patrick/zephyr
1
0
Fork 0
Code Issues Pull requests Actions 8 Packages Projects Releases Wiki Activity
zephyr/drivers/serial
History
Manojkumar Subramaniam d79d26f1ae drivers: serial: stm32: renable IT RXNE as part of graceful disable 
async_rx_disable does not re-anable RXNE interrupt, it was disabled
during async_rx_enable

Signed-off-by: Manojkumar Subramaniam <manoj@electrolance.com>
2021-10-05 19:19:16 -04:00
..
CMakeLists.txt Microchip: MEC172x: Add UART driver 2021-08-09 16:21:33 -04:00
Kconfig Microchip: MEC172x: Add UART driver 2021-08-09 16:21:33 -04:00
Kconfig.altera_jtag drivers: uart_altera_jtag_hal: use DEVICE_DT_INST_DEFINE() 2021-08-23 18:53:47 -04:00
Kconfig.apbuart serial: apbuart interrupt support 2020-11-13 14:53:55 -08:00
Kconfig.b91 drivers: serial: introduce new Telink B91 Serial driver 2021-07-21 05:37:12 -04:00
Kconfig.cc13xx_cc26xx drivers: cc13xx_cc26xx: use DT_INST_FOREACH to reduce code duplication 2020-04-23 17:29:53 -05:00
Kconfig.cc32xx kconfig: Turn pointless/confusing 'menuconfig's into 'config's 2019-10-22 13:53:06 -05:00
Kconfig.cmsdk_apb kconfig: Clean up header comments and make them consistent 2019-11-04 17:31:27 -05:00
Kconfig.esp32 kconfig: Turn pointless/confusing 'menuconfig's into 'config's 2019-10-22 13:53:06 -05:00
Kconfig.esp32c3_rom drivers: serial: added minimal uart driver for esp32c3 2021-08-03 11:20:06 -05:00
Kconfig.esp32s2_rom esp32s2: drivers: serial: add minimal uart driver 2021-08-09 13:03:14 -04:00
Kconfig.gecko kconfig: Clean up header comments and make them consistent 2019-11-04 17:31:27 -05:00
Kconfig.imx drivers: serial: uart_imx: Convert driver to new DT_INST macros 2020-04-04 09:34:00 -05:00
Kconfig.leuart_gecko kconfig: Clean up header comments and make them consistent 2019-11-04 17:31:27 -05:00
Kconfig.litex kconfig: Clean up header comments and make them consistent 2019-11-04 17:31:27 -05:00
Kconfig.lpc11u6x drivers: serial: Add support for LPC11U6X UART controllers 2020-07-29 20:12:24 +02:00
Kconfig.mcux drivers: serial: uart_mcux: Convert to DT_INST 2020-04-14 17:52:31 -05:00
Kconfig.mcux_flexcomm drivers: uart: mcux_flexcomm: Convert to DT_INST 2020-04-28 16:54:30 -05:00
Kconfig.mcux_iuart drivers: serial: Add NXP IUART driver 2020-08-14 14:51:50 -05:00
Kconfig.mcux_lpsci drivers: uart: mcux_lpsci: Convert to DT_INST 2020-04-28 16:54:30 -05:00
Kconfig.mcux_lpuart drivers: uart: mcux_lpuart: Convert to DT_INST 2020-04-20 15:50:45 -05:00
Kconfig.miv drivers: serial: uart_miv: Fix build errors 2021-05-10 13:15:50 -05:00
Kconfig.msp432p4xx kconfig: Turn pointless/confusing 'menuconfig's into 'config's 2019-10-22 13:53:06 -05:00
Kconfig.native_posix drivers: serial: native_posix: Convert 2nd UART to be devicetree based 2021-02-18 09:06:21 +01:00
Kconfig.npcx driver: npcx7: fixed typo in Kconfig.npcx files. 2020-12-07 12:11:17 -05:00
Kconfig.nrfx drivers: serial: nrf_uarte: Conditionally call PPI driver 2021-05-07 12:11:32 +02:00
Kconfig.ns16550 uart: ns16550: add workaround to re-enable interrupts in ISR 2021-10-04 20:49:13 -04:00
Kconfig.numicro driver: serial: replace suffix nuvoton with numicro 2021-08-07 20:37:24 -04:00
Kconfig.pl011 drivers: pl011: add SBSA mode 2021-01-24 13:59:55 -05:00
Kconfig.psoc6 drivers: serial: psoc6: Add interrupts support 2021-04-27 09:27:45 -05:00
Kconfig.rcar drivers: uart: Add "Interrupt driven" to R-Car 2021-07-13 09:42:22 -04:00
Kconfig.rtt tracing: fix conflict with RTT locking 2021-05-25 07:36:38 -05:00
Kconfig.rv32m1_lpuart kconfig: Clean up header comments and make them consistent 2019-11-04 17:31:27 -05:00
Kconfig.sam0 kconfig: Clean up header comments and make them consistent 2019-11-04 17:31:27 -05:00
Kconfig.sifive drivers: serial: sifive: support SiFive Freedom series SoCs 2021-09-03 09:52:26 -04:00
Kconfig.stellaris arm: Removed support for CC2650 2020-01-18 09:27:55 -06:00
Kconfig.stm32 drivers: dma: stm32 dma driver for a new dma version 2021-07-22 04:52:53 -04:00
Kconfig.test drivers: serial: add a dummy driver for vnd,serial 2021-07-14 11:10:08 -05:00
Kconfig.uart_sam drivers: serial: uart_sam: rework device tree support 2020-04-18 17:04:08 -05:00
Kconfig.usart_sam drivers: serial: usart_sam: rework device tree support 2020-04-18 17:04:08 -05:00
Kconfig.xec Microchip: MEC172x: Add UART driver 2021-08-09 16:21:33 -04:00
Kconfig.xlnx drivers: serial: add driver for the Xilinx UART Lite IP 2020-08-14 13:35:39 -05:00
Kconfig.xmc4xxx drivers: serial: add XMC seris UART support 2020-05-09 14:21:44 +02:00
leuart_gecko.c drivers: serial: remove usage of device_pm_control_nop 2021-04-28 12:25:39 -04:00
serial_test.c drivers: serial: add a dummy driver for vnd,serial 2021-07-14 11:10:08 -05:00
uart_altera_jtag_hal.c drivers: uart_altera_jtag_hal: use DEVICE_DT_INST_DEFINE() 2021-08-23 18:53:47 -04:00
uart_apbuart.c serial: introduce CONFIG_UART_USE_RUNTIME_CONFIGURE 2021-06-07 12:09:01 +02:00
uart_b91.c drivers: serial: b91: full duplex mode support 2021-08-20 06:23:24 -04:00
uart_cc13xx_cc26xx.c pm: use actions for device PM control 2021-08-04 08:23:01 -04:00
uart_cc32xx.c drivers: serial: remove usage of device_pm_control_nop 2021-04-28 12:25:39 -04:00
uart_cmsdk_apb.c drivers: serial: remove usage of device_pm_control_nop 2021-04-28 12:25:39 -04:00
uart_esp32.c esp32: drivers: interrupt_controller: review UART interrupt usage 2021-07-16 07:19:28 -04:00
uart_gecko.c drivers: serial: gecko: add hw flow control support for EFR32 Series 2 2021-09-28 11:39:02 +02:00
uart_handlers.c device: Const-ify all device driver instance pointers 2020-09-02 13:48:13 +02:00
uart_imx.c drivers: serial: remove usage of device_pm_control_nop 2021-04-28 12:25:39 -04:00
uart_liteuart.c drivers: serial: remove usage of device_pm_control_nop 2021-04-28 12:25:39 -04:00
uart_lpc11u6x.c serial: introduce CONFIG_UART_USE_RUNTIME_CONFIGURE 2021-06-07 12:09:01 +02:00
uart_lpc11u6x.h device: Const-ify all device driver instance pointers 2020-09-02 13:48:13 +02:00
uart_mchp_xec.c Microchip: MEC172x: Add UART driver 2021-08-09 16:21:33 -04:00
uart_mcux.c serial: introduce CONFIG_UART_USE_RUNTIME_CONFIGURE 2021-06-07 12:09:01 +02:00
uart_mcux_flexcomm.c driver/uart: add enum parity element on devicetree bindings 2021-06-11 08:53:10 -05:00
uart_mcux_iuart.c drivers: serial: remove usage of device_pm_control_nop 2021-04-28 12:25:39 -04:00
uart_mcux_lpsci.c drivers: serial: remove usage of device_pm_control_nop 2021-04-28 12:25:39 -04:00
uart_mcux_lpuart.c drivers: serial: NXP: Enable flow control for uart_mcux_lpuart 2021-08-12 14:49:09 -05:00
uart_miv.c drivers: serial: uart_miv: Fix build errors 2021-05-10 13:15:50 -05:00
uart_msp432p4xx.c drivers: serial: remove usage of device_pm_control_nop 2021-04-28 12:25:39 -04:00
uart_native_posix.c drivers: Fix missing auto_attach_cmd 2021-06-09 16:18:17 +02:00
uart_npcx.c pm: use actions for device PM control 2021-08-04 08:23:01 -04:00
uart_nrfx_uart.c drivers: serial: nrf: Make pull-ups on UART pins configurable 2021-08-06 19:17:26 -04:00
uart_nrfx_uarte.c drivers: serial: nrf: Make pull-ups on UART pins configurable 2021-08-06 19:17:26 -04:00
uart_ns16550.c uart: ns16550: add workaround to re-enable interrupts in ISR 2021-10-04 20:49:13 -04:00
uart_ns16550.h drivers: serial: ns16550: move header from /include/ 2019-06-25 15:27:00 -04:00
uart_numicro.c driver: serial: replace suffix nuvoton with numicro 2021-08-07 20:37:24 -04:00
uart_pl011.c drivers: serial: remove usage of device_pm_control_nop 2021-04-28 12:25:39 -04:00
uart_psoc6.c drivers: serial: remove usage of device_pm_control_nop 2021-04-28 12:25:39 -04:00
uart_rcar.c drivers: uart: Add "Interrupt driven" to R-Car 2021-07-13 09:42:22 -04:00
uart_rom_esp32c3.c drivers: serial: added minimal uart driver for esp32c3 2021-08-03 11:20:06 -05:00
uart_rom_esp32s2.c esp32s2: drivers: serial: add minimal uart driver 2021-08-09 13:03:14 -04:00
uart_rtt.c drivers: serial: remove usage of device_pm_control_nop 2021-04-28 12:25:39 -04:00
uart_rv32m1_lpuart.c drivers: serial: remove usage of device_pm_control_nop 2021-04-28 12:25:39 -04:00
uart_sam.c soc: atmel_sam: Add _INST to ATMEL_SAM_DT_PIN* macros 2021-06-14 09:50:41 -05:00
uart_sam0.c drivers: serial: uart_sam0: Fix async tx done event triggering to early. 2021-09-19 19:31:25 -04:00
uart_sifive.c drivers: serial: remove usage of device_pm_control_nop 2021-04-28 12:25:39 -04:00
uart_stellaris.c drivers: serial: remove usage of device_pm_control_nop 2021-04-28 12:25:39 -04:00
uart_stm32.c drivers: serial: stm32: renable IT RXNE as part of graceful disable 2021-10-05 19:19:16 -04:00
uart_stm32.h drivers/uart: stm32: Fix pm_constraint handling 2021-09-21 10:47:56 -04:00
uart_xlnx_ps.c serial: introduce CONFIG_UART_USE_RUNTIME_CONFIGURE 2021-06-07 12:09:01 +02:00
uart_xlnx_uartlite.c drivers: serial: remove usage of device_pm_control_nop 2021-04-28 12:25:39 -04:00
uart_xmc4xxx.c drivers: serial: remove usage of device_pm_control_nop 2021-04-28 12:25:39 -04:00
usart_sam.c soc: atmel_sam: Add _INST to ATMEL_SAM_DT_PIN* macros 2021-06-14 09:50:41 -05:00