Add pin control group for UHS modes for H3ULCB, Salvator XS M3
boards to appropriate dts files. Both 'uhs' and 'default' pins
states have the same properties for eMMC, e.g. 1.8V.
Signed-off-by: Mykola Kvach <mykola_kvach@epam.com>
The DCCM configuration was set inconsistently between nsim and
mdb arguments
Signed-off-by: Evgeniy Paltsev <PaltsevEvgeniy@gmail.com>
Signed-off-by: Eugeniy Paltsev <Eugeniy.Paltsev@synopsys.com>
After recent HWv2 model there is defconfig file
missing, so we got incorrect platform configuration. Fix that.
Signed-off-by: Eugeniy Paltsev <Eugeniy.Paltsev@synopsys.com>
Signed-off-by: Evgeniy Paltsev <PaltsevEvgeniy@gmail.com>
Add a shield definition for the MikroElektronika Weather Click board.
The Weather Click board features the BME280 sensor, a combined humidity,
pressure, and temperature sensor from Bosch Sensortec.
This shield can be used with any board equipped with a mikroBUS socket
that provides a `mikrobus_i2c` devicetree node label.
Signed-off-by: Chris Wilson <chris@cgnd.dev>
Added code partitioning for ST Nucleo G431RB and G474RE boards.
Defined flash partitions including "mcuboot," "image-0," and "image-1".
Signed-off-by: Hudson C. Dalpra <dalpra.hcd@gmail.com>
The ip_k66f now supports its KSZ8794CNX switch IC via DSA subsystem.
With the samples/net/dsa it is possible to handle LLDP frames on this
board.
Signed-off-by: Lukasz Majewski <lukma@denx.de>
qemu_malta//be -> qemu_malta/qemu_malta/be
This caused the board not to work with Twister.
Signed-off-by: Øyvind Rønningstad <oyvind.ronningstad@nordicsemi.no>
USB_NATIVE_POSIX dependencies were partially broken for
native_sim as the option was duplicated in the boards
defconfigas.
Let's not define it also in the board Kconfig.defconfig
but instead default it to y in its main definition if
building for either native_posix[//64] or native_sim[//64]
Signed-off-by: Alberto Escolar Piedras <alberto.escolar.piedras@nordicsemi.no>
Instead of having the boards override the default
in their Kconfig.defconfig
let's just default to IMMEDIATE logging mode in the main
definition if we are building for a ARCH POSIX board.
This avoid issues w dependencies being lost if not duplicated
correctly.
Signed-off-by: Alberto Escolar Piedras <alberto.escolar.piedras@nordicsemi.no>
The EEPROM_SIMULATOR already defaults to 'y' with proper
dependencies in its main definition in drivers/eeprom/Kconfig.
Let's not define it also in the board Kconfig.defconfig
as that causes dependencies to be lost if not duplicated
correctly.
Signed-off-by: Alberto Escolar Piedras <alberto.escolar.piedras@nordicsemi.no>
The FLASH_SIMULATOR already defaults to 'y' with proper
dependencies in its main definition in drivers/flash/Kconfig.
Let's not define it also in the board Kconfig.defconfig
as that causes dependencies to be lost if not duplicated
correctly.
Signed-off-by: Alberto Escolar Piedras <alberto.escolar.piedras@nordicsemi.no>
Switch the default MCUBoot FW Update mode from Swap & Scratch
to more preferable Swap & Move for the rest of NXP boards.
Delete the scratch partition. Save RAM & ROM.
Slot 0 has one additional sector, for use with
the swap move algorithm.
Signed-off-by: Andrej Butok <andrey.butok@nxp.com>
Enable serial communication through UART port between HDMI ports.
Signed-off-by: Myeonghyeon Park <myeonghyeon@tsnlab.com>
Signed-off-by: Junho Lee <junho@tsnlab.com>
Add support for Raspberry Pi 5.
Currently only internal GPIO(gio_aon) is supported.
'Blinky' is the only sample that is working for now.
Signed-off-by: Junho Lee <junho@tsnlab.com>
Add support for the Waveshare ESP32-S3-Touch-LCD-1.28 board, including
support the LCD and touchscreen controllers. Tested with samples
already available.
Signed-off-by: Joel Guittet <joelguittet@gmail.com>
The MEMC driver in memc_mcux_flexspi.c is initialized
before the FlexSPI driver (flash_mcux_flexspi_nor.c)
and hangs during FlexSPI init. Initialize the FlexSPI
clock to 50MHz before the speed is set to the optimum
speed by the FlexSPI driver.
Signed-off-by: Mahesh Mahadevan <mahesh.mahadevan@nxp.com>
Add PHYTEC's phyBOARD-Electra kit with the phyCORE-AM64x
System on Module (SOM).
This board only supports the M4F core, UART and GPIO right now,
since other drivers are still missing.
Signed-off-by: Daniel Schultz <d.schultz@phytec.de>
Configure SDMMC port on stm32h573i_dk.
Disable SDMMC clock check as using 48MHz is not strictly required.
Signed-off-by: Erwan Gouriou <erwan.gouriou@st.com>
Added DTS of PDK's mx25r64 flash memory.
Memory is described under spi00 peripheral and
can be controlled used flash spi_nor driver.
Signed-off-by: Andrzej Puzdrowski <andrzej.puzdrowski@nordicsemi.no>
Updated the frdm_mcxn947 with support for the
CTimer counter.
Signed-off-by: William Tang <william.tang@nxp.com>
Signed-off-by: Emilio Benavente <emilio.benavente@nxp.com>
After moving to HWMv2 em_starterkit_emsk_em11d_defconfig file was omitted.
Some of tests for the emks_em11d platform became broken.
This PR fixes https://github.com/zephyrproject-rtos/zephyr/issues/71753
Signed-off-by: Nikolay Agishev <agishev@synopsys.com>
There are several esp32-based boards that its conf and overlay
files are missing proper renaming to match cpu cluster.
This also removes all _SOC_ name from files.
Signed-off-by: Sylvio Alves <sylvio.alves@espressif.com>
The STM32L152C-DISCOVERY is a development board based on the STM32L152RC
MCU. It is very similar to the stm32l1_disco, which was used as a
reference for the pinmux and defconfig.
stm32l152c_disco board has 256 Kbytes of flash memory, 32 Kbytes of RAM
and 8 Kbytes of data EEPROM.
Signed-off-by: Maxin John <maxin.john@gmail.com>
Fixes warnings when building documentation due to additional SoC
names being part of the Kconfig symbols which they should not be
Signed-off-by: Jamie McCrae <jamie.mccrae@nordicsemi.no>
UBSAN reports a bogus error in this function:
"load of address x with insufficient space for an
object of type '<unknown> *'"
as it seems unable to determine the size of
test_installers.
Let's disable this check in this function.
Signed-off-by: Alberto Escolar Piedras <alberto.escolar.piedras@nordicsemi.no>
`board.cmake` specified runner arguments only for the RAM-based variant,
use SOC config to support both:
`CONFIG_BOARD_NRF54L15PDK_NRF54L15_CPUFLPR` and
`CONFIG_BOARD_NRF54L15PDK_NRF54L15_CPUFLPR_XIP`.
Also align ARM target so it looks nice.
Signed-off-by: Marcin Szymczyk <marcin.szymczyk@nordicsemi.no>
This patch is to fix issue #71473.
The commit 0be0d2175b revert some change
introduced by hwmv2 which allows defconfig can be overlay, so revert
back defconfig to be full configure files which includes all items used
by the board variants.
Signed-off-by: Jiafei Pan <Jiafei.Pan@nxp.com>
FTM internal counter can be clocked by one of three clock sources
independent of the module bus clock. This patch introduces a DT property
to perform the clock selection from DT.
DT sources are updated to keep the current clock selection for all boards,
with exception of ucans32k1sic board which is migrated to use system
clock by default, as this seems to be a better choice for most cases.
Some PWM LED samples require slower clock so overlays are added for
those cases.
Signed-off-by: Manuel Argüelles <manuel.arguelles@nxp.com>
Add default configuration related to BLE protocol,
for Application and Radio core on nRF54h20 platform.
Signed-off-by: Kamil Gawor <Kamil.Gawor@nordicsemi.no>
Convert all of the NXP SOCs with ENET to use the new
binding scheme, which is used by the new driver.
Convert any boards using this SOC to the new scheme as well,
and remove from the documentation the bit about the experimental
nature of the new driver and the overlay that shall no longer exist.
Some of the boards I do not have the hardware of, so apologies
if something breaks, as I have no way to know. All the boards
were made sure to at least build.
Signed-off-by: Declan Snyder <declan.snyder@nxp.com>
