CPU_HAS_NRF_IDAU is depending on SOC_SERIES_NRF91X and
SOC_NRF5340_CPUAPP.
This makes it more difficult to have an out-of-tree nrf SOC.
It is also an unnecessary dependency. There is no prompt for
CPU_HAS_NRF_IDAU, so it will not show up in menuconfig and it won't be
possible to enable it from a users Kconfig fragment.
The only way to enable it is to select it, and those that select this
option can themselves make sure that they only do so when appropriate.
Also, move NRF_SPU options out to SOC Kconfig files to also make
out-of-tree SoCs possible. With the added benefit of not polluting the
common soc/arm/Kconfig.
Signed-off-by: Sebastian Bøe <sebastian.boe@nordicsemi.no>
This adds a new driver for Renesas RZ/T2M.
The driver allows configuration of pin direction,
pull up/down resistors, drive strength and slew rate,
and selection of function for a pin.
Signed-off-by: Wojciech Sipak <wsipak@antmicro.com>
This adds a new SoC: SOC_RENESAS_RZT2M
and a new board: rzt2m_startek_kit
Signed-off-by: Wojciech Sipak <wsipak@antmicro.com>
Co-authored-by: Roman Dobrodii <rdobrodii@antmicro.com>
This allows XIP to be disabled for applications that execute in
RAM, which do not need XIP support from flash
Signed-off-by: Jamie McCrae <jamie.mccrae@nordicsemi.no>
Add support for mipi_dsi_detach API to dsi_mcux_2l driver, and
update RT5xx SOC interface to enable halting clocks for the MIPI DPHY.
Signed-off-by: Daniel DeGrasse <daniel.degrasse@nxp.com>
At present, many of the NXP S32 shim drivers do not make use of
devicetree instance-based macros because the NXP S32 HAL relies on an
index-based approach, requiring knowledge of the peripheral instance
index during both compilation and runtime, and this index might not
align with the devicetree instance index.
The proposed solution in this patch eliminates this limitation by
determining the peripheral instance index during compilation
through macrobatics and defining the driver's ISR within the shim
driver itself.
Note that for some peripheral instances is needed to redefine the
HAL macros of the peripheral base address, since the naming is not
uniform for all instances.
Signed-off-by: Manuel Argüelles <manuel.arguelles@nxp.com>
i.MX93 share similiar register layout with i.MX RT11xx. Change ccm driver
to align with i.MX RT11xx, and make it easier to enable other drivers.
Signed-off-by: Chekhov Ma <chekhov.ma@nxp.com>
At present, many of the NXP S32 shim drivers do not make use of
devicetree instance-based macros because the NXP S32 HAL relies on an
index-based approach, requiring knowledge of the peripheral instance
index during both compilation and runtime, and this index might not
align with the devicetree instance index.
The proposed solution in this patch eliminates this limitation by
determining the peripheral instance index during compilation
through macrobatics and defining the driver's ISR within the shim
driver itself.
Note that for some peripheral instances is needed to redefine the
HAL macros of the peripheral base address, since the naming is not
uniform for all instances.
Signed-off-by: Manuel Argüelles <manuel.arguelles@nxp.com>
Enable NXP FlexRAM in DTS and SOC code.
Do not configure flexram at runtime if the code is in the RAM.
Fix RT1060 DT to be more accurate.
Signed-off-by: Declan Snyder <declan.snyder@nxp.com>
Other drivers like the pinctrl_ti_k3 rely on a fully initialized system.
Move the am62x_init to an earlier stage than PRE_KERNEL_1 to keep both
PRE_KERNEL_{1,2} free for drivers.
Signed-off-by: Daniel Schultz <d.schultz@phytec.de>
- Make caparray delta a Kconfig variable
- Set caparray delta for beagle_bcf at beagleconnect_freedom_defconfig
Signed-off-by: Ayush Singh <ayushdevel1325@gmail.com>
Signed-off-by: Jason Kridner <jkridner@beagleboard.org>
Support NXP MRT on LPC55XXX SOC series, enable on
lpcxpresso55s69_cpu0, add test overlay to counter basic api test
Signed-off-by: Declan Snyder <declan.snyder@nxp.com>
At present, many of the NXP S32 shim drivers do not make use of
devicetree instance-based macros because the NXP S32 HAL relies on an
index-based approach, requiring knowledge of the peripheral instance
index during both compilation and runtime, and this index might not
align with the devicetree instance index.
The proposed solution in this patch eliminates this limitation by
determining the peripheral instance index during compilation
through macrobatics and defining the driver's ISR within the shim
driver itself.
Note that for some peripheral instances is needed to redefine the
HAL macros of the peripheral base address, since the naming is not
uniform for all instances.
Signed-off-by: Manuel Argüelles <manuel.arguelles@nxp.com>
As the name suggests, this commit attempts to cleanup some
of the configurations for the i.MX8 series. This cleanup
consists of either relocating the configuration or removing
unnecessary configurations.
As a rule of thumb, SoC-specific configurations have been moved
to Kconfig.series. If the configuration is by default 'y' and
needs to be set to 'n' or it has a numeric value then it has
been moved to Kconfig.defconfig.series. Configurations that
are default 'n' and were also explicitly set to 'n' have been
removed. Also, enabling logging has been moved to the board
level to avoid having to force all boards based on the same
SoC to enable logging.
Signed-off-by: Laurentiu Mihalcea <laurentiu.mihalcea@nxp.com>
This commit attempts to clean the memory.h header by doing
the following changes:
1) Change the include guard to the standard
ZEPHYR_....
2) Remove unused macro definitions.
Signed-off-by: Laurentiu Mihalcea <laurentiu.mihalcea@nxp.com>
Since platform.h is a SOF-specific header that's no
longer used there's no point in keeping the include/soc directory.
As such, move memory.h to include/ and modify the linker script
to reflect this location change.
Signed-off-by: Laurentiu Mihalcea <laurentiu.mihalcea@nxp.com>
This commit attempts to split the generic i.MX8 SoC into its
QXP and QM variants. As things are now, the i.MX8 SoC doesn't
have any NXP HAL files to back it up. As a consequence, the
native Zephyr drivers cannot be used.
To solve this issue, the generic i.MX8 has been split into
i.MX8QXP and i.MX8QM, each of them having different NXP HAL
files.
Signed-off-by: Laurentiu Mihalcea <laurentiu.mihalcea@nxp.com>
Most of the public APIs in `riscv_plic.h`
(except `riscv_plic_get_irq` & `riscv_plic_get_dev`) expect the
`irq` argument to be in Zephyr-encoded format, instead of the
previously `irq_from_level_2`-stripped version. The first level
IRQ is needed by `intc_plic` to differentiate between the
parent interrupt controllers, so that correct ISR offset can be
obtained using the LUT in `sw_isr_common`.
Signed-off-by: Yong Cong Sin <ycsin@meta.com>
NXP USB bindings were combined into one binding and using
a property corresponding to HAL enums which is improper use
of devicetree.
Signed-off-by: Declan Snyder <declan.snyder@nxp.com>
This CL is to minimize `CONFIG_SOC_SERIES_XXXX` definitions when we
introduce a new chip series. Most of them are relevant to register
layouts in different npcx soc series. It moves soc-specific register
definitions from `reg_def.h` to its own soc.h file.
Signed-off-by: Mulin Chao <mlchao@nuvoton.com>
At present, many of the NXP S32 shim drivers do not make use of
devicetree instance-based macros because the NXP S32 HAL relies on an
index-based approach, requiring knowledge of the peripheral instance
index during both compilation and runtime, and this index might not
align with the devicetree instance index.
The proposed solution in this patch eliminates this limitation by
determining the peripheral instance index during compilation
through macrobatics and defining the driver's ISR within the shim
driver itself.
Note that for some peripheral instances is needed to redefine the
HAL macros of the peripheral base address, since the naming is not
uniform for all instances.
Signed-off-by: Manuel Argüelles <manuel.arguelles@nxp.com>
Add a property for I2C channel switch selection. This property will
write to the SMBxxCHS register according to the I2C node you selected,
which can make channel swapping.
Signed-off-by: Tim Lin <tim2.lin@ite.corp-partner.google.com>
At present, many of the NXP S32 shim drivers do not make use of
devicetree instance-based macros because the NXP S32 HAL relies on an
index-based approach, requiring knowledge of the peripheral instance
index during both compilation and runtime, and this index might not
align with the devicetree instance index.
The proposed solution in this patch eliminates this limitation by
determining the peripheral instance index during compilation
through macrobatics and defining the driver's ISR within the shim
driver itself.
Note that for some peripheral instances is needed to redefine the
HAL macros of the peripheral base address, since the naming is not
uniform for all instances.
Signed-off-by: Manuel Argüelles <manuel.arguelles@nxp.com>
Fix cmake depreciation warning on pre-defined linker.id
(soc/arm/renesas_ra/ra4m1/linker.ld) used for arduino_uno_r4_minima.
Signed-off-by: Dmitrii Golovanov <dmitrii.golovanov@intel.com>
Allow user to disable CONFIG_ADJUST_DCDC for their board, rather than
selecting it at the SOC level. The symbol still defaults to enabled,
preserving existing behavior unless a user explicitly chooses to disable
it.
Signed-off-by: Daniel DeGrasse <daniel.degrasse@nxp.com>
At present, many of the NXP S32 shim drivers do not make use of
devicetree instance-based macros because the NXP S32 HAL relies on an
index-based approach, requiring knowledge of the peripheral instance
index during both compilation and runtime, and this index might not
align with the devicetree instance index.
The proposed solution in this patch eliminates this limitation by
determining the peripheral instance index during compilation
through macrobatics.
Note that for some peripheral instances is needed to define the
HAL macros of the peripheral base address because there are gaps
in the instances or there are SoCs with a single instance.
Signed-off-by: Manuel Argüelles <manuel.arguelles@nxp.com>
Several paths are checked for existence before added as global Zephyr
include path.
The existence check was needed because some tooling emit warnings on
non-existing paths.
Only few SoCs are using those pre-defined paths, yet this code runs
for all SoCs. The principle originates back from Kbuild days, and with
CMake it's more common and generally more visible to let the CMake code
defining libraries to specify include paths.
Furthermore it appears that several SoC implementation following the
<soc-path>/include was unaware that the path would be automatically
added as include path, cause they contain lines like:
zephyr_library_include_directories(include)
Remove pre-defineds path except the `<SOC_PATH>` path, which is
guaranteed to exists.
This simplifies the CMake logic in the top-level Zephyr CMakeLists.txt
file.
This cleanup further prepares for future work where SoCs need not to
be organised under architectures which is important for multi-arch SoCs.
Signed-off-by: Torsten Rasmussen <Torsten.Rasmussen@nordicsemi.no>
This commit introduce 'USE_SWITCH' feature into cortex-A/R(aarch32)
architecture
For introducing USE_SWITCH, the exception entry and exit are unified via
`z_arm_cortex_ar_enter_exc` and `z_arm_cortex_ar_exit_exc`. All
exceptions including ISR are using this way to enter and exit exception
handler.
Differentiate exception depth and interrupt depth. Allow doing
context switch when exception depth greater than 1 but not allow doing
this when interrupt depth greater than 1.
Currently, USE_SWITCH doesn't support FPU_SHARING and USERSPACE.
Signed-off-by: Huifeng Zhang <Huifeng.Zhang@arm.com>
This is support for AArch64 development board.
The board uses 4-core Cortex-A55, which are based on
the ARMv8.2 architecture.
In addition,we support smp support and
it can use 4-cores to run basic samples.
Signed-off-by: Charlie Xiong <1981639884@qq.com>
Commit c6e3bac4f changed the core clock frequency of LPC55XXX series.
That clock is used by the cortex-m systick timer, which is the
default timer used for system time in zephyr on this series.
The bug is that the config SYS_CLOCK_HW_CYCLES_PER_SEC default was not
updated on the affected platforms to account for this change, so system
time is currently recorded as 150% of reality. Fix this by changing the
kconfig to be set automatically at SOC level and remove board defaults.
Signed-off-by: Declan Snyder <declan.snyder@nxp.com>
For this SoC, an additional section is conditionally included on top of
the default linker script for Cortex-M. Set `SOC_LINKER_SCRIPT` to the
local `linker.ld`.
Signed-off-by: Grzegorz Swiderski <grzegorz.swiderski@nordicsemi.no>
Remove CONFIG_IPM_IMX_REV2, as this Kconfig is no longer needed. The
driver can now be enabled with CONFIG_IPM_IMX.
Update NXP HAL to remove this Kconfig as well.
Signed-off-by: Daniel DeGrasse <daniel.degrasse@nxp.com>
Remove nxp,imx-mu-rev2 compatible. This IP block is the same as the
nxp,imx-mu device, and should be handled by the same compatible
Instead, use CONFIG_HAS_MCUX to determine which HAL APIs should be used
to interact with the messaging unit IP.
Signed-off-by: Daniel DeGrasse <daniel.degrasse@nxp.com>
This commit updates all x86 SoCs to set SOC_LINKER_SCRIPT CMake
variable to point to active linker script directly.
Signed-off-by: Torsten Rasmussen <Torsten.Rasmussen@nordicsemi.no>
This commit updates all xtensa SoCs to set SOC_LINKER_SCRIPT CMake
variable to point to active linker script directly.
Signed-off-by: Torsten Rasmussen <Torsten.Rasmussen@nordicsemi.no>
This commit updates all sparc SoCs to set SOC_LINKER_SCRIPT CMake
variable to point to active linker script directly.
Signed-off-by: Torsten Rasmussen <Torsten.Rasmussen@nordicsemi.no>
This commit updates all riscv SoCs to set SOC_LINKER_SCRIPT CMake
variable to point to active linker script directly.
Signed-off-by: Torsten Rasmussen <Torsten.Rasmussen@nordicsemi.no>
This commit updates all posix SoCs to set SOC_LINKER_SCRIPT CMake
variable to point to active linker script directly.
Signed-off-by: Torsten Rasmussen <Torsten.Rasmussen@nordicsemi.no>
This commit updates all mips SoCs to set SOC_LINKER_SCRIPT CMake
variable to point to active linker script directly.
Signed-off-by: Torsten Rasmussen <Torsten.Rasmussen@nordicsemi.no>
This commit updates all arm64 SoCs to set SOC_LINKER_SCRIPT CMake
variable to point to active linker script directly.
Signed-off-by: Torsten Rasmussen <Torsten.Rasmussen@nordicsemi.no>
This commit updates all arm SoCs to set SOC_LINKER_SCRIPT CMake
variable to point to active linker script directly.
Signed-off-by: Torsten Rasmussen <Torsten.Rasmussen@nordicsemi.no>
