Adds a new config HAS_MCUX_ENET to constrain which socs can enable the
mcux ethernet driver. This will prevent users from enabling the driver
on socs like kl25z or kw41z which do not have ethernet mac hardware.
Signed-off-by: Maureen Helm <maureen.helm@nxp.com>
This library, written by STMicroelectronics, is used to convert an
audio stream from PDM format to PCM format through a signal filtering
and decimation.
Library is located in ext/hal/st/lib/audio.
Origin: ST Microelectronics
License: Apache 2.0
URL: https://os.mbed.com/
Commit: 25:f2c04f757003
Purpose: reconstruct the audio signal produced by ST MEMS microphone
Maintained-by: External
Signed-off-by: Armando Visconti <armando.visconti@st.com>
Adding a binding .yaml file for Nordic FICR and the
corresponding macro definition for NRF_FICR in
nrfx_config_nrf9160.h header file.
Signed-off-by: Ioannis Glaropoulos <Ioannis.Glaropoulos@nordicsemi.no>
This commit contributes a binding .yaml file for Nordic nRF
SPU peripheral and defines the macro for the peripheral base
register address in file ext/hal/nordic/nrfx_config_nrf9160.h.
Signed-off-by: Ioannis Glaropoulos <Ioannis.Glaropoulos@nordicsemi.no>
Change fixes problem with mutexes and initialization for SystemView,
adds config options to:
- choose if SystemView should start logging events on system start
- select SystemView RTT buffer size
Signed-off-by: Marek Pieta <Marek.Pieta@nordicsemi.no>
The OpenISA RV32M1 SoC has four CPU cores. Two of these are RISC-V
32-bit cores, which are named "RI5CY" and "ZERO-RISCY". (The other two
cores are ARM Cortex-M0+ and -M4.) This patch adds basic SoC
enablement for the RISC-V cores:
- basic dtsi, to be extended as additional drivers are added
- SoC definition in soc/riscv32/openisa_rv32m1 for RI5CY / ZERO-RISCY
- system timer driver for RI5CY, based on LPTMR0 peripheral
The timer driver will be generalized a bit soon once proper
multi-level interrupt support is available.
Emphasis is on supporting the RI5CY core as the more capable of the
two; the ZERO-RISCY SoC definitions are a good starting point, but
additional work setting up a dtsi and initial drivers is needed to
support that core.
Signed-off-by: Marti Bolivar <marti@foundries.io>
Signed-off-by: Michael Scott <mike@foundries.io>
This provides a HAL for the OpenISA RV32M1 SoC.
Origin: open-isa-rv32m1 GitHub organization
URL: https://github.com/open-isa-rv32m1/rv32m1_sdk_riscv
Revision: 365b1060f0947d5250c07b3eebdbc9e54cd0246e
Maintained-by: External
License: BSD-3-Clause
Signed-off-by: Marti Bolivar <marti@foundries.io>
Revert 71ba2de7:
ext: stm32cube: stm32f4xx: shift I2SR field in PLLI2SCFGR register
(ST Bug tracker ID: 50086)
Revert 9a893202:
ext: stm32cube: stm32f7xx: shift I2SR field in PLLI2SCFGR register
(ST Bug tracker ID: 50108)
This two commits were introduced to shift the PLLR parameter according
to the PLL register field position. After analysis, it appears that
function is actually correct, and issue was actually in parameters
provided that didn't match the API. (see PR #12609)
Signed-off-by: Armando Visconti <armando.visconti@st.com>
Extend generic mbedTLS configuration file with MBEDTLS_HAVE_ASM option,
to allow the use of assembly code. This improves the performances of
asymetric cryptography, however depending on the architecture and the
CPU, this might have an impact on the code size.
Set the default value ot the previous non-configurable value, ie enable
it by default except on ARM.
Signed-off-by: Aurelien Jarno <aurelien@aurel32.net>
We have dependency on this module in code which is part of Zephyr. When
this module is split out of the tree we need to be able to build. Move
this Kconfig part to be part of zephyr and keep the external code in
ext/ with plan to split it out on the future.
Signed-off-by: Anas Nashif <anas.nashif@intel.com>
Extend generic mbedTLS configuration file with MBEDTLS_AES_ROM_TABLES
option. This allows to save some RAM (~8kB) in favour of ROM and
performance.
Signed-off-by: Robert Lubos <robert.lubos@nordicsemi.no>
Add the header file with the nrfx drivers configuration suitable for
the nRF9160 SoC. This file contains also definitions of CMSIS symbols
(like NRF_CLOCK or NRF_SPIM0) for structures of peripheral registers.
These symbols are used in nrfx HALs and drivers, and for other nRF SoCs
they come from MDK files. For nRF9160 they need to be mapped to proper
addresses in Secure or Non-Secure domain, so we use the information
coming from DT to get it done automatically.
Signed-off-by: Andrzej Głąbek <andrzej.glabek@nordicsemi.no>
There is an effort underway to make most of the Zephyr build script's
reentrant. Meaning, the build scripts can be executed multiple times
during the same CMake invocation.
Reentrancy enables several use-cases, the motivating one is the
ability to build several Zephyr executables, or images, for instance a
bootloader and an application.
For build scripts to be reentrant they cannot be directly referencing
global variables, like target names, but must instead reference
variables, which can vary from entry to entry.
Therefore, in this patch, we replace global targets with variables.
Signed-off-by: Sebastian Bøe <sebastian.boe@nordicsemi.no>
Use built-in by default. We do not use external library of QMSI anymore
and rely on integrated HAL. Remove this option and simplify HAL
configuration.
Signed-off-by: Anas Nashif <anas.nashif@intel.com>
Adds a shim layer around the mcux lpi2c driver to adapt it to the zephyr
i2c interface. This shim driver leverages heavily from the mcux i2c shim
driver because the MCUXpresso SDK provides similar APIs for the i2c and
lpi2c peripherals.
Signed-off-by: Maureen Helm <maureen.helm@nxp.com>
This commit introduces compile definitions for nrfx, and
lets the build compile in system_nrf9160.c, when building
for nrf9160 SoCs.
Signed-off-by: Ioannis Glaropoulos <Ioannis.Glaropoulos@nordicsemi.no>
Add support for the TRNG device contained in the i.MX RT SoCs. It uses
the existing MCUX driver, and mostly consists in adding the Kconfig and
DTS entries.
Signed-off-by: Aurelien Jarno <aurelien@aurel32.net>
Adds support for the device configuration data (DCD), which provides a
sequence of commands to the imx rt boot ROM to initialize components
such as an SDRAM.
It is now possible to use the external SDRAM instead of the internal
DTCM on the mimxrt1020_evk, mimxrt1050_evk, and mimxrt1060_evk. Note,
however, that the default board configurations still link data into
internal DTCM, therefore you must use a device tree overlay to override
"zephyr,sram = &sdram0"
Signed-off-by: Maureen Helm <maureen.helm@nxp.com>
Adds support for the boot data, image vector table, and FlexSPI NOR
config structures used by the imx rt boot ROM to boot an application
from an external xip flash device.
It is now possible to build and flash a bootable zephyr image to the
external xip flash on the mimxrt1020_evk, mimxrt1050_evk, and
mimxrt1060_evk boards via the 'ninja flash' build target and jlink
runner. Note, however, that the default board configurations still link
code into internal ITCM, therefore you must set CONFIG_CODE_HYPERFLASH=y
or CONFIG_CODE_QSPI=y explicitly to override the default. You must also
set CONFIG_NXP_IMX_RT_BOOT_HEADER=y to build the boot header into the
image.
Signed-off-by: Maureen Helm <maureen.helm@nxp.com>
Zephyr gecko drivers depend on libraries provided by the vendor. The
same libraries may also be used directly by the application code or
RAIL library. To facilitate the latter use case scenario this commit
adds Kconfig options to independently enable compilation of vendor
HAL library modules.
Signed-off-by: Piotr Mienkowski <piotr.mienkowski@gmail.com>
Updates the MCUXpresso SDK to version 2.5.0 for applicable SoCs.
Wireless (KW*) and legacy (KL25) SoCs were not included in this
MCUXpresso SDK release and are therefore not updated here.
New in this release is SoC-level and board-level support for external
xip flash in the i.MX RT family.
For RT1050, we are now using the MCUXpresso SDK for the EVKB version of
the board, which correponds to an upgrade from A0 to A1 silicon.
However, we don't yet have Kconfigs in place to support A1 silicon part
numbers, and therefore add a simple cmake hack to convert A0 part
numbers to A1 part numbers.
The SDK flash driver interface also changed slightly in this release,
and thus the zephyr flash shim driver is updated accordingly.
Origin: MCUXpresso SDK
License: BSD 3-Clause
URL: mcux.nxp.com
Purpose: Provide device header files and bare metal peripheral drivers
for Kinetis, LPC, and i.MX SoCs.
Maintained-by: External
Signed-off-by: Maureen Helm <maureen.helm@nxp.com>
Devices with external xip flash like the rt1050 and rt1060 have
additional support files in the MCUXpresso SDK. Enhance the mcux import
script to pick up these files.
Signed-off-by: Maureen Helm <maureen.helm@nxp.com>
Updates the mcux import script to place fsl_iomuxc.* files into the
device-specific folder rather than the shared driver folder.
Signed-off-by: Maureen Helm <maureen.helm@nxp.com>
This file was moved into a device-specific folder in commit
282d95f655 but inadvertantly added back to
the imx driver folder in commit
a4633da9f5.
Signed-off-by: Maureen Helm <maureen.helm@nxp.com>
Kconfig options are often either of the type 'feature' or
'configuration'. Meaning, either an option controls whether a feature
is enabled, or it adjusts/configures an already enabled feature.
Configuration of features should depend on the feature they are
configuring or else noise is created both in the Kconfig output and in
the Kconfig menu.
In this commit we add a dependency from a configuration option to it's
feature option.
Signed-off-by: Sebastian Bøe <sebastian.boe@nordicsemi.no>
Since 2.14.1 release mbedTLS has a few API changes and deprecation which
do not affect the Zephyr code and a new MBEDTLS_CHECK_PARAMS option that
enables validation of parameters in the API. A list with all changes can
be found in:
./ext/lib/crypto/mbedtls/ChangeLog
Note that this version will become the basis of the next LTS (Long Term
Support) branch that will be maintained for the next 3 years until at
least the end of 2021.
Signed-off-by: Aurelien Jarno <aurelien@aurel32.net>
Since 2.12.0 release mbedTLS has an important security fix concerning
RSA PKCS#1 v1.5 decryption (CVE-2018-19608). Besides that it has very
few API changes, and the usual set of functional improvements, security
fixes and bug fixes. A list with all changes can be found in:
./ext/lib/crypto/mbedtls/ChangeLog
It should also be noted that the small change concerning _POSIX_C_SOURCE
applied to x509.c has been moved to platform_util.c, this time with a
proper define guard.
Signed-off-by: Aurelien Jarno <aurelien@aurel32.net>
Currently there is a mixed approach in prefixes from mbedTLS
configuration (MBEDTLS_ and TLS_). The latter was used in generic config
file and could bring up confusion that it can only be used with TLS
subsystem. Hence unify the approach to MBEDTLS_ prefix to avoid such
confusion.
Signed-off-by: Robert Lubos <robert.lubos@nordicsemi.no>
Extend generic mbedTLS config file with additional algorithms. Add
separate RNG section. Add switches to enable all algorithms in specific
group.
Signed-off-by: Robert Lubos <robert.lubos@nordicsemi.no>
This is a temporary fix in one of the MDK files that is a part of nrfx
and it is expected to be replaced with the final solution in the next
update of nrfx.
Signed-off-by: Simen Tinderholt <Simen.Tinderholt@nordicsemi.no>
Signed-off-by: Andrzej Głąbek <andrzej.glabek@nordicsemi.no>
Fix issue caused by 3fc497ac9a
This change removes `rtt` and `systemview` from header includes
as these are already placed in the path.
Also `SEGGER_SYSVIEW_ConfDefaults.h` header included from
`SEGGER_SYSVIEW_Int.h` is placed higher to make sure `INLINE`
definition is properly visible.
Signed-off-by: Pawel Dunaj <pawel.dunaj@nordicsemi.no>
By using system include directive, we allow
the user to place external SEGGER_RTT_conf.h files to the
include path in order to override the zephyr version.
Signed-off-by: Håkon Øye Amundsen <haakon.amundsen@nordicsemi.no>
This is a follow-up to commit b45fcc6b9e.
The nrfx import is complemented with the file containing
a core-dependent delay function. The intention is to allow it
to be used in a custom k_busy_wait() implementation.
Origin: nrfx
License: BSD 3-Clause
URL: https://github.com/NordicSemiconductor/nrfx/tree/v1.3.1
commit: d4ebe15f58de1442e3eed93b40d13930e7785903
Purpose: Provide peripheral drivers for Nordic SoCs
Maintained-by: External
Signed-off-by: Andrzej Głąbek <andrzej.glabek@nordicsemi.no>
For the EFM32PG12B, the define _EMU_EM23PERNORETAINCTRL_VDAC0DIS_MASK
is not availabe. This commit guards its usage with ifdefs.
This might be a bug in the gecko SDK or some version incompatibility
in the used files.
Signed-off-by: Christian Taedcke <hacking@taedcke.com>
This includes the Gecko HAL files for the EFM32PG12B SoCs
Origin: Silicon Labs Gecko SDK
URL: https://github.com/SiliconLabs/Gecko_SDK
Version: v5.1.2 (SHA: 938464c68e6c3b2237388a692f767bb0767ec010)
Purpose: Add support for Silicon Labs EXX32 SoCs
License: Zlib
Maintained-by: External
Signed-off-by: Gil Benkö <gil.benkoe@pm.me>
