Add support for devices that use the kinetis
GPIO/PORT scheme but with the slight modification
that the interrupt control bits are in the GPIO
peripheral instead of the PORT peripheral.
Signed-off-by: Declan Snyder <declan.snyder@nxp.com>
The enum define is not implemented with the same name on all SoC's.
Use the register define instead.
Signed-off-by: Mahesh Mahadevan <mahesh.mahadevan@nxp.com>
1. Add support to enable PORT control clocks
2. Add support for LP Flexcomm
3. MCX family has a different Clock API for USDHC.
Signed-off-by: Mahesh Mahadevan <mahesh.mahadevan@nxp.com>
The Low Power Flexcomm driver manages the interrupt handling
and provides an API to register interrupt callbacks.
Register the NXP LPUART interrupt handler.
Signed-off-by: Mahesh Mahadevan <mahesh.mahadevan@nxp.com>
1. This driver allows to configure the Low Power Flexcomm
interface as a UART, SPI or I2C device.
2. Manages the interrupts and dispatches it to the
appropriate device driver.
3. A Flexcomm interface can be configured to be used as
I2C and UART device. However a SPI device cannot be used
concurrently with I2C or UART. Add checks for this feature.
Signed-off-by: Mahesh Mahadevan <mahesh.mahadevan@nxp.com>
This binding is for the NXP FlexComm Interface. The
driver will setup an interface for use as a UART, SPI
or I2C device.
Signed-off-by: Mahesh Mahadevan <mahesh.mahadevan@nxp.com>
RD RW612 BGA board is built targeting secure mode execution. If
CONFIG_TRUSTED_EXECUTION_SECURE is not set, base address declarations in
CMSIS header files will be incorrect, causing a variety of issues. Fix
this.
Signed-off-by: Daniel DeGrasse <daniel.degrasse@nxp.com>
Add connect match for dialing PPP connection.
Ensure PDP authentication is disabled.
Request manufacturer, firmware version, and IMSI from the modem.
Signed-off-by: Ryan Erickson <ryan.erickson@lairdconnect.com>
Add new commands to manage the Encrypted Advertising Data feature.
Overview of those new commands:
- `bt encrypted-ad set-keys`: set key materials (session key and
initialisation vector) used for encrypted and decryption of EAD;
- `bt encrypted-ad add-ad`: store a given advertising data structure;
- `bt encrypted-ad add-ead`: encrypt the given advertising data
structres and store the generated AD structure;
- `bt encrypted-ad commit-ad`: set the AD of the selected advertiser
with the stored AD;
- `bt encrypted-ad clear-ad`: remove all stored AD;
- `bt encrypted-ad decrypt-scan`: decrypt data using the previously set
key materials when receiving AD with type `0x31`.
The documentation of the Bluetooth Shell has been updated to include
those new commands.
Signed-off-by: Théo Battrel <theo.battrel@nordicsemi.no>
Spawns n instances of the bt-shell in separate xterm windows.
Assumes in-tree build of the shell, can optionally specify another .exe
image.
Also add snippet for that use-case (`-S xterm-native-shell`).
Signed-off-by: Jonathan Rico <jonathan.rico@nordicsemi.no>
For breaking API changes, let's mention explicity the PR should
be labelled with the "Architecture Review" label, as that is
the one we base the automation on.
As otherwise it is not clear enough for developers that they
should add it, and without it (and the automation surrounding it),
it is too easy for a PR to be merged by mistake.
Signed-off-by: Alberto Escolar Piedras <alberto.escolar.piedras@nordicsemi.no>
Support MCI_IO_MUX pinctrl in LPC GPIO driver
Signed-off-by: Declan Snyder <declan.snyder@nxp.com>
Co-authored-by: Daniel DeGrasse <daniel.degrasse@nxp.com>
these list of patches add support the Starfive Visionfive2
SBC based on the JH7110 SoC. Board identifier is `visionfive2`.
Signed-off-by: Kanak Shilledar <kanakshilledar111@protonmail.com>
Signed-off-by: Pratik Farkase <pratik.farkase@wsisweden.com>
These list of files add basic support for StarFive
JH7110 SOC Device Tree includes for VisionFive2
board.
Signed-off-by: Pratik Farkase <pratik.farkase@wsisweden.com>
See https://github.com/zephyrproject-rtos/zephyr/discussions/69997
The driver thinks that when there are zero touches, the screen is
pressed. This changes it so zero touches mean the screen is not
pressed.
Also, multi-touch is now considered a single touch, and the
TOUCH_ID is checked so that only valid touches are registered.
Signed-off-by: Glenn Andrews <glenn.andrews.42@gmail.com>
On some content-types, it might be impossible to
send strings with size of zero.
Therefore empty URI should also allow cases
where strlen() is zero.
Signed-off-by: Seppo Takalo <seppo.takalo@nordicsemi.no>
Adding Fin Maaß <f.maass@vogl-electronic.com> (maass-hamburg) as
a collaborator to the DHCPv4.
Related PR #69992
Signed-off-by: Jukka Rissanen <jukka.rissanen@nordicsemi.no>
Previously, CONFIG_MAX_TIMER_COUNT and CONFIG_MSG_COUNT_MAX were
used without checking if CONFIG_TIMER and CONFIG_POSIX_MQUEUE
were enabled.
Use Z_SC_VAL_IFDEF() to conditionally define those constants
based on their gating Kconfig values, otherwise, they are defined
to -1.
Signed-off-by: Christopher Friedt <cfriedt@meta.com>
When the AUX_ADV_IND and AUX_SYNC_IND are close to each
other, the duration between them is not sufficient to
schedule a new instance of ticker to establish
synchronization. This processing time introduces latencies
detected by the prepare callback.
When the sync offset is low, schedule the start of the
reception to next periodic interval.
Signed-off-by: Vinayak Kariappa Chettimada <vich@nordicsemi.no>
Fix missing PPI to timer start compensation and missing
inclusion of range delay in the calculation of packet
header receive timeout value.
Signed-off-by: Vinayak Kariappa Chettimada <vich@nordicsemi.no>
Fix Extended Advertising Parameter check to exclude legacy
high duty cycle directed advertising from validating the
intervals as advertising interval parameter values are not
applicable for high duty cycle directed advertising.
Signed-off-by: Vinayak Kariappa Chettimada <vich@nordicsemi.no>
This makes .config, autoconf.h, and configs.c deterministic again.
Directory listing is not deterministic, it must always be sorted.
https://reproducible-builds.org/docs/stable-inputs/
Fixes commit 61bbfb5ba25f ("scripts: introduce list_hardware.py for
listing of architectures and SoCs") in collab-hwm branch which was
squashed in mega HWMv2 commit 8dc3f85622 ("hwmv2: Introduce Hardware
model version 2 and convert devices")
SOF CI builds with both Windows and Linux and compares the outputs. This
catches practically 100% of build reproducibility issues and caught this
one too:
https://github.com/thesofproject/sof/actions/runs/8241692987/job/22539664560
HWMv2 was a "big bang" integration on both the Zephyr and SOF sides. So
this `rglob()` was a needle in a haystack but with hindsight, this issue
is really trivial to reproduce and verify:
```
apt-get install disorderfs
mkdir disorderedWorkspace/
disorderfs --shuffle-dirents=yes workspace/ disorderedWorkspace/
```
... then just build `samples/hello_world/` twice in disorderedWorkspace/
with any --board and compare the build directories.
Signed-off-by: Marc Herbert <marc.herbert@intel.com>
If no callbacks have been registered then callback_list
is NULL, in which case we can skip searching.
This also fixes a NULL-pointer acces in the while loop
as previous_callback would be NULL when it gets
dereferenced as previous_callback->_next.
Signed-off-by: Emil Gydesen <emil.gydesen@nordicsemi.no>
