This adds the cmsis-nn module since it moved to its own realm.
This also adds a kconfig for the long short-term memory.
Signed-off-by: Ryan McClelland <ryanmcclelland@meta.com>
Use CMSIS-DSP from its new realm. This also changes change how you
initialize FFT tables as well to use arm_cfft_init_64_f32 if you
know the FFT size in advance rather than the generic initialization
arm_cfft_init_f32.
Signed-off-by: Ryan McClelland <ryanmcclelland@meta.com>
Update Zephyr fork of MCUboot to revision:
736234caa5ee0b3090cf02e5af0c2dc798aa4beb
Brings following Zephyr relevant fixes:
- c7aa2c0 boot_serial: Fix issues with single slot mode/encrypted
images
- 6ba46c0 boot_serial: Fix issue with queued commands
- 274547c bootutil: PSA Crypto ECDSA enablement
- 8f8fbf9 zephyr: Fall back to minimal C library
- 5c5222f boot_serial: Fix include
- b847a33 espressif: use minimal libc as default for ESP32 boards
- 480b97f boot_serial: Fix missing point if using snprintf
- 3790f5f boot: zephyr: use indication LED also in timeout based
recovery
- 0035c33 zephyr: Provide third image cases for direct image
upload
Signed-off-by: Jamie McCrae <jamie.mccrae@nordicsemi.no>
Synchronizes with the new upstream RX/TX timestamp definition in
OpenThread based on the standard's SFD.
This change is synchronized with the upstream OpenThread implementation
via west.yml.
Signed-off-by: Florian Grandel <fgrandel@code-for-humans.de>
This commit:
* adds the `CONFIG_SOC_GECKO_SERIES0` Kconfig option for Gecko Series 0
SoCs
* selects the proper `CONFIG_SOC_GECKO_SERIESx` option where it's currently
missing
Fixes#62806.
Signed-off-by: Filip Kokosinski <fkokosinski@antmicro.com>
New nrfx revision fixes issue in the PWM driver causing build
errors due to invalid include when workaround for anomaly 109
is enabled.
Signed-off-by: Nikodem Kastelik <nikodem.kastelik@nordicsemi.no>
Add a MBOX driver wrapper around the NXP MU, simular to
the existing wrapper around the NXP S32 MRU. This allows Zephyr IPC
to work based on the MU, on a number of NXP boards.
Also update the SHA of NXP HAL to enable the Kconfig for this driver.
Signed-off-by: Yicheng Li <yichengli@google.com>
The percepio module change removes unused kernel ports from the
zephyr version of the percepio module.
Signed-off-by: Aron Lander <aron.lander@percepio.com>
This commit adds the DFM (DevAlert target side code) module and
moves the TraceRecorder module into the percepio module, which
results in the TraceRecorder module definition being removed
from the west manufest and module definition within zephyr.
Signed-off-by: Aron Lander <aron.lander@percepio.com>
Make HCI driver compatible to the updated versions of the
EFR32 Bluetooth library BLOBs consisting of:
* libbluetooth_controller
* libbgcommon
* librail
Signed-off-by: Markus Fuchs <markus.fuchs@ch.sauter-bc.com>
Updates the TI hal modules to include the following fixes in Zephyr's
ClockP API implementation:
* The unused stubs.h header was removed.
* The ClockP implementation contained some cruft due to an incomplete
migration from the ms based to the tick based kernel timer API.
* The ClockP implementation assumed timeouts and periods to be given in
ms although TI's API always expected ticks.
* A fix for a major conversion bug in TI's own usage of the ClockP API
throughout the SimpleLink framework is included.
Signed-off-by: Florian Grandel <fgrandel@code-for-humans.de>
update west to fetch acpica PR 882 for running CI job. This is a temp
commit to verify CI job and will update with latest commit once acpica
PR get merged into mainline.
Signed-off-by: Najumon B.A <najumon.ba@intel.com>
In this board, there are eight PWM channels from
EMIOS 0 CH0 --> EMIOS 0 CH7 that can be used to
generate PWM pulse to outside of the board.
Moreover, there are three RGB leds that can use
PWM pins for blinking, faded leds
Signed-off-by: Dat Nguyen Duy <dat.nguyenduy@nxp.com>
Update TF-M version with fix for build with shared boot data enabled,
i.e. CONFIG_TFM_MCUBOOT_DATA_SHARING=y.
Regression from: 485fa940aa
Signed-off-by: Joakim Andersson <joakim.andersson@nordicsemi.no>
* In Zephyr: The HW models now include N interrupt controllers
The interrupt handling code needs to target one controller
specifically.
* Update the HW models module to
57b61a9a2da75c860f15ca79522b24d57992df2c
Including the following:
* 57b61a9 INT CNTRL: Generalize to N controllers
* 1ea8194 nrf_bsim_redef.h: Add first definitions for nrf5340
* 5f81ee9 irq_ctrl: Lower a bit HW event priority
* 0986acc RNG: Add nrf53 variant in model
* 09345da RNG: Generate level interrupts instead of pulse ones
* f9b7c7a DPPI: Add first version
* 62dabd3 HW models: Initial peripheral adaptation for multi-int_cntr
* f54b59d HW models: Adding initial nrf5340 structure
* fb1edd9 HW models: Use HW types definitions only where neded
* 2744f4c Add basic support for variants
* a5f79cd nrf_bsim_redef.h: Remove unnecessary redefinitions
* 2c781dd HW_models: Improve includes
* bdb0a08 minor: Remove non-ASCII characters from source
* b5e95bd RADIO: Corrected note about MAXLEN and CRCINC behaviour
Signed-off-by: Alberto Escolar Piedras <alberto.escolar.piedras@nordicsemi.no>
Update SNVS pin names in RT11xx DTSI files to align with new pin data
generated for the RT1176 and RT1166 processors. This pin data is stored
within the NXP HAL, so the SHA of the HAL is also updated by this
commit.
Signed-off-by: Daniel DeGrasse <daniel.degrasse@nxp.com>
- fix i2c hang issue
- switch hpet/i2c/uart/gpio to use osxml generated header files for
IP registers
- spi dma support
Signed-off-by: Dong Wang <dong.d.wang@intel.com>
Update Zephyr fork of MCUboot to revision:
11ecbf639d826c084973beed709a63d51d9b684e
Brings following Zephyr relevant changes and fixes:
- 11ecbf63 zephyr: use cmsis_core.h header
- da65db00 zephyr: Provide slot definitions for three images
- 2c61caf6 bootutil: Move flash_area_id_to_image under ifdef
- 904d0c46 bootutil: Add DirectXIP version of boot_set_next
- 2a874b6e zephyr: Do not build in debug mode
- 258a6c7d bootutil: Fix support for more than 2 flash areas
Signed-off-by: Dominik Ermel <dominik.ermel@nordicsemi.no>
The Xtensa HAL has been updated with the following changes:
* Removed intel_s1000 overlay files as it is no longer needed.
* Fix uninitialized variable warning in xthal_v2p()
* Add config and overlay files for dc233c core so we can use
QEMU with this core to test MMU code.
Signed-off-by: Daniel Leung <daniel.leung@intel.com>
Convert the nrf52_bsim board, to use the native simulator
as its engine.
This means some of the functionality the board included
before is now handled by the native simulator, including
the overall program main and CPU/HW scheduling.
Note that this board remains separate from the native_sim
board, even if both use the native simulator.
Also update the nRF HW models component to a new version
which has been converted into an extension for the
native simulator.
After this change, it becames also possible to build
the nrf52_bsim with an embedded C library, and to
use with it the Zephyr POSIX API shim.
Signed-off-by: Alberto Escolar Piedras <alberto.escolar.piedras@nordicsemi.no>
The CMSIS module glue code was part of arch/ directory. Move it to
modules/cmsis, and provide a single entry point for it: cmsis_core.h.
This entry header will include the right CMSIS header (M or A/R).
To make this change possible, CMSIS module Kconfig/CMake are declared as
external, allowing us to add a new Zephyr include directory.
All files including CMSIS have been updated.
Signed-off-by: Gerard Marull-Paretas <gerard.marull@nordicsemi.no>
The nRF HW models have been updated to include the following
fixes and improvements:
* RADIO: Handle MAXLEN and other related improvements
* PPI: Added 2 notes about status and shortcommings
Signed-off-by: Alberto Escolar Piedras <alberto.escolar.piedras@nordicsemi.no>
Align all sensor drivers that are using stmemsc (STdC) HAL i/f
to new APIs of stmemsc v2.3
Requires https://github.com/zephyrproject-rtos/hal_st/pull/16
Signed-off-by: Armando Visconti <armando.visconti@st.com>
The existing heap starts at the beginning of SPIRAM which is also occupied
by the WiFi stack if CONFIG_ESP32_WIFI_NET_ALLOC_SPIRAM is enabled. This
results in memory corruption.
Update the linker description to add a _spiram_heap_start symbol and add a
KConfig size option to allow the SPIRAM stack to be correctly located and
sized. Requires matching commit in hal_espressif.
Fixes: 61359
Signed-off-by: Eric Holmberg <eric.holmberg@northriversystems.co.nz>
This enables the power management for Intel ISH. It supports D0i1,
D0i2, D0i3 power saving modes for ISH.
Signed-off-by: Leifu Zhao <leifu.zhao@intel.com>
The change is to update the location of the NXP HAL license file (BSD-3)
to the root of the NXP HAL repo.
Signed-off-by: Yves Vandervennet <yves.vandervennet@nxp.com>
Implement the sys_poweroff hook for all ESP32 SoCs based on the previous
SOFT_OFF implementation.
Signed-off-by: Gerard Marull-Paretas <gerard@teslabs.com>
The nRF HW models have been updated to include the following
fixes and improvements:
* TIMER: Fix bogus events/interrupts if shorts where used
* PPI: Handle well an event triggering a task twice
Signed-off-by: Alberto Escolar Piedras <alberto.escolar.piedras@nordicsemi.no>
Update trusted-firmware-m to 1.8.0, mbedtls to 3.4.0, and tf-m-tests to
1.8.0. Includes minor cmake changes due to file renames and such, as well
as adjusting the return type of a callback function that has changed since
the previous version of trusted-firmware-m.
Signed-off-by: David Brown <david.brown@linaro.org>
SiLabs' sleeptimer driver supports several hardware peripherals, of
which the counter driver so far only supports the RTCC-based variant.
This patch adds support for the SYSRTC-based sleeptimer implementation,
which is required for Gecko SoCs that do not have an RTCC module.
Signed-off-by: Markus Fuchs <markus.fuchs@ch.sauter-bc.com>
The Zephyr-specific Segger SystemView configuration was not used as
the same file was available inside the external Segger module with
higher import priority.
Fixes the regression by moving the SystemView configuration to the same
place in the external module where RTT configuration already resides and
thereby creates a canonical include path to avoid further regressions of
the same kind.
Fixes: #61133
Signed-off-by: Florian Grandel <fgrandel@code-for-humans.de>
This version introduces support for the syscalls extension,
which greatly reduces the amount of bandwidth being used
for tracing syscalls.
Signed-off-by: Aron Lander <aron.lander@percepio.se>
Add initial support for NXP S32 GMAC/EMAC:
- it's a copy-implementation with DMA data buffers and buffer
descriptors in non-cached memory (buf len and ring size configurable)
- PHY interface selection only implemented for S32K3 devices as it is
SoC-specific
- no PHY driver integration, it works as a fixed link with speed/duplex
configured through devicetree
- supports multicast hash filtering, promiscuous mode, MAC loopback
Signed-off-by: Manuel Argüelles <manuel.arguelles@nxp.com>
The nRF HW models have been updated to include the following
fixes and improvements:
* TIMER: Add missing HAL function override
* TIMER: Added notes about minor differences
Signed-off-by: Alberto Escolar Piedras <alberto.escolar.piedras@nordicsemi.no>
The nRF HW models have been updated to include the following
fixes and improvements:
* RADIO: Bugfix if DISABLE or STOP during first us of TxStart
* File opening: Create folders if missing
* TIMER: Completed, including all count functionality
Signed-off-by: Alberto Escolar Piedras <alberto.escolar.piedras@nordicsemi.no>
Update uoscore-uedhoc repository to the latest revision.
Align uoscore tests with the API changes.
Signed-off-by: Robert Lubos <robert.lubos@nordicsemi.no>
This adds basic support for 'B' revision of the Silicon Labs EFR32BG
BRD4184 (Thunderboard BG22) board. Due to missing drivers, some of the
on-board peripherals are currently unsupported:
- Silicon Labs Si7021 relative humidity and temperature sensor
- Vishay VEML6035 ambient light sensor
- Knowles SPK0641HT4H-1 MEMS microphones
- TDK InvenSense ICM-20648 6-axis inertial sensor
Signed-off-by: Piotr Dymacz <pepe2k@gmail.com>
Enable all channels that available connector on board.
ADC0 channel 6 on precision group with normal end chain
callback.
ADC1 channel 2 on precision group with normal end of
conversion callback.
ADC2 channels 3, 4, 5 on precision group with normal end
of conversion callback.
Signed-off-by: Cong Nguyen Huu <cong.nguyenhuu@nxp.com>
Reuse existing MCUX-based shim driver for FlexCAN.
Enable flexcan0 for Zephyr canbus to run tests.
Signed-off-by: Cong Nguyen Huu <cong.nguyenhuu@nxp.com>
When `nrfx_pwm_stopped_check()` was called multiple times it was
returning incorrect value after second and next calls.
Signed-off-by: Adam Wojasinski <adam.wojasinski@nordicsemi.no>
The nRF HW models have been updated to include the following
fixes and improvements.
* RADIO: Improve T_IFS support, and fix for low latency mode
* docs: Miscelaneous improvements
Signed-off-by: Alberto Escolar Piedras <alberto.escolar.piedras@nordicsemi.no>
The NXP S32 QSPI controller acts as an interface to up to two serial
flash memory devices, each with up to eight bidirectional data lines,
depending on the platform. It is based on a LUT enginee to interface
through commands with different memory types including flash NOR and
Hyperram.
This patch adds support for the QSPI in S32K344 which supports a single
memory device (side A) with up to four bidirectional data lines and SDR
only. Nevertheless, the memory controller is implemented flexible enough
to be extended to support more feature-rich QSPI blocks.
Signed-off-by: Manuel Argüelles <manuel.arguelles@nxp.com>
Refactor the ESP32 target SOCs together with
all related boards. Most braking changes includes:
- changing the CONFIG_SOC_ESP32* to refer to
the actual soc line (esp32,esp32s2,esp32s3,esp32c3)
- replacing CONFIG_SOC with the CONFIG_SOC_SERIES
- creating CONFIG_SOC_FAMILY_ESP32 to embrace all
the ESP32 across all used architectures
- introducing CONFIG_SOC_PART_NUMBER_* to
provide a SOC model config
- introducing the 'common' folder to hide all
commonly used configs and files.
- updating west.yml to reflect previous changes in hal
Signed-off-by: Marek Matej <marek.matej@espressif.com>
Updates the west manifest to add an LVGL shell with initial memory
statistics and monkey testing support.
Signed-off-by: Fabian Blatz <fabianblatz@gmail.com>
Update trusted-firmware-m to 1.8.0, mbedtls to 3.4.0, and tf-m-tests to
1.8.0. Includes minor cmake changes due to file renames and such, as well
as adjusting the return type of a callback function that has changed since
the previous version of trusted-firmware-m.
Signed-off-by: David Brown <david.brown@linaro.org>
Add Nuvoton numaker series flash memory controller(FMC) with erase,
read & write features of soc-flash. Also update Nuvoton manifest
to include zephyrproject-rtos/hal_nuvoton#6.
Signed-off-by: cyliang tw <cyliang@nuvoton.com>
Update STM32Cube packages:
update stm32c0 to cube version V1.1.0
update stm32f2 to cube version V1.9.4
update stm32h5 to cube version V1.1.0
update stm32l1 to cube version V1.10.4
update stm32u5 to cube version V1.3.0
update stm32wb to cube version V1.17.0
update stm32wba to cube version V1.1.0
Signed-off-by: Erwan Gouriou <erwan.gouriou@st.com>
Update Zephyr fork of MCUboot to revision:
6a8746d7acd75ff81fb6888d7776f412663f7897
Brings following Zephyr relevant fixes:
- 6a8746d boot_serial: fix image number handle in image upload
request
- f2cb550 boot_serial: fix misuse of 'matched' param from
zcbor_map_decode_bulk()
- 82feb9a boot_serial: Fix showing images that are not valid
- 61962b9 bootutil: fix FIH int conversion for security_cnt
- e6e4801 zephyr/boot_serial_extension: Fix zcbor header path
- a5db515 bootutil/crypto: SHA256 abort function return state
- 0361ad3 bootutil/crypto: SHA256 init functions should return a
status
- f92a219 bootutil/crypto: Fix minor typos in comments for RSA
modules
- 4854700 bootutil: Add image_index to additional logging messages
- 2f85b7e bootutil/crypto: Fix the common.h header
- c321a70 bootutil/crypto: Add a crypto backend for SHA256 based
on PSA Crypto APIs
- 02bf072 bootutil/crypto: Refactor the RSA signature verification
and encryption
- ba5fb1c bootutil: Add image_index to common prints
Signed-off-by: Jamie McCrae <jamie.mccrae@nordicsemi.no>
The nRF HW models have been updated to include the following
fixes and improvements.
* GPIO & GPIOTE: Add HW models, including PPI connections and HAL glue.
* NRF_NVMC: Avoid segfault on double call of cleanup
* BLECrypt_if: Avoid segfault on double call of cleanup
Signed-off-by: Alberto Escolar Piedras <alberto.escolar.piedras@nordicsemi.no>
The S32K3 MCUs are 32-bit Arm Cortex-M7-based microcontrollers with a
focus on automotive and industrial applications. The S32K344 features
a lock-step core, internal flash, RAM and TCM with ECC.
Co-authored-by: Dat Nguyen Duy <dat.nguyenduy@nxp.com>
Co-authored-by: Cong Nguyen Huu <cong.nguyenhuu@nxp.com>
Signed-off-by: Manuel Argüelles <manuel.arguelles@nxp.com>
Update the bsim top manifest repo and all its subrepos
to bsim release 2.2.1.
Signed-off-by: Alberto Escolar Piedras <alberto.escolar.piedras@nordicsemi.no>
The nRF HW models have been updated to include the following
fixes and improvements.
* PPI: add support for nrf_ppi_group_enable
* BLECrypt: Widen search for crypto library
* Makefile: Switch to gnu11 from c11 due to HAL
* NVMC: Minor fixes in command line options descriptions
Which enable more 15.4 functionality with the nrf driver
Signed-off-by: Alberto Escolar Piedras <alberto.escolar.piedras@nordicsemi.no>
This allows the MIPI Sys-T library to be built with minimal C
library. This is due to lack of support for wchar in our
minimal C library. This simply tells the library to skip any
wchar support.
Signed-off-by: Daniel Leung <daniel.leung@intel.com>
Due to a limitation in the west import feature,
a project cannot both have an import and be part of a group.
Moreover, when a project has an import and is not filtered
out, it is required for that project to be present
for most west commands to work.
As the bsim project is not filtered by default,
it causes trouble for users who never run a
west update but try to use west further.
To work around this issue, let's disable the import
in the bsim project, and instead replicate its content
inside Zephyr's main manifest.
Having a replica of the babblesim manifest content
is likely to cause some confusion in users,
wrt to which version of components they are using.
So whenever west supports both imports and groups, or another
simple and nicer way of working around this, it should be used.
Signed-off-by: Alberto Escolar Piedras <alberto.escolar.piedras@nordicsemi.no>
Update LVGL revision with performance tuning options, including the
following:
- Enable forcing LVGL to perform a full display refresh on every update
- Enable custom alignment and linker section location of LVGL
framebuffers.
Signed-off-by: Daniel DeGrasse <daniel.degrasse@nxp.com>
This commit enabled the Silicon Labs Bluetooth interface driver on the
EFR32BG27 SoC series in the Kconfig.
Signed-off-by: Filip Kokosinski <fkokosinski@antmicro.com>
This udpates the manifest SHA to use the latest Xtensa HAL
commit which is to support building intel_adsp_ace15_mtpm
using Zephyr SDK.
Signed-off-by: Daniel Leung <daniel.leung@intel.com>
Signed-off-by: Stephanos Ioannidis <root@stephanos.io>
This commit adds BLE support to the `efr32xg24_dk2601b` board. It also
modifies the SiLabs BT HCI driver to accomodate the EFR32xG24 SoC
series.
Signed-off-by: Filip Kokosinski <fkokosinski@antmicro.com>
This fixes an issue related to SPIRAM and DRAM_1 region
access. It is possible that the application crashes due to
invalid pointer value.
Signed-off-by: Sylvio Alves <sylvio.alves@espressif.com>
Update Zephyr fork of MCUboot to revision:
2878eb4e32fabc14bc391c3221cbf285064d9db4
Brings following Zephyr relevant fixes:
- ec2ac82c boot/zephyr: switch main return type to 'int'
- 67693442 boot: zephyr: esp32: zephyr port
- 0a1ef372 bootutil/crypto: Move BOOTUTIL_CRYPTO_ECDSA_P256_HASH_SIZE
into common
- 10529d30 bootutil/crypto: Have a single ECDSA verification module
- 966ac818 bootutil/crypto: Extend ECDSA to support P384 curve
- 25390ad5 bootutil/crypto: Have a single ECDSA abstraction file
- cf36d670 bootutil/crypto: Add license disclaimer to ecdsa_p256.h
- 557451d2 bootutil/crypto: Add a generic signature validation module
for ECDSA
- c725cee1 docs: Add release note snippet for ECDSA TLV
- 30978516 sim: Remove curve specific ECDSA TLVs
- 6205c10f sim: Add generic ECDSA TLV support
- 5704174c imgtool: Add generic ECDSA TLV support
- b08e77e0 bootutil: Create new generic ECDSA TLV
Signed-off-by: Dominik Ermel <dominik.ermel@nordicsemi.no>
Update to the latest NRF HW models which include
models of the NVMC and UICR peripherals,
as well as some other (very) minor fixes.
Signed-off-by: Alberto Escolar Piedras <alberto.escolar.piedras@nordicsemi.no>
KSGEN and CRYPT tasks and corresponding events weren't compiled
for boards with nRF51 SoCs due to change in HAL.
Signed-off-by: Adam Wojasinski <adam.wojasinski@nordicsemi.no>
This commit adds the Gecko IADC driver and support for it to the
efr32bg_sltb010a board.
Signed-off-by: Mateusz Sierszulski <msierszulski@antmicro.com>
Signed-off-by: Roman Dobrodii <rdobrodii@antmicro.com>
This commit adds the SiLabs Bluetooth HCI driver. It also enables this
BLE HCI driver on the efr32bg_sltb010a board.
Signed-off-by: Filip Kokosinski <fkokosinski@antmicro.com>
To facilitate users experience, fetch the required
BabbleSim components using the west manifest.
Until now, users would need to either use the Zephyr
docker image, or fetch bsim on their own.
For many years there has been a request to automate this
process. This is the first step.
Signed-off-by: Alberto Escolar Piedras <alberto.escolar.piedras@nordicsemi.no>
HAL API changes in ethernet and pwm
SoC RT595 power management code change
west.yml update
Signed-off-by: Yves Vandervennet <yves.vandervennet@nxp.com>
With -ffreestanding disabled, Zephyr SDK 0.15.0 generates a potentially
uninitialized variable warning that appears to be a false positive. Pull
in the upstream version of the module which contains the fix.
Signed-off-by: Keith Packard <keithp@keithp.com>
Introduce PINT driver, for NXP pin interrupt and pattern match engine.
The driver currently supports only the pin interrupt feature of the
PINT.
Add DTS entires for the PINT on LPC and RT devices that support this
peripheral, and remove the interrupt defintions that are PINT specific
from the GPIO module on these devices.
Signed-off-by: Daniel DeGrasse <daniel.degrasse@nxp.com>
Among other things, this update brings:
* C++ improvements
* float16 support
* Improved docs
* -Wall and -Wconversion compliance
Signed-off-by: Øyvind Rønningstad <oyvind.ronningstad@nordicsemi.no>
