- Add integration_platforms to avoid excessive filtering
- Make sure integration platforms are actually part of the filter
- Fix some tags and test meta data
Signed-off-by: Anas Nashif <anas.nashif@intel.com>
Add the '.buffered' field to the dac_channel_cfg structure
when testing the DAC.
This boolean parameter is initialised to 'true' to PASS the test.
It follows the https://github.com/zephyrproject-rtos/zephyr/pull/57730
Also changed for the samples/drivers/dac
Signed-off-by: Francois Ramu <francois.ramu@st.com>
PECI bus sample requires a controller and a target
Intel system(PECI controller) + Embedded controller(PECI target),
where EC HW can be add-on card (mec172xmodular) or onboard EC.
MEC172x EVB is not intended to be connected hence excluding
the platform.
Signed-off-by: Jose Alberto Meza <jose.a.meza.arellano@intel.com>
Adds a simple auxdisplay sample which outputs hello world and the
name of the board. A sample overlay is provided for the
nucleo_f746zg board with a Hitachi HD44780-compatible display.
Signed-off-by: Jamie McCrae <spam@helper3000.net>
Adds the AON Timer device in the OpenTitan Earlgrey device tree.
Adds overlay files to enable the watchdog and set the alias to
`watchdog0`.
Adds the AON timer (watchdog part) to the supported features section
of the OpenTitan documentation.
Signed-off-by: Tyler Ng <tkng@rivosinc.com>
This change creates an overlay file so that the adc sample
can be used with da1469x_dk_pro kit.
Both ADC are configured with several channels.
Signed-off-by: Jerzy Kasenberg <jerzy.kasenberg@codecoup.pl>
- The boards\arm\cy8cproto_063_ble board now has ADC enabled
- This includes overlay files for the test app and sample app
Signed-off-by: Bill Waters <bill.waters@infineon.com>
Add an IVSHMEM Ethernet sample to communicate between Zephyr
and Linux root cell within the Jailhouse hypervisor.
The supported configuration runs the Jailhouse hypervisor
within QEMU Cortex-A53.
Signed-off-by: Grant Ramsay <gramsay@enphaseenergy.com>
Enable ADC support for RT1040 EVK. Tested using samples/drivers/adc,
using channels 3 and 4 of ADC0.
Signed-off-by: Daniel DeGrasse <daniel.degrasse@nxp.com>
Add the alias to the MX25LM512 octo-NOR flash for the spi-flash node.
Remove the overlay for the samples/drivers/spi_flash as no MDMA driver
exists yet for the stm32h7.
Signed-off-by: Francois Ramu <francois.ramu@st.com>
Twister now supports using YAML lists for all fields that were written
as space-separated lists. Used twister_to_list.py script. Some artifacts
on string length are due to how ruamel dumps content.
Signed-off-by: Gerard Marull-Paretas <gerard.marull@nordicsemi.no>
With the minimal libc moving to using the common malloc implementation,
boards and samples with minimal libc-specific settings need to switch
to using the common malloc settings instead.
Signed-off-by: Stephanos Ioannidis <stephanos.ioannidis@nordicsemi.no>
- Added initial version of Infineon CAT1 Flash driver
- Added binding file for infineon,cat1-flash-controller.yaml
- Added overlays for subsys/nvs and drivers/flash_shell
to support cy8cproto_063_ble, cy8cproto_062_4343w boards
- Defined erase-block-size in PSoC6 MPN dtsi.
Signed-off-by: Sreeram Tatapudi <sreeram.praveen@infineon.com>
Disable various samples because they require certain digital signals
from the Arduino header, which are not connected when the board is
shipped and therefore not defined via the connector gpio-map.
Signed-off-by: Stephan Linz <linz@li-pro.net>
- This includes the driver, test app, and sample app
- Only the boards\arm\cy8cproto_062_4343w board is supported for now
Signed-off-by: Bill Waters <bill.waters@infineon.com>
As of today it is not possible to use SPI dt-spec macros in C++,
something known and documented. The main reason is because `cs` property
is initialized using a compound literal, something not supported in C++.
This PR takes another approach, that is to not make `cs` a pointer but a
struct member. This way, we can perform a regular initialization, at the
cost of using extra memory for unused delay/pin/flags if `cs` is not
used.
Fixes#56572
Signed-off-by: Gerard Marull-Paretas <gerard.marull@nordicsemi.no>
Remove include of adc dt-bindings header since these are
already included in the root .dtsi file that adds an adc.
Signed-off-by: Benjamin Björnsson <benjamin.bjornsson@gmail.com>
NTC thermistor changes updated the sample app output,
correcting harness string to match sample app.
Signed-off-by: Al Semjonovs <asemjonovs@google.com>
PR https://github.com/zephyrproject-rtos/zephyr/pull/55129 deleted the
"port-sel" property. Delete this property from remaining Microchip SoC
variants and boards.
Test: west build -b mec172xevb_assy6906 samples/drivers/espi/
Signed-off-by: Keith Short <keithshort@google.com>
The `main` function now returns `int` instead of `void` and therefore
must return a value.
Signed-off-by: Stephanos Ioannidis <stephanos.ioannidis@nordicsemi.no>
This is a follow-up to commit 9fa35bc9a0.
Align specification of the expected console output with the changes
done to the sample in the above commit.
Signed-off-by: Andrzej Głąbek <andrzej.glabek@nordicsemi.no>
MISRA Rule 5.7 requires uniqueness of tag identifiers. Shell is
frequently problematic because many code uses `const struct shell
*shell`. This causes CI noise every time one of these shell files is
edited, so let's update all of them with `const struct shell *sh`
instead.
Signed-off-by: Gerard Marull-Paretas <gerard.marull@nordicsemi.no>
This applies the coccinelle script to another set of files:
samples/bluetooth/bthome_sensor_template/src/main.c
samples/boards/stm32/power_mgmt/standby_shutdown/src/main.c
samples/drivers/smbus/src/main.c
samples/drivers/virtualization/ivshmem/doorbell/src/ivshmem.c
samples/fuel_gauge/max17048/src/main.c
samples/hello_world/src/main.c
samples/sensor/proximity_polling/src/main.c
samples/subsys/logging/ble_backend/src/main.c
tests/drivers/build_all/mfd/src/main.c
Signed-off-by: Keith Packard <keithp@keithp.com>
Remove RETURN_FROM_MAIN macro which performed control flow, violating
compliance tests. Replace with explicit use of posix_exit_main or return as
appropriate.
Signed-off-by: Keith Packard <keithp@keithp.com>
As both C and C++ standards require applications running under an OS to
return 'int', adapt that for Zephyr to align with those standard. This also
eliminates errors when building with clang when not using -ffreestanding,
and reduces the need for compiler flags to silence warnings for both clang
and gcc.
Most of these changes were automated using coccinelle with the following
script:
@@
@@
- void
+ int
main(...) {
...
- return;
+ return 0;
...
}
Approximately 40 files had to be edited by hand as coccinelle was unable to
fix them.
Signed-off-by: Keith Packard <keithp@keithp.com>
Zephyr SPI driver model for full-duplex operation assumes
data will be transmitted and received during each clock period.
The QMSPI driver for the XEC family also supported dual and
quad I/O use cases which are inherently half-duplex. To
support dual/quad the driver incorrectly processed spi buffers
as all transmit buffers first then all receive buffers. This
worked if only the SPI driver was used. It did not work with
the Zephyr flash SPI NOR driver which assumes SPI drivers
follow the SPI driver model. This commit implements a QMSPI
driver that follows the Zephyr SPI driver model resulting in
a slightly smaller driver. Dual/quad SPI transactions are
supported if the experimental SPI extended mode Zephyr
configuration flag is enabled. We also remove the QMSPI full duplex
driver added previously to support the flash SPI NOR driver.
Added board to spi loop-back test and spi_flash sample.
Signed-off-by: Scott Worley <scott.worley@microchip.com>
Provide a sample for ivshmem-doorbell running under virtualization
(QEMU). The sample relies on existing tools (ivshmem-server,
ivshmem-client) that must be run at the host (unix).
The sample can be run on userspace or kernelspace, and on arm64 (qemu,
kvm) and x86_64 (qemu) platforms.
This execution of this code is quite complex, thus the README should be
made available in the official documentation. This is why the code is a
sample and not a test.
Signed-off-by: Rodrigo Cataldo <rodrigo.cataldo@huawei.com>
Co-authored-by: Henri Xavier <datacomos@huawei.com>
Add the config for testing the jesd jedec sfdp of the octoNor flash
on the stm32h573 disco kit.
The external octoflash is the macronix MX25LM51245 or micron.
Signed-off-by: Francois Ramu <francois.ramu@st.com>
Add the new nucleo_h503rb board for testing the adc_api driver
on the ADC1 channel6 (pf12). Read the analog value of the ADC1
input on A5 of the arduino connector (CN16).
Signed-off-by: Francois Ramu <francois.ramu@st.com>
Similar to the changes made in #48048, compile in the appropriate lora
modem driver when `CONFIG_LORA=y`. The `LORA_SX12XX` symbol has no
use now so remove. LoRa and LoRaWAN subsystems are still marked as
unstable so no additional deprecation cycle is needed.
Signed-off-by: Jordan Yates <jordan.yates@data61.csiro.au>
Add all boards where the required overlay is present in the boards
folder to platform_allow. At the same time sort the list alphabetically
to keep a better overview.
Signed-off-by: Martin Jäger <martin@libre.solar>
Remove "-machine Q35" from QEMU_EXTRA_FLAGS since this is now the
default qemu_x86_64 configuration.
Signed-off-by: Andrei Emeltchenko <andrei.emeltchenko@intel.com>
Quark SE does not exist in zephyr anymore and this sample was there as
one of the first i2c users in Zephyr and is not providing any value any
more.
Signed-off-by: Anas Nashif <anas.nashif@intel.com>
After reworking counter driver to use device tree this sample
stopped to compile for nordic DKs. Providing overlays to fix
the compliation.
Signed-off-by: Krzysztof Chruscinski <krzysztof.chruscinski@nordicsemi.no>
Remove overlay added by mistake. SMBus EEPROM PR is not merged and the
dts would be updated for qemu_x86_64 board's dts.
Signed-off-by: Andrei Emeltchenko <andrei.emeltchenko@intel.com>
Treat sample data as signed when using differential mode for ADC
sampling, so that negative differential samples will be converted
correctly.
Signed-off-by: Daniel DeGrasse <daniel.degrasse@nxp.com>
Update board overlays for boards with LPADC IP present on their SOCs, to
use new LPADC API for channel numbering.
For the RT595 and LPCxpresso55S69 EVKs, additional channels are enabled
to demonstrate the resolution and differential channel features of
the LPADC.
Signed-off-by: Daniel DeGrasse <daniel.degrasse@nxp.com>
Add a board overlay for sam4s_xplained. Channel 5 (PB1) is enabled as
well as the internal temperature sensor.
Signed-off-by: Pieter De Gendt <pieter.degendt@basalte.be>
Add appropriate configuration parameters for using the Intel TCO
watchdog driver with the rpl_crb board.
Signed-off-by: Johan Hedberg <johan.hedberg@intel.com>
Add support for the Arduino GIGA board, an STM32H747XI based development
board in Arduino form factor, featuring external flash, SDRAM, Bluetooth
and WiFi.
Signed-off-by: Fabio Baltieri <fabiobaltieri@google.com>
Add support for RT595 EVK to display sample using RM68200 based MIPI
panel. The board is configured with an increased heap size to account
for the panel's high resolution.
Signed-off-by: Daniel DeGrasse <daniel.degrasse@nxp.com>
Microchip XEC devices specify GPIO pin using octal numbering and
organize pins in banks of 32. Chip documentation does not use
bank naming rather naming each pin by its octal number. This has
led to the developer having to calculate the bit position of a pin
in its 32-bit bank when a specifying the pin for GPIO usage. We
created a set of defines for all possible GPIO pins that specify
the DT GPIO bank name used in the chip level DTSI files and the
bit position in that bank.
Signed-off-by: Jay Vasanth <jay.vasanth@microchip.com>
Adds REQUIRED to samples and tests for finding the zephyr package
to align all samples and tests with the same call and parameters.
Signed-off-by: Jamie McCrae <jamie.mccrae@nordicsemi.no>
Zephyr supports ADCs with 16-bit resolution, but the ADC sample
displayed readings for such incorrectly due to too-small datatype
This commit fixes the ADC sample for ADCs with 16-bit resolution
Signed-off-by: Ben Marsh <ben.marsh@helvar.com>
The Kconfig symbol CONFIG_SPI_FLASH_AT45 is selected by default if a
compatible device is enabled.
Remove obsolete config entry.
Signed-off-by: Pieter De Gendt <pieter.degendt@basalte.be>
The Kconfig symbol for CONFIG_SPI_NOR is selected by default if a
compatible device is enabled.
Remove obsolete board config files.
Signed-off-by: Pieter De Gendt <pieter.degendt@basalte.be>
Add a driver implementation that uses the I2S peripheral.
Based off this blog post:
https://electronut.in/nrf52-i2s-ws2812/
Should help with #33505, #29877 and maybe #47780, as there is no garbage
data at the end of transmissions on nRF52832, and no gaps.
Signed-off-by: Jonathan Rico <jonathan@rico.live>
Add the overlay file to run the samples/drivers/led_pwm
on the nucelo_u575zi_q board.
Two green leds are used on pc7 and pb7 corresponding to pwm
channels of timers3 and timers4.
The leds node has to be disabled to let the pin for the pwm nodes.
Signed-off-by: Francois Ramu <francois.ramu@st.com>
Add the overlay file to run the samples/drivers/led_pwm
on the disco_l475_iot1 board. Two green leds are used on pa5 and pb14
corresponding on 2 pwm channels of timers2 and timers15.
The leds node has to be disabled to let the pin for the pwm nodes.
Signed-off-by: Francois Ramu <francois.ramu@st.com>
Configure the overlay file to run the samples/drivers/led_pwm
on the nucleo_l073rz and nucleo_f091rc board.
The green led is used on pa5 for pwm channels of timers2 channel
The leds node has to be disabled to let the pin for the pwm nodes.
The spi1 is disabled in that sample to avoid conflict on pa5 pin.
Signed-off-by: Francois Ramu <francois.ramu@st.com>
Current ipm_esp32 sample code requires esp32_net_firmware.c file
as source input, which is generated after ipm_esp32_net build.
esp32_net_firmware.c was manually added as binary blob, which needs to
be removed from the repository.
This change modifies ipm_esp32 CMakeLists.txt to include the build
output of ipm_esp32_net as input source of ipm_esp32 build, allowing the
binary blob to be removed.
Current approach shall be updated during next release.
Signed-off-by: Sylvio Alves <sylvio.alves@espressif.com>
Enables the watchdog timer within the DTS of supported boards,
add sample overlays showing how to use NMI WDT interrupts and
updated the board features inside the boards' doc / yaml files.
Signed-off-by: Stancu Florin <niflostancu@gmail.com>
The RX ready condition is unspecified with regard to being level or edge
triggered, so all available data should then be read once the RX ready
condition is detected. This change brings the sample into agreement with
the documentation and tests.
Signed-off-by: Brett Witherspoon <brett@witherspoon.engineering>
Remove the CAN_HAS_CANFD Kconfig helper symbol in order to allow enabling
CAN-FD support in the API regardless of driver support.
Change default to CAN-FD support being disabled and have samples and tests
that require CAN-FD support turn it on. This aligns the default
configuration across CAN controller drivers regardless of their
capabilities.
The rationale behind this is that we are starting to see MCUs with multiple
CAN controllers, some CAN-FD compatible, some not (e.g. NXP i.MX RT1060 and
FPGAs). Automatically enabling CAN-FD support based on the presence of a
CAN-FD capable CAN controller leads to different application default
settings based on the CAN controller(s) in use.
Signed-off-by: Henrik Brix Andersen <hebad@vestas.com>
Currently, the s32z270dc2_r52 board only supports running on RAM,
so samples or tests watchdogs that perform SoC reset will not produce
results. Set the build only for these samples and tests until the
reset SoC function is supported.
Signed-off-by: Quang Bui Trong <quang.buitrong@nxp.com>
Use the macro as defined by the
include/zephyr/dt-bindings/dma/stm32_dma.h to configure the
dma channel.
Signed-off-by: Francois Ramu <francois.ramu@st.com>
Align pins that are required to be shorted for this sample on
nRF52840 DK with those used in e.g. uart driver tests.
Signed-off-by: Andrzej Głąbek <andrzej.glabek@nordicsemi.no>
This sample uses the arduino_i2c and arduino_serial DT nodes, so it
should enable them explicitly, not assume they will be enabled by
default for a given board.
Signed-off-by: Andrzej Głąbek <andrzej.glabek@nordicsemi.no>
Replaces the capitalized DMIC tag with dmic as tags in Zephyr are by
convention lower case.
Was unexpectedly building this sample for intel boards while ignoring
dmic (lower case tag).
Signed-off-by: Tom Burdick <thomas.burdick@intel.com>
Replaces the capitalized I2S tag with i2s as tags in Zephyr are
by convention lower case.
Unexpectedly built the i2s echo sample when given the lower case tag in the
ignore.
Signed-off-by: Tom Burdick <thomas.burdick@intel.com>
Add support for RT595 evk to adc driver sample. RT595 uses external
reference voltage, which is set to 1.8V on this board.
Signed-off-by: Daniel DeGrasse <daniel.degrasse@nxp.com>
Add sample to test memory controllers that map external RAM into
SOC address space. This sample uses the "sram-ext" alias
node to determine the base address and size of the external RAM
device.
Signed-off-by: Daniel DeGrasse <daniel.degrasse@nxp.com>
Fix all line-length errors detected by yamllint:
yamllint -f parsable -c .yamllint $( find -regex '.*\.y[a]*ml' ) | \
grep '(line-length)'
Using a limit is set to 100 columns, not touching the commandlines in
GitHub workflows (at least for now).
Signed-off-by: Fabio Baltieri <fabiobaltieri@google.com>
Fix all hyphens errors detected by yamllint:
yamllint -f parsable -c .yamllint $( find -regex '.*\.y[a]*ml' ) | \
grep '(hyphens)'
Default config is only one space after the hyphen.
Signed-off-by: Fabio Baltieri <fabiobaltieri@google.com>
Fix all thruthy errors detected by yamllint:
yamllint -f parsable -c .yamllint $( find -regex '.*\.y[a]*ml' ) | \
grep '(truthy)'
This only accepts true/false for boolean properties. Seems like python
takes all sort of formats:
https://github.com/yaml/pyyaml/blob/master/lib/yaml/constructor.py#L224-L235
But the current specs only mention "true" or "false"
https://yaml.org/spec/1.2.2/#10212-boolean
Which is the standard yamllint config.
Excluding codeconv and workflow files, as some are using yes/no instead
in the respective documentation.
Signed-off-by: Fabio Baltieri <fabiobaltieri@google.com>
led0 and pwm_led0 are both referring to the same LED. The usage is
mutualy exclusive, as only one pin muxing can be applied.
Disabling child nodes is currently neither supported by gpio-leds device
nor by pwm-leds device. We need to disable either of the devices
completely for correct operation.
Please note that even if disabling of child nodes would be supported, the
devices would be empty anyway, as both have only one singe LED defined at
the moment. Therefore we can completely disable one of the devices in any
case.
Fixes: b876ad9d6f ("boards: arm: rpi_pico: add pwm bindings to
devictree")
Signed-off-by: Oliver Barta <o.barta89@gmail.com>
The fractional part of the divider value is a 4 bit value.
Fixes: 91f659d70a ("samples: led_pwm: add overlay for rpi_pico board")
Signed-off-by: Oliver Barta <o.barta89@gmail.com>
The default deferred logging mode is not appropriate here. The LOG_INF
messages "Turned on", "Turned off", ... indicate the current state and
should be printed immediately to keep log output in sync with actual
LED state.
Signed-off-by: Oliver Barta <o.barta89@gmail.com>
Print an error message if the UART doesn't support FIFO mode or FIFO
mode is not enabled.
Previously the sample would run with no errors, but wouldn't receive or
echo any data.
Signed-off-by: Trent Piepho <tpiepho@gmail.com>
Fixup ADC sample support for boards with LPADC present. This ADC only
supports an external reference voltage, which is a board-specific value.
Add reference voltage values for all supported boards.
Signed-off-by: Daniel DeGrasse <daniel.degrasse@nxp.com>
Clean up occurrences of "#if IS_ENABLED(CONFIG_FOO)" an replace
with classical "#if defined(CONFIG_FOO)".
Signed-off-by: Erwan Gouriou <erwan.gouriou@linaro.org>
Starting with commit b9b43a0eb772a464bba13833d11e3a31fbf4e09e, printk()
messages are handled by the logging subsystem. This can cause trouble
in watchdog related samples if the deferred logging mode is used (and
currently it is by default), because those samples are ended by a reset
and some messages may not get a chance to be outputted.
Since the same problem concerns also the ordinary logging messages that
may be produced during execution of the samples, this commit fixes it
by switching to the immediate logging mode, not by just disabling the
LOG_PRINTK option.
Signed-off-by: Andrzej Głąbek <andrzej.glabek@nordicsemi.no>
Added configuration which allows to test the sample using SPI_NOR
driver instead of NRF_QSPI driver.
SPI_NOR driver is generic, so nice to add possibility to check
how it is working.
Signed-off-by: Andrzej Puzdrowski <andrzej.puzdrowski@nordicsemi.no>
Add a sample program demonstrating the LED driver for Microchip's
XEC microcontrollers. The sample can be built for MEC152x and
MEC172x.
Signed-off-by: Jay Vasanth <jay.vasanth@microchip.com>
Remove regulator-fixed-sync specialization, create a single driver that
is always synchronous. The asynchronous part is rarely/never used, so
let's keep things simple for now.
Signed-off-by: Gerard Marull-Paretas <gerard.marull@nordicsemi.no>
Enable counter alarm sample on s32z270dc2_r52 boards, using the first
System Timer Module instance.
Signed-off-by: Manuel Arguelles <manuel.arguelles@nxp.com>
integration_platforms help us control what get built/executed in CI and
for each PR submitted. They do not filter out platforms, instead they
just minimize the amount of builds/testing for a particular
tests/sample.
Tests still run on all supported platforms when not in integration mode.
Signed-off-by: Anas Nashif <anas.nashif@intel.com>
This adds the support jedec configuration to run
the jedec sample application. So target boards can display
the content of the octo-NOR flash
of the stm32u585 and stm32l562 or stm32h735 disco boards.
The sfdp-bfp table is provided as example (overlay file),
to run this sample on the stm32l562e_dk platform.
It has to be defined in the deviceTree "in cases were runtime
retrieval of SFDP data is not desired."
Signed-off-by: Francois Ramu <francois.ramu@st.com>
Moving the SDFP table property from the sample to the device tree
of the stm32l562e_dk disco kit.
The MX52lm51245 Nor octoflash mounted on this boarddoes not
provide its own internal SFDP parameters.
With this patch, the SFDP table is given by the board DTS.
So that the stm32 ospi driver can initialized the NOR octoflash
correctly with the parameter from that property instead of
relying on the nor octoflash.
Signed-off-by: Francois Ramu <francois.ramu@st.com>
This adds the support jedec configuration to run
the jedec sample application. So target boards can display
the content of the octo-NOR flash
of the stm32u585 and stm32l562 or stm32h735 disco boards.
The sfdp-bfp table is provided as example (overlay file),
to run this sample on the stm32l562e_dk platform.
It has to be defined in the deviceTree "in cases were runtime
retrieval of SFDP data is not desired."
Signed-off-by: Francois Ramu <francois.ramu@st.com>
Adds the dma transfer for the octoSPI on NOR octo Flash
of the b_u585i_iot02a disco kit.
The channel for the GPDMA is 0-15 (0-7 for DMA1, 8-15 for DMA2)
The channel 12 to 15 are used for GPDMA transfers
to/from external memories.
The request is 41 for the OCTOSPI2.
Signed-off-by: Francois Ramu <francois.ramu@st.com>
Both `drivers/flash/flash_shell.c` and
`samples/drivers/flash_shell/src/main.c` provide a flash shell
utility called `flash`.
Rename the latter to disambiguate.
Signed-off-by: Chris Friedt <cfriedt@meta.com>
Remove the EEPROM shell overlay from the EEPROM driver sample as this was
only introduced as a build test for the EEPROM shell. This is now done in
tests/drivers/eeprom/shell.
Signed-off-by: Henrik Brix Andersen <hebad@vestas.com>
Many driver samples or tests only had 'drivers' as the tag, without a
tag indicating what driver that is exactly, so add some missing tags.
Signed-off-by: Anas Nashif <anas.nashif@intel.com>
When running a flash read command on the flash shell, the hexdump
prints came out incorrect. There was a space missing between the
ninth element and its preceding "|", and a redundant newline.
This commit fixes this issue.
Signed-off-by: Yonatan Schachter <yonatan.schachter@gmail.com>
The most of the wwdg peripherals requires a reduced apb clock
to pass the sample.drivers.watchdog.stm32_wwdg testcase.
This apb1 prescaler is added to the overlay file
for that particular clock.
Specific overlay for the stm32h7 family because of the APB1
bus clock named d2ppre1.
Signed-off-by: Francois Ramu <francois.ramu@st.com>
Add ADC driver sample overlays + update features in doc + metadata for TI
CC13x2/CC26x2 based boards (cc1352r_sensortag, cc1352r1_launchxl,
cc26x2r1_launchxl).
Signed-off-by: Stancu Florin <niflostancu@gmail.com>
Skip all CAN controller tests utilizing CAN loopback mode for the
kvaser,pcican CAN controller card as emulated in QEMU.
QEMU emulation of the SJA1000 CAN controller backend does not yet support
the SJA1000 Self Reception Request command which is required for proper
loopback operation.
Signed-off-by: Henrik Brix Andersen <henrik@brixandersen.dk>
Use printf() instead of printk() for printing sample output. According to
the documentation Zephyr printk() and friends are for printing kernel debug
messages.
With printf() instead of printk() the CAN counter sample passes twister
test execution on native_posix and native_posix_64.
Fixes: #50570
Signed-off-by: Henrik Brix Andersen <hebad@vestas.com>
Now that IPM drivers are enabled based on devicetree we can
remove any cases of them getting enabled by Kconfig, *defconfig*,
and *.conf files.
We need to remove any cases of them getting enabled by
Kconfig.defconfig* files as this can lead to errors.
Signed-off-by: Kumar Gala <kumar.gala@intel.com>
The can_frame and can_filter structs support a number of different flags
(standard/extended CAN ID type, Remote Transmission Request, CAN-FD format,
Bit Rate Switch, ...). Each of these flags is represented as a discrete bit
in the given structure.
This design pattern requires every user of these structs to initialize all
of these flags to either 0 or 1, which does not scale well for future flag
additions.
Some of these flags have associated enumerations to be used for assignment,
some do not. CAN drivers and protocols tend to rely on the logical value of
the flag instead of using the enumeration, leading to a very fragile
API. The enumerations are used inconsistently between the can_frame and
can_filter structures, which further complicates the API.
Instead, convert these flags to bitfields with separate flag definitions
for the can_frame and can_filter structures. This API allows for future
extensions without having to revisit existing users of the two
structures. Furthermore, this allows driver to easily check for unsupported
flags in the respective API calls.
As this change leads to the "id_mask" field of the can_filter to be the
only mask present in that structure, rename it to "mask" for simplicity.
Fixes: #50776
Signed-off-by: Henrik Brix Andersen <hebad@vestas.com>
Exclude Arduino Portenta H7 because the flash driver isn't
supported yet on the M4 core.
Signed-off-by: Benjamin Björnsson <benjamin.bjornsson@gmail.com>
Add support for boards that implement GD32 SoC.
Overlay file for longan_nano_lite enables FWDGT.
Add WDT_FEED_INTERVAL to make adjustable
the execution cycle of wdt_feed().
And also, make waiting for the WDT_FEED_INTERVAL period
for the watchdog window opens at the start of the test.
Signed-off-by: TOKITA Hiroshi <tokita.hiroshi@gmail.com>
The .yaml file states that CAN is supported, but the basic sample
application samples/drivers/can/counter cannot be compiled without
additional configuration.
The loopback driver does not require any additional steps like the
linux SocketCAN driver, so it is safe to enable it by default and
get rid of the many overlay files in the tests.
ISO-TP tests and the counter sample are excluded via .yaml from
twister tests because of timing issues.
Signed-off-by: Martin Jäger <martin@libre.solar>
Apparently the URLs for these old products have been moved to under
"old2020" without any redirects ...
Signed-off-by: Stephanos Ioannidis <stephanos.ioannidis@nordicsemi.no>
The "Grove Base Shield" seems to be no longer listed in the Seeed
website, so its link is replaced with that of the "Base Shield V2",
which is the successor of the "Grove Base Shield."
Signed-off-by: Stephanos Ioannidis <stephanos.ioannidis@nordicsemi.no>
The "RGB LED strips: an overview" link no longer works and there is no
direct replacement, so there is no point in listing this document in
the references anymore.
Signed-off-by: Stephanos Ioannidis <stephanos.ioannidis@nordicsemi.no>
This commit fixes the outdated link to the "Chronodot" product page.
It seems "macetech" no longer lists the older versions of this product
with DS3231, so the link has been replaced with the one from Adafruit.
Signed-off-by: Stephanos Ioannidis <stephanos.ioannidis@nordicsemi.no>
The twister docs specify that `platform_allow` should only be used
if applications can only possibly run on the specified platforms. This
is not the case for these applications, which should be able to run on
any board with LoRa support.
Signed-off-by: Jordan Yates <jordan.yates@data61.csiro.au>
Up until now, the Zephyr CAN controller drivers set a default bitrate (or
timing) specified via devicetree and start the CAN controller in their
respective driver initialization functions.
This is fine for CAN nodes using only one fixed bitrate, but if the bitrate
is set by the user (e.g. via a DIP-switch or other HMI which is very
common), the CAN driver will still initialise with the default
bitrate/timing at boot and use this until the application has determined
the requested bitrate/timing and set it using
can_set_bitrate()/can_set_timing().
During this period, the CAN node will potentially destroy valid CAN frames
on the CAN bus (which is using the soon-to-be-set-by-the-application
bitrate) by sending error frames. This causes interruptions to the ongoing
CAN bus traffic when a Zephyr-based CAN node connected to the bus is
(re-)booted.
Instead, require all configuration (setting bitrate, timing, or mode) to
take place when the CAN controller is stopped. This maps nicely to entering
"reset mode" (called "configuration mode" or "freeze mode" for some CAN
controller implementations) when stopping and exiting this mode when
starting the CAN controller.
Fixes: #45304
Signed-off-by: Henrik Brix Andersen <hebad@vestas.com>
Add the flash channel support by implementing the controller attached
flash sharing APIs, including flash_read, flash_write, and flash_erase.
For flash_read, the max data payload the module can support is 64 bytes
in one transaction.
For flash_write, the max data payload the module can support is 16
bytes in one transaction.
Signed-off-by: Mulin Chao <mlchao@nuvoton.com>
Signed-off-by: Jun Lin <CHLin56@nuvoton.com>
Adds the dma transfer for the octoSPI on NOR octo Flash
of the stm32h7b3i and stm32h735g disco kits.
The channel for the MDMA is 0-15.
The MDMA request is 0x16 for the OCTOSPI1 fifo threshold
Signed-off-by: Francois Ramu <francois.ramu@st.com>
Adds the dma transfer for the octoSPI on NOR octo Flash
of the stm32l562e_dk disco kit.
The channel for the DMAMUX is 0-15 (0-7 for DMA1, 8-15 for DMA2)
The DMAMUX request is 41 for the OCTOSPI.
Signed-off-by: Francois Ramu <francois.ramu@st.com>
After add zephyr,flash-controller property, most gd32 boards support
flash_shell sample.
gd32vf103c_starter and gd32vf103v_eval only have 32KB SRAM, so we
should reduce CONFIG_HEAP_MEM_POOL_SIZE to 8KB.
gd32f350r_eval only have 16KB driver, exclude from flash_shell sample.
Signed-off-by: HaiLong Yang <hailong.yang@brainco.cn>
In a Controller Area Network a babbling node is a node continuously (and
usually erroneously) transmitting CAN frames with identical - often high -
priority. This constant babbling blocks CAN bus access for any CAN frame
with lower priority as these frames will loose the bus arbitration.
Being able to simulate a babbling CAN node is useful when examining the
behavior of other nodes on the same CAN bus when they constantly loose bus
arbitration.
Signed-off-by: Henrik Brix Andersen <henrik@brixandersen.dk>
The commit switches flash area access from FLASH_AREA_ macros
to FIXED_PARTITION_ macros and to usage of DTS node labels,
to identify partitions, instead of label property.
Signed-off-by: Dominik Ermel <dominik.ermel@nordicsemi.no>
As of today <zephyr/zephyr.h> is 100% equivalent to <zephyr/kernel.h>.
This patch proposes to then include <zephyr/kernel.h> instead of
<zephyr/zephyr.h> since it is more clear that you are including the
Kernel APIs and (probably) nothing else. <zephyr/zephyr.h> sounds like a
catch-all header that may be confusing. Most applications need to
include a bunch of other things to compile, e.g. driver headers or
subsystem headers like BT, logging, etc.
The idea of a catch-all header in Zephyr is probably not feasible
anyway. Reason is that Zephyr is not a library, like it could be for
example `libpython`. Zephyr provides many utilities nowadays: a kernel,
drivers, subsystems, etc and things will likely grow. A catch-all header
would be massive, difficult to keep up-to-date. It is also likely that
an application will only build a small subset. Note that subsystem-level
headers may use a catch-all approach to make things easier, though.
NOTE: This patch is **NOT** removing the header, just removing its usage
in-tree. I'd advocate for its deprecation (add a #warning on it), but I
understand many people will have concerns.
Signed-off-by: Gerard Marull-Paretas <gerard.marull@nordicsemi.no>
We auto-generate DT_COMPAT_<compat> defines so we dont need to
explicitly define them anymore.
NOTE: we need to source Kconfig.zephyr first to pull in the autogen
Kconfig.dts files.
Signed-off-by: Kumar Gala <galak@kernel.org>
Remove the custom Kconfig value for CONFIG_SHELL_ARGC_MAX as it is too low
to account for the new arguments to the "can send" shell command.
The default for CONFIG_SHELL_ARGC_MAX was increased to 20 in
32ebeb0a5c which is sufficient for sending
non-CAN-FD format frames using the new "can send" shell command.
Signed-off-by: Henrik Brix Andersen <hebad@vestas.com>
Now that crypto drivers are enabled based on devicetree we can
remove any cases of them getting enabled by proj.conf files.
Signed-off-by: Kumar Gala <galak@kernel.org>
Samples testcases should start with 'sample'. Some testcases
start with 'samples'.
This commit rename these testcases.
Signed-off-by: Katarzyna Giadla <katarzyna.giadla@nordicsemi.no>
Many device pointers are initialized at compile and never changed. This
means that the device pointer can be constified (immutable).
Automated using:
```
perl -i -pe 's/const struct device \*(?!const)(.*)= DEVICE/const struct
device *const $1= DEVICE/g' **/*.c
```
Signed-off-by: Gerard Marull-Paretas <gerard.marull@nordicsemi.no>
This change creates an overlay file so that the adc sample
is running on the nucleo_u575zi_q board.
Signed-off-by: Francois Ramu <francois.ramu@st.com>
It is frequent to find variable definitions like this:
```c
static const struct device *dev = DEVICE_DT_GET(...)
```
That is, module level variables that are statically initialized with a
device reference. Such value is, in most cases, never changed meaning
the variable can also be declared as const (immutable). This patch
constifies all such cases.
Signed-off-by: Gerard Marull-Paretas <gerard.marull@nordicsemi.no>
- Test effectively requires a microchip,xec-ps2, but it was "optional"
even though the test continued setting up a callback that makes use of
the device.
- Improve test filtering so that it requires a valid compatible to be
enabled (allows to delete redundant ps2 tag)
- Initialize device at compile time (allowing to constify its pointer)
Signed-off-by: Gerard Marull-Paretas <gerard.marull@nordicsemi.no>
- Require peci-0 alias (test without it is pointless)
- Initialize peci device at compile time
- Filter depending on alias
- Remove redundant peci tag
Signed-off-by: Gerard Marull-Paretas <gerard.marull@nordicsemi.no>
Rename the can_state enumerations to contain the word STATE to make their
meaning more clear:
- CAN_ERROR_ACTIVE => CAN_STATE_ERROR_ACTIVE
- CAN_ERROR_WARNING => CAN_STATE_ERROR_WARNING
- CAN_ERROR_PASSIVE => CAN_STATE_ERROR_PASSIVE
- CAN_BUS_OFF => CAN_STATE_BUS_OFF
Signed-off-by: Henrik Brix Andersen <hebad@vestas.com>
Remove the "z" prefix from the public CAN controller API types as this
makes them appear as internal APIs.
Signed-off-by: Henrik Brix Andersen <hebad@vestas.com>
Names of some testcases are duplicated in another files.
This change rename duplicated testcases.
Signed-off-by: Katarzyna Giadla <katarzyna.giadla@nordicsemi.no>
Explicitly set the newly add public_network and iq_inverted settings
in lora_modem_config in the lora send and receive samples.
Signed-off-by: Tim Cooijmans <timcooijmans@gmail.com>
code to demonstrate the utilization of assymetric
dual core infrastructure based on soft-IPM implementation.
Signed-off-by: Felipe Neves <felipe.neves@linaro.org>
Because 1-wire drivers no longer use depends on serial/i2c, but select
the Kconfig for the bus they depend on, several overlays can be removed.
Signed-off-by: Thomas Stranger <thomas.stranger@outlook.com>
Introduce zephyr,keyboard-scan chosen node property to point to the
node that implements the default KSCAN device. This is similar to
the zephyr,display property.
We switch over the samples to utilize the new property instead of
kscan0 alias.
Signed-off-by: Kumar Gala <galak@kernel.org>
espi saf node is not enabled in mec15xxevb_assy6853.dts so the sample
will fail to build. For now disable CONFIG_ESPI_SAF to get the sample
to build.
Signed-off-by: Kumar Gala <galak@kernel.org>
Now that eeprom drivers are enabled based on devicetree we can
remove any cases of them getting enabled by proj.conf files.
Signed-off-by: Kumar Gala <galak@kernel.org>
Adding configuration to run the watchdog sample application
on the stm32 boards through 2 common overlay files:
one for running on the IWDG one for WWDG, if compatible.
Signed-off-by: Francois Ramu <francois.ramu@st.com>
Having the LED device enabled in devicetree will now get the driver
enabled by default when CONFIG_LED=y is set. So we can remove
setting driver enabling Kconfig values in various .conf files.
Signed-off-by: Kumar Gala <galak@kernel.org>
Building for native_posix_64 exposes faulty format strings.
Changes in this commit also ensure that the shell code gets built in CI,
thus this kind of problem can not be introduced again later on.
Signed-off-by: Reto Schneider <reto.schneider@husqvarnagroup.com>
Sample has been referencing flash area by its label, but flash device
by chosen `zephyr,flash-controller`, while flash area does not have
to be positioned on a device selected by the chosen directive.
Signed-off-by: Dominik Ermel <dominik.ermel@nordicsemi.no>
Now that clock control drivers are enabled based on devicetree we
can remove any cases of them getting enabled by *defconfig and
proj.conf files.
Signed-off-by: Kumar Gala <galak@kernel.org>
Adding the yaml files to sub-applications to avoid bitrot and
specifying the main applications with remote harness instead of
build_only.
Fixes#47613
Signed-off-by: Aastha Grover <aastha.grover@intel.com>
This add a removes the SPI config
for the stm32H735 and stm32H7b3 disco boards
when testing the octoSPI.
Signed-off-by: Francois Ramu <francois.ramu@st.com>
Now that SPI drivers are enabled based on devicetree we can remove
any cases of them getting enabled by *defconfig and proj.conf files.
Signed-off-by: Kumar Gala <galak@kernel.org>
Update sample to use DEVICE_DT_GET_ONE to remove usage of
device_get_binding if the device is devicetree based.
Signed-off-by: Kumar Gala <galak@kernel.org>
Add alias to overlays for boards that switch the watchdog to be
used while running this sample.
Signed-off-by: Benjamin Björnsson <benjamin.bjornsson@gmail.com>
Any project with Kconfig option CONFIG_LEGACY_INCLUDE_PATH set to n
couldn't be built because some files were missing zephyr/ prefix in
includes
Re-run the migrate_includes.py script to fix all legacy include paths
Signed-off-by: Tomislav Milkovic <milkovic@byte-lab.com>
Merge the fpga_controller and fpga_controller shell
sample applications and add sample.yaml to enable testing in
twister.
Fixes#47613
Signed-off-by: Aastha Grover <aastha.grover@intel.com>
The sam0 ADC driver has ADC_CONFIGURABLE_INPUTS enabled, which means
that the device tree ADC nodes must include the zephyr,input-positive
property.
Signed-off-by: Attie Grande <attie.grande@argentum-systems.co.uk>
Removes deprecated conf files from the counter/alarm
sample and adds overlays to enable timer nodes in use.
Signed-off-by: Glauber Maroto Ferreira <glauber.ferreira@espressif.com>
Move to use DEVICE_DT_GET instead of device_get_binding as
we work on phasing out use of DTS 'label' property.
Signed-off-by: Kumar Gala <galak@kernel.org>
Move to use DEVICE_DT_GET_ONE instead of device_get_binding as
we work on phasing out use of DTS 'label' property.
Signed-off-by: Kumar Gala <galak@kernel.org>
Move to use DEVICE_DT_GET_ONE instead of device_get_binding as
we work on phasing out use of DTS 'label' property.
Signed-off-by: Kumar Gala <galak@kernel.org>
Move to use DEVICE_DT_GET instead of device_get_binding as
we work on phasing out use of DTS 'label' property.
Signed-off-by: Kumar Gala <galak@kernel.org>
hifive_unmatched has a jedec,spi-nor flash node, however we have no
SPI driver for the controller so exclude the platform from this sample.
Signed-off-by: Kumar Gala <galak@kernel.org>
Move to use DEVICE_DT_GET instead of device_get_binding as
we work on phasing out use of DTS 'label' property.
Signed-off-by: Kumar Gala <galak@kernel.org>
Add an overlay for rpi_pico board to the led_pwm sample.
This board only supports fairly high pwm frequencies so
the blinking of the LED is not supported. Turning it on/off
and fading is.
Signed-off-by: Joep Buruma <burumaj50@gmail.com>
As we phase out usage of 'label' devicetree property, remove uses
of DT_LABEL. Replace DT_LABEL with swN_spec.port->name.
Signed-off-by: Kumar Gala <galak@kernel.org>
Move to use DEVICE_DT_GET instead of device_get_binding as
we work on phasing out use of DTS 'label' property.
Signed-off-by: Kumar Gala <galak@kernel.org>
Move to use DEVICE_DT_GET_ONE instead of device_get_binding as
we work on phasing out use of DTS 'label' property.
Signed-off-by: Kumar Gala <galak@kernel.org>
