Add experimental CDC ACM implementation for new USB device stack.
It currently implements only UART IRQ API support and is WIP.
Signed-off-by: Johann Fischer <johann.fischer@nordicsemi.no>
The device supprt brings support for multiple stack instances,
multiple configuration, asynchronous transfer model, ability to
change most of the properties of a device at runtime and
the composition of configuration and classes at runtime.
The stack requires new UDC driver API and is not compatible
with old driver API (usb_dc_). The classes (functions) of old
(current) USB device stack cannot be used with new ones and must
be ported.
Signed-off-by: Johann Fischer <johann.fischer@nordicsemi.no>
Simple test for API rules, allocation, queue, and dequeu
of the endpoint requests. USB device controller should not be
connected to the host as this state is not covered by this test.
Signed-off-by: Johann Fischer <johann.fischer@nordicsemi.no>
Expand ifdef by adding new Kconfig option UDC_KINETIS as
preparation for USBFSOTG UDC driver.
Signed-off-by: Johann Fischer <johann.fischer@nordicsemi.no>
HAL events were also used for the shim driver's concerns
during the prototyping of API. Fix it now and use specific
shim driver events. That also allows new transfers to be
triggered from a single point.
Signed-off-by: Johann Fischer <johann.fischer@nordicsemi.no>
Add new USB device controller API and nRF USBD controller driver.
The new UDC API brings support for multiple instances and asynchronous
transfer model, transfers use net_buf and store methadata in the
user data area.
Signed-off-by: Johann Fischer <johann.fischer@nordicsemi.no>
Add macros to get endpoint address, direction, and attributes.
Remove identical endpoint macros from usb_dc header.
Signed-off-by: Johann Fischer <johann.fischer@nordicsemi.no>
Add RX and TX fifo size properties to CDC ACM UART bindings.
This allows per instance settings in contrast to Kconfig
USB_CDC_ACM_RINGBUF_SIZE option. New properties takes the default
size value of USB_CDC_ACM_RINGBUF_SIZE which can be removed
subsequently.
Signed-off-by: Johann Fischer <johann.fischer@nordicsemi.no>
This commits extracts mesh, gat, gap, l2cap from
bttester.h into corresponding header files for
better readability.
Signed-off-by: Szymon Czapracki <szymon.czapracki@codecoup.pl>
Set the inverted value of pixel format setting in MADCTL register to
current_pixel_format in display capabilities structure
if rgb-is-inverted enabled.
This make enables support for a module that mismatches the RGB setting
in the MADCTL register and the actual display color format.
(Such as Longan Nano built-in LCD module.)
Signed-off-by: TOKITA Hiroshi <tokita.hiroshi@gmail.com>
Add rgb-is-inverted option to indicate module's pixel-format is
inverting from MADCTL settings of ST7735R controller.
This option intends to implement a workaround for LCD modules
that is the actual screen color was different (inverted)
from the RGB setting in MADCTL property.
Signed-off-by: TOKITA Hiroshi <tokita.hiroshi@gmail.com>
The `audio connect` shell command did not really do
anything anymore, and has thus been removed.
Signed-off-by: Emil Gydesen <emil.gydesen@nordicsemi.no>
Some of the unicast audio shell commands were guarded by
CONFIG_BT_AUDIO_UNICAST_CLIENT and only usable by the client.
This moves some of the commands to a CONFIG_BT_AUDIO_UNICAST
guard instead, so that they are usable for builds with just
the server.
Signed-off-by: Emil Gydesen <emil.gydesen@nordicsemi.no>
Add a sample program demonstrating the LED driver for Microchip's
XEC microcontrollers. The sample can be built for MEC152x and
MEC172x.
Signed-off-by: Jay Vasanth <jay.vasanth@microchip.com>
Implement a LED driver for Microchip XEC using the breathing,
blinking LED controller. The driver supports LED on, off, and
blink API's. The BBLED block uses the 32768 Hz clock domain
allowing the module to operate in light and deep sleep states.
Blink frequency is 32768 divided by 256 * (prescale + 1) where
prescale is a 12-bit value. Duty cycle is specified by an 8-bit
value where 0 = full off, 127 is 50%, and 255 is full on.
Signed-off-by: Jay Vasanth <jay.vasanth@microchip.com>
When dealing with groups, the specified window in
linear_range_group_get_win_index can span across multiple groups. In the
current implementation, if maximum value was not in the same sub-window
as the minimum value the function would return -EINVAL. This patch fixes
the problem and updates test cases to cover such scenario.
Signed-off-by: Gerard Marull-Paretas <gerard.marull@nordicsemi.no>
Add clarification about the representation of the data
in the buffer of a multi-channel ADC sequence.
Signed-off-by: Declan Snyder <declan.snyder@nxp.com>
Add new variant configuration of it81202cx and it81302cx.
This cx variant of it81xx2 changes are as follows:
1. SRAM size will increase from 60k to 128k.
2. Configurable ILM size is still 60k.
3. Support M extension of RISC-V.
Signed-off-by: Tim Lin <tim2.lin@ite.corp-partner.google.com>
The OSPI flash driver expects size in bits.
Use bits instead of bytes for the size.
Signed-off-by: Francois Ramu <francois.ramu@st.com>
Signed-off-by: Georgij Cernysiov <geo.cgv@gmail.com>
This fixes VCP Volume Renderer linker error that was seen if built
with VOCS and/or AICS support disabled.
Signed-off-by: Mariusz Skamra <mariusz.skamra@codecoup.pl>
This seems to have caused build failures in spite of CI being
green in PR 52653.
This reverts commit fc92eb1b37.
Signed-off-by: Chris Friedt <cfriedt@meta.com>
This seems to have caused build failures in spite
of CI passing in PR 52653.
This reverts commit 0a02a4a2af.
Signed-off-by: Chris Friedt <cfriedt@meta.com>
Declarations for `getopt()` should be in `<unistd.h>`
according to the spec. The extended versions `getopt_long()`
and `getopt_long_only()` are declared in `<getopt.h>`.
Signed-off-by: Chris Friedt <cfriedt@meta.com>
The cache operations must be quick, optimized and possibly inlined. The
current API is clunky, functions are not inlined and passing parameters
around that are basically always known at compile time.
In this patch we rework the cache functions to allow us to get rid of
useless parameters and make inlining easier.
In particular this changeset is doing three things:
1. `CONFIG_HAS_ARCH_CACHE` is now `CONFIG_ARCH_CACHE` and
`CONFIG_HAS_EXTERNAL_CACHE` is now `CONFIG_EXTERNAL_CACHE`
2. The cache API has been reworked.
3. Comments are added.
Signed-off-by: Carlo Caione <ccaione@baylibre.com>
Lauterbach provides the particular version of the TRACE32 limited to
use with the Arduino Nano 33 BLE. The license of it ties to Arduino Nano
33 BLE hardware serial number. It also works with the ZephyrRTOS.
Add configuration for GDB-Frontend version of TRACE32.
Limitation: This patch support only 'debug' command
Signed-off-by: TOKITA Hiroshi <tokita.hiroshi@fujitsu.com>
Re-enable the CAAM for entropy
now that the HAL driver has been fixed
Job descriptors must be accessed coherently
between CAAM DMA and core.
The M4 Cores still do not work
because of mpu/cache/kconfig arch complications,
disable caam for M4 cores in DTS
Signed-off-by: Declan Snyder <declan.snyder@nxp.com>
Add a Kconfig option to put the buffer for random numbers
in the nocache region instead of on the stack.
Signed-off-by: Declan Snyder <declan.snyder@nxp.com>
Do not build "raw" binary for qemu boards. It was already disabled for
all qemu boards except for qemu_x86_64. This also prevents exposing
bug with llvm when building "raw" binary using unsupported options in
objcopy.
Signed-off-by: Andrei Emeltchenko <andrei.emeltchenko@intel.com>
Introduce the Kconfig symbol `NET_PKT_BUF_USER_DATA_SIZE`. It is used to
set the user data size in the buffers used in the rx and tx network buffer
pools.
Signed-off-by: Christian Taedcke <christian.taedcke@lemonbeat.com>
