These functions help the code to be more self-documenting. Use them to
make the code's intent clearer.
Signed-off-by: Bradley Bolen <bbolen@lexmark.com>
Replace CONFIG_CPU_CORTEX_R with CONFIG_ARMV7_R since it is clearer with
respect to the difference between v7 and v8 Cortex-R.
Signed-off-by: Bradley Bolen <bbolen@lexmark.com>
When calling a syscall, the SVC routine will now elevate the thread to
privileged mode and exit the SVC setting the return address to the
syscall handler. When the thread is swapped back in, it will be running
z_do_arm_syscall in system mode. That function will run the syscall
then automatically return the thread to usr mode.
This allows running the syscall in sys mode on a thread so that we can
use syscalls that sleep without doing unnatural things. The previous
implementation would enable interrupts while still in the SVC call and
do weird things with the nesting count. An interrupt could happen
during this time when the syscall was still in the exception state, but
the nested count had been decremented too soon. Correctness of the
nested count is important for future floating point unit work.
The Cortex-R behavior now matches that of Cortex-M.
Signed-off-by: Bradley Bolen <bbolen@lexmark.com>
Non-standard `jalr rd, rs` pseudo-instructions are used.
This commit changes them to `ret` for standard return pseudo-instruction
or `jalr rd, rs, 0` for no offset jump register and link.
Fixes#41100.
Signed-off-by: Henry Hsieh <r901042004@yahoo.com.tw>
Some XCC toolchains do not provide atexit() which results
in undefined reference error. So add a weak dummy atexit()
for this siutation.
Signed-off-by: Daniel Leung <daniel.leung@intel.com>
Turns out that xt-xcc will bail when faced with a real core-isa.h (it
wants you to rely on the builtins in the compiler). Undefine __XCC__
to force it to actually parse and emit declarations for its own
header.
(Also adds a newline to the generated one-line C file to silence a warning)
Signed-off-by: Andy Ross <andrew.j.ross@intel.com>
We had a similar sequence for interrupt return, where we were
selecting (actually only for the benefit of qemu) the highest priority
EPCn/EPSn registers for our RFI instruction. That works much better
in python the preprocessor.
Signed-off-by: Andy Ross <andrew.j.ross@intel.com>
The kernel coherence cache flush code was using a scratch register to
mark the top of the stack. Likewise a good candidate for ZSR use.
Signed-off-by: Andy Ross <andrew.j.ross@intel.com>
This is actually Cadence-authored code, but its use of EXCSAVE1 as a
sideband input to the exception handler is very much in the same
family of tricks. Use ZSR assignments here too.
Signed-off-by: Andy Ross <andrew.j.ross@intel.com>
Zephyr likes to use the various Xtensa scratch registers for its own
purposes in several places. Unfortunately, owing to the
configurability of the architecture, we have to use different
registers for different platforms. This has been done so far with a
collection of different tricks, some... less elegant than others.
Put it all in one place. This is a python script that emites a
"zsr.h" header with register assignments for all the existing users.
Signed-off-by: Andy Ross <andrew.j.ross@intel.com>
MIPS (Microprocessor without Interlocked Pipelined Stages) is a
instruction set architecture (ISA) developed by MIPS Computer
Systems, now MIPS Technologies.
This commit provides MIPS architecture support to Zephyr. It is
compatible with the MIPS32 Release 1 specification.
Signed-off-by: Antony Pavlov <antonynpavlov@gmail.com>
This moves CONFIG_MMU and its children from arch/Kconfig into
kernel/Kconfig. These are used to enable kernel support of MMU
so they should be under kernel/.
Signed-off-by: Daniel Leung <daniel.leung@intel.com>
Currently, is_user_mode is 8-byte in riscv64 and it breaks a 4-byte PMP
region protecting it. Because is_user_mode is a single flag, we could
just fix it's size to 4-byte in both riscv32 and riscv64.
Signed-off-by: Jim Shu <cwshu09@gmail.com>
In RV64, all general-purpose registers and pmpcfg CSR are 64-bit
instead of 32-bit. Fix these registers and related C variables/literals
to be 32/64-bit compatible.
Signed-off-by: Jim Shu <cwshu09@gmail.com>
Avoid setting the switch_handler in the z_get_next_switch_handle() code
when the context is not fully saved yet to avoid a race against other
cores waiting on wait_for_switch().
See issue #40795 and discussion in #41840
Signed-off-by: Carlo Caione <ccaione@baylibre.com>
For functions returning nothing, there is no need to document
with @return, as Doxgen complains about "documented empty
return type of ...".
Signed-off-by: Daniel Leung <daniel.leung@intel.com>
For functions returning nothing, there is no need to document
with @return, as Doxgen complains about "documented empty
return type of ...".
Signed-off-by: Daniel Leung <daniel.leung@intel.com>
For functions returning nothing, there is no need to document
with @return, as Doxgen complains about "documented empty
return type of ...".
Signed-off-by: Daniel Leung <daniel.leung@intel.com>
For functions returning nothing, there is no need to document
with @return, as Doxgen complains about "documented empty
return type of ...".
Signed-off-by: Daniel Leung <daniel.leung@intel.com>
For functions returning nothing, there is no need to document
with @return, as Doxgen complains about "documented empty
return type of ...".
Signed-off-by: Daniel Leung <daniel.leung@intel.com>
For functions returning nothing, there is no need to document
with @return, as Doxgen complains about "documented empty
return type of ...".
Signed-off-by: Daniel Leung <daniel.leung@intel.com>
For functions returning nothing, there is no need to document
with @return, as Doxgen complains about "documented empty
return type of ...".
Signed-off-by: Daniel Leung <daniel.leung@intel.com>
For functions returning nothing, there is no need to document
with @return, as Doxgen complains about "documented empty
return type of ...".
Signed-off-by: Daniel Leung <daniel.leung@intel.com>
This is trick (mapping RAM twice so you can use alternate Region
Protection Option addresses to control cacheability) is something any
Xtensa hardware designer might productively choose to do. And as it
works really well, we should encourage that by making this a generic
architecture feature for Zephyr.
Now everything works by setting two kconfig values at the soc level
defining the cached and uncached regions. As long as these are
correct, you can then use the new arch_xtensa_un/cached_ptr() APIs to
convert between them and a ARCH_XTENSA_SET_RPO_TLB() macro that
provides much smaller initialization code (in C!) than the HAL
assembly macros. The conversion routines have been generalized to
support conversion between any two regions.
Note that full KERNEL_COHERENCE still requires support from the
platform linker script, that can't be made generic given the way
Zephyr does linkage.
Signed-off-by: Andy Ross <andrew.j.ross@intel.com>
This commit enable PMP-based memory protection of code and rodata
instead of relying on non-writable real HW (e.g. flash). Use static
PMP region with PMP Lock bit to protect them in both user/supervisor
mode.
Signed-off-by: Jim Shu <cwshu@andestech.com>
Implement new mechanism of arch_buffer_validate() to support checking
static PMP regions. This is preparation patch for code/rodate protection
via RISC-V PMP.
Signed-off-by: Jim Shu <cwshu@andestech.com>
Thread init related to PMP & userspace contains 5 parts:
1. User/supervisor thread clear PMP context
2. User thread clear it's context
3. User/supervisor thread assign to different entry
4. Supervisor thread assign mstatus.MPRV for M-mode PMP protection
5. User/supervisor thread setup PMP regions of stack guard if enabled
Signed-off-by: Jim Shu <cwshu@andestech.com>
Reorder the memory domain async functions to:
arch_mem_domain_partition_add()
arch_mem_domain_partition_remove()
arch_mem_domain_thread_add()
arch_mem_domain_thread_remove()
Signed-off-by: Jim Shu <cwshu@andestech.com>
Simplify multiple ifdef case in computing region number. Also move these
macros to core_pmp.c because they are only used in one file.
Signed-off-by: Jim Shu <cwshu@andestech.com>
Using struct riscv_pmp_region to modulize PMP CSR handling, including
PMP NAPOT/TOR mode handling. This patch can make us more easily to
add/remove RISC-V PMP regions without considering register handling.
Signed-off-by: Jim Shu <cwshu@andestech.com>
Cleanup logging API in core_pmp.c. Remove old printf-based debugging API
and change the log module of PMP to individual MPU log module.
Signed-off-by: Jim Shu <cwshu@andestech.com>
This commit add 2 minor fixes of IRQ handling:
1. Save caller registers before calling z_riscv_configure_stack_guard()
in RISC-V assembly.
2. reschedule and no_reschdule code paths use different interrupt
return path after supporting of CONFIG_PMP_STACK_GUARD. back-to-back
interrupt checking is in the reschedule code path so that it should
jump to interrupt return path of reschedule.
Signed-off-by: Jim Shu <cwshu09@gmail.com>
If no thread use this memory domain, there isn't any user PMP region
translated from memory partitions in domain. In this case, memory
partition removal doesn't need to remove user PMP region and
arch_mem_domain_partition_remove() could just successfully return.
Signed-off-by: Jim Shu <cwshu@andestech.com>
Although CONFIG_USERSPACE is enabled, there are supervisor threads who
don't have privileged stack using exception handler. Only let user
threads to switch to privileged stack in exception handler.
Signed-off-by: Jim Shu <cwshu@andestech.com>
In fact, in case of VT-D being enabled, it will require to get an
address and data for its own MSI based interrupts which cannot be
remapped (i.e.: will directly go to the relevant APIC).
This is necessary to get the Fault event supported in VT-D.
Signed-off-by: Tomasz Bursztyka <tomasz.bursztyka@linux.intel.com>
This will not only be used by MSI remapping but by all relevant
interrupts.
Fix also IRTE settings:
- handle x2apic for destination id
- destination mode is always logical (as for IOAPIC)
Signed-off-by: Tomasz Bursztyka <tomasz.bursztyka@linux.intel.com>
SHV bit depends on the number of vectors allocated.
If it's facing a multi-vector MSI array, it will set the bit.
If not the bit must be 0.
Signed-off-by: Tomasz Bursztyka <tomasz.bursztyka@linux.intel.com>
Refactor to handle this case. This is valid only when MSI multi-vector
feature is enabled.
Signed-off-by: Tomasz Bursztyka <tomasz.bursztyka@linux.intel.com>
As all interruption need to go through VT-D, calling vt-d remap will
happen on lower level as seen next, so make sure all pcie related
irq/vector get tighten to their respective allocated IRTE.
Signed-off-by: Tomasz Bursztyka <tomasz.bursztyka@linux.intel.com>
Allocate an IRTE for all irq being connected through
arch_irq_connect_dynamic(). This will be mandatory since VT-D expects to
filter all interruptions (but the one it generates, as we will see
later).
Taking into account CONFIG_INTEL_VTD_ICTL_XAPIC_PASSTHROUGH, which could
help for debugging.
Signed-off-by: Tomasz Bursztyka <tomasz.bursztyka@linux.intel.com>
There is no need to differentiate with multi-vector or not, MSI vs
MSI-x: all need to be remapped if Intel VT-D is on.
Signed-off-by: Tomasz Bursztyka <tomasz.bursztyka@linux.intel.com>
Enable ARCH_EXCEPT macro for non-usermode scenario for RISC-V
Macro will now raise an illegal instruction exception so that mepc will
hold expected value in exception handler, and generated coredump can
reconstruct the failing stack
Coredump tests running on renode (for RISC-V) can now utilize fatal error
path through k_panic
Signed-off-by: Mark Holden <mholden@fb.com>
