Change automated searching for files using "IRQ_CONNECT()" API not
including <zephyr/irq.h>.
Signed-off-by: Gerard Marull-Paretas <gerard.marull@nordicsemi.no>
Include the correct header file. This was uncovered due to
a recent change where zephyr/kernel.h include was removed
from init.h
Signed-off-by: Mahesh Mahadevan <mahesh.mahadevan@nxp.com>
The soc.h from the espressif HAL module provides register definitions
like APB_CLK_FREQ, which are required for the Zephyr TWAI driver.
Signed-off-by: Martin Jäger <martin@libre.solar>
Introduce support for Pinctrl driver on NXP S32Z/E SoC's.
The NXP S32 pin controller is a singleton node responsible for
controlling the pin function selection and pin properties, based on the
pin node group approach. The pinmux configuration is encoded in a
32-bit value.
Each S32 SoC implementing Pinctrl must create a `pinctrl_soc.h` header
which define SoC-specific macros to initialize the pinctrl structure.
Signed-off-by: Manuel Arguelles <manuel.arguelles@nxp.com>
This patch introduces support for NXP S32 devices, specifically for
S32Z27 from S32Z/E family.
NXP S32Z27 processors are composed of two Real-Time Units (RTU)
containing each four ARM Cortex-R52 cores with flexible split/lock
configuration, and dedicated internal SRAM.
Signed-off-by: Manuel Arguelles <manuel.arguelles@nxp.com>
The commit boot code does not call hp_sram_pm_banks() so there is
no need to do an extern declare.
Signed-off-by: Daniel Leung <daniel.leung@intel.com>
The functions to get memory bank counts are simple enough that
they can be always inlined. This mostly helps with debugging,
especially with NO optimizations, as inlining is being done only
if the inline keyword is specified. This creates a chicken and
egg problem where the SRAM init functions need to call these
before code copying can be done. However, these functions are
not in memory before code copying, resulting in jumping into
memory with random bits.
Signed-off-by: Daniel Leung <daniel.leung@intel.com>
There is a "load" flag associated with segment to be copied
into Xtensa attached memory during manifest parsing. So only
copy those segment if indicated so. There may be some segments
in the struct with NULL destination address. So this is
to avoid memcpy into NULL.
Signed-off-by: Daniel Leung <daniel.leung@intel.com>
There is an assumption in parse_module() during code/data copying
that the memory has already been zero-ed, and hence no need to
clear memory when a BSS segment is encountered. In CAVS ram
initialization code, bbzero() is called. However, in ACE code,
there is no such call. So add them.
Signed-off-by: Daniel Leung <daniel.leung@intel.com>
Now that VMPIDR_EL2 will be initialized in z_arm64_el2_init, the code
that I wrote for initializing VMPIDR_EL2 on fvp_baser_aemv8r can be
removed.
Signed-off-by: Huifeng Zhang <Huifeng.Zhang@arm.com>
The `ARCH` init level was added to solve a specific problem, call init
code (SYS_INIT/devices) before `z_cstart` in the `intel_adsp` platform.
The documentation claims it runs before `z_cstart`, but this is only
true if the SoC/arch takes care of calling:
```c
z_sys_init_run_level(_SYS_INIT_LEVEL_ARCH);
```
Which is only true for `intel_adsp` nowadays. So in practice, we now
have a platform specific init level. This patch proposes to do things in
a slightly different way. First, level name is renamed to `EARLY`, to
emphasize it runs in the early stage of the boot process. Then, it is
handled by the Kernel (inside `z_cstart()` before calling
`arch_kernel_init()`). This means that any platform can now use this
level. For `intel_adsp`, there should be no changes, other than
`gcov_static_init()` will be called before (I assume this will allow to
obtain coverage for code called in EARLY?).
Signed-off-by: Gerard Marull-Paretas <gerard.marull@nordicsemi.no>
MTL is just one platform and this code is going to be used in multiple
platforms currently under development, so reduce the confusion and move
to a common namespace.
Signed-off-by: Anas Nashif <anas.nashif@intel.com>
File still not being removed due to out-of-tree usage. We will drop it
once the external code has stopped referencing it.
Signed-off-by: Anas Nashif <anas.nashif@intel.com>
Split the defines based on domain and cleanup ace_v1x-regs.h so we can
finally remove it and stop include soc specific headers across the tree.
Future generations of this family will be able to use the same naming
scheme without having to use the version name in the file name.
Signed-off-by: Anas Nashif <anas.nashif@intel.com>
Convert timer driver to use a light weight syscon and DTS and convert
register information to use offsets and sys_read/sys_write instead of
structs.
Signed-off-by: Anas Nashif <anas.nashif@intel.com>
Now that we have shim defined for each platform, no need to support all
platforms within the same struct. This change exposes some bugs where we
were relying on the old structure and calling into unused register space
for example for SRAM initialization on some SoC generations.
Signed-off-by: Anas Nashif <anas.nashif@intel.com>
Cleanup soc.h and move interrupt defines into own headers. Rename some
of the defines for ACE to have a unified namespace.
Signed-off-by: Anas Nashif <anas.nashif@intel.com>
The DW register block was duplicated into the ACE header while we had
the same thing in the driver. Move everything to the driver as the first
step with further improvements planned on top of this.
Signed-off-by: Anas Nashif <anas.nashif@intel.com>
The file uses architecture specific IRQ calls without including
appropriate headers.
Signed-off-by: Gerard Marull-Paretas <gerard.marull@nordicsemi.no>
sys/util.h is not needed by soc.h, and was causing troubles with
redefinitions of ARRAY_SIZE (from HAL) in CI.
Signed-off-by: Gerard Marull-Paretas <gerard.marull@nordicsemi.no>
Some files were using macros defined in sys/util.h without including it,
e.g. for MHZ().
Signed-off-by: Gerard Marull-Paretas <gerard.marull@nordicsemi.no>
Some SoCs define stuff in soc.h, used in drivers or SoC code. Note that
soc.h is not introduced here as a catch-all header. soc.h optimizations
or removal is out of the scope of this patch.
Signed-off-by: Gerard Marull-Paretas <gerard.marull@nordicsemi.no>
Some files make use of NMI API (NMI_INIT()) without including the
appropriate headers.
Signed-off-by: Gerard Marull-Paretas <gerard.marull@nordicsemi.no>
With the incoming removal of kernel.h/types.h from init.h, lots of files
start to show compile errors because they relied on indirect
definitions, including errno.h.
Signed-off-by: Gerard Marull-Paretas <gerard.marull@nordicsemi.no>
Some files make use of CMSIS APIs/definitions without explicitely
including CMSIS headers.
Signed-off-by: Gerard Marull-Paretas <gerard.marull@nordicsemi.no>
The sys* ops like sys_clear_bit are indirectly included via arch CPU
header. Other stuff like find_msb_set end up included via this header as
well.
Signed-off-by: Gerard Marull-Paretas <gerard.marull@nordicsemi.no>
Do FW communication outside of memory window setup to accomodate for
additional IPC commands and headers.
Signed-off-by: Anas Nashif <anas.nashif@intel.com>
This is not guaranteed to match the physical layout of the memory, so
get them individually based on node label.
For initialization, use bbzero.
Signed-off-by: Anas Nashif <anas.nashif@intel.com>
Some windows might need to be set as writtable, so add a flag read-only
to DTS bindings which is set to true for all windows right now. This can
be set to false where needed.
Signed-off-by: Anas Nashif <anas.nashif@intel.com>
This was all done as part of the soc and called from the soc. Define
this type of console under drivers/console and use it in the SoCs
supporting that via SYS_INIT instead of calling the console code
directly.
Signed-off-by: Anas Nashif <anas.nashif@intel.com>
Instead of just declaring the memory window register in DTS and have
everything else all over the place (headers, Kconfig, etc.) this change
defines the memory window instances in DTS and uses the device model to
initialize the windows. Code is still part of the SoC, given that we do
not have a driver subsystem suitable for this type of device yet.
Move FW status to own workflow and separate from window setup.
Signed-off-by: Anas Nashif <anas.nashif@intel.com>
Clean up and refactor x86 SoC headers in preparation of adding
new platforms in the future.
Signed-off-by: Anisetti Avinash Krishna <anisetti.avinash.krishna@intel.com>
add common mec_gpio.h to allow access to common gpio_regs
structure for both mec15xx and mec17xx, used in pinctrl driver
Signed-off-by: Jay Vasanth <jay.vasanth@microchip.com>
This is an AArch64 board. We also add RK3399 SoC support,
as well as a very simple Synopsys 8250dw UART driver.
Signed-off-by: Henri Xavier <datacomos@huawei.com>
The Inter-DSP Communication (IDC) is being used to send
sched IPI to other CPU cores. When a core receives an IDC,
it needs to ACK it by clearing the BUSY bit in TDR, and also
needs to the BUSY bit in TDA to signal done after processing.
These two steps are needed to complete one IDC message.
If we do only one (and not both), the other side will not be
able to send another IDC message as the hardware still thinks
the core is processing the IDC message (and thus will not send
another one). So add the step to clear the BUSY bit in TDA so
we can have multiple sched IPIs.
Signed-off-by: Daniel Leung <daniel.leung@intel.com>
