This commit removes the `Kconfig.core` file. It's been largely unused, and
the only symbol it provides (`RISCV_CORE_E31`) overlaps with the SoC-layer
provided `SOC_SERIES_SIFIVE_FREEDOM_FE300`.
As of date, the only SoC that uses the E31 core in Zephyr is the FE310 SoC.
Signed-off-by: Filip Kokosinski <fkokosinski@antmicro.com>
Add support for the RD RW612 BGA board for the adafruit_2_8_tft_touch_v2
shield. This board uses a custom LCDIC MIPI DBI controller, which
requires a specific board overlay to enable the shield.
Signed-off-by: Daniel DeGrasse <daniel.degrasse@nxp.com>
Enable support for LCDIC on rd_rw612_bga. This support also enables
acceleration features such as DMA for LVGL, to improve performance
Signed-off-by: Daniel DeGrasse <daniel.degrasse@nxp.com>
Add pinctrl and board enablement for LPUART2, which is broken out to
P4_2 and P4_3 on the FRDM board.
Signed-off-by: Daniel DeGrasse <daniel.degrasse@nxp.com>
Automatically select CONFIG_GPIO when the GPIO-controlled CAN transceiver
driver is enabled. Update board configurations to benefit from this.
Signed-off-by: Henrik Brix Andersen <hebad@vestas.com>
Add pa variant definition to board.yml
Add bl654_dvk_nrf52840_pa files dts, yaml, defconfig
Update doc with information on variant and regulatory information
Signed-off-by: Jate Sujjavanich <jatedev@gmail.com>
Add SWD debugger support for this board. Although there is not a debug
header, the SWD pins are accessible and the adaptor is not that difficult
to wire up. This will allow for debugging beyond just flashing, that the
UF2 programming setup allows for.
Signed-off-by: David Brown <david.brown@linaro.org>
In preparation for adding AMP support for i.MX RT6xx family we need
to rename existing cm33 support files to more specific names.
e.g mimxrt685_evk.dts -> mimxrt685_evk_mimxrt685s_cm33.dts
This will allow us to later add support for Cadence DSP found on i.MX
RT6xx series.
Signed-off-by: Daniel Baluta <daniel.baluta@nxp.com>
imxrt6xx are dual core devices featuring an ARM Cortex-M33
core and an Cadence Xtensa HIFI4 Audio DSP.
Currently only m33 core is supported. In order to support
the Cadence DSP we need first to do some code-reorganization
for m33.
We start by moving all cm33 related code to its own directory
and introduce the cpuclusters property in soc.yml file.
Signed-off-by: Daniel Baluta <daniel.baluta@nxp.com>
Fixs USDHC by setting PWR and CD gpio's correctly.
Adds missing button from the GPS module.
Co-authored-by: Peter van der Perk <peter.vanderperk@nxp.com>
Signed-off-by: Benjamin Perseghetti <bperseghetti@rudislabs.com>
There was missing storage partition that is required for setting
subsytem. Add missing entries to board files.
Signed-off-by: Piotr Pryga <piotr.pryga@nordicsemi.no>
There are default configs that are provided by default for
e.g. nRF5340dk to enable HCI IPC communication type for
application domain and enable BT controller for radio domain.
These configs were missing for nRF54h20 DK.
Signed-off-by: Piotr Pryga <piotr.pryga@nordicsemi.no>
Explain the different versions of the MB1166 shield and
remove note about that version A09 is not supported
Signed-off-by: Erik Andersson <erian747@gmail.com>
Add support for the A09 version of MB1166 which
have a NT35510 panel controller instead of an
OTM8009a as in prior versions
Fixes#60888
Signed-off-by: Erik Andersson <erian747@gmail.com>
This commit enables PMP on the default revision of the SiFive HiFive1
board. PMP was already enabled on the Rev B of this board.
Signed-off-by: Filip Kokosinski <fkokosinski@antmicro.com>
Add pinctrl for SAI1 node. This means:
1) Adding definitions for the pads used by SAI1.
2) Creating a pin group and referencing it in
the SAI1 node via the `pinctrl-0` property.
Signed-off-by: Laurentiu Mihalcea <laurentiu.mihalcea@nxp.com>
Add pinctrl for SAI1 node. This means:
1) Adding definitions for the pads used by SAI1.
2) Creating a pin group and referencing it in the
SAI1 node via the `pinctrl-0` property.
Signed-off-by: Laurentiu Mihalcea <laurentiu.mihalcea@nxp.com>
On the RT1170-EVKB, the framebuffer displays incorrectly
(shifted by about 1/4 of the screen width). This is because
pixelclk-active was set to 1 (which corresponds to
kELCDIF_DriveDataOnRisingClkEdge).
According to the RM68200 datasheet, the DSI transfert begins at
the uprising pixel clock and stop at the falling pixel clock. So,
pixelclk-active needs to be set to 0 (which corresponds to
kELCDIF_DriveDataOnFallingClkEdge).
Signed-off-by: Trung Hieu Le <trunghieu.le@nxp.com>
On the RT1170-EVKB, the framebuffer displays incorrectly
(shifted by about 1/4 of the screen width). This is because
pixelclk-active was set to 1 (which corresponds to
kELCDIF_DriveDataOnRisingClkEdge).
According to the HX8394 datasheet, the DSI transfert begins at
the uprising pixel clock and stop at the falling pixel clock. So,
pixelclk-active needs to be set to 0 (which corresponds to
kELCDIF_DriveDataOnFallingClkEdge).
Signed-off-by: Trung Hieu Le <trunghieu.le@nxp.com>
Enable clock control for i.MX8ULP. This consists of:
1) Adding a PCC node in the DTS
2) Adding a header file containing the definitions
of the clocks used by the peripherals to be enabled.
Signed-off-by: Laurentiu Mihalcea <laurentiu.mihalcea@nxp.com>
Adds the device trees, Kconfig, and documentation files.
The following features have been confirmed working on hardware:
* LED
* Button
* ST7735 TFT-LCD
* External QuadSPI NOR Flash memory
* External SPI NOR Flash memory
* USB CDC ACM
* microSD card
Signed-off-by: Charles Dias <charlesdias.cd@outlook.com>
Change, for audio DSP and M7 cores, SOC_<name> to match
the exact soc name.
Update the board files accordingly.
These configs are used in SOF and NXP_HAL, so change
sha for these modules.
Signed-off-by: Iuliana Prodan <iuliana.prodan@nxp.com>
Adds a devicetree alias to the ambient temperature sensor on
adi_eval_adin1110ebz to support the thermometer sensor sample
application.
Signed-off-by: Maureen Helm <maureen.helm@analog.com>
Source code of board/m5stack/m5stickc_plus and
board/m5stack/m5stack_atoms3_lite were adapted for an inital
support of the M5Stack ATOM Lite board.
Signed-off-by: Nikola Trifunovic <nikola@trifunovic.at>
In future versions of Linkserver, specifying the core argument within
the device string will not be supported. Therefore, move the FRDM
MCXN947 board to specify the core directly instead of using the device
string.
Signed-off-by: Daniel DeGrasse <daniel.degrasse@nxp.com>
- fix schematic link pointing to different board
- fix link to the board_defconfig file
- remove the "Debug Firmware" link that was not referenced anywhere
- add a link to the board user manual
- minor additions to the debug with J-Link section
Signed-off-by: Thomas Stranger <thomas.stranger@outlook.com>
Create regulator on GPIO for microphone supply
Set pdm data and clk pins in pinctrl
Add xiao_ble_sense overlay for dmic sample support
Signed-off-by: Zak Portnoy <zakportnoy@gmail.com>
Enable DMIC on RW612 BGA board. The DMIC is enabled for both onboard
MEMS microphones for this board, and the board is enabled with the DMIC
sample and test
Signed-off-by: Daniel DeGrasse <daniel.degrasse@nxp.com>
Set the PLL1_Q divider to 6 give a can core clock of 80MHz to
resolve fdcan_clk reception problem because M_CAN requires that
the host clock "APB1" should be higher or equal to the CAN core
clock "PLL1_Q".
Signed-off-by: IBEN EL HADJ MESSAOUD Marwa <marwa.ibenelhadjmessaoud-ext@st.com>
Add necessary overlay and stm32h573i_dk in i2c_target_api test case
to enable the board.
Signed-off-by: IBEN EL HADJ MESSAOUD Marwa <marwa.ibenelhadjmessaoud-ext@st.com>
The SOC name for the `imx8ulp_evk` board has been changed
to `mimx8ud7`. As such, update `deprecated.cmake` to reflect
this change.
Signed-off-by: Laurentiu Mihalcea <laurentiu.mihalcea@nxp.com>
The SOC name `imx8ulp` has been just a placeholder until
support for the SOC's ADSP (since this is the only core
that's supported in Zephyr) could be added to the NXP HAL.
Now that the support has been added, to make use of it, the
SOC name `imx8ulp` has to be changed to `mimx8ud7`. As such,
this commit does the following:
1) Introduces SOC part number configuration - needed
by some HAL headers.
2) Replaces all occurrences of `imx8ulp` (as the SOC
name) with `mimx8ud7`.
3) Enables `CONFIG_HAS_MCUX`.
4) Aligns all `CONFIG_SOC_` configurations with the
new SOC name.
5) Updates SOF hash. This is needed to fix build issues
caused by this name change. This is not done in a separate
commit to preserve bisectability.
Signed-off-by: Laurentiu Mihalcea <laurentiu.mihalcea@nxp.com>
This commit should fix configuration conflicts that
came up upon merging both MIPI DBI and display panel
drivers.
1. Board's display/LVGL Kconfigs should be enabled when
needed based on the selected display interface.
2. Overwrite the touch controller's I2C pins to avoid
conflicts with the display panel signals.
Signed-off-by: Ioannis Karachalios <ioannis.karachalios.px@renesas.com>
To use this functionality one must now use the native_sim//64
(variant) version. The old hwmv1 compatible name for the board
was left provisionally while all tests in tree were ported.
That being now done, this old name can be removed.
After this change one cannot build anymore
targeting native_sim_64, but must instead build
targeting native_sim/[native]/64.
For twister tests the old name is already not valid.
Signed-off-by: Alberto Escolar Piedras <alberto.escolar.piedras@nordicsemi.no>
To use this functionality one must now use the native_posix//64
(variant) version. The old hwmv1 compatible name for the board
was left provisionally while all tests in tree were ported.
That being now done, this old name can be removed.
After this change one cannot build anymore
targeting native_posix_64, but must instead build
targeting native_posix/[native]/64.
For twister tests the old name is already not valid.
Signed-off-by: Alberto Escolar Piedras <alberto.escolar.piedras@nordicsemi.no>
Add devicetree node for the accompanying, ssd1306-based display board
connected to connector P4.
Signed-off-by: Henrik Brix Andersen <henrik@brixandersen.dk>
Correct a few issues with the documentation that were causing rendering
issues, as well as the following changes:
- added blurb to debug section clarifying that the default debugger
firmware supports LinkServer
- updated serial terminal output with board name given when building
with HWMv2
Signed-off-by: Daniel DeGrasse <daniel.degrasse@nxp.com>
By default, LinkServer's memory map for the MCXN947 does not define
memory regions for the SRAM or peripheral bus in secure mode. This
results in gdb failing to read from these memory regions unless
explicitly told ignore the debugger memory map via
"set mem inaccessible-by-default off".
To resolve this, define memory regions for SRAM and peripherals in
secure mode via the commandline arguments passed to LinkServer in
board.cmake.
Signed-off-by: Daniel DeGrasse <daniel.degrasse@nxp.com>
To use this functionality one must now use the hwmv2 naming
(nrf5340bsim/nrf5340/cpu{app,net}).
The old hwmv1 compatible names for these targets,
were left provisionally while all tests in tree were ported.
That being now done, these old names can be removed.
After this change one cannot build anymore
targeting nrf5340bsim_nrf5340_cpu{app,net}
but must instead build targeting
nrf5340bsim/nrf5340/cpu{app,net}
For twister tests the old name were already not valid.
Signed-off-by: Alberto Escolar Piedras <alberto.escolar.piedras@nordicsemi.no>
This patch fixes a broken link in the docs for the
nrf9151dk.
It points to the SiP's product page for now.
Signed-off-by: Maximilian Deubel <maximilian.deubel@nordicsemi.no>
Update Kconfig to improve LVGL Demo performance.
- enable ICache, DCache, and cache management.
- enable Chrom-ART.
- enable double frame buffer and full refresh.
- set bits per pixel to 16.
Signed-off-by: Charles Dias <charlesdias.cd@outlook.com>
Sphinx reference used cypress instead of infineon. This causes build
warnings, as the same tag is part of boards/cypress/index.rst.
Signed-off-by: Gerard Marull-Paretas <gerard@teslabs.com>
The SparkFun Pro Micro RP2040 board has an WS2812-style RGB LED connected
to a GPIO pin. Add this to the devicetree so that this device can be used.
Signed-off-by: David Brown <david.brown@linaro.org>
Document offloaded sockets driver, which is an alternative to Ethernet
driver for networking applications.
Signed-off-by: Marcin Niestroj <m.niestroj@emb.dev>
Co-authored-by: Alberto Escolar Piedras <alberto.escolar.piedras@nordicsemi.no>
Use NSI_HW_EVENT() in order to periodically check for events in host
sockets. Whenever there is a socket event ready to be processed by Zephyr,
raise native_sim (newly introduced) CPU interrupt, so that Zephyr driver
can signal readiness with k_poll().
Maintain a list of Zephyr poll() executions in Zephyr context. Iterate
through them whenever there is some event to be processed.
Signed-off-by: Marcin Niestroj <m.niestroj@emb.dev>
regression.sh path is now tfm/api_ns/regression.sh, reflect it in the
doc.
Remove duplicate TF-M material.
Signed-off-by: Erwan Gouriou <erwan.gouriou@st.com>
Rather than providing flash partitions in samples, provide default
partition (no tests) as part of the board ns variant default configuration.
Update or remove related overlays.
Update ns variant yaml file to specify actual flash available for the
ns application (36K).
Additionaly, fix comment in b_u585i_iot02a_ns.
Signed-off-by: Erwan Gouriou <erwan.gouriou@st.com>
Clean up early days TF-M development directives which are outdated today.
Factorize remaining CMake instructions in soc.
Signed-off-by: Erwan Gouriou <erwan.gouriou@st.com>
Removes instances of setting CONFIG_BOARD that should have been
removed in the hwmv2 porting process
Signed-off-by: Jamie McCrae <jamie.mccrae@nordicsemi.no>
Replaces inaccurate or wrong vendor prefixes in board and soc
folder names with those from thr vendor prefix file
Signed-off-by: Jamie McCrae <jamie.mccrae@nordicsemi.no>
Adds the user-provided board qualifiers to Kconfig so it can be
used by application code, along with one containing the full string
Signed-off-by: Jamie McCrae <jamie.mccrae@nordicsemi.no>
Followup: #69905
Adopting new board terminology for CMake, python, and Kconfig code to
use qualifiers instead of identifiers.
Also adjusted to board target where applicable.
Signed-off-by: Torsten Rasmussen <Torsten.Rasmussen@nordicsemi.no>
Move the Kconfig symbols SOC_ESP32_PROCPU, SOC_ESP32_APPCPU,
SOC_ESP32S3_PROCPU, and SOC_ESP32S3_APPCPU.
The CPU cluster is defined in espessifc/soc.yml and should therefore
be available in the HWMv2 Kconfig.soc tree.
This will allow sysbuild to test for the CPU cluster when targeting
remote board for a build.
Update espressif boards accordingly.
Signed-off-by: Torsten Rasmussen <Torsten.Rasmussen@nordicsemi.no>
The GRTC channels and irqs configuration for Radio domain
is SOC specific not board specific. Move the configuration
to SOC dtsi file.
Signed-off-by: Piotr Pryga <piotr.pryga@nordicsemi.no>
Replace the uses of the hwmv1 names in the board documentation
with the corresponding hwmv2 ones.
Signed-off-by: Alberto Escolar Piedras <alberto.escolar.piedras@nordicsemi.no>
Remove the hwmv1 twister board definitions for the
nrf5340_bsim targets in preparation to
transition to the new definitions for hwmv2
Signed-off-by: Alberto Escolar Piedras <alberto.escolar.piedras@nordicsemi.no>
The child-owned-channels property of GRTC is used by nrfx_grtc
driver to exclude channels for common pool of channels allowed
for dynamic allocation. That is sort-of workaround for missing
property that allowes to remove some channels from the pool.
There are also not aligned GRTC IRQs for nRF54H20 and nRF54L15.
Only one of avaialbe IRQs was added to GRTC in DTS whereas
there should be two. That allows to find second IRQ by other
drivers that use GRTC peripehral.
Signed-off-by: Piotr Pryga <piotr.pryga@nordicsemi.no>
Enable CTimer0 and MRT0 channel 0 by default on the board,
and add more of the device instances in the counter api test overlay.
Signed-off-by: Declan Snyder <declan.snyder@nxp.com>
The led-strip alias can be determined in the base dts file.
Remove from overlay files and aggregate to the base dts file.
Signed-off-by: TOKITA Hiroshi <tokita.hiroshi@gmail.com>
Removing `choice WS2812_STRIP_DRIVER` to enable the use of multiple
types of WS2812 drivers.
Also, `menuconfig WS2812_STRIP` will be deleted as it does not
correspond to the appropriate settings.
Signed-off-by: TOKITA Hiroshi <tokita.hiroshi@gmail.com>
Enable support for the mx25u51245g flash chip present on the
RD RW612 BGA. Support has been verified with the following samples:
- samples/drivers/flash_shell
- tests/drivers/flash/common
Signed-off-by: Daniel DeGrasse <daniel.degrasse@nxp.com>
CAN requires 120 ohm termination at both ends of the bus, resulting in a
bus impedance of 60 ohm. Fix the board documentation to reflect this.
Signed-off-by: Henrik Brix Andersen <hebad@vestas.com>
This board fails to build for a multitude of samples & tests
which is blocking CI.
Let's provisionally disable it until the matter is properly
resolved.
The issue was introduced with the NXP HAL update to 2.15:
e4e463af81
See https://github.com/zephyrproject-rtos/zephyr/issues/69961
for more information.
Once this issue is fixed, this change should be reverted.
Signed-off-by: Alberto Escolar Piedras <alberto.escolar.piedras@nordicsemi.no>
The native_sim boards support the DMA emulator just like
native_posix. The tag was just never added in the native_sim
twister yaml. Let's add it.
Signed-off-by: Alberto Escolar Piedras <alberto.escolar.piedras@nordicsemi.no>
In practice, PPR is intended to be running code from RAM, so make this
the default choice for the `nrf54h20dk/nrf54h20/cpuppr` board target.
Keep the MRAM execution option as a `xip` variant of that target,
replacing the `ram` one.
Align the default `cpuapp` configuration for copying PPR's image to RAM
before it boots the child processor.
Signed-off-by: Grzegorz Swiderski <grzegorz.swiderski@nordicsemi.no>
nRF54H20 PDK is superseded by nRF54H20 DK and will no longer be
supported.
The board was superseded by nRF54H20 DK.
Signed-off-by: Andrzej Głąbek <andrzej.glabek@nordicsemi.no>
Add targets for the Application, Radio, and PPR cores in the nRF54H20
SoC on the nRF54H20 DK board.
Signed-off-by: Andrzej Głąbek <andrzej.glabek@nordicsemi.no>
Enable support for dma controller on RD RW612 BGA board, and add overlay
to enable board in dma loop transfer test
Signed-off-by: Daniel DeGrasse <daniel.degrasse@nxp.com>
Remove all optional, initial CAN sample point properties and rely on the
CAN timing calculations to automatically pick the preferred sample point
location based on the initial bitrate.
Signed-off-by: Henrik Brix Andersen <hebad@vestas.com>
Ignore userspace tag completely. Disabling USERSPACE in board kconfig is
not right, this will always be overidden by the application and we will
have build failures. The HW supports userspace and most filters in tests
depend on this capability.
Signed-off-by: Anas Nashif <anas.nashif@intel.com>
Broadcom boards live in /boards/brcm, not /boards/broadcom
This commit fixes bad links accordingly.
Signed-off-by: Benjamin Cabé <benjamin@zephyrproject.org>
Wurth Electronik boards live in /boards/we, not /boards/wurth_elektronik
This commit fixes bad links accordingly.
Signed-off-by: Benjamin Cabé <benjamin@zephyrproject.org>
U-Blox boards live in /boards/u-blox, not /boards/ublox
This commit fixes bad links accordingly.
Signed-off-by: Benjamin Cabé <benjamin@zephyrproject.org>
Aconno doesn't seem to be around anymore. Remove deadlink to product page.
Issue originally reported in #67099
Signed-off-by: Benjamin Cabé <benjamin@zephyrproject.org>
This board's docs are now to be found on Qorvo website, update links
accordingly.
Originally reported in #67099.
Signed-off-by: Benjamin Cabé <benjamin@zephyrproject.org>
Updated 3 dead (404) links in the doc page for Arduino Nicla Sense ME.
Also uniformized indenting of sphinx links in the process.
Signed-off-by: Benjamin Cabé <benjamin@zephyrproject.org>
Move the GPIO button dts nodes to the common dts file so it
be selected by either cpu core.
Also fix an error in the GPIO setting for one of the switches.
Signed-off-by: Mahesh Mahadevan <mahesh.mahadevan@nxp.com>
Update lpcxpresso55s69_cpu0 (and ns target) names in build commands in
the board documentation. Also, correct the documentation for dual core
images on this part, as it was out of date.
Signed-off-by: Daniel DeGrasse <daniel.degrasse@nxp.com>
Fix board identifier in overlays for the lpcxpresso55s69_cpu0 target.
Board identifiers were renamed with the following command:
for file in $(find . -name "lpcxpresso55s69_cpu0.*"); do;
mv $file ${file/_cpu0/_lpc55s69_cpu0};
done
Additionally, remove lpcxpresso55s69_ns overlay targets where they are
no longer needed (or rename them where they are)
Signed-off-by: Daniel DeGrasse <daniel.degrasse@nxp.com>
Using Zephyr SDK 0.16.5, openocd can be used to debug WBA based boards.
Fix documentation and clean up board.cmake configuration for
nucleo_wba52cg from a local configuration which shouldn't have been
upstreamed
Signed-off-by: Erwan Gouriou <erwan.gouriou@st.com>
Which will replace the old native_sim_64 to align it with
the hwmv2 naming conventions.
Signed-off-by: Alberto Escolar Piedras <alberto.escolar.piedras@nordicsemi.no>
Which will replace the old native_sim_64 to align it with
the hwmv2 naming conventions.
Signed-off-by: Alberto Escolar Piedras <alberto.escolar.piedras@nordicsemi.no>
Replace uses of native_[posix,sim]_64 in the documentation
and kconfig help messages with native_[posix,sim]/native/64
to match the hwmv2 naming.
Signed-off-by: Alberto Escolar Piedras <alberto.escolar.piedras@nordicsemi.no>
Remove the hwmv1 twister board definitions for
native_posix_64 / native_sim_64 in preparation to
transition to the new definitions for hwmv2
Signed-off-by: Alberto Escolar Piedras <alberto.escolar.piedras@nordicsemi.no>
This board's twister yaml file claims to support the
arduino-serial tests, but it does not provide
the necessary DTS node, which is causing
failures in CI.
Let's remove the tag from the twister board definition.
Signed-off-by: Alberto Escolar Piedras <alberto.escolar.piedras@nordicsemi.no>
