zephyr/drivers/ethernet
Michal Sieron e3db9a49c8 ethernet: eth_liteeth: Avoid bitwise operations
With universal LiteX HAL working, there is no need to perform multibyte
reads and writes using bitwise operations.
Just use appropriate `litex_read*` or `litex_write*` function.

Signed-off-by: Michal Sieron <msieron@internships.antmicro.com>
2022-04-29 16:11:53 +02:00
..
phy drivers: remove redundant DEV_NAME helpers 2022-03-15 17:31:51 -04:00
CMakeLists.txt ethernet: Synopsys DesignWare MAC driver 2021-10-27 10:43:05 -04:00
dsa_ksz8xxx.c drivers: ethernet: dsa_ksz8xxx: fix spi bus initialization 2022-03-07 09:54:21 -06:00
dsa_ksz8794.h net: dsa: ksz8794: Fix the port numbering for this ETH switch IC 2021-12-01 13:58:08 -06:00
dsa_ksz8863.h dts: ksz8974: add support for ksz8863 2021-07-26 19:37:22 -04:00
eth.h random: Include header where it is used 2020-07-08 21:05:36 -04:00
eth_dwmac.c everywhere: fix typos 2022-03-14 20:22:24 -04:00
eth_dwmac_mmu.c ethernet: Synopsys DesignWare MAC driver 2021-10-27 10:43:05 -04:00
eth_dwmac_priv.h ethernet: Synopsys DesignWare MAC driver 2021-10-27 10:43:05 -04:00
eth_dwmac_stm32h7x.c pinctrl: require ; after PINCTRL_DT_(INST_)DEFINE macros 2022-01-01 07:39:08 -05:00
eth_e1000.c net: gptp: convert clock sync ratio from float to double 2022-02-11 10:03:05 -06:00
eth_e1000_priv.h drivers: eth: e1000: Add simulated PTP clock device 2021-04-27 12:02:19 +03:00
eth_enc28j60.c ethernet: enc28j60: convert to _dt_spec 2021-08-09 19:50:53 -04:00
eth_enc28j60_priv.h ethernet: enc28j60: convert to _dt_spec 2021-08-09 19:50:53 -04:00
eth_enc424j600.c ethernet: enc424j600: convert to _dt_spec 2021-08-09 19:50:53 -04:00
eth_enc424j600_priv.h ethernet: enc424j600: convert to _dt_spec 2021-08-09 19:50:53 -04:00
eth_gecko.c drivers: remove redundant DEV_NAME helpers 2022-03-15 17:31:51 -04:00
eth_gecko_priv.h drivers: remove redundant DEV_NAME helpers 2022-03-15 17:31:51 -04:00
eth_liteeth.c ethernet: eth_liteeth: Avoid bitwise operations 2022-04-29 16:11:53 +02:00
eth_mcux.c drivers: ethernet: eth_mcux: add support for resetting phy 2022-03-25 15:47:54 -05:00
eth_native_posix.c all: Deprecate UTIL_LISTIFY and replace with LISTIFY 2022-03-08 11:03:30 +01:00
eth_native_posix_adapt.c headers: Refactor kernel and arch headers. 2019-11-06 16:07:32 -08:00
eth_native_posix_priv.h drivers: eth: native_posix: Allow non-root access 2018-10-23 11:08:39 +03:00
eth_sam0_gmac.h drivers: ethernet: eth_sam_gmac: Add SAM0 family support 2020-04-17 04:56:28 -05:00
eth_sam_gmac.c drivers: eth: Update sam/sam0 eth drivers to use pinctrl 2022-03-24 15:45:37 -07:00
eth_sam_gmac_priv.h drivers: eth: Update sam/sam0 eth drivers to use pinctrl 2022-03-24 15:45:37 -07:00
eth_smsc911x.c drivers: ethernet: remove usage of device_pm_control_nop 2021-04-28 10:55:22 -04:00
eth_smsc911x_priv.h drivers: eth_smsc911x_priv: Remove obsolete macros 2022-03-16 10:22:55 +01:00
eth_stellaris.c drivers: eth: stellaris: Fix build error 2022-03-14 11:28:41 +01:00
eth_stellaris_priv.h drivers: ethernet: drop DEV_DATA/DEV_CFG usage 2022-01-19 18:16:02 +01:00
eth_stm32_hal.c drivers: ethernet: stm32: avoid segfault if cannot get RX buffer 2022-03-21 08:44:58 -05:00
eth_stm32_hal_priv.h drivers: ethernet: drop DEV_DATA/DEV_CFG usage 2022-01-19 18:16:02 +01:00
eth_w5500.c ethernet: w5500: convert to _dt_spec 2021-08-09 19:50:53 -04:00
eth_w5500_priv.h ethernet: w5500: convert to _dt_spec 2021-08-09 19:50:53 -04:00
eth_xlnx_gem.c drivers: ethernet: xlnx_gem: remove unnecessary "EOF" comments 2022-04-14 14:43:52 -05:00
eth_xlnx_gem_priv.h drivers: ethernet: xlnx_gem: remove unnecessary "EOF" comments 2022-04-14 14:43:52 -05:00
Kconfig ethernet: Synopsys DesignWare MAC driver 2021-10-27 10:43:05 -04:00
Kconfig.dsa kconfig: remove Enable from boolean prompts 2022-03-09 15:35:54 +01:00
Kconfig.dwmac ethernet: Synopsys DesignWare MAC driver 2021-10-27 10:43:05 -04:00
Kconfig.e1000 kconfig: remove Enable from boolean prompts 2022-03-09 15:35:54 +01:00
Kconfig.enc28j60 drivers: Replace GPIO_CS Kconfig with devicetree detection 2020-05-09 13:07:05 +02:00
Kconfig.enc424j600 drivers: Replace GPIO_CS Kconfig with devicetree detection 2020-05-09 13:07:05 +02:00
Kconfig.gecko drivers: ethernet: remove stale Kconfig IRQ priority 2021-03-03 12:16:06 +03:00
Kconfig.liteeth drivers: ethernet: remove stale Kconfig IRQ priority 2021-03-03 12:16:06 +03:00
Kconfig.mcux drivers: ethernet: eth_mcux: add support for resetting phy 2022-03-25 15:47:54 -05:00
Kconfig.native_posix net: native_posix: gptp: Add multiport support 2020-08-19 12:47:09 -04:00
Kconfig.sam_gmac drivers: eth_sam_gmac: use PHY driver 2021-08-27 11:43:48 -04:00
Kconfig.smsc911x kconfig: Remove '# Hidden' comments on promptless symbols 2019-12-21 10:30:33 -05:00
Kconfig.stellaris kconfig: remove Enable from boolean prompts 2022-03-09 15:35:54 +01:00
Kconfig.stm32_hal drivers: ethernet: stm32_hal: remove superfluous default n for boolean 2022-04-15 10:32:24 -07:00
Kconfig.w5500 drivers: eth: add driver for w5500 Ethernet Controller 2020-10-02 11:34:57 +02:00
Kconfig.xlnx_gem drivers: ethernet: xlnx_gem: update referenced SoC configuration items 2022-01-21 11:34:09 -05:00
phy_gecko.c zephyr: replace zephyr integer types with C99 types 2020-06-08 08:23:57 -05:00
phy_gecko.h zephyr: replace zephyr integer types with C99 types 2020-06-08 08:23:57 -05:00
phy_xlnx_gem.c drivers: ethernet: xlnx_gem: remove unnecessary "EOF" comments 2022-04-14 14:43:52 -05:00
phy_xlnx_gem.h drivers: ethernet: xlnx_gem: remove unnecessary "EOF" comments 2022-04-14 14:43:52 -05:00