| .. |
|
96b_aerocore2
|
boards: add zephyr_udc0 nodelabel to all boards with USB support
|
2021-08-19 16:56:54 +02:00 |
|
96b_argonkey
|
boards: arm: stm32f412 boards change Kconfig
|
2021-10-07 15:38:22 -04:00 |
|
96b_avenger96
|
boards: stm32: Remove pinmux.c files
|
2020-11-03 11:11:04 +01:00 |
|
96b_carbon
|
boards: add zephyr_udc0 nodelabel to all boards with USB support
|
2021-08-19 16:56:54 +02:00 |
|
96b_carbon_nrf51
|
dts: nrf: revert i2c sda-gpios, scl-gpios changes
|
2021-04-20 18:32:04 +02:00 |
|
96b_meerkat96
|
boards: stm32: Remove pinmux.c files
|
2020-11-03 11:11:04 +01:00 |
|
96b_neonkey
|
boards: 96b_neonkey: Use dts for clocks configuration
|
2021-05-04 13:03:46 -05:00 |
|
96b_nitrogen
|
dts: add 'linaro,' prefix to 96b-lscon-1v8, 96b-lscon-3v3
|
2021-05-19 22:18:25 -05:00 |
|
96b_stm32_sensor_mez
|
boards: 96b_stm32_sensor_mez: Use dts for clocks configuration
|
2021-05-04 13:03:46 -05:00 |
|
96b_wistrio
|
boards: 96b_wistrio: rename pinmux board file
|
2021-09-03 08:23:32 -05:00 |
|
actinius_icarus
|
boards: actinius_*: fix board init priority
|
2021-08-02 12:54:36 -05:00 |
|
actinius_icarus_bee
|
boards: actinius_*: fix board init priority
|
2021-08-02 12:54:36 -05:00 |
|
actinius_icarus_som
|
boards: actinius_*: fix board init priority
|
2021-08-02 12:54:36 -05:00 |
|
adafruit_feather_m0_basic_proto
|
boards: arm: sam0: Fix pinmux init prio
|
2021-08-30 09:31:56 -04:00 |
|
adafruit_feather_nrf52840
|
boards: add zephyr_udc0 nodelabel to all boards with USB support
|
2021-08-19 16:56:54 +02:00 |
|
adafruit_feather_stm32f405
|
boards: adafruit_feather_stm32f405: Use dts for clocks configuration
|
2021-05-04 13:10:46 -05:00 |
|
adafruit_itsybitsy_m4_express
|
boards: arm: sam0: Fix pinmux init prio
|
2021-08-30 09:31:56 -04:00 |
|
adafruit_trinket_m0
|
boards: arm: sam0: Fix pinmux init prio
|
2021-08-30 09:31:56 -04:00 |
|
arduino_due
|
boards: arm: correct documentation about SVC exception
|
2021-04-23 15:27:01 -05:00 |
|
arduino_nano_33_ble
|
drivers: console: remove unused CONSOLE selection
|
2021-09-28 12:13:23 +02:00 |
|
arduino_nano_33_iot
|
boards: arm: sam0: Fix pinmux init prio
|
2021-08-30 09:31:56 -04:00 |
|
arduino_zero
|
boards: arm: sam0: Fix pinmux init prio
|
2021-08-30 09:31:56 -04:00 |
|
arty
|
doc: use kconfig role and directive
|
2021-06-29 10:26:28 -04:00 |
|
atsamd20_xpro
|
boards: arm: sam0: Fix pinmux init prio
|
2021-08-30 09:31:56 -04:00 |
|
atsamd21_xpro
|
boards: arm: sam0: Fix pinmux init prio
|
2021-08-30 09:31:56 -04:00 |
|
atsame54_xpro
|
tests: drivers: adc: Add sam0 boards configs
|
2021-09-02 06:45:35 -04:00 |
|
atsamr21_xpro
|
tests: drivers: adc: Add sam0 boards configs
|
2021-09-02 06:45:35 -04:00 |
|
b_l4s5i_iot01a
|
boards: arm: b_l4s5i_iot01a: full Arduino SPI support
|
2021-06-29 11:32:15 -04:00 |
|
b_l072z_lrwan1
|
boards: b_l072z_lrwan1: enable power management support
|
2021-06-24 21:06:25 -04:00 |
|
b_u585i_iot02a
|
boards: b_u585i_iot02a: Provide PM configuration
|
2021-10-07 15:38:40 -04:00 |
|
bbc_microbit
|
dts: nrf: revert i2c sda-gpios, scl-gpios changes
|
2021-04-20 18:32:04 +02:00 |
|
bbc_microbit_v2
|
boards: add zephyr_udc0 nodelabel to all boards with USB support
|
2021-08-19 16:56:54 +02:00 |
|
bcm958401m2
|
driver: uart: ns16550: convert to DT_INST_*
|
2020-03-14 02:22:05 +02:00 |
|
bcm958402m2_m7
|
boards: arm: bcm958402m2_m7: Enable PAXDMA driver
|
2021-03-08 20:24:04 -06:00 |
|
bl652_dvk
|
dts: nrf: revert i2c sda-gpios, scl-gpios changes
|
2021-04-20 18:32:04 +02:00 |
|
bl653_dvk
|
boards: add zephyr_udc0 nodelabel to all boards with USB support
|
2021-08-19 16:56:54 +02:00 |
|
bl654_dvk
|
boards: add zephyr_udc0 nodelabel to all boards with USB support
|
2021-08-19 16:56:54 +02:00 |
|
bl654_sensor_board
|
boards: arm: bl654_sensor_board: Update clock error
|
2021-08-06 07:57:28 -05:00 |
|
bl654_usb
|
boards: arm: bl654_usb: Fix name and identifier
|
2021-09-20 06:17:29 -04:00 |
|
bl5340_dvk
|
boards: arm: bl5340_dvk: Fix broken image
|
2021-10-13 16:41:17 -04:00 |
|
black_f407ve
|
boards: black_f407ve: Use dts for clocks configuration
|
2021-05-04 13:03:46 -05:00 |
|
black_f407zg_pro
|
boards: black_f407zg_pro: Use dts for clocks configuration
|
2021-05-04 13:03:46 -05:00 |
|
blackpill_f401ce
|
boards: stm32: blackpill_f401ce: configure clocks using dt
|
2021-04-30 12:40:24 -05:00 |
|
blackpill_f411ce
|
boards: stm32: blackpill_f411ce: configure clocks using dt
|
2021-04-30 12:40:24 -05:00 |
|
bt6x0
|
boards: arm: bt6x0: Update clock error
|
2021-08-06 07:57:28 -05:00 |
|
bt510
|
boards: arm: bt510: Update clock error
|
2021-08-06 07:57:28 -05:00 |
|
cc26x2r1_launchxl
|
power: dts: Add exit-latency info for SOC_SERIES_CC13X2_CC26X2
|
2021-07-21 17:54:40 +03:00 |
|
cc1352r1_launchxl
|
power: dts: Add exit-latency info for SOC_SERIES_CC13X2_CC26X2
|
2021-07-21 17:54:40 +03:00 |
|
cc1352r_sensortag
|
board: cc1352r_sensortag: add dts entry for hdc2080
|
2021-08-09 13:39:03 -04:00 |
|
cc3220sf_launchxl
|
doc: use kconfig role and directive
|
2021-06-29 10:26:28 -04:00 |
|
cc3235sf_launchxl
|
doc: use kconfig role and directive
|
2021-06-29 10:26:28 -04:00 |
|
circuitdojo_feather_nrf9160
|
boards: rename circuitdojo_feather_nrf9160ns
|
2021-09-20 05:57:24 -04:00 |
|
colibri_imx7d_m4
|
doc: colibri board: Add missing empty lines
|
2021-06-02 08:15:25 -05:00 |
|
contextualelectronics_abc
|
boards: remove USB option for nRF based boards
|
2021-08-03 19:00:12 -04:00 |
|
cy8ckit_062_ble
|
boards: arm: cy8ckit_062_ble: Move shared to common
|
2021-07-02 22:50:29 -04:00 |
|
cy8ckit_062_wifi_bt
|
boards: arm: cy8ckit_062_wifi_bt: Add serial pinctrl and int
|
2021-04-27 09:27:45 -05:00 |
|
decawave_dwm1001_dev
|
dts: nrf: revert i2c sda-gpios, scl-gpios changes
|
2021-04-20 18:32:04 +02:00 |
|
degu_evk
|
boards: degu_evk: add chosen nodes for shell and console
|
2021-08-23 18:53:47 -04:00 |
|
disco_l475_iot1
|
boards: arm: disco_l475_iot1 board DTS of the dma-cell on quadspi
|
2021-07-22 04:52:53 -04:00 |
|
dragino_lsn50
|
boards: dragino_lsn50: Use dts for clocks configuration
|
2021-04-30 12:42:42 -05:00 |
|
dragino_nbsn95
|
boards: arm: Add Dragino NBSN95 NB-IoT node
|
2021-09-03 09:39:37 -04:00 |
|
efm32gg_slwstk6121a
|
boards: silabs: Remove unneeded zephyr_include_directories
|
2021-03-23 16:44:48 -05:00 |
|
efm32gg_stk3701a
|
boards: silabs: Fix board controller init priority
|
2021-03-26 08:40:28 -04:00 |
|
efm32hg_slstk3400a
|
boards: silabs: Fix board controller init priority
|
2021-03-26 08:40:28 -04:00 |
|
efm32pg_stk3401a
|
boards: silabs: Fix board controller init priority
|
2021-03-26 08:40:28 -04:00 |
|
efm32pg_stk3402a
|
boards: silabs: Fix board controller init priority
|
2021-03-26 08:40:28 -04:00 |
|
efm32wg_stk3800
|
boards: silabs: Fix board controller init priority
|
2021-03-26 08:40:28 -04:00 |
|
efr32_radio
|
gecko pwm: pwm description to efr32fg1 and brd4250b
|
2021-04-02 18:45:33 -04:00 |
|
efr32mg_sltb004a
|
boards: efr32mg_sltb004a: Add minimal pwm support
|
2021-09-03 10:11:15 -04:00 |
|
faze
|
dts: atmel/nxp: supress duplicate unit-address warning
|
2021-02-04 10:05:47 -05:00 |
|
frdm_k22f
|
boards: arm: nxp: Add pinctrl-names
|
2021-10-08 10:28:37 -05:00 |
|
frdm_k64f
|
boards: arm: nxp: Add pinctrl-names
|
2021-10-08 10:28:37 -05:00 |
|
frdm_k82f
|
boards: arm: nxp: Add pinctrl-names
|
2021-10-08 10:28:37 -05:00 |
|
frdm_kl25z
|
boards: arm: nxp: Add pinctrl-names
|
2021-10-08 10:28:37 -05:00 |
|
frdm_kw41z
|
boards: arm: nxp: Add pinctrl-names
|
2021-10-08 10:28:37 -05:00 |
|
google_kukui
|
boards: google_kukui: Use dts for clocks configuration
|
2021-05-04 13:01:54 -05:00 |
|
hexiwear_k64
|
boards: arm: nxp: Add pinctrl-names
|
2021-10-08 10:28:37 -05:00 |
|
hexiwear_kw40z
|
boards: arm: nxp: Add pinctrl-names
|
2021-10-08 10:28:37 -05:00 |
|
holyiot_yj16019
|
runners: nrfjprog: boilerplate and recover rework
|
2020-12-09 15:00:24 -06:00 |
|
ip_k66f
|
boards: arm: nxp: Add pinctrl-names
|
2021-10-08 10:28:37 -05:00 |
|
legend
|
boards: arm: Add Legend 3.5" board
|
2021-08-23 08:26:23 -04:00 |
|
lora_e5_dev_board
|
doc: stm32wl and stm32l5 boards: update supported features
|
2021-07-23 16:25:27 -04:00 |
|
lpcxpresso11u68
|
boards: arm: Add arduino_serial to supported list for NXP boards
|
2021-05-18 12:35:39 +03:00 |
|
lpcxpresso55s16
|
drivers: gpio: mcux_lpc: Convert driver to use devicetree port prop
|
2021-05-31 17:45:05 +02:00 |
|
lpcxpresso55s28
|
boards: arm: lpc55s28: Remove Trustzone-M flags
|
2021-08-17 10:26:35 +02:00 |
|
lpcxpresso55s69
|
boards: lpcxpresso55s69: Add I2S support
|
2021-09-01 14:39:03 -04:00 |
|
lpcxpresso54114
|
drivers: console: remove unused CONSOLE selection
|
2021-09-28 12:13:23 +02:00 |
|
mec15xxevb_assy6853
|
Microchip: XEC RTOS timer: Add MEC172x support to driver
|
2021-07-27 09:29:34 -04:00 |
|
mec172xevb_assy6906
|
Microchip: MEC172x: I2C driver
|
2021-08-25 13:07:45 -04:00 |
|
mec1501modular_assy6885
|
boards: arm: mec15xx: Add missing virtual wire GIRQ
|
2021-06-07 23:52:17 -04:00 |
|
mec2016evb_assy6797
|
device: Const-ify all device driver instance pointers
|
2020-09-02 13:48:13 +02:00 |
|
mercury_xu
|
boards: arm: add suport for Enclustra Mercury XU boards
|
2020-12-27 18:16:00 +01:00 |
|
mikroe_clicker_2
|
boards: arm: stm32: clean up dts after clock conversion
|
2021-05-12 08:35:03 -05:00 |
|
mikroe_mini_m4_for_stm32
|
boards: remove USB option for STM32 based boards
|
2021-08-03 19:00:12 -04:00 |
|
mimx8mm_evk
|
boards: i.mx: Remove unneeded zephyr_include_directories
|
2021-03-23 13:41:05 -05:00 |
|
mimxrt685_evk
|
mxrt685: Disabled support for 1.8V USDHC negotiation on RT685 EVK
|
2021-09-16 09:34:02 -04:00 |
|
mimxrt1010_evk
|
boards: mimxrt1010_evk: Fix drive strength in pinmux
|
2021-10-13 10:12:25 -04:00 |
|
mimxrt1015_evk
|
boards: mimxrt1015_evk: Enable SPI on RT1015
|
2021-10-13 10:12:25 -04:00 |
|
mimxrt1020_evk
|
boards: mimxrt1020_evk: Added support for SPI on RT1020
|
2021-10-13 10:12:25 -04:00 |
|
mimxrt1024_evk
|
boards: mimxrt1024_evk: Add SPI support
|
2021-10-13 10:12:25 -04:00 |
|
mimxrt1050_evk
|
boards: mimxrt1050_evk: Added support for LPSPI1 peripheral
|
2021-10-13 10:12:25 -04:00 |
|
mimxrt1060_evk
|
boards: mimxrt1060_evk: Added SPI support for RT1060
|
2021-10-13 10:12:25 -04:00 |
|
mimxrt1064_evk
|
boards: mimxrt1064_evk: Added SPI support for RT1064
|
2021-10-13 10:12:25 -04:00 |
|
mimxrt1170_evk
|
boards: arm: Reset Ethernet PHY after system timer on mimxrt1xxx_evk's
|
2021-09-13 09:31:50 -05:00 |
|
mm_feather
|
boards: mm_feather: add board support for Feather
|
2021-09-03 10:13:54 -04:00 |
|
mm_swiftio
|
soc: arm: nxp_imx: rt: refactor flexspi boot config
|
2021-08-02 12:59:57 -05:00 |
|
mps2_an385
|
boards: arm: mps2_an385: correct flash and SRAM sizes
|
2021-04-23 15:27:01 -05:00 |
|
mps2_an521
|
cmake: increase minimal required version to 3.20.0
|
2021-08-20 09:47:34 +02:00 |
|
mps3_an547
|
boards: mps3_an547: Fix typo in the board documentation
|
2021-08-25 18:01:36 -04:00 |
|
msp_exp432p401r_launchxl
|
kconfig: Rename CONFIG_FLOAT to CONFIG_FPU
|
2020-04-27 19:03:44 +02:00 |
|
npcx7m6fb_evb
|
npcx: Disable I2C controllers by default
|
2021-09-21 18:26:35 -04:00 |
|
npcx9m6f_evb
|
npcx: Disable I2C controllers by default
|
2021-09-21 18:26:35 -04:00 |
|
nrf51_ble400
|
dts: nrf: revert i2c sda-gpios, scl-gpios changes
|
2021-04-20 18:32:04 +02:00 |
|
nrf51_blenano
|
boards: dts: nrf: Remove SoC compatible in top-level compatible
|
2020-04-29 08:20:15 -05:00 |
|
nrf51_vbluno51
|
dts: nrf: revert i2c sda-gpios, scl-gpios changes
|
2021-04-20 18:32:04 +02:00 |
|
nrf51dk_nrf51422
|
dts: nrf: revert i2c sda-gpios, scl-gpios changes
|
2021-04-20 18:32:04 +02:00 |
|
nrf51dongle_nrf51422
|
runners: nrfjprog: boilerplate and recover rework
|
2020-12-09 15:00:24 -06:00 |
|
nrf52_adafruit_feather
|
dts: nrf: revert i2c sda-gpios, scl-gpios changes
|
2021-04-20 18:32:04 +02:00 |
|
nrf52_blenano2
|
dts: nrf: revert i2c sda-gpios, scl-gpios changes
|
2021-04-20 18:32:04 +02:00 |
|
nrf52_sparkfun
|
boards: arm: remove non-existing doc link from partition definitions
|
2020-10-27 15:01:19 -04:00 |
|
nrf52_vbluno52
|
dts: nrf: revert i2c sda-gpios, scl-gpios changes
|
2021-04-20 18:32:04 +02:00 |
|
nrf52dk_nrf52805
|
dts: nrf: revert i2c sda-gpios, scl-gpios changes
|
2021-04-20 18:32:04 +02:00 |
|
nrf52dk_nrf52810
|
dts: nrf: revert i2c sda-gpios, scl-gpios changes
|
2021-04-20 18:32:04 +02:00 |
|
nrf52dk_nrf52832
|
dts: nrf: revert i2c sda-gpios, scl-gpios changes
|
2021-04-20 18:32:04 +02:00 |
|
nrf5340dk_nrf5340
|
boards: add zephyr_udc0 nodelabel to all boards with USB support
|
2021-08-19 16:56:54 +02:00 |
|
nrf9160_innblue21
|
boards: rename nrf9160_innblue21ns
|
2021-09-20 05:57:24 -04:00 |
|
nrf9160_innblue22
|
boards: rename nrf9160_innblue22ns
|
2021-09-20 05:57:24 -04:00 |
|
nrf9160dk_nrf9160
|
boards: nrf: Enable pull-ups on UART pins in Nordic DKs
|
2021-08-06 19:17:26 -04:00 |
|
nrf9160dk_nrf52840
|
boards: nrf: Enable pull-ups on UART pins in Nordic DKs
|
2021-08-06 19:17:26 -04:00 |
|
nrf21540dk_nrf52840
|
boards: add zephyr_udc0 nodelabel to all boards with USB support
|
2021-08-19 16:56:54 +02:00 |
|
nrf52832_mdk
|
dts: nrf: revert i2c sda-gpios, scl-gpios changes
|
2021-04-20 18:32:04 +02:00 |
|
nrf52833dk_nrf52820
|
boards: add zephyr_udc0 nodelabel to all boards with USB support
|
2021-08-19 16:56:54 +02:00 |
|
nrf52833dk_nrf52833
|
boards: add zephyr_udc0 nodelabel to all boards with USB support
|
2021-08-19 16:56:54 +02:00 |
|
nrf52840_blip
|
boards: add zephyr_udc0 nodelabel to all boards with USB support
|
2021-08-19 16:56:54 +02:00 |
|
nrf52840_mdk
|
boards: add zephyr_udc0 nodelabel to all boards with USB support
|
2021-08-19 16:56:54 +02:00 |
|
nrf52840_papyr
|
boards: add zephyr_udc0 nodelabel to all boards with USB support
|
2021-08-19 16:56:54 +02:00 |
|
nrf52840dk_nrf52811
|
boards: nrf: Enable pull-ups on UART pins in Nordic DKs
|
2021-08-06 19:17:26 -04:00 |
|
nrf52840dk_nrf52840
|
boards: add zephyr_udc0 nodelabel to all boards with USB support
|
2021-08-19 16:56:54 +02:00 |
|
nrf52840dongle_nrf52840
|
drivers: console: remove unused CONSOLE selection
|
2021-09-28 12:13:23 +02:00 |
|
nucleo_f030r8
|
boards: arm: nucleo_f030r8: full Arduino SPI support
|
2021-06-29 11:32:15 -04:00 |
|
nucleo_f031k6
|
boards: nucleo_f031k6: Use dts for clocks configuration
|
2021-05-04 13:01:54 -05:00 |
|
nucleo_f070rb
|
boards: arm: nucleo_f070rb: full Arduino SPI support
|
2021-06-29 11:32:15 -04:00 |
|
nucleo_f091rc
|
boards: arm: nucleo_f091rc: DTS and Documentation updates
|
2021-07-29 11:48:23 -04:00 |
|
nucleo_f103rb
|
tests/drivers/uart: async_api: Enable test on nucleo_f103rb
|
2021-09-16 13:19:19 -04:00 |
|
nucleo_f207zg
|
boards: add zephyr_udc0 nodelabel to all boards with USB support
|
2021-08-19 16:56:54 +02:00 |
|
nucleo_f302r8
|
boards: arm: nucleo_f302r8: full Arduino SPI support
|
2021-06-29 11:32:15 -04:00 |
|
nucleo_f303k8
|
boards: arm: stm32: clean up dts after clock conversion
|
2021-05-12 08:35:03 -05:00 |
|
nucleo_f303re
|
boards: nucleo_f303re: Use dts for clocks configuration
|
2021-05-03 07:52:35 -05:00 |
|
nucleo_f334r8
|
boards: arm: nucleo_f334r8: full Arduino SPI support
|
2021-06-29 11:32:15 -04:00 |
|
nucleo_f401re
|
boards: arm: nucleo_f401re: full Arduino SPI support
|
2021-06-29 11:32:15 -04:00 |
|
nucleo_f410rb
|
boards: nucleo_f410rb: Use dts for clocks configuration
|
2021-05-04 13:10:46 -05:00 |
|
nucleo_f411re
|
boards: arm: stm32: clean up dts after clock conversion
|
2021-05-12 08:35:03 -05:00 |
|
nucleo_f412zg
|
boards: arm: stm32f412 boards change Kconfig
|
2021-10-07 15:38:22 -04:00 |
|
nucleo_f413zh
|
boards: add zephyr_udc0 nodelabel to all boards with USB support
|
2021-08-19 16:56:54 +02:00 |
|
nucleo_f429zi
|
boards: add zephyr_udc0 nodelabel to all boards with USB support
|
2021-08-19 16:56:54 +02:00 |
|
nucleo_f446re
|
boards: nucleo_f446re: Use dts for clocks configuration
|
2021-05-04 13:10:46 -05:00 |
|
nucleo_f446ze
|
board: Added board support package for Nucleo_F446ZE
|
2021-09-28 20:34:55 -04:00 |
|
nucleo_f746zg
|
boards: add zephyr_udc0 nodelabel to all boards with USB support
|
2021-08-19 16:56:54 +02:00 |
|
nucleo_f756zg
|
boards: add zephyr_udc0 nodelabel to all boards with USB support
|
2021-08-19 16:56:54 +02:00 |
|
nucleo_f767zi
|
boards: add zephyr_udc0 nodelabel to all boards with USB support
|
2021-08-19 16:56:54 +02:00 |
|
nucleo_g0b1re
|
boards: nucleo_g0b1re: Enable PM support
|
2021-09-03 09:42:09 -04:00 |
|
nucleo_g071rb
|
boards: nucleo_g071rb: Set openocd as default flash & debug i/f
|
2021-09-15 11:12:23 -04:00 |
|
nucleo_g431rb
|
boards: arm: nucleo_g431rb: fix Arduino SPI support
|
2021-06-29 11:32:15 -04:00 |
|
nucleo_g474re
|
boards: nucleo_g474re: Set openocd as default flash & debug i/f
|
2021-09-15 11:12:23 -04:00 |
|
nucleo_h723zg
|
boards: arm: nucleo_h723zg board enabling usart2
|
2021-08-20 06:28:32 -04:00 |
|
nucleo_h743zi
|
boards: add zephyr_udc0 nodelabel to all boards with USB support
|
2021-08-19 16:56:54 +02:00 |
|
nucleo_h745zi_q
|
boards: stm32: Update pwm nodes after change of default "st,prescaler"
|
2021-06-16 10:41:01 +02:00 |
|
nucleo_h753zi
|
boards: add zephyr_udc0 nodelabel to all boards with USB support
|
2021-08-19 16:56:54 +02:00 |
|
nucleo_l4r5zi
|
boards: remove USB option for STM32 based boards
|
2021-08-03 19:00:12 -04:00 |
|
nucleo_l011k4
|
boards: nucleo_l011k4: Use dts for clocks configuration
|
2021-04-30 12:42:42 -05:00 |
|
nucleo_l031k6
|
boards: nucleo_l031k6: Use dts for clocks configuration
|
2021-05-03 19:58:06 -04:00 |
|
nucleo_l053r8
|
boards: arm: stm32: clean up dts after clock conversion
|
2021-05-12 08:35:03 -05:00 |
|
nucleo_l073rz
|
boards: nucleo_l073rz: Set LSI as LPTIM clock source
|
2021-09-29 06:36:53 -04:00 |
|
nucleo_l152re
|
boards: arm: nucleo_l152re: DTS and Documentation updates
|
2021-07-29 11:48:23 -04:00 |
|
nucleo_l412rb_p
|
boards: arm: nucleo_l412rb_p: full Arduino SPI support
|
2021-06-29 11:32:15 -04:00 |
|
nucleo_l432kc
|
boards: nucleo_l432kc: Use dts for clocks configuration
|
2021-04-30 12:50:30 -05:00 |
|
nucleo_l433rc_p
|
boards: arm: nucleo_l433rc_p: add Arduino SPI support
|
2021-06-29 11:32:15 -04:00 |
|
nucleo_l452re
|
boards: arm: nucleo_l452re: full Arduino SPI support
|
2021-06-29 11:32:15 -04:00 |
|
nucleo_l476rg
|
boards: nucleo_l476rg and nucleo_wb55rg add timers
|
2021-08-13 07:33:09 -04:00 |
|
nucleo_l496zg
|
boards: arm: nucleo_l496zg: full Arduino SPI support
|
2021-06-29 11:32:15 -04:00 |
|
nucleo_l552ze_q
|
boards: stm: switch postbuild.sh script to a command from a byproduct
|
2021-07-28 19:38:35 +02:00 |
|
nucleo_u575zi_q
|
boards: stm32u5: Fix instructions to use openocd
|
2021-10-01 10:51:04 -04:00 |
|
nucleo_wb55rg
|
boards: nucleo_wb55rg: Give more flash space to M0 binary
|
2021-09-22 09:46:26 -04:00 |
|
nucleo_wl55jc
|
doc: stm32wl and stm32l5 boards: update supported features
|
2021-07-23 16:25:27 -04:00 |
|
nuvoton_pfm_m487
|
driver: serial: replace suffix nuvoton with numicro
|
2021-08-07 20:37:24 -04:00 |
|
olimex_stm32_e407
|
boards: add zephyr_udc0 nodelabel to all boards with USB support
|
2021-08-19 16:56:54 +02:00 |
|
olimex_stm32_h103
|
boards: stm32: Update pwm nodes after change of default "st,prescaler"
|
2021-06-16 10:41:01 +02:00 |
|
olimex_stm32_h407
|
boards: olimex_stm32_h407: Use dts for clocks configuration
|
2021-05-04 13:03:46 -05:00 |
|
olimex_stm32_p405
|
boards: olimex_stm32_p405: Use dts for clocks configuration
|
2021-05-04 13:03:46 -05:00 |
|
olimexino_stm32
|
boards: add zephyr_udc0 nodelabel to all boards with USB support
|
2021-08-19 16:56:54 +02:00 |
|
particle_argon
|
boards: add zephyr_udc0 nodelabel to all boards with USB support
|
2021-08-19 16:56:54 +02:00 |
|
particle_boron
|
boards: add zephyr_udc0 nodelabel to all boards with USB support
|
2021-08-19 16:56:54 +02:00 |
|
particle_xenon
|
boards: add zephyr_udc0 nodelabel to all boards with USB support
|
2021-08-19 16:56:54 +02:00 |
|
pico_pi_m4
|
boards: i.mx: Remove unneeded zephyr_include_directories
|
2021-03-23 13:41:05 -05:00 |
|
pinetime_devkit0
|
boards: pinetime_devkit0: adjust spi flash compatible
|
2021-08-17 17:51:57 -04:00 |
|
pinnacle_100_dvk
|
DTS: modem: HL7800: remove DTR binding
|
2021-09-20 12:24:40 -04:00 |
|
qemu_cortex_m0
|
boards: arm: qemu_cortex_m0: use LFXTAL
|
2021-04-29 14:50:35 +02:00 |
|
qemu_cortex_m3
|
arm: shrink names for null-pointer exception detection Kconfigs
|
2021-05-26 12:30:05 -05:00 |
|
qemu_cortex_r5
|
boards: qemu_cortex_r5: Disable compiling with thumb mode
|
2021-08-17 06:06:33 -04:00 |
|
quick_feather
|
drivers: fpga controller: add eos_s3 fpga driver
|
2021-09-03 09:54:00 -04:00 |
|
rak4631_nrf52840
|
boards: add zephyr_udc0 nodelabel to all boards with USB support
|
2021-08-19 16:56:54 +02:00 |
|
rak5010_nrf52840
|
boards: rak5010_nrf52840: remove wrong uart1 node compatible
|
2021-08-23 18:53:47 -04:00 |
|
rcar_h3ulcb
|
board: doc: Update H3ULCB doc for v2.7
|
2021-09-21 06:29:09 -04:00 |
|
reel_board
|
boards: add zephyr_udc0 nodelabel to all boards with USB support
|
2021-08-19 16:56:54 +02:00 |
|
ronoth_lodev
|
boards: arm: stm32: clean up dts after clock conversion
|
2021-05-12 08:35:03 -05:00 |
|
ruuvi_ruuvitag
|
runners: nrfjprog: boilerplate and recover rework
|
2020-12-09 15:00:24 -06:00 |
|
sam4e_xpro
|
boards: sam4e_xpro: add support for PHY driver
|
2021-08-27 11:43:48 -04:00 |
|
sam4l_ek
|
boards: arm: sam4l_ek: Enable USB device ctrl
|
2021-08-26 14:03:44 -04:00 |
|
sam4s_xplained
|
boards: arm: sam4: Enable bossac bootloader runner
|
2020-12-07 09:11:34 -06:00 |
|
sam_e70_xplained
|
boards: sam_e70_xplained: add support for PHY driver
|
2021-08-27 11:43:48 -04:00 |
|
sam_v71_xult
|
boards: sam_v71_xult: add support for PHY driver
|
2021-08-27 11:43:48 -04:00 |
|
seeeduino_xiao
|
boards: arm: sam0: Fix pinmux init prio
|
2021-08-30 09:31:56 -04:00 |
|
segger_trb_stm32f407
|
boards: segger_trb_stm32f407: Use dts for clocks configuration
|
2021-05-04 13:10:46 -05:00 |
|
sensortile_box
|
boards: add zephyr_udc0 nodelabel to all boards with USB support
|
2021-08-19 16:56:54 +02:00 |
|
serpente
|
boards: arm: sam0: Fix pinmux init prio
|
2021-08-30 09:31:56 -04:00 |
|
sparkfun_thing_plus_nrf9160
|
boards: rename sparkfun_thing_plus_nrf9160ns
|
2021-09-20 05:57:24 -04:00 |
|
steval_fcu001v1
|
boards: steval_fcu001v1: Use dts for clocks configuration
|
2021-05-04 13:10:46 -05:00 |
|
stm32_min_dev
|
board/STm32_Mini_dev_x_defconfig: ARM_MPU enabled without MPU.
|
2021-06-29 10:51:33 -04:00 |
|
stm32f0_disco
|
boards: stm32f0_disco: Use dts for clocks configuration
|
2021-05-04 13:01:54 -05:00 |
|
stm32f3_disco
|
boards: arm: stm32f303 disco DTS supports uart4
|
2021-09-28 19:56:52 -04:00 |
|
stm32f4_disco
|
boards: stm32f4_disco: Use dts for clocks configuration
|
2021-05-04 13:10:46 -05:00 |
|
stm32f030_demo
|
boards: stm32f030_demo: Use dts for clocks configuration
|
2021-05-04 13:01:54 -05:00 |
|
stm32f072_eval
|
boards: stm32f072_eval: Use dts for clocks configuration
|
2021-05-04 13:01:54 -05:00 |
|
stm32f072b_disco
|
boards: stm32f072b_disco: Use dts for clocks configuration
|
2021-05-04 13:01:54 -05:00 |
|
stm32f103_mini
|
boards: arm: Enable USB for stm32f103_mini board
|
2021-07-30 19:51:03 -04:00 |
|
stm32f411e_disco
|
boards: stm32: Update pwm nodes after change of default "st,prescaler"
|
2021-06-16 10:41:01 +02:00 |
|
stm32f412g_disco
|
boards: arm: stm32f412 boards change Kconfig
|
2021-10-07 15:38:22 -04:00 |
|
stm32f429i_disc1
|
boards: stm32f429i_disc1: add sdram support
|
2021-06-29 11:30:35 -04:00 |
|
stm32f469i_disco
|
boards: add zephyr_udc0 nodelabel to all boards with USB support
|
2021-08-19 16:56:54 +02:00 |
|
stm32f723e_disco
|
boards: add zephyr_udc0 nodelabel to all boards with USB support
|
2021-08-19 16:56:54 +02:00 |
|
stm32f746g_disco
|
boards: add zephyr_udc0 nodelabel to all boards with USB support
|
2021-08-19 16:56:54 +02:00 |
|
stm32f769i_disco
|
boards: arm: stm32f769i_disco: add Arduino SPI support
|
2021-06-29 11:32:15 -04:00 |
|
stm32g071b_disco
|
boards: stm32g071b_disco: Use dts for clocks configuration
|
2021-05-03 19:58:21 -04:00 |
|
stm32g0316_disco
|
boards: stm32g0316: use pinmux remap dts bindings
|
2021-10-07 15:38:53 -04:00 |
|
stm32h735g_disco
|
boards: arm: fix build of civetweb example for STM32H735G discovery kit
|
2021-07-09 07:45:07 -04:00 |
|
stm32h747i_disco
|
drivers: ipm: set IPM_STM32_HSEM default from the device tree
|
2021-08-30 09:33:32 -04:00 |
|
stm32l1_disco
|
boards: stm32l1_disco: Use dts for clocks configuration
|
2021-04-30 12:41:30 -05:00 |
|
stm32l476g_disco
|
boards: stm32l476g_disco: Use dts for clocks configuration
|
2021-04-30 12:50:30 -05:00 |
|
stm32l496g_disco
|
board/arm stm32: SDMMC support for stm32l496g_disco
|
2021-07-26 15:29:34 +02:00 |
|
stm32l562e_dk
|
usb: stm32l5: add usb_fs definition to devicetree
|
2021-10-13 06:15:58 -04:00 |
|
stm32mp157c_dk2
|
boards: stm32: Remove pinmux.c files
|
2020-11-03 11:11:04 +01:00 |
|
stm32vl_disco
|
boards: stm32: Update pwm nodes after change of default "st,prescaler"
|
2021-06-16 10:41:01 +02:00 |
|
stm3210c_eval
|
boards: stm3210c_eval: Use dts for clocks configuration
|
2021-05-04 13:02:26 -05:00 |
|
stm32373c_eval
|
boards: stm32373c_eval: Use dts for clocks configuration
|
2021-05-03 07:52:35 -05:00 |
|
teensy4
|
boards: add zephyr_udc0 nodelabel to all boards with USB support
|
2021-08-19 16:56:54 +02:00 |
|
thingy52_nrf52832
|
boards: thingy52_nrf52832: Update gpio-leds binding
|
2021-04-23 14:59:58 +02:00 |
|
thingy53_nrf5340
|
drivers: console: remove unused CONSOLE selection
|
2021-09-28 12:13:23 +02:00 |
|
twr_ke18f
|
boards: arm: nxp: Add pinctrl-names
|
2021-10-08 10:28:37 -05:00 |
|
twr_kv58f220m
|
boards: arm: nxp: Add pinctrl-names
|
2021-10-08 10:28:37 -05:00 |
|
ubx_bmd300eval_nrf52832
|
boards: u-blox: fix invalid compatibles
|
2021-05-19 22:18:25 -05:00 |
|
ubx_bmd330eval_nrf52810
|
boards: u-blox: fix invalid compatibles
|
2021-05-19 22:18:25 -05:00 |
|
ubx_bmd340eval_nrf52840
|
boards: add zephyr_udc0 nodelabel to all boards with USB support
|
2021-08-19 16:56:54 +02:00 |
|
ubx_bmd345eval_nrf52840
|
boards: add zephyr_udc0 nodelabel to all boards with USB support
|
2021-08-19 16:56:54 +02:00 |
|
ubx_bmd360eval_nrf52811
|
boards: u-blox: fix invalid compatibles
|
2021-05-19 22:18:25 -05:00 |
|
ubx_bmd380eval_nrf52840
|
boards: add zephyr_udc0 nodelabel to all boards with USB support
|
2021-08-19 16:56:54 +02:00 |
|
ubx_evkannab1_nrf52832
|
boards: arm: Add u-blox EVK-ANNA-B1
|
2021-04-22 11:07:35 +02:00 |
|
ubx_evkninab1_nrf52832
|
boards: arm: Add u-blox EVK-NINA-B1
|
2021-04-27 13:33:20 -04:00 |
|
ubx_evkninab3_nrf52840
|
boards: add zephyr_udc0 nodelabel to all boards with USB support
|
2021-08-19 16:56:54 +02:00 |
|
ubx_evkninab4_nrf52833
|
boards: add zephyr_udc0 nodelabel to all boards with USB support
|
2021-08-19 16:56:54 +02:00 |
|
udoo_neo_full_m4
|
boards: i.mx: Remove unneeded zephyr_include_directories
|
2021-03-23 13:41:05 -05:00 |
|
usb_kw24d512
|
boards: arm: nxp: Add pinctrl-names
|
2021-10-08 10:28:37 -05:00 |
|
v2m_beetle
|
boards: arm: correct documentation about SVC exception
|
2021-04-23 15:27:01 -05:00 |
|
v2m_musca_b1
|
boards: arm: v2m_musca_b1: Rename NS target
|
2021-07-10 12:44:02 -04:00 |
|
v2m_musca_s1
|
boards: arm: v2m_musca_s1: Rename NS target
|
2021-07-10 12:44:02 -04:00 |
|
warp7_m4
|
boards: i.mx: Remove unneeded zephyr_include_directories
|
2021-03-23 13:41:05 -05:00 |
|
waveshare_open103z
|
boards: add zephyr_udc0 nodelabel to all boards with USB support
|
2021-08-19 16:56:54 +02:00 |
|
xmc45_relax_kit
|
boards: arm: xmc45_relax_kit: minor doc fixes
|
2020-06-02 15:14:45 +02:00 |
|
index.rst
|
doc: fix sidebar nav issues with board docs
|
2017-06-27 19:21:29 -04:00 |
a8c4abdcf0