The RTC peripheral found in the SAMD5x/SAME5x MCUs is very
simmilar to the one found in existing sam0 devices with only
a few changes to register names and the clock source selection.
Signed-off-by: Benjamin Valentin <benpicco@googlemail.com>
Before introducing the code for ARM64 (AArch64) we need to relocate the
current ARM code to a new AArch32 sub-directory. For now we can assume
that no code is shared between ARM and ARM64.
There are no functional changes. The code is moved to the new location
and the file paths are fixed to reflect this change.
Signed-off-by: Carlo Caione <ccaione@baylibre.com>
Low frequency and high frequency clocks had separate devices
while they are actually handled by single peripheral with single
interrupt. The split was done probably because opaque subsys
argument in the API was used for other purposes and there was
no way to pass the information which clock should be controlled.
Implementation changes some time ago and subsys parameter was
no longer used. It now can be used to indicate which clock should
be controlled.
Change become necessary when nrf5340 is taken into account where
there are more clocks and current approach would lead to create
multiple devices - mess.
Signed-off-by: Krzysztof Chruscinski <krzysztof.chruscinski@nordicsemi.no>
Bool symbols implicitly default to 'n'.
A 'default n' can make sense e.g. in a Kconfig.defconfig file, if you
want to override a 'default y' on the base definition of the symbol. It
isn't used like that on any of these symbols though.
Also replace some
config
prompt "foo"
bool/int
with the more common shorthand
config
bool/int "foo"
See the 'Style recommendations and shorthands' section in
https://docs.zephyrproject.org/latest/guides/kconfig/index.html.
Signed-off-by: Ulf Magnusson <Ulf.Magnusson@nordicsemi.no>
When setting a timeout measure the number of accumulated unannounced
ticks. If this value exceeds half the 24-bit cycle counter range
force an announcement so the unannounced cycles are incorporated into
the system tick counter.
Signed-off-by: Peter Bigot <peter.bigot@nordicsemi.no>
Some early tickless drivers had a common pattern where they would
compute a tick maximum for the request (i.e. the maximum the hardware
counter can handle) but apply it only on the input tick value and not
on the adjusted final value, opening up the overflow condition it was
supposed to have prevented.
Fixes#20939 (Strictly it fixes the specific pattern that was
discovered in that bug. It's not impossible that other drivers with
alternative implementations have a similar issue, though they look OK
to me via a quick audit).
Signed-off-by: Andy Ross <andrew.j.ross@intel.com>
Similar to what we do in other timer drivers, the maximum ticks
supplied in z_clock_set_timeout(..) needs to be MAX_TICKS at
maximum, when K_FOREVER is supplied as argument to the function.
In addition to that, the value we load onto the SysTick LOAD
register shall be truncated to MAX_CYCLES. This is required
to prevent loading a trash value to LOAD register, as only
the lowest 24 bits may be safely written.
Finally, we move the enforcement of the minimum delay to be
programmed on LOAD (i.e. MIN_DELAY) at the end step of the
calculation of the cycles-to-be-programmed. This prevents
from misscalculating the delay, as any required adjustment
is applied at the end, after the delay is rounded up to
the next tick boundary.
Signed-off-by: Ioannis Glaropoulos <Ioannis.Glaropoulos@nordicsemi.no>
When setting a timeout measure the number of accumulated unannounced
ticks. If this value exceeds half the 32-bit cycle counter range
force an announcement so the unannounced cycles are incorporated into
the system tick counter.
Signed-off-by: Peter Bigot <peter.bigot@nordicsemi.no>
The commit fixes the update of the absolute counter of HW cycles
in the SysTick ISR for TICKLESS mode.
Signed-off-by: Ioannis Glaropoulos <Ioannis.Glaropoulos@nordicsemi.no>
The previous solution depended on a magic number and was inefficient
(entered the second-wrap conditional even when a second wrap hadn't
been observed). Replace with an algorithm that is deterministic.
Signed-off-by: Peter Bigot <peter.bigot@nordicsemi.no>
Add detailed documentation for the internal 'elapsed()'
function, as well as for the local counter variables used
in the SysTick driver.
Signed-off-by: Ioannis Glaropoulos <Ioannis.Glaropoulos@nordicsemi.no>
Unsupported bits of the Current Value Register
are read as zero, so we remove the redundant
ANDing with the max supported counter value.
Signed-off-by: Ioannis Glaropoulos <Ioannis.Glaropoulos@nordicsemi.no>
The original code assumed that limiting the tick count to the maximum
cycle value representable without wrapping would guarantee that adding
the resulting cycle offset to last_count would not lap the counter.
This is not true when elapsed time, which is also added to the cycle
offset, exceeds one tick. Cap the maximum offset at the number of
cycles corresponding to the maximum number of ticks without wrapping.
Signed-off-by: Peter Bigot <peter.bigot@nordicsemi.no>
* fix the smp timer dirver bugs found in debug and test.
for smp case, GFRC is used as clock source, and local
internal timer is used to trigger time event.
* because 64-bits gfrc is used, so idle can be igored as no kernel
tick will be missed
Signed-off-by: Wayne Ren <wei.ren@synopsys.com>
Mark the old time conversion APIs deprecated, leave compatibility
macros in place, and replace all usage with the new API.
Signed-off-by: Andy Ross <andrew.j.ross@intel.com>
Promote the private z_arch_* namespace, which specifies
the interface between the core kernel and the
architecture code, to a new top-level namespace named
arch_*.
This allows our documentation generation to create
online documentation for this set of interfaces,
and this set of interfaces is worth treating in a
more formal way anyway.
Signed-off-by: Andrew Boie <andrew.p.boie@intel.com>
This commit refactors kernel and arch headers to establish a boundary
between private and public interface headers.
The refactoring strategy used in this commit is detailed in the issue
This commit introduces the following major changes:
1. Establish a clear boundary between private and public headers by
removing "kernel/include" and "arch/*/include" from the global
include paths. Ideally, only kernel/ and arch/*/ source files should
reference the headers in these directories. If these headers must be
used by a component, these include paths shall be manually added to
the CMakeLists.txt file of the component. This is intended to
discourage applications from including private kernel and arch
headers either knowingly and unknowingly.
- kernel/include/ (PRIVATE)
This directory contains the private headers that provide private
kernel definitions which should not be visible outside the kernel
and arch source code. All public kernel definitions must be added
to an appropriate header located under include/.
- arch/*/include/ (PRIVATE)
This directory contains the private headers that provide private
architecture-specific definitions which should not be visible
outside the arch and kernel source code. All public architecture-
specific definitions must be added to an appropriate header located
under include/arch/*/.
- include/ AND include/sys/ (PUBLIC)
This directory contains the public headers that provide public
kernel definitions which can be referenced by both kernel and
application code.
- include/arch/*/ (PUBLIC)
This directory contains the public headers that provide public
architecture-specific definitions which can be referenced by both
kernel and application code.
2. Split arch_interface.h into "kernel-to-arch interface" and "public
arch interface" divisions.
- kernel/include/kernel_arch_interface.h
* provides private "kernel-to-arch interface" definition.
* includes arch/*/include/kernel_arch_func.h to ensure that the
interface function implementations are always available.
* includes sys/arch_interface.h so that public arch interface
definitions are automatically included when including this file.
- arch/*/include/kernel_arch_func.h
* provides architecture-specific "kernel-to-arch interface"
implementation.
* only the functions that will be used in kernel and arch source
files are defined here.
- include/sys/arch_interface.h
* provides "public arch interface" definition.
* includes include/arch/arch_inlines.h to ensure that the
architecture-specific public inline interface function
implementations are always available.
- include/arch/arch_inlines.h
* includes architecture-specific arch_inlines.h in
include/arch/*/arch_inline.h.
- include/arch/*/arch_inline.h
* provides architecture-specific "public arch interface" inline
function implementation.
* supersedes include/sys/arch_inline.h.
3. Refactor kernel and the existing architecture implementations.
- Remove circular dependency of kernel and arch headers. The
following general rules should be observed:
* Never include any private headers from public headers
* Never include kernel_internal.h in kernel_arch_data.h
* Always include kernel_arch_data.h from kernel_arch_func.h
* Never include kernel.h from kernel_struct.h either directly or
indirectly. Only add the kernel structures that must be referenced
from public arch headers in this file.
- Relocate syscall_handler.h to include/ so it can be used in the
public code. This is necessary because many user-mode public codes
reference the functions defined in this header.
- Relocate kernel_arch_thread.h to include/arch/*/thread.h. This is
necessary to provide architecture-specific thread definition for
'struct k_thread' in kernel.h.
- Remove any private header dependencies from public headers using
the following methods:
* If dependency is not required, simply omit
* If dependency is required,
- Relocate a portion of the required dependencies from the
private header to an appropriate public header OR
- Relocate the required private header to make it public.
This commit supersedes #20047, addresses #19666, and fixes#3056.
Signed-off-by: Stephanos Ioannidis <root@stephanos.io>
Use this short header style in all Kconfig files:
# <description>
# <copyright>
# <license>
...
Also change all <description>s from
# Kconfig[.extension] - Foo-related options
to just
# Foo-related options
It's clear enough that it's about Kconfig.
The <description> cleanup was done with this command, along with some
manual cleanup (big letter at the start, etc.)
git ls-files '*Kconfig*' | \
xargs sed -i -E '1 s/#\s*Kconfig[\w.-]*\s*-\s*/# /'
Signed-off-by: Ulf Magnusson <Ulf.Magnusson@nordicsemi.no>
Clean up space errors and use a consistent style throughout the Kconfig
files. This makes reading the Kconfig files more distraction-free, helps
with grepping, and encourages the same style getting copied around
everywhere (meaning another pass hopefully won't be needed).
Go for the most common style:
- Indent properties with a single tab, including for choices.
Properties on choices work exactly the same syntactically as
properties on symbols, so not sure how the no-indentation thing
happened.
- Indent help texts with a tab followed by two spaces
- Put a space between 'config' and the symbol name, not a tab. This
also helps when grepping for definitions.
- Do '# A comment' instead of '#A comment'
I tweaked Kconfiglib a bit to find most of the stuff.
Some help texts were reflowed to 79 columns with 'gq' in Vim as well,
though not all, because I was afraid I'd accidentally mess up
formatting.
Signed-off-by: Ulf Magnusson <Ulf.Magnusson@nordicsemi.no>
There are two set of code supporting x86_64: x86_64 using x32 ABI,
and x86 long mode, and this consolidates both into one x86_64
architecture and SoC supporting truly 64-bit mode.
() Removes the x86_64:x32 architecture and SoC, and replaces
them with the existing x86 long mode arch and SoC.
() Replace qemu_x86_64 with qemu_x86_long as qemu_x86_64.
() Updates samples and tests to remove reference to
qemu_x86_long.
() Renames CONFIG_X86_LONGMODE to CONFIG_X86_64.
Signed-off-by: Daniel Leung <daniel.leung@intel.com>
Removed workarounds in systick driver as they prevent normal usage in
TICKLESS systems. Driver still behaved like an interrupt based ticker.
Signed-off-by: Andrei Gansari <andrei.gansari@nxp.com>
Defining a symbol with 'menuconfig' just tells the menuconfig to display
any dependent symbols that immediately follow it in a separate menu.
'menuconfig' has no effect on symbol values.
Making a symbol that doesn't have any dependent symbols after it a
'menuconfig' should be avoided, because then you end up with an empty
menu, which is shown as e.g.
[*] Enable foo ---
This is how it would be shown if there were children but they all
happened to be invisible as well.
With a regular 'config', it turns into
[*] Enable foo
Change all pointless 'menuconfig's to 'config's.
See the section on 'menuconfig' on the Kconfig - Tips and Best Practices
page as well.
Signed-off-by: Ulf Magnusson <Ulf.Magnusson@nordicsemi.no>
This commit switches from using device tree automatically
generated address-based defines to the instance id-based ones.
Without this change it is not be possible to re-use the driver
on boards where the device is located at different location
than 0xe0002800.
Signed-off-by: Mateusz Holenko <mholenko@antmicro.com>
This patch re-namespaces global variables and functions
that are used only within the arch/arm/ code to be
prefixed with z_arm_.
Some instances of CamelCase have been corrected.
Signed-off-by: Andrew Boie <andrew.p.boie@intel.com>
Fix an inline comment in nrf_rtc_timer.c correcting the
path to the mentioned test.
Signed-off-by: Ioannis Glaropoulos <Ioannis.Glaropoulos@nordicsemi.no>
Global variables related to timing information have been
renamed to be prefixed with z_arch, with naming arranged
in increasing order of specificity.
Signed-off-by: Andrew Boie <andrew.p.boie@intel.com>
At least twice (to be fair: twice among thousands of test runs), I've
seen this device return "backwards" times in SMP, where the counter
value read from one CPU is behind the saved value already seen on the
other. On hardware this should obviously never happen, HPET is a
single global device.
Add a simple workaround on QEMU targets so the math doesn't blow up.
Signed-off-by: Andy Ross <andrew.j.ross@intel.com>
Header files of nrfx HALs are not supposed to be included directly
but only with their names prepended with the hal/ directory (so that
an inclusion of an nrfx HAL header clearly differs from an inclusion
of an nrfx driver header).
Signed-off-by: Andrzej Głąbek <andrzej.glabek@nordicsemi.no>
Add RTC timer driver for CC13X2/CC26X2, and use it instead of systick
as system clock. It is necessary to use this timer for power
management support, so that the system can exit from deep sleep upon
expiry of timeouts.
Signed-off-by: Vincent Wan <vincent.wan@linaro.org>
This driver was still using CONFIG_* values to determine its address,
IRQ, etc. Add a binding for an "intel,hpet" device and migrate this
driver to devicetree.
Fixes: #18657
Signed-off-by: Charles E. Youse <charles.youse@intel.com>
We re-wrote the xtensa arch code, but never got around
to purging the old implementation.
Removed those boards which hadn't been moved to the new
arch code. These were all xt-sim simulator targets and not
real hardware.
Fixes: #18138
Signed-off-by: Andrew Boie <andrew.p.boie@intel.com>
MEC1501 RTOS timer internal counter is on the 32KHz clock domain.
The register interface is on the AHB clock. When the timer is started
hardware synchronizes to the next 32KHz clock edge resulting is a
variable delay moving the value in the preload register into the
count register. The maximum delay is one 32KHz clock period (30.5 us).
We work-around this delay by checking if the timer has been started
and not using the count value which is still 0. Instead we state zero
counts have elapsed.
Signed-off-by: Scott Worley <scott.worley@microchip.com>
The variable enabling entry to the zero latency interrupt compensation
loop was named generically, and its logic inverted, making the code
difficult to understand. Change the name and initial value to more
clearly indicate its role.
Signed-off-by: Peter Bigot <peter.bigot@nordicsemi.no>
* it's based on ARC SecureShield
* add basic secure service in arch/arc/core/secureshield
* necesssary changes in arch level
* thread switch
* irq/exception handling
* initialization
* add secure time support
Signed-off-by: Wayne Ren <wei.ren@synopsys.com>
* use global free running counter as global wall clock (clock source)
* use arc internal timer 0 as local time event (clock event)
Signed-off-by: Wayne Ren <wei.ren@synopsys.com>
Update the logic in a corner case, when the target comparator value is
one cycle ahead of the counter value.
Experiments have shown, that `set_comparator(cyc + 1);` might be not
enough in that case, and we still may (rarely) miss the interrupt.
This could happen when the counter incremented its value after the `dt`
variable was set. As we should set the comparator value two cycles
ahead to be on the safe side, increment the target comparator value
by 2 instead of 1.
Signed-off-by: Robert Lubos <robert.lubos@nordicsemi.no>
Add a kernel timer driver for the MEC1501 32KHz RTOS timer.
This timer is a count down 32-bit counter clocked at a fixed
32768 Hz. It features one-shot, auto-reload, and halt count down
while the Cortex-M is halted by JTAG/SWD. This driver is based
on the new Intel local APIC driver. The driver was tuned for
accuracy at small sleep values. Added a work-around for RTOS
timer restart issue. RTOS timer driver requires board ticks per
second to be 32768 if tickless operation is configured.
Signed-off-by: Scott Worley <scott.worley@microchip.com>
On some SoCs the frequency of the system clock is obtained at run time
as the exact configuration of the hardware is not known at compile time.
On such platforms using CONFIG_SYS_CLOCK_HW_CYCLES_PER_SEC define
directly introduces timing errors.
This commit replaces CONFIG_SYS_CLOCK_HW_CYCLES_PER_SEC by the call
to inline function sys_clock_hw_cycles_per_sec() which always returns
correct frequency of the system clock.
Signed-off-by: Piotr Zięcik <piotr.ziecik@nordicsemi.no>
The native_posix timer driver was still using the
legacy timer API.
Replace it with a new version, which is aligned with
the new kernel<->system timer driver API,
and which has TICKLESS_CAPABLE support
Signed-off-by: Alberto Escolar Piedras <alpi@oticon.com>
When the tick rate was less than MIN_DELAY, bumping a "too soon"
expiration by just one tick may not be enough and we could
theoretically miss the counter.
Instead, eliminate the MIN_DELAY computation and write to the spec:
NRF guarantees that the RTC will generate an interrupt for a
comparator value two cycles in the future. And further, we can test
at the set point to see if we "just missed" the interrupt (i.e. zero
cycles delay) and flag a synchronous interrupt. So we only need to
miss a requested interrupt now for the special case of exactly one
cycle in the future, and then we're only late by one cycle. That's
optimal.
Also fixes an off-by-one in the next cycle computation. By API
convention, an ticks argument of one or less means "at the next tick"
and not "right now". So we need to add one to the target cycle to
avoid incorrectly triggering a synchronous interrupt. This was a
non-issue when a tick is longer than a hardware cycle but is needed
now.
Also handles the edge case with zero latency interrupts (which are
unmaskable) which might mess up timing. This was always a problem,
but we're more sensitive now and it's comparatively more likely to
occur.
Signed-off-by: Andy Ross <andrew.j.ross@intel.com>
The MVIC is no longer supported, and only the APIC-based interrupt
subsystem remains. Thus this layer of indirection is unnecessary.
This also corrects an oversight left over from the Jailhouse x2APIC
implementation affecting EOI delivery for direct ISRs only.
Signed-off-by: Charles E. Youse <charles.youse@intel.com>
This is an oddball API. It's untested. In fact testing its proper
behavior requires very elaborate automation (you need a device outside
the Zephyr hardware to measure real world time, and a mechanism for
getting the device into and out of idle without using the timer
driver). And this makes for needless difficulty managing code
coverage metrics.
It was always just a hint anyway. Mark the old API deprecated and
replace it with a kconfig tunable. The effect of that is just to
change the timeout value passed to the timer driver, where we can
manage code coverage metrics more easily (only one driver cares to
actually support this feature anyway).
Signed-off-by: Andy Ross <andrew.j.ross@intel.com>
move misc/util.h to sys/util.h and
create a shim for backward-compatibility.
No functional changes to the headers.
A warning in the shim can be controlled with CONFIG_COMPAT_INCLUDES.
Related to #16539
Signed-off-by: Anas Nashif <anas.nashif@intel.com>
