In the docs replace references to native_posix with native_sim
Switch the default test platform to native_sim from native_posix
Signed-off-by: Alberto Escolar Piedras <alberto.escolar.piedras@nordicsemi.no>
Replace native_posix with native_sim as the
default integration platform.
Signed-off-by: Alberto Escolar Piedras <alberto.escolar.piedras@nordicsemi.no>
Instead of always enabling fuse for native_posix,
let's give users instructions on how to enable it
while building.
In the documentation: replace the references to native_posix
with native_sim, improve the links, mention the flash
simulator, and provide a separate subsection for FUSE access.
Add a separate test for the sample with fuse access enabled
and be sure it is possible to run both this and the basic
one with native_sim (was filtered out before for native_posix)
Signed-off-by: Alberto Escolar Piedras <alberto.escolar.piedras@nordicsemi.no>
DTLS Connection Identifier support requires DTLS stack
that supports it. MbedTLS support in Zephyr is already
ported in, also some offloaded sockets support it.
Signed-off-by: Seppo Takalo <seppo.takalo@nordicsemi.no>
Since model struct most of member should not change at run time,
so mark as const will be suitable and safely.
Signed-off-by: Lingao Meng <menglingao@xiaomi.com>
Allow this sample in native_sim, and set it as default
integration platform instead of native_posix.
Signed-off-by: Alberto Escolar Piedras <alberto.escolar.piedras@nordicsemi.no>
Allow this sample in native_sim, and set it as default
integration platform instead of native_posix.
Signed-off-by: Alberto Escolar Piedras <alberto.escolar.piedras@nordicsemi.no>
native_posix and native_sim are already excluded thru
the lack of required tags.
Let's remove the platform exclude instead of adding also
native_sim to it explicitly.
Signed-off-by: Alberto Escolar Piedras <alberto.escolar.piedras@nordicsemi.no>
Replace one of the dynamic threads with a static thread to show the
all the possible ways of creating threads.
Signed-off-by: Vilem Gottwald <xvigo.dev@gmail.com>
This commit has no functional changes. It makes the comments up to date
with the code and changes the code structure to ensure consistency.
These inconsistencies were introduced when the static thread definition
was replaced with dynamic, but the comments remained unchanged.
- Fixed outdated comments about the static approach that were
not corresponding to the code.
- Rearrange thread definitions, to obtain similar code structure
for both threads.
Signed-off-by: Vilem Gottwald <xvigo.dev@gmail.com>
For several samples that today have native_sim
enabled, enable them also for native_sim.
And set native_sim as default integration_platform
instead of native_posix.
Signed-off-by: Alberto Escolar Piedras <alberto.escolar.piedras@nordicsemi.no>
* In the sample doc, replace native_posix references with native_sim
* Enable native_sim in the sample yaml
Signed-off-by: Alberto Escolar Piedras <alberto.escolar.piedras@nordicsemi.no>
* In the sample doc, replace native_posix references with native_sim
* Enable native_sim in the sample yaml, and switch
integration_platform
Signed-off-by: Alberto Escolar Piedras <alberto.escolar.piedras@nordicsemi.no>
* In the sample doc, replace native_posix references with native_sim
* Provide overlays for native_sim
* Enable native_sim in the sample yaml
* Remove native_posix from the sample yaml platform_allow as it was
filtered out by the host libC
Signed-off-by: Alberto Escolar Piedras <alberto.escolar.piedras@nordicsemi.no>
* In the sample doc, replace native_posix references with native_sim
* Provide overlays for native_sim
* Enable native_sim in the test yaml
Signed-off-by: Alberto Escolar Piedras <alberto.escolar.piedras@nordicsemi.no>
* In the sample doc and shell script,
replace native_posix references with native_sim
* Provide overlays for native_sim(_64)
* Enable native_sim in the test yaml
Signed-off-by: Alberto Escolar Piedras <alberto.escolar.piedras@nordicsemi.no>
Let's replace the references to native_posix with native_sim.
Background: during this release native_sim is replacing
native_posix as the main host test/development platform.
Signed-off-by: Alberto Escolar Piedras <alberto.escolar.piedras@nordicsemi.no>
Rename
Networking with native_posix
to
Networking with native_sim
replace all links to this page accordingly
and replace its references to native_posix with native_sim.
Background: during this release native_sim is replacing
native_posix as the main host test/development platform.
Signed-off-by: Alberto Escolar Piedras <alberto.escolar.piedras@nordicsemi.no>
* In the sample doc, replace native_posix references with native_sim
* Provide an overlay for native_sim
* Enable native_sim in the test yaml
Signed-off-by: Alberto Escolar Piedras <alberto.escolar.piedras@nordicsemi.no>
* In the sample doc, replace native_posix references with native_sim
* Provide an overlay for native_sim
* Enable native_sim in the test yaml
Signed-off-by: Alberto Escolar Piedras <alberto.escolar.piedras@nordicsemi.no>
This adds retry logic for ASE state notifications if failed due to
insufficient number of buffers to send ATT PDU. The state transition is
retried after connection interval delay.
Fixes: #64574
Signed-off-by: Mariusz Skamra <mariusz.skamra@codecoup.pl>
In the docs replace the references to native_posix with native_sim.
In the sample, add overlays for native_sim, and add native_sim to filter
and as default integration platform.
Signed-off-by: Alberto Escolar Piedras <alberto.escolar.piedras@nordicsemi.no>
In the docs replace the references to native_posix with native_sim.
And switch the default test platform to native_sim from native_posix.
Signed-off-by: Alberto Escolar Piedras <alberto.escolar.piedras@nordicsemi.no>
In the docs replace the references to native_posix with native_sim.
And switch the default test platform to native_sim from native_posix.
Signed-off-by: Alberto Escolar Piedras <alberto.escolar.piedras@nordicsemi.no>
In the docs replace the references to native_posix with native_sim.
Enable this test in natives_sim.
And switch the default test platform to native_sim from native_posix.
Signed-off-by: Alberto Escolar Piedras <alberto.escolar.piedras@nordicsemi.no>
In the docs replace the references to native_posix with native_sim.
And switch the default test platform to native_sim from native_posix.
Signed-off-by: Alberto Escolar Piedras <alberto.escolar.piedras@nordicsemi.no>
In the docs replace the references to native_posix with native_sim.
And switch the overlays and default test platform to native_sim
from native_posix.
Signed-off-by: Alberto Escolar Piedras <alberto.escolar.piedras@nordicsemi.no>
In the docs replace the references to native_posix with native_sim
Enable native_sim in the tests, and replace native_posix as integration
platform.
Signed-off-by: Alberto Escolar Piedras <alberto.escolar.piedras@nordicsemi.no>
Let's replace the references to native_posix with native_sim in
the documentation, and enable this tests by default in
native_sim.
Signed-off-by: Alberto Escolar Piedras <alberto.escolar.piedras@nordicsemi.no>
Add support for low power mode on the G1120B0MIPI using the RT595. This
configuration is tested via a testcase in samples/drivers/display, which
should validate that the display can be driven by the RT595 when
CONFIG_PM and CONFIG_PM_DEVICE are set.
Signed-off-by: Daniel DeGrasse <daniel.degrasse@nxp.com>
Adds support for using a connected host to
broadcast audio via USB Audio.
Offload LC3 encoding to separate thread.
Signed-off-by: Lars Knudsen <LAKD@demant.com>
PR #63332 introduced a change to the LZ4 sample that set the malloc
arena to an unnecessarily large size.
After testing on native_posix, qemu_m3, and esp32s3_devkitm_appcpu, it
would appear 24K is a much more reasonable (and sufficient) size.
Signed-off-by: Benjamin Cabé <benjamin@zephyrproject.org>
Let's replace the references to native_posix with native_sim,
Background: during this release native_sim is replacing
native_posix as the main host test/development platform.
Signed-off-by: Alberto Escolar Piedras <alberto.escolar.piedras@nordicsemi.no>
Change the variable name from **us** to **ms** and increase its size
to **uint16_t** within the min_alarm_handler function. This update
allows the function to correctly handle the millisecond values in the
range of 0 to 999.
Signed-off-by: Charles Dias <charlesdias.cd@outlook.com>
There are more ipc_service backends that supports multiple endpoint.
This sample can be used for any of those backends, so this commits
makes the sample more generic. The default backend it still icmsg_me,
but now, the sample has files and instructions for icmsg_with_buf
backend.
Signed-off-by: Dominik Kilian <Dominik.Kilian@nordicsemi.no>
When connection manager (CONFIG_NET_CONNECTION_MANAGER) is disabled,
application starts right away. Scenario that it covers is when static
networking is used, like with emulators (QEMU, Native Sim, ...).
Since 'connected' flag was not set in such scenario, the internal loop
inside start_client() has ended up early and stop_udp_and_tcp() was called
quickly after starting TCP and UDP clients.
Set 'connected = true', when connection manager is disabled, so that it is
assumed that connection is working for the whole duration of the
echo-client sample.
Signed-off-by: Marcin Niestroj <m.niestroj@emb.dev>
On SoC series s32ze, Zephyr application cannot run with MPU
disabled, skipping relevant samples/tests
Signed-off-by: Dat Nguyen Duy <dat.nguyenduy@nxp.com>
Introduce a streaming API that uses the same data path as the async API.
This includes features to the decoder:
* Checking if triggers are present
Adding streaming features built ontop of existing triggers:
* Adding 3 operations to be done on a trigger
* include - include the data with the trigger information
* nop - do nothing
* drop - drop the data (flush)
* Add a new sensor_stream() API to mirror sensor_read() but add an
optional handler to be able to cancel the stream.
Signed-off-by: Yuval Peress <peress@google.com>
topic#sensor_stream
Twister treats board revisions as separate boards, so s32z270dc2_r52
revision D must be added to the filters.
Signed-off-by: Manuel Argüelles <manuel.arguelles@nxp.com>
Remove nocopy feature from icmsg_me backend.
The backend is not meant to be used to send big
data chunks thus no-copy feature is removed.
If one wants to use no-copy it is recommended
to use icmsg_me only for control messages while
allocator will shall be written seperately.
Signed-off-by: Emil Obalski <Emil.Obalski@nordicsemi.no>
The current main stack size is not enough for any platform.
This commit stack size was checked for nrf52840 and nrf5340.
Everything works.
Signed-off-by: Aleksandr Khromykh <aleksandr.khromykh@nordicsemi.no>
PR allows to get rid of tinycrypt objects from
the final binary of the ble mesh apps based on
PSA TFM crypto.
Signed-off-by: Aleksandr Khromykh <aleksandr.khromykh@nordicsemi.no>
Added initial version of Infineon AIROC WIFI driver
Added initial version of binding file for Infineon AIROC WIFI
driver
Rename CONFIG_ABSTRACTION_RTOS_COMPONENT_ZEPHYR to
CONFIG_USE_INFINEON_ABSTRACTION_RTOS
Exclude cy8cproto_062_4343w platform from
drivers.modem.esp_at.build test
Change revision hal_infineon to
69c883d3bd9fac8a18dd8384624b8c472a68d06f
Signed-off-by: Nazar Palamar <nazar.palamar@infineon.com>
This patch allow demonstrating fat_fs sample application on
stm32h747i-disco board with SD card.
Build fs_sample using following command
west build -p always -b stm32h747i_disco_m7 \
samples/subsys/fs/fs_sample
Signed-off-by: Murali Karicheri <murali.karicheri@sandc.com>
Reduce the heap and stack sizes needed for the shell loader sample app
so more devices may try it out.
Tried on a mimxrt1010_evk and noted the total ram usage was
approximately 44000 bytes. Prior to this change the mimxrt1010_evk was
unable to run the sample as the bss section overflowed the ram size.
Signed-off-by: Tom Burdick <thomas.burdick@intel.com>
For littleFS, the fstab entries in DTS are ignored currently.
So remove the overlay entries for the same. Also fixed-partitions
can't be used for sdmmc-disk. So remove the same. We just need to
have sdmmc node with zephyr,sdmmc-disk compatible string to have
littleFS working on disk.
build littleFS sample as follows:-
west build -p always -b stm32h747i_disco_m7 \
samples/subsys/fs/littlefs/ -- \
-DOVERLAY_CONFIG=boards/stm32h747i_disco_m7.conf \
-DCONF_FILE=prj_blk.conf
Signed-off-by: Murali Karicheri <murali.karicheri@sandc.com>
* Add support for running interoperability tests with
Qemu X86.
* Remove some debugging messages to allow binary to
fix Qemu Cortex-M3 board.
* Tune buffer and stack sizes to fit all boards.
Signed-off-by: Seppo Takalo <seppo.takalo@nordicsemi.no>
Add an initial test based on the broadcast audio source/sink samples
which runs them together and after waiting for a predefined
amount of time, checks how many audio packets has the
sink received, and if over a threshold, passes the test.
This test can be expanded after to cover more functionality from
these samples.
Signed-off-by: Alberto Escolar Piedras <alberto.escolar.piedras@nordicsemi.no>
Add support for the simulated nrf5340 and nrf52 in these samples,
as well as explicit overlays for the nrf5340dk.
Signed-off-by: Alberto Escolar Piedras <alberto.escolar.piedras@nordicsemi.no>
Fix controller configuration overlay used when
building the controller (for nrf52 targets),
so the sample can connect to the source and get
audio through.
Signed-off-by: Alberto Escolar Piedras <alberto.escolar.piedras@nordicsemi.no>
Instead of handling some of the configuation thru
board overlays let's handle it thru the sample Kconfig
file, which reduces the amount of duplicate lines.
Signed-off-by: Alberto Escolar Piedras <alberto.escolar.piedras@nordicsemi.no>
So that for both the simulated nrf5340 and real HW nrf5340dk
we build both network and application core images.
Signed-off-by: Alberto Escolar Piedras <alberto.escolar.piedras@nordicsemi.no>
So that for both the simulated nrf5340 and real HW nrf5340dk
we build both network and application core images.
Signed-off-by: Alberto Escolar Piedras <alberto.escolar.piedras@nordicsemi.no>
Disable the quadspi mpu region of the nucleo_f746zg
when testing the samples/userspace/shared_mem
or tests/kernel/mem_protect/userspace
The stm32f7 cortex M7 has 8 MPU regions and the one for quadspi prevents
the testcase to PASS.
Signed-off-by: Francois Ramu <francois.ramu@st.com>
Add the stm32-ospi-nor or stm32-qspi-nor compatible to run the sample
on stm32 boards without jedec,spi-nor compatible.
No more config file needed to get the jedec ID and SFDP info from the
external quad- or octo-SPI flash of the stm32 disco boards.
Signed-off-by: Francois Ramu <francois.ramu@st.com>
Move the syscall_handler.h header, used internally only to a dedicated
internal folder that should not be used outside of Zephyr.
Signed-off-by: Anas Nashif <anas.nashif@intel.com>
This adds the required conf and dts overlays required for the
application on stm32h747i-disco board.
Also moved CONFIG_SDMMC_STM32_HWFC option from prj_blk.conf to
nucleo_h743zi_blk.conf as that is STM specific option.
Build the application as
west build -p always -b stm32h747i_disco_m7 \
samples/subsys/fs/littlefs/ -- \
-DOVERLAY_CONFIG=boards/stm32h747i_disco_m7.conf -DCONF_FILE=prj_blk.conf
Signed-off-by: Murali Karicheri <murali.karicheri@sandc.com>
STM32L562 Discovery kit is not compatible with Bluetooth over USB
application.
Add missing information related to the BLE capability of this board.
Signed-off-by: Ali Hozhabri <ali.hozhabri@st.com>
Change the integration target to something more meaningfull,
i.e. something users are more likely want to try it on,
and therefore in which it is better to do more testing.
Signed-off-by: Alberto Escolar Piedras <alberto.escolar.piedras@nordicsemi.no>
Remove the qemu targets for the controller configuration.
As those do not support the controller, it is just meaningless.
Signed-off-by: Alberto Escolar Piedras <alberto.escolar.piedras@nordicsemi.no>
Provide configuration for native_sim instead of native_posix
and enable it in the samples.yaml
native_posix is being deprecated in favour of native_sim.
Signed-off-by: Alberto Escolar Piedras <alberto.escolar.piedras@nordicsemi.no>
Add a test based on the unicase client/server samples
which runs them together and after waiting for a predefined
amount of time, checks how many audio packets has the
client received, and if over a threshold, passes the test.
Signed-off-by: Alberto Escolar Piedras <alberto.escolar.piedras@nordicsemi.no>
Due to this bug:
https://github.com/zephyrproject-rtos/zephyr/issues/64574
We need to increase the number of L2CAP Tx Buffers
so this sample can be used.
Signed-off-by: Alberto Escolar Piedras <alberto.escolar.piedras@nordicsemi.no>
Provide a configuration for the sample we can use
by default with the ISO capable hci_rpmsg controller
sample.
Signed-off-by: Alberto Escolar Piedras <alberto.escolar.piedras@nordicsemi.no>
So that for both the simulated nrf5340 and real HW nrf5340dk
we build both network and application core images.
Signed-off-by: Alberto Escolar Piedras <alberto.escolar.piedras@nordicsemi.no>
So that for both the simulated nrf5340 and real HW nrf5340dk
we build both network and application core images.
Signed-off-by: Alberto Escolar Piedras <alberto.escolar.piedras@nordicsemi.no>
Add support for the simulated nrf5340 and nrf52 in these samples.
And enable building in twister both for these and for the
already supported nrf5340dk.
Signed-off-by: Alberto Escolar Piedras <alberto.escolar.piedras@nordicsemi.no>
Fix build for IMXRT11xx SOCs. The ARM MPU header was missing for the CM4
board overlays, add the required header so the sample can build.
Signed-off-by: Daniel DeGrasse <daniel.degrasse@nxp.com>
The existing driver and sample:
- drivers/bluetooth/hci/rpmsg
- samples/bluetooth/hci_rpmsg
are no longer correctly named, since they now use the IPC subsystem to
send and receive data. The IPC subsystem can use RPMsg as a transport,
but that is one of several selectable backends.
I initially wanted to deprecated both the BT_RPMSG Kconfig option as
well as the zephyr,bt-hci-rpmsg-ipc chosen node in Devicetree. However,
this proved to be undoable in the case of the Kconfig option. This is
because it's a choice option, and those have special behavior. In
particular, the only practical way to deprecate would've been to keep
the old Kconfig option outside the choice (much like it's done in this
commit) but then also add a 'depends on !BT_RPMSG' on each of the
remaining choice symbols *except* on the new BT_HCI_IPC one. This, however,
only works correctly for .conf files. If a board instead sets the
default BT_HCI_BUS_TYPE in the Kconfig.defconfig file then the Kconfig
tree parsing would fail, because it'd try to set it to a value
(BT_RPMSG) that is no longer part of the choice.
Signed-off-by: Carles Cufi <carles.cufi@nordicsemi.no>
Unify spelling of CAN Flexible Data-rate abbreviation to "CAN FD" instead
of "CAN-FD". The former aligns with the CAN in Automation (CiA)
recommendation.
Signed-off-by: Henrik Brix Andersen <hebad@vestas.com>
README now cross-references the lora receive sample
so that both can be used together more easily.
Signed-off-by: ingram weeks <ingram.weeks@gmail.com>
In 85bb2624bc
init_lc3()'s prototype was changed to return an int,
but the code was not updated to return something !=0
on all errors, or 0 on error.
Fix it.
Signed-off-by: Alberto Escolar Piedras <alberto.escolar.piedras@nordicsemi.no>
The lc3_enable code was refering to a variable that does not exist.
Fix it.
Issue was introduced in 9c47eb924f.
Signed-off-by: Alberto Escolar Piedras <alberto.escolar.piedras@nordicsemi.no>
This commit adds a sample which configures a GNSS modem
to enable all available systems, registers callbacks to
the GNSS data and satellites callbacks, and prints the
GNSS data and satellites from the callbacks when invoked
using printk.
Signed-off-by: Bjarki Arge Andreasen <bjarkix123@gmail.com>
The broadcast audio samples (broadcast_audio_sink
and broadcast_audio_source) are sending mock data,
the apps are improved by using the LC3 module as
the unicast audio samples do.
Signed-off-by: Ping Wang <pinw@demant.com>
Suggest users to use "west config manifest.project-filter +canopennode"
instead of "west config manifest.group-filter +optional" in the sample
documentation to avoid pulling in unrelated, optional modules.
Signed-off-by: Henrik Brix Andersen <hebad@vestas.com>
Convert this sample application build to sysbuild,
and add support for the nrf5340bsim target.
Signed-off-by: Alberto Escolar Piedras <alberto.escolar.piedras@nordicsemi.no>
Enable building this sample on the simulated nrf5340 net
core.
Note that this sample does nothing on its own, as it
requires a companion application core sample to driver it.
Signed-off-by: Alberto Escolar Piedras <alberto.escolar.piedras@nordicsemi.no>
PM should not be enabled by default at the soc level. This is an
application decision and not a platform decision whether to enable or
disable PM features.
Enabling PM by default will result in descripencies and test scope and
failures in tests that do not account for PM being enabled.
Fixes#60359
Signed-off-by: Anas Nashif <anas.nashif@intel.com>
Convert this sample application build to sysbuild,
and update documentation.
Signed-off-by: Alberto Escolar Piedras <alberto.escolar.piedras@nordicsemi.no>
Make sure DEBUG is enabled if this test is run in CI.
Also re-instantiate CONFIG_PM=y which was abusively removed in a previous
change.
Signed-off-by: Erwan Gouriou <erwan.gouriou@st.com>
Aliases, including usbc_port0, start counting from zero. This meant
that the DT alias is inconsistent with the port numbering in the
samples. Change the numbering scheme to start from zero to make this
consistent.
Signed-off-by: Andreas Sandberg <andreas@sandberg.uk>
Samples sometimes need to identify a default USB-C port. Instead of
hard-coding a node label, use the usbc-port0 alias to point to the
correct node.
Signed-off-by: Andreas Sandberg <andreas@sandberg.uk>
Fixes an issue whereby the application init will stall if USB init
failed if it's already been setup, this is likely due to USB CDC
being enabled in which case the failure can be ignored
Signed-off-by: Jamie McCrae <jamie.mccrae@nordicsemi.no>
The sample was at the same time filtered for the whole
posix architecture and had native_posix as its integration platform.
This is selfcontradictory.
In any case, this sample cannot run in native_posix but
can run in native_sim.
So let's fix the filtering.
Signed-off-by: Alberto Escolar Piedras <alberto.escolar.piedras@nordicsemi.no>
This sample shows how to use flash_mmap() call to enable custom flash
area to be mapped into data region.
Signed-off-by: Sylvio Alves <sylvio.alves@espressif.com>
Instead of forcing use of NEWLIB_LIBC, select any available complete C
library implementation. Add CONFIG_REQUIRES_FLOAT_PRINTF and adjust
CONFIG_LIBC_MALLOC_ARENA_SIZE as needed.
Signed-off-by: Keith Packard <keithp@keithp.com>
One of the nrfx_uarte event structure members was renamed,
so the sample code has to be aligned.
Signed-off-by: Nikodem Kastelik <nikodem.kastelik@nordicsemi.no>
Add installation instruction for adding nanopb to the west workspace.
This is required because it is optional and not installed by default.
Signed-off-by: Pieter De Gendt <pieter.degendt@basalte.be>
Two substests (userspace and rtt) cannot be run in the posix
architecture.
Today they are filtered by kconfig, which works but spends
time running cmake.
As native_posix is a default test platform it is better
to filter it alltogether by arch, which saves quite a lot
of time.
Signed-off-by: Alberto Escolar Piedras <alberto.escolar.piedras@nordicsemi.no>
These samples & tests cannot be run in this architecture
as it does not support userspace.
Today they are filtered by kconfig, which works but spends
time running cmake.
As native_posix is a default test platform it is better
to filter it alltogether by arch, which saves quite a lot
of time.
Signed-off-by: Alberto Escolar Piedras <alberto.escolar.piedras@nordicsemi.no>
Compiler can't tell that k_thread_abort() won't return and issues a
warning unless we tell it that control never gets this far.
Signed-off-by: Flavio Ceolin <flavio.ceolin@intel.com>
In the iso_receive sample, the semaphores were not reset in
each iteration.
This caused the ISO receiver to act incorrectly and cause
issues with some controllers.
Signed-off-by: Emil Gydesen <emil.gydesen@nordicsemi.no>
The sample enables CONFIG_NET_IPV4_MAPPING_TO_IPV6 and then
turns off IPV6_V6ONLY option which allows it to support both
IPv6 and IPv4 using the same socket.
Signed-off-by: Jukka Rissanen <jukka.rissanen@nordicsemi.no>
The BT Core Spec v5.4 allows separate SDU_Interval to
be set on C_To_P and P_To_C directions,
but this is not possible with the existing interface.
This PR splits the interval parameter in the call to
bt_iso_sig_create into one for C_To_P
and one for P_To_C
It also splits the latency parameter into one for
C_To_P and one for P_To_C
Signed-off-by: Andries Kruithof <andries.kruithof@nordicsemi.no>
Bluetooth: ISO: update UI for extended API
The API for setting the SDU interval and latency have been updated.
This PR also updates the setting of these by the user in the shell
and the iso_connected_benchmark sample
Signed-off-by: Andries Kruithof <andries.kruithof@nordicsemi.no>
Fix the west invokation. "-t" is added automatically
to the run goal, otherwise we get a "-t -t" command.
Signed-off-by: Alberto Escolar Piedras <alberto.escolar.piedras@nordicsemi.no>
Prevent infinite loop inside interrupt handler when there is incoming
data available and ring buffer is full.
Signed-off-by: Tomasz Moń <tomasz.mon@nordicsemi.no>
Add ADC support for longan nano.
Tested using samples/drivers/adc. Also added longan_nano.overlay
and updated documentation.
Signed-off-by: Maxin John <maxin.john@gmail.com>
Add test script that uses same configuration that the
interoperability test.
This is only checking that unsecure client registers and
responds to a GET query.
Signed-off-by: Seppo Takalo <seppo.takalo@nordicsemi.no>
Remove gdbstub sample (samples/subsys/debug/gdbstub) as duplicated
by a test (tests/subsys/debug/gdbstub).
Update the GDB stub documentation.
Signed-off-by: Dmitrii Golovanov <dmitrii.golovanov@intel.com>
Clone samples/subsys/debug/gdbstub to tests and convert it back
to a build-only sample aligned with documentation.
Signed-off-by: Dmitrii Golovanov <dmitrii.golovanov@intel.com>
