compiler.
Similarly #include directives should be outside the extern "C" to
ensure the language-specific default linkage is applied to any
declarations provided by the included header.
See: https://en.cppreference.com/w/cpp/language/language_linkage
Signed-off-by: Peter Bigot <peter.bigot@nordicsemi.no>
With the upcoming riscv64 support, it is best to use "riscv" as the
subdirectory name and common symbols as riscv32 and riscv64 support
code is almost identical. Then later decide whether 32-bit or 64-bit
compilation is wanted.
Redirects for the web documentation are also included.
Then zephyrbot complained about this:
"
New files added that are not covered in CODEOWNERS:
dts/riscv/microsemi-miv.dtsi
dts/riscv/riscv32-fe310.dtsi
Please add one or more entries in the CODEOWNERS file to cover
those files
"
So I assigned them to those who created them. Feel free to readjust
as necessary.
Signed-off-by: Nicolas Pitre <npitre@baylibre.com>
This commit adds the kernel.h include in order to provide
sys_clock_hw_cycles_per_sec() declaration.
Signed-off-by: Piotr Zięcik <piotr.ziecik@nordicsemi.no>
On some SoCs the frequency of the system clock is obtained at run time
as the exact configuration of the hardware is not known at compile time.
On such platforms using CONFIG_SYS_CLOCK_HW_CYCLES_PER_SEC define
directly introduces timing errors.
This commit replaces CONFIG_SYS_CLOCK_HW_CYCLES_PER_SEC by the call
to inline function sys_clock_hw_cycles_per_sec() which always returns
correct frequency of the system clock.
Signed-off-by: Piotr Zięcik <piotr.ziecik@nordicsemi.no>
The function sys_trace_thread_switched_out asserts in case
sys_trace_thread_switched_in was not called first. This is unintended
as tracing.h describes that out should be called before in, thus the
reverse of what the assert expects.
Fix assert on initial thread switch in, where out is called with
current_thread being NULL.
Signed-off-by: Danny Oerndrup <daor@demant.com>
Fixes -Werror=format: '%x' expects argument of type 'unsigned int', but
argument N has type 'long unsigned int'
Reproduced with sanitycheck -p bl652_dvk (or -p any other
HAS_SEGGER_RTT) and by adding CONFIG_SEGGER_SYSTEMVIEW=y to
samples/philosophers/prj.conf. sanitycheck adds -Werror.
Signed-off-by: Marc Herbert <marc.herbert@intel.com>
move misc/printk.h to sys/printk.h and
create a shim for backward-compatibility.
No functional changes to the headers.
A warning in the shim can be controlled with CONFIG_COMPAT_INCLUDES.
Related to #16539
Signed-off-by: Anas Nashif <anas.nashif@intel.com>
Under Unshared FP register mode we are not sharing the
FP context among different threads, so we do not need to
include the FP high registers bank in the thread.arch
container.
Signed-off-by: Ioannis Glaropoulos <Ioannis.Glaropoulos@nordicsemi.no>
Update the files which contain no license information with the
'Apache-2.0' SPDX license identifier. Many source files in the tree are
missing licensing information, which makes it harder for compliance
tools to determine the correct license.
By default all files without license information are under the default
license of Zephyr, which is Apache version 2.
Signed-off-by: Anas Nashif <anas.nashif@intel.com>
We renamed _sys_trace_thread_switched_in to
z_sys_trace_thread_switched_in, however we already had a function
named z_sys_trace_thread_switched_in. So rename z_sys_trace... to
z__sys_trace...
Fixes: #15184
Signed-off-by: Kumar Gala <kumar.gala@linaro.org>
Rename reserved function names in the subsys/ subdirectory except
for static _mod_pub_set and _mod_unbind functions in bluetooth mesh
cfg_srv.c which clash with the similarly named global functions.
Signed-off-by: Patrik Flykt <patrik.flykt@intel.com>
The legacy struct s_coopFloatReg was never being used, though it was
an empty struct (not wasting space), some symbols were being generate
for it.
Nevertheless, neither C99 nor C11 allow empty structs, so this
was also a violation to the C standards.
Signed-off-by: Flavio Ceolin <flavio.ceolin@intel.com>
Signed-off-by: Anas Nashif <anas.nashif@intel.com>
Linking to API material requires knowing the pecularities of how
doxygen, sphinx, and breathe work. In an attempt to hide some of this
we're preparing the current docs to allow use of configuration defaults
that will let us more simply use a default role that will hunt for a
reference target in the various domains that are available by using a
default "role" of "all". This will let us use the simple notation
`functionname` or `typename` without fully specifying the reference as
:c:func:`functionname`.
This patch cleans up exising docs that were (incorrectly) using single
backtics where double backtics should have been used, and also found
some typos (such as a space between the role name and the reference,
such as :file: `filename`, and a missing colon such as
c:func:`functionname`)
This is a start to address issue #14313
Signed-off-by: David B. Kinder <david.b.kinder@intel.com>
Maybe this is some "just in case" thing that got copied around. There's
no need to have a blank line at the beginning or end of Kconfig files.
Signed-off-by: Ulf Magnusson <Ulf.Magnusson@nordicsemi.no>
To match the signature of k_thread_name_get(), add a const modifier to
the local variable definition.
Signed-off-by: Carles Cufi <carles.cufi@nordicsemi.no>
Trivial patch to recover the task name from the task structure when it
is present and include it in the information returned to SystemView.
When these data are not present patch will revert to old behaviour.
Signed-off-by: Dave Marples <dave@marples.net>
Every time the array of offsets was changed, it was changed in a
backward compatible way by appending elements to the end. The version
number was incremented to inform OpenOCD about the existence of the new
elements. But the patch for OpenOCD to support Zephyr has never been
updated to support anything else than version 0, causing OpenOCD to
reject recent Zephyr versions. So the idea of using a version number to
track compatible changes didn't work out.
Therefore add another symbol that can be read by OpenOCD to get the
number of elements in the array. This value is automatically calculated
during compilation. The version number element should from now on be
incremented only for incompatible changes.
Fixes: #13448
Signed-off-by: Daniel Glöckner <dg@emlix.com>
Some more were added since the cleanup pass in June 2018. See e.g.
commit 2d50da70a1 ("drivers: ipm: Kconfig: Remove redundant 'default n'
properties") for a motivation. It also avoids people wondering whether
or not they need to put in 'default n'.
Signed-off-by: Ulf Magnusson <Ulf.Magnusson@nordicsemi.no>
This commit implements a CTF-backend for Zephyr's tracing API.
The CTF-backend itself is split in a middle-layer and a bottom-layer.
- Middle-layer decides the payload in event transactions,
- Bottom-layer implements the IO transport.
A simple POSIX bottom-layer is provided so far.
Signed-off-by: François Delawarde <fnde@oticon.com>
Change fixes problem with mutexes and initialization for SystemView,
adds config options to:
- choose if SystemView should start logging events on system start
- select SystemView RTT buffer size
Signed-off-by: Marek Pieta <Marek.Pieta@nordicsemi.no>
We have dependency on this module in code which is part of Zephyr. When
this module is split out of the tree we need to be able to build. Move
this Kconfig part to be part of zephyr and keep the external code in
ext/ with plan to split it out on the future.
Signed-off-by: Anas Nashif <anas.nashif@intel.com>
Fix misspellings in documentation (.rst, Kconfig help text, and .h
doxygen API comments), missed during regular reviews.
Signed-off-by: David B. Kinder <david.b.kinder@intel.com>
Fix issue caused by 3fc497ac9a
This change removes `rtt` and `systemview` from header includes
as these are already placed in the path.
Also `SEGGER_SYSVIEW_ConfDefaults.h` header included from
`SEGGER_SYSVIEW_Int.h` is placed higher to make sure `INLINE`
definition is properly visible.
Signed-off-by: Pawel Dunaj <pawel.dunaj@nordicsemi.no>
Change adds CPU stats module for tracing hooks. Module provides
information about percent of CPU usage based on tracing hooks
for threads switching in and out, interrupts enters and exits.
cpu_stats only distinguishes between idle thread, non idle
thread and scheduler.
Signed-off-by: Marek Pieta <Marek.Pieta@nordicsemi.no>
Architecture init code and/or HAL layers often have a working
"putchar" routine available long before the Zephyr driver layer is
initialized.
Make the default printk() output a weak symbol, so it can be
overridden on these platforms.
Also remove the kconfig depedency on CONSOLE_HAS_DRIVER, as this is a
non-driver mechanism.
Signed-off-by: Andy Ross <andrew.j.ross@intel.com>
These changes were obtained by running a script created by
Ulf Magnusson <Ulf.Magnusson@nordicsemi.no> for the following
specification:
1. Read the contents of all dts_fixup.h files in Zephyr
2. Check the left-hand side of the #define macros (i.e. the X in
#define X Y)
3. Check if that name is also the name of a Kconfig option
3.a If it is, then do nothing
3.b If it is not, then replace CONFIG_ with DT_ or add DT_ if it
has neither of these two prefixes
4. Replace the use of the changed #define in the code itself
(.c, .h, .ld)
Additionally, some tweaks had to be added to this script to catch some
of the macros used in the code in a parameterized form, e.g.:
- CONFIG_GPIO_STM32_GPIO##__SUFFIX##_BASE_ADDRESS
- CONFIG_UART_##idx##_TX_PIN
- I2C_SBCON_##_num##_BASE_ADDR
and to prevent adding DT_ prefix to the following symbols:
- FLASH_START
- FLASH_SIZE
- SRAM_START
- SRAM_SIZE
- _ROM_ADDR
- _ROM_SIZE
- _RAM_ADDR
- _RAM_SIZE
which are surprisingly also defined in some dts_fixup.h files.
Finally, some manual corrections had to be done as well:
- name##_IRQ -> DT_##name##_IRQ in uart_stm32.c
Signed-off-by: Andrzej Głąbek <andrzej.glabek@nordicsemi.no>
Move misc/Kconfig options to where they belong. misc/Kconfig was used as
a catch-all, but we are now able to put things in a better place.
Signed-off-by: Anas Nashif <anas.nashif@intel.com>
There was an struct and a variable called _kernel. This is error prone
and a MISRA-C violation. It is changing the struct to have a unique
identifier.
MISRA-C rule 5.8
Signed-off-by: Flavio Ceolin <flavio.ceolin@intel.com>
Adds preemptive and cooperative floating point contexts to the openocd
offsets array for arm and x86 architectures.
Signed-off-by: Maureen Helm <maureen.helm@nxp.com>
Adds the thread name to the openocd offsets array so openocd and pyocd
can show thread names in the debugger.
Signed-off-by: Maureen Helm <maureen.helm@nxp.com>
This header is private data and we shouldn't (and aren't) using it in
the tracing_sysview.h. SystemView tracing works fine without it, as
tested with the philosophers sample.
This commit fixes the build when bluetooth SMP and SystemView tracing
are used, because the kernel_structs.h inclusion ends up pulling in
kernel_internal.h, which declares smp_init(), whose declaration
conflicts with another internal routine by the same name in
subsys/bluetooth/host/smp.c.
Signed-off-by: Marti Bolivar <marti@foundries.io>
Bool symbols implicitly default to 'n'.
A 'default n' can make sense e.g. in a Kconfig.defconfig file, if you
want to override a 'default y' on the base definition of the symbol. It
isn't used like that on any of these symbols though.
Remove some 'default ""' properties on string symbols too.
Also make definitions more consistent by converting some
config FOO
<type>
prompt "foo"
definitions to a shorter form:
config FOO
<type> "foo"
This shorthand works for int/hex/string symbols too, not just for bool
symbols.
Signed-off-by: Ulf Magnusson <Ulf.Magnusson@nordicsemi.no>
Address Sanitizer helps finding issues related to memory: buffer
overflows, usage of uninitialized memory, etc. This is available in
both Clang and GCC for a while, and, since the POSIX port is only
meant for testing, this will help find issues.
Signed-off-by: Leandro Pereira <leandro.pereira@intel.com>
Signed-off-by: Alberto Escolar Piedras <alpi@oticon.com>
This keeps biting us; sanitycheck turns on assertions by
default for tests, but standalone builds, or builds done
for other test infrastructure do not. Put all builds in
the same state.
Specific tests (such as benchmarks) can override this with
CONFIG_FORCE_NO_ASSERT.
Signed-off-by: Andrew Boie <andrew.p.boie@intel.com>
This patch restricts the stack sentinel to only be allowed if the
USERSPACE configuration option is not set. The stack sentinel feature
is redundant if used in conjunction with the USERSPACE, due to the
protection mechanisms in place for stacks.
Signed-off-by: Andy Gross <andy.gross@linaro.org>
The mbedtls test is hitting a compiler bug where two subtests will
soft fail on qemu_xtensa when assertions are enabled. This is despite
the fact that:
+ The failure is entirely internal to the mbedtls suite.
+ The mbedtls code does not use zephyr asserts
+ The mbedtls code does not call into zephyr code that might assert.
+ The behavior persists even when an irq_lock() is held across the
entire test, ruling out any asserts in interrupt/exception context.
+ And EVEN WHEN the mbedtls library blobs are bytewise identical
between assert and non-assert cases.
The bug seems to be a layout thing where the mbedtls code behavior
differently based on code address and/or link-time optimizations
(xtensa has a few).
Unfortunately sanitycheck enables assertions by setting CFLAGS
directly and not via kconfig, so we can't fix this by turning the
feature off in an app right now. This patch adds a simple "override"
flag that can be set by apps like this that hit bugs.
Again, note that zephyr assertions are not used nor needed by this one
test.
Signed-off-by: Andy Ross <andrew.j.ross@intel.com>
This feature is X86 only and is not used or being tested. It is legacy
feature and no one can prove it actually works. Remove it until we have
proper documentation and samples and multi architecture support.
Signed-off-by: Anas Nashif <anas.nashif@intel.com>
Introducing CMake is an important step in a larger effort to make
Zephyr easy to use for application developers working on different
platforms with different development environment needs.
Simplified, this change retains Kconfig as-is, and replaces all
Makefiles with CMakeLists.txt. The DSL-like Make language that KBuild
offers is replaced by a set of CMake extentions. These extentions have
either provided simple one-to-one translations of KBuild features or
introduced new concepts that replace KBuild concepts.
This is a breaking change for existing test infrastructure and build
scripts that are maintained out-of-tree. But for FW itself, no porting
should be necessary.
For users that just want to continue their work with minimal
disruption the following should suffice:
Install CMake 3.8.2+
Port any out-of-tree Makefiles to CMake.
Learn the absolute minimum about the new command line interface:
$ cd samples/hello_world
$ mkdir build && cd build
$ cmake -DBOARD=nrf52_pca10040 ..
$ cd build
$ make
PR: zephyrproject-rtos#4692
docs: http://docs.zephyrproject.org/getting_started/getting_started.html
Signed-off-by: Sebastian Boe <sebastian.boe@nordicsemi.no>
To avoid making a system call for every character emitted, there is now
a small line buffer if userspace is enabled. The interface to the kernel
is a new system call which takes a sized buffer of console data.
If userspace is not enabled this works like before.
Signed-off-by: Andrew Boie <andrew.p.boie@intel.com>
openocd object was put in a library causing it to be stripped. We want
those symbols in the final ELF to allow debugging with openocd, building
those as objects like the rest of the kernel keeps the symbols in the
kernel.
Signed-off-by: Anas Nashif <anas.nashif@intel.com>
This is unmaintained and currently has no known users. It was
added to support a Wind River project. If in the future we need it
again, we should re-introduce it with an exception-based mechanism
for catching out-of-bounds memory queries from the debugger.
The mem_safe subsystem is also removed, it is only used by the
GDB server. If its functionality is needed in the future, it
shoudl be replaced with an exception-based mechanism.
The _image_{ram, rom, text}_{start, end} linker variables have
been left in place, they will be re-purposed and expanded to
support memory protection.
Signed-off-by: Andrew Boie <andrew.p.boie@intel.com>
This places a sentinel value at the lowest 4 bytes of a stack
memory region and checks it at various intervals, including when
servicing interrupts or context switching.
This is implemented on all arches except ARC, which supports stack
bounds checking directly in hardware.
Signed-off-by: Andrew Boie <andrew.p.boie@intel.com>
This should fix the grouping for debugging options appearing in the
main "menuconfig" menu.
Change-Id: I7ddf3a6f3d025bf82ba63099b30e47a40d7c3187
Signed-off-by: Leandro Pereira <leandro.pereira@intel.com>
Convert code to use u{8,16,32,64}_t and s{8,16,32,64}_t instead of C99
integer types.
Jira: ZEP-2051
Change-Id: Icbf9e542b23208890a3a32358447d44cdc274ef1
Signed-off-by: Kumar Gala <kumar.gala@linaro.org>
This is a start to move away from the C99 {u}int{8,16,32,64}_t types to
Zephyr defined u{8,16,32,64}_t and s{8,16,32,64}_t. This allows Zephyr
to define the sized types in a consistent manor across all the
architectures we support and not conflict with what various compilers
and libc might do with regards to the C99 types.
We introduce <zephyr/types.h> as part of this and have it include
<stdint.h> for now until we transition all the code away from the C99
types.
We go with u{8,16,32,64}_t and s{8,16,32,64}_t as there are some
existing variables defined u8 & u16 as well as to be consistent with
Zephyr naming conventions.
Jira: ZEP-2051
Change-Id: I451fed0623b029d65866622e478225dfab2c0ca8
Signed-off-by: Kumar Gala <kumar.gala@linaro.org>
CONFIG_* usually come from Kconfig, rename variables that are locally
defined to avoid confusion about where they are set.
Change-Id: I402713e6f852907e75be4bc2b916a7d15dd5649c
Signed-off-by: Anas Nashif <anas.nashif@intel.com>
CONFIG_DEBUG_INFO was disabled for IAMCU targets. As per Jira update forked
arch/code is gone. So it should not block enabling DEBUG_INFO for IAMCU.
Currently CONFIG_DEBUG_INFO depends on (x86 = y && !X86_IAMCU)
CONFIG_DEBUG_INFO can not be set for IAMCU. this patch removes dependency.
Jira: ZEP-601
Change-Id: Ib5635096f83f7b931c277b667a55c6d54f8e946a
Signed-off-by: Youvedeep Singh <youvedeep.singh@intel.com>
This was flagged by ISSM icx compiler.
JIRA: ZEP-1806
Change-Id: Iebd04febbdce9b92a4d0cae986ca7f84f4da58a0
Signed-off-by: Jithu Joseph <jithu.joseph@intel.com>
In order for OpenOCD to have a high-level view of an RTOS, it uses the
GDB protocol to obtain symbols from the system.
The GDB protocol, however, does not allow obtaining fields from
structures directly, and hardcoding offsets is not only brittle (due to
possibly different architectures or changes in the code), it's also
infeasible considering Zephyr is highly-configurable and parts of key
structs can be compiled in or out.
Export an array with offsets for these key structs. Also add a version
element in that array to allow changes in those structs.
Change-Id: I83bcfa0a7bd57d85582e5ec6efe70e1cceb1fc51
Signed-off-by: Leandro Pereira <leandro.pereira@intel.com>
Replace the existing Apache 2.0 boilerplate header with an SPDX tag
throughout the zephyr code tree. This patch was generated via a
script run over the master branch.
Also updated doc/porting/application.rst that had a dependency on
line numbers in a literal include.
Manually updated subsys/logging/sys_log.c that had a malformed
header in the original file. Also cleanup several cases that already
had a SPDX tag and we either got a duplicate or missed updating.
Jira: ZEP-1457
Change-Id: I6131a1d4ee0e58f5b938300c2d2fc77d2e69572c
Signed-off-by: David B. Kinder <david.b.kinder@intel.com>
Signed-off-by: Kumar Gala <kumar.gala@linaro.org>
replace include <nanokernel.h> with <kernel.h> everywhere and also fix
any remaining mentions of nanokernel.
Keep the legacy samples/tests as is.
Change-Id: Iac48447bd191e83f21a719c69dc26233216d08dc
Signed-off-by: Anas Nashif <anas.nashif@intel.com>
