to its own linker file snippet so snippets can be placed before it.
Using zephyr_linker_sources().
Signed-off-by: Øyvind Rønningstad <oyvind.ronningstad@nordicsemi.no>
This adds the necessary bits to build the Xtensa HAL as
a module, and removes the bits to use the HAL built with
the Zephyr SDK.
Signed-off-by: Daniel Leung <daniel.leung@intel.com>
To be able to define main() in C++ code we need to have its
prototype defined somewhere visibly. Otherwise name mangling
will prevent the linker from finding it.
Zephyr assumes a void main(void) prototype and therefore
this will be the prototype after renaming:
void zephyr_app_main(void);
Signed-off-by: Alberto Escolar Piedras <alpi@oticon.com>
Runtime stack traces (at least as currently implemented)
don't work on x86_64 normally as RBP is treated as a general-
purpose register. Depend on CONFIG_NO_OPTIMIZATIONS to enable
this on 64-bit.
Signed-off-by: Andrew Boie <andrew.p.boie@intel.com>
qemu_x86_64 will exit the emulator on a fatal system error,
like qemu_x86 already does.
Improves CI times when tests fail since sanitycheck will not
need to wait for the timeout to expire.
Signed-off-by: Andrew Boie <andrew.p.boie@intel.com>
We now dump more information for less common cases,
and this is now centralized code for 32-bit/64-bit.
All of this code is now correctly wrapped around
CONFIG_EXCEPTION_DEBUG. Some cruft and unused defines
removed.
Signed-off-by: Andrew Boie <andrew.p.boie@intel.com>
We need a size_t and not a u32_t for partition sizes,
for 64-bit compatibility.
Additionally, app_memdomain.h was also casting the base
address to a u32_t instead of a uintptr_t.
Signed-off-by: Andrew Boie <andrew.p.boie@intel.com>
Remove leading/trailing blank lines in .c, .h, .py, .rst, .yml, and
.yaml files.
Will avoid failures with the new CI test in
https://github.com/zephyrproject-rtos/ci-tools/pull/112, though it only
checks changed files.
Move the 'target-notes' target in boards/xtensa/odroid_go/doc/index.rst
to get rid of the trailing blank line there. It was probably misplaced.
Signed-off-by: Ulf Magnusson <Ulf.Magnusson@nordicsemi.no>
This is causing problems, as if we create a thread in
a system call we will *not* be using the kernel page
tables if CONFIG_KPTI=n, resulting in a crash when
the later call to copy_page_tables() tries to initialize
the PDPT (which is in the same page as the privilege
stack).
Just don't fiddle with this page's permissions; we don't
need it as a guard area anyway since we have a stack
guard placed immediately before it, and this page
is unused if user mode isn't active.
Signed-off-by: Andrew Boie <andrew.p.boie@intel.com>
Bool symbols implicitly default to 'n'.
A 'default n' can make sense e.g. in a Kconfig.defconfig file, if you
want to override a 'default y' on the base definition of the symbol. It
isn't used like that on any of these symbols though.
Also replace some
config
prompt "foo"
bool/int
with the more common shorthand
config
bool/int "foo"
See the 'Style recommendations and shorthands' section in
https://docs.zephyrproject.org/latest/guides/kconfig/index.html.
Signed-off-by: Ulf Magnusson <Ulf.Magnusson@nordicsemi.no>
Fix misspellings in docs (and Kconfig and headers processed into docs)
missed during regular reviews.
Signed-off-by: David B. Kinder <david.b.kinder@intel.com>
When we build without support for user mode, we do not need
a large number of MPU regions, so we should not allow having
MPU_GAP_FILLING unset. This would allow PRIV code execute from
SRAM, which is an unnecessary compromise on ARMv8-M builds
without USERSPACE support. We update the Kconfig dependencies
and add a sentence for clarification.
Signed-off-by: Ioannis Glaropoulos <Ioannis.Glaropoulos@nordicsemi.no>
For some reason, some users have been facing a bizarre issue
in which the -m32 option was not being passed to the linker
by cmake when building for the POSIX arch as a 32bit target,
even though the option was actually supported.
Instead of using zephyr_ld_options() which checks if an
option is supported and drops it otherwise, use
zephyr_link_libraries()
Signed-off-by: Alberto Escolar Piedras <alpi@oticon.com>
It's found that in nsim_hs_smp, sometimes the cpu
doesn't response inter-core interrupt after executing sleep
instruction.
It may be a bug of nsim, but needs more time to
investigate the root of this issue.
This commit is a workround for this, as nsim is just an
instruction simulator, no direct impact.
Signed-off-by: Wayne Ren <wei.ren@synopsys.com>
* necessary fixes after commit 11bd67db where ipi interrupt is used
to notify other cores to do a thread switch if necessary
* then for arc, it's needed to ignore swap_ok and check whether thread
switch is needed in the exit of irq handling.
Signed-off-by: Wayne Ren <wei.ren@synopsys.com>
dyn_reg_info has MPU_DYNAMIC_REGION_AREAS_NUM elements, just changing
the if check to be greater equal to this number to avoid access
MPU_DYNAMIC_REGION_AREAS_NUM element causing an out-of-bounds write.
CID: 205648
Fixes#20487
Signed-off-by: Flavio Ceolin <flavio.ceolin@intel.com>
The races are believed to be resolved with the patch to
irq_offload(). Allow the MMU to be turned on and enable
it for qemu_x86_64.
Signed-off-by: Andrew Boie <andrew.p.boie@intel.com>
Move PLATFORM_SPECIFIC_INIT declaration from Cortex-M Kconfig to the
ARM arch Kconfig in order to make it available for all ARM variants.
The rationale is that there is really no good reason why
platform-specific initialisation should be a Cortex-M-specific feature
and that Cortex-R port is expected to utilise this in a near future.
Signed-off-by: Stephanos Ioannidis <root@stephanos.io>
This commit inlines the direct ISR functions that were previously
implemented in irq_manage.c, since the PR #20119 resolved the circular
dependency between arch.h and kernel_structs.h described in the issue
#3056.
Signed-off-by: Stephanos Ioannidis <root@stephanos.io>
This commit inlines arch_isr_direct_header function that was previously
placed in irq_manage.c for no good reason (possibly in relation to the
FIXME for #3056).
In addition, since the PR #20119 resolved the header circular
dependency issue described in the issue #3056, this commit removes the
references to it in the code.
The reason for not inlining _arch_is_direct_pm as the #3056 FIXME
suggests is that there is little to gain from doing so and there still
exists circular dependency for the headers required by this function
(#20119 only addresses kernel_structs.h, which is required for _current
and _kernel, which, in turn, is required for handling interrupt nesting
in many architectures; in fact, Cortex-A and Cortex-R port will require
it as well).
Signed-off-by: Stephanos Ioannidis <root@stephanos.io>
Mark the old time conversion APIs deprecated, leave compatibility
macros in place, and replace all usage with the new API.
Signed-off-by: Andy Ross <andrew.j.ross@intel.com>
Promote the private z_arch_* namespace, which specifies
the interface between the core kernel and the
architecture code, to a new top-level namespace named
arch_*.
This allows our documentation generation to create
online documentation for this set of interfaces,
and this set of interfaces is worth treating in a
more formal way anyway.
Signed-off-by: Andrew Boie <andrew.p.boie@intel.com>
These are not part of the generic kernel to
architecture interface, rename appropriately to
reflect they are ARC-specific.
Signed-off-by: Andrew Boie <andrew.p.boie@intel.com>
This API was only created to facilitate testing of kernel
objects in IRQ context, never for actual applications.
Signed-off-by: Andrew Boie <andrew.p.boie@intel.com>
We allow the run-time, full paritioning of the SRAM space by the
ARMv8-M MPU driver to be an optional feature.
Signed-off-by: Ioannis Glaropoulos <Ioannis.Glaropoulos@nordicsemi.no>
This commit moves the function mpu_configure_regions(.) from
arm_mpu_v7_internal.h to arm_mpu.c. The function is to be used
by the both ARMv7-M MPU driver, as well as the ARMv8-M MPU
driver (when it behaves like the ARMv7-M driver).
Signed-off-by: Ioannis Glaropoulos <Ioannis.Glaropoulos@nordicsemi.no>
We introduce MPU_GAP_FILLING Kconfig option that instructs
the MPU driver to enforce a full SRAM partitioning, when it
programs the dynamic MPU regions (user thread stack, PRIV stack
guard and application memory domains) at context-switch. We
allow this to be configurable, in order to increase the number
of MPU regions available for application memory domain programming.
This option is introduced in arch/Kconfig, as it is expected
to serve as a cross-ARCH symbol. The option can be set by the
user during build configuration.
By not enforcing full partition, we may leave part of kernel
SRAM area covered only by the default ARM memory map. This
is fine for User Mode, since the background ARM map does not
allow nPRIV access at all. The difference is that kernel code
will be able to attempt fetching instructions from kernel SRAM
area without this leading directly to a MemManage exception.
Since this does not compromize User Mode, we make the skipping
of full partitioning the default behavior for the ARMv8-M MPU
driver. The application developer may be able to overwrite this.
In the wake of this change we update the macro definitions in
arm_core_mpu_dev.h that derive the maximum number of MPU regions
for application memory domains.
Signed-off-by: Ioannis Glaropoulos <Ioannis.Glaropoulos@nordicsemi.no>
Some code for unwinding stacks and z_x86_fatal_error()
now in a common C file, suitable for both modes.
Signed-off-by: Andrew Boie <andrew.p.boie@intel.com>
When compiling the components under the arch directory, the compiler
include paths for arch and kernel private headers need to be specified.
This was previously done by adding 'zephyr_library_include_directories'
to CMakeLists.txt file for every component under the arch directory,
and this resulted in a significant amount of duplicate code.
This commit uses the CMake 'include_directories' command in the root
CMakeLists.txt to simplify specification of the private header include
paths for all the arch components.
Signed-off-by: Stephanos Ioannidis <root@stephanos.io>
This commit refactors kernel and arch headers to establish a boundary
between private and public interface headers.
The refactoring strategy used in this commit is detailed in the issue
This commit introduces the following major changes:
1. Establish a clear boundary between private and public headers by
removing "kernel/include" and "arch/*/include" from the global
include paths. Ideally, only kernel/ and arch/*/ source files should
reference the headers in these directories. If these headers must be
used by a component, these include paths shall be manually added to
the CMakeLists.txt file of the component. This is intended to
discourage applications from including private kernel and arch
headers either knowingly and unknowingly.
- kernel/include/ (PRIVATE)
This directory contains the private headers that provide private
kernel definitions which should not be visible outside the kernel
and arch source code. All public kernel definitions must be added
to an appropriate header located under include/.
- arch/*/include/ (PRIVATE)
This directory contains the private headers that provide private
architecture-specific definitions which should not be visible
outside the arch and kernel source code. All public architecture-
specific definitions must be added to an appropriate header located
under include/arch/*/.
- include/ AND include/sys/ (PUBLIC)
This directory contains the public headers that provide public
kernel definitions which can be referenced by both kernel and
application code.
- include/arch/*/ (PUBLIC)
This directory contains the public headers that provide public
architecture-specific definitions which can be referenced by both
kernel and application code.
2. Split arch_interface.h into "kernel-to-arch interface" and "public
arch interface" divisions.
- kernel/include/kernel_arch_interface.h
* provides private "kernel-to-arch interface" definition.
* includes arch/*/include/kernel_arch_func.h to ensure that the
interface function implementations are always available.
* includes sys/arch_interface.h so that public arch interface
definitions are automatically included when including this file.
- arch/*/include/kernel_arch_func.h
* provides architecture-specific "kernel-to-arch interface"
implementation.
* only the functions that will be used in kernel and arch source
files are defined here.
- include/sys/arch_interface.h
* provides "public arch interface" definition.
* includes include/arch/arch_inlines.h to ensure that the
architecture-specific public inline interface function
implementations are always available.
- include/arch/arch_inlines.h
* includes architecture-specific arch_inlines.h in
include/arch/*/arch_inline.h.
- include/arch/*/arch_inline.h
* provides architecture-specific "public arch interface" inline
function implementation.
* supersedes include/sys/arch_inline.h.
3. Refactor kernel and the existing architecture implementations.
- Remove circular dependency of kernel and arch headers. The
following general rules should be observed:
* Never include any private headers from public headers
* Never include kernel_internal.h in kernel_arch_data.h
* Always include kernel_arch_data.h from kernel_arch_func.h
* Never include kernel.h from kernel_struct.h either directly or
indirectly. Only add the kernel structures that must be referenced
from public arch headers in this file.
- Relocate syscall_handler.h to include/ so it can be used in the
public code. This is necessary because many user-mode public codes
reference the functions defined in this header.
- Relocate kernel_arch_thread.h to include/arch/*/thread.h. This is
necessary to provide architecture-specific thread definition for
'struct k_thread' in kernel.h.
- Remove any private header dependencies from public headers using
the following methods:
* If dependency is not required, simply omit
* If dependency is required,
- Relocate a portion of the required dependencies from the
private header to an appropriate public header OR
- Relocate the required private header to make it public.
This commit supersedes #20047, addresses #19666, and fixes#3056.
Signed-off-by: Stephanos Ioannidis <root@stephanos.io>
Use this short header style in all Kconfig files:
# <description>
# <copyright>
# <license>
...
Also change all <description>s from
# Kconfig[.extension] - Foo-related options
to just
# Foo-related options
It's clear enough that it's about Kconfig.
The <description> cleanup was done with this command, along with some
manual cleanup (big letter at the start, etc.)
git ls-files '*Kconfig*' | \
xargs sed -i -E '1 s/#\s*Kconfig[\w.-]*\s*-\s*/# /'
Signed-off-by: Ulf Magnusson <Ulf.Magnusson@nordicsemi.no>
Clean up space errors and use a consistent style throughout the Kconfig
files. This makes reading the Kconfig files more distraction-free, helps
with grepping, and encourages the same style getting copied around
everywhere (meaning another pass hopefully won't be needed).
Go for the most common style:
- Indent properties with a single tab, including for choices.
Properties on choices work exactly the same syntactically as
properties on symbols, so not sure how the no-indentation thing
happened.
- Indent help texts with a tab followed by two spaces
- Put a space between 'config' and the symbol name, not a tab. This
also helps when grepping for definitions.
- Do '# A comment' instead of '#A comment'
I tweaked Kconfiglib a bit to find most of the stuff.
Some help texts were reflowed to 79 columns with 'gq' in Vim as well,
though not all, because I was afraid I'd accidentally mess up
formatting.
Signed-off-by: Ulf Magnusson <Ulf.Magnusson@nordicsemi.no>
In the cortex-r port we are currently using GIC as a fake cascade
controller hooked to a fake parent IRQ #0. And in gic_init() we use
IRQ_CONNECT() to connect this dummy IRQ.
Unfortunately this value is shifted and offset when calling
irq_set_priority_next_level() that tries to set the IRQ priority on a
value of 0xffffffff.
This value is offset again in gic_irq_set_priority() that actually sets
the priority on the PPI #31.
Fix this avoiding to set any priority for IRQ #0.
Signed-off-by: Carlo Caione <ccaione@baylibre.com>
Existed already in commit 8ddf82cf70 ("First commit"). Has never been
used.
Found with a script.
Signed-off-by: Ulf Magnusson <Ulf.Magnusson@nordicsemi.no>
Existed already in commit 8ddf82c ("First commit"). Has never been
used.
Found with a script.
Also remove some pointless menus that have no visible symbols in them.
Signed-off-by: Ulf Magnusson <Ulf.Magnusson@nordicsemi.no>
Adding r0 to the clobber list in the inline ASM block of
z_arch_switch_to_main_thread(). This instructs assembler
to not use r0 to store ASM expression operands, e.g. in
the subsequent instruction, msr PSR %1.
We also do a minor optimization with the clearing of R1
before jumping to main.
Signed-off-by: Ioannis Glaropoulos <Ioannis.Glaropoulos@nordicsemi.no>
