zephyr/boards/nxp
Manuel Argüelles 5d2670ac1f drivers: pwm: mcux_ftm: allow to select clock source
FTM internal counter can be clocked by one of three clock sources
independent of the module bus clock. This patch introduces a DT property
to perform the clock selection from DT.

DT sources are updated to keep the current clock selection for all boards,
with exception of ucans32k1sic board which is migrated to use system
clock by default, as this seems to be a better choice for most cases.
Some PWM LED samples require slower clock so overlays are added for
those cases.

Signed-off-by: Manuel Argüelles <manuel.arguelles@nxp.com>
2024-04-19 10:08:53 +02:00
..
frdm_k22f drivers: pwm: mcux_ftm: allow to select clock source 2024-04-19 10:08:53 +02:00
frdm_k64f drivers: pwm: mcux_ftm: allow to select clock source 2024-04-19 10:08:53 +02:00
frdm_k82f drivers: pwm: mcux_ftm: allow to select clock source 2024-04-19 10:08:53 +02:00
frdm_kl25z
frdm_kw41z
frdm_mcxn947 boards: nxp: frdm_mcxn947: PWM Support 2024-04-12 16:53:03 -04:00
hexiwear drivers: pwm: mcux_ftm: allow to select clock source 2024-04-19 10:08:53 +02:00
imx8mm_evk boards: nxp: imx8m: remove the UART RDC setup from guide 2024-03-28 16:01:30 -05:00
imx8mn_evk boards: nxp: imx8m: remove the UART RDC setup from guide 2024-03-28 16:01:30 -05:00
imx8mp_evk boards: arm: mimx8mp_evk: Enable spi support 2024-04-02 21:03:47 -04:00
imx8mq_evk
imx8qm_mek boards: nxp: imx8qm_mek: add adsp suffix to board defconfig 2024-04-11 09:07:37 +02:00
imx8qxp_mek boards: nxp: imx8qxp_mek: add pinctrl for SAI1 node 2024-04-02 14:31:15 +01:00
imx8ulp_evk nxp: imx8ulp: enable serial interface 2024-04-12 16:52:38 -04:00
imx93_evk boards: imx93_evk: add led1 alias 2024-03-15 17:13:41 -04:00
lpcxpresso11u68 doc: hwmv2: boards: fix broken NXP links 2024-03-15 18:21:05 -04:00
lpcxpresso51u68
lpcxpresso55s06
lpcxpresso55s16
lpcxpresso55s28 doc: hwmv2: boards: fix broken NXP links 2024-03-15 18:21:05 -04:00
lpcxpresso55s36 drivers: lpc55s36: Remove deprecated CSS driver 2024-04-10 14:11:34 -04:00
lpcxpresso55s69 boards: board dts and defconfig file adjustments 2024-04-09 23:35:54 +02:00
lpcxpresso54114 boards: lpcxpresso54114 : fix board.cmake config error 2024-03-13 22:39:22 +00:00
ls1046ardb boards: Split merged board file configuration up 2024-04-09 23:35:54 +02:00
mimxrt595_evk
mimxrt685_evk boards: nxp: Rename mimxrt685_evk to mimxrt685_evk_mimxrt685s_cm33 2024-04-03 15:41:16 +01:00
mimxrt1010_evk boards: Fix invalid paths 2024-03-22 00:56:51 +01:00
mimxrt1015_evk boards: Fix invalid paths 2024-03-22 00:56:51 +01:00
mimxrt1020_evk dts: nxp: Convert ENET DT default to new binding. 2024-04-18 11:18:31 +02:00
mimxrt1024_evk dts: nxp: Convert ENET DT default to new binding. 2024-04-18 11:18:31 +02:00
mimxrt1040_evk boards: Fix invalid paths 2024-03-22 00:56:51 +01:00
mimxrt1050_evk dts: nxp: Convert ENET DT default to new binding. 2024-04-18 11:18:31 +02:00
mimxrt1060_evk dts: nxp: Convert ENET DT default to new binding. 2024-04-18 11:18:31 +02:00
mimxrt1062_fmurt6 dts: nxp: Convert ENET DT default to new binding. 2024-04-18 11:18:31 +02:00
mimxrt1064_evk dts: nxp: Convert ENET DT default to new binding. 2024-04-18 11:18:31 +02:00
mimxrt1160_evk dts: nxp: Convert ENET DT default to new binding. 2024-04-18 11:18:31 +02:00
mimxrt1170_evk dts: nxp: Convert ENET DT default to new binding. 2024-04-18 11:18:31 +02:00
mr_canhubk3 drivers: can: transceiver: gpio: automatically select GPIO 2024-04-03 21:12:32 +01:00
rd_rw612_bga boards: nxp: rd_rw612_bga add support for USBOTG 2024-04-11 09:09:00 +02:00
rddrone_fmuk66 drivers: pwm: mcux_ftm: allow to select clock source 2024-04-19 10:08:53 +02:00
s32z2xxdc2 dts: bindings: can: remove optional sample point properties 2024-03-17 15:36:19 +01:00
twr_ke18f drivers: pwm: mcux_ftm: allow to select clock source 2024-04-19 10:08:53 +02:00
twr_kv58f220m
ucans32k1sic drivers: pwm: mcux_ftm: allow to select clock source 2024-04-19 10:08:53 +02:00
usb_kw24d512
vmu_rt1170 boards: board dts and defconfig file adjustments 2024-04-09 23:35:54 +02:00
index.rst