Disable the quadspi mpu region of the nucleo_f756zg (like done on
nucleo_f746zg) when testing the samples/userspace/shared_mem
or tests/kernel/mem_protect/userspace
The stm32f7 cortex M7 has 8 MPU regions and the one for quadspi prevents
the testcase to PASS.
Signed-off-by: Francois Ramu <francois.ramu@st.com>
A simple HTTP server sample application.
Signed-off-by: Emna Rekik <emna.rekik007@gmail.com>
Signed-off-by: Jukka Rissanen <jukka.rissanen@nordicsemi.no>
Signed-off-by: Robert Lubos <robert.lubos@nordicsemi.no>
Tests for HTTP server support.
Signed-off-by: Emna Rekik <emna.rekik007@gmail.com>
Signed-off-by: Jukka Rissanen <jukka.rissanen@nordicsemi.no>
Signed-off-by: Robert Lubos <robert.lubos@nordicsemi.no>
Original code developed as a GSoC 2023 project by Emna Rekik.
Code refactored in order to provide better bisectability
as the origical commits were not bisectable.
The server supports static and dynamic resources, managed by
HTTP_SERVICE/HTTP_RESOURCE macros.
Fixes#59685Fixes#59686Fixes#59688Fixes#59690Fixes#59670Fixes#59700Fixes#59684Fixes#59693Fixes#59693Fixes#59694Fixes#59699Fixes#59696Fixes#59688Fixes#59690Fixes#59670Fixes#59700Fixes#59685Fixes#59686Fixes#59688Fixes#59691
Signed-off-by: Emna Rekik <emna.rekik007@gmail.com>
Signed-off-by: Jukka Rissanen <jukka.rissanen@nordicsemi.no>
Signed-off-by: Robert Lubos <robert.lubos@nordicsemi.no>
Add HTTP/2 helper libraries to encode and decode HPACK encoded headers,
according to RFC7541.
HPACK string encoding requires to support certain set of Huffman codes,
therefore implement Huffman encoder/decoder as well.
Signed-off-by: Robert Lubos <robert.lubos@nordicsemi.no>
When building ISO applications on a device that has the host
and controller on the same core, the application developer
shouldn't have to set controller specific configurations.
Without this change the samples iso_receive and iso_broadcast
will fail to run on NRF52 series devices as the samples
try to set up two streams but the controller is configured
to support only one.
Controller unit tests that were previously only enabling the
controller specific ISO configurations now also enable the
top-level ISO configurations to ensure that the default
stream count is properly configured.
Signed-off-by: Rubin Gerritsen <rubin.gerritsen@nordicsemi.no>
In case of successful submission, the reference shouldn't be put down,
this only should done on error cases.
As reference is put down on success, during the buffer unref, no action
is taken due to an uint8 overflow (ref is now 255), so, the buf->frags
isn't cleared properly and the next time the frags is used and when L2
inserts a second frag, the first head frag and next frag are same (due
to buffer re-use) causing an infinite loop in either net_buf_frag_last
or net_pkt_get_len.
Signed-off-by: Chaitanya Tata <Chaitanya.Tata@nordicsemi.no>
The ip_k66f now supports its KSZ8794CNX switch IC via DSA subsystem.
With the samples/net/dsa it is possible to handle LLDP frames on this
board.
Signed-off-by: Lukasz Majewski <lukma@denx.de>
This commit adds support for these NXP Multi-core boards for
IPC static_vrings sample using OpenAmp lib:
- lpcxpresso55s69
- mimxrt1160_evk
- mimxrt1170_evk
- mimxrt1170_evkb
Signed-off-by: Tomas Galbicka <tomas.galbicka@nxp.com>
We can't enable device runtime power management in a device that is
set busy since it may suspend this device.
Signed-off-by: Flavio Ceolin <flavio.ceolin@intel.com>
Handle controller instances wanting to use different
API instances, need to change init flow so that they dont
interfere with each other, trick for now is returning
either the interrupt driven or async apis as not enabled
if the other has already been used on that controller.
Previously, there was an issue where enabling CONFIG_UART_ASYNC_API
would overwrite the init even if controller was meant to use
interrupt driven (as kconfig is global to affect all the controllers)
Signed-off-by: Declan Snyder <declan.snyder@nxp.com>
This reverts commit a80fa5163b.
That commit broke the polling API when used with the interrupt driven,
it is completely wrong to disable the receiver from irq_rx_disable,
the uart_basic_api test has been broken on all lpuart platforms because
of this bug.
Signed-off-by: Declan Snyder <declan.snyder@nxp.com>
This testsuite requires an external I2C RAM connected to the I2C bus.
Adding details to provide guidance to users interested in running the
suite.
Signed-off-by: Luis Ubieda <luisf@croxel.com>
Make bus_enable and bus_disable optional for drivers
to implement by checking if it is NULL in the api struct.
Signed-off-by: Declan Snyder <declan.snyder@nxp.com>
Adds checking that qualifiers listed in a soc.yml file are valid
for the socs and cpuclusters defined in that file
Signed-off-by: Jamie McCrae <jamie.mccrae@nordicsemi.no>
Adds configuration that allows nRF53 and nRF91-based boards to be
flashed through west using sysbuild for multiple images with the
recover or erase options and prevent running those commands for
each image being flash, which would make the device unbootable.
Also defers reset whilst all images for the cores of these SoCs
are flashed.
Signed-off-by: Jamie McCrae <jamie.mccrae@nordicsemi.no>
This adds supports for flashing images with sysbuild where there
are multiple images per board to prevent using the same command per
image flash which might cause issues if they are not ran just once
per flash per unique board name. A deferred reset feature is also
introduced that prevents a board (or multiple) from being reset if
multiple images are to be flashed until the final one has been
flashed which prevents issues with e.g. security bits being enabled
that then prevent flashing further images.
These options can be set at a board level (in board.yml) or a SoC
level (in soc.yml), if both are present then the board configuration
will be used instead of the SoC, and regex can be used for matching
of partial names which allows for matching specific SoCs or CPU cores
regardless of the board being used
Signed-off-by: Jamie McCrae <jamie.mccrae@nordicsemi.no>
esp32 platforms can overflow its dram0_0_seg and dram0_1_seg.
So update current dram section to meet both cases.
Signed-off-by: Sylvio Alves <sylvio.alves@espressif.com>
qemu_malta//be -> qemu_malta/qemu_malta/be
This caused the board not to work with Twister.
Signed-off-by: Øyvind Rønningstad <oyvind.ronningstad@nordicsemi.no>
Updates z_get_next_switch_handle() to set the new thread's base.cpu
value as it is done in do_swap(). This helps to ensure that the
last CPU on which the thread executed remains current.
Signed-off-by: Peter Mitsis <peter.mitsis@intel.com>
Removed following fields from relevant Handlers,
as they were unused in code:
* Handler's state
* Handler's generator
* BinaryHandler's call_west_flash
* QEMUHandler's results
* QEMUWinHandler's results
Signed-off-by: Lukasz Mrugala <lukaszx.mrugala@intel.com>
Found via static analysis. In fault path when checking for stack
overflows, if CONFIG_MULTITHREADING is not set, `guard_end` is left
uninitialized and is subsequently used in a comparison.
The solution is to simply return `false` in this configuration as stack
guards are not configured in the first place.
Signed-off-by: François Baldassari <francois@memfault.com>
This commit reverts a breaking change in CMAKE_SYSTEM_NAME introduced by
"Zephyr" back to "Generic") and removes the file
`cmake/modules/Platform/Zephyr`.
Both changes in the aforementioned PR were only introduced to ultimately
modify the value of the global CMake property TARGET_SUPPORTS_SHARED_LIBS
for the special case of building for Xtensa with LLEXT.
The modification of CMAKE_SYSTEM_NAME is considered a breaking change
because it has the potential to alter the build of any non-trivial project
that previously checked for the "Generic" system identifier as
corresponding to Zephyr - for example by doing
`if (CMAKE_SYSTEM_NAME STREQUAL "Generic")`. Such builds may now break in
many ways including silently when there is no `else()` clause with a
`message()` to alert the user that a whole configuration block had been
skipped.
In essence, that CMAKE_SYSTEM_NAME modification was only introduced in
order to have CMake to load `cmake/modules/Platform/Zephyr.cmake` which in
turn adjusted the value of TARGET_SUPPORTS_SHARED_LIBS.
But the use of a CMake platform file like this is ineffective for
non-trivial projects where one or more top level CMake `project()` calls
may happen before the first call to `find_package(Zephyr)` because in such
cases CMAKE_MODULE_PATH will not have been modified yet to contain the
path to <Zephyr_ROOT>/cmake/modules and thus no platform file will be
include by CMake.
This patch moves the conditional override of TARGET_SUPPORTS_SHARED_LIBS
needed by some archs (e.g. Xtensa) into the `kernel.cmake` module which
is known to be the first call to `project()` that enables any language and
thus the one that must come before any artifact target can be defined.
Note commit 64e7d85 added a Kconfig to specify the object type of llext
being built, so it's not tied to the arch anymore but to the
CONFIG_LLEXT_TYPE_ELF_SHAREDLIB option.
Signed-off-by: Nicolas Lebedenco <nicolas@lebedenco.net>
Adds release notes about the addition of a socs folder for
applications to store Kconfig fragments and devicetree overlays
Signed-off-by: Jamie McCrae <jamie.mccrae@nordicsemi.no>
Adds details about Kconfig fragments and devicetree overlay files
that will be included in a build if they are found in the
``socs`` folder
Signed-off-by: Jamie McCrae <jamie.mccrae@nordicsemi.no>
Adds support for SoC overlay files which go in a ``socs`` folder
in application folders and functions similar to the ``boards``
folder, but works for SoCs instead of boards
Signed-off-by: Jamie McCrae <jamie.mccrae@nordicsemi.no>
