Start of Frame is not relevant for most classes, but it is crucial for
isochronous operation. The most prominent example where SOF is necessary
is USB Audio class.
Signed-off-by: Tomasz Moń <tomasz.mon@nordicsemi.no>
Extend macros from creating a PM device with an optional argument
which indicate whether type of device is ISR_SAFE or not.
Signed-off-by: Krzysztof Chruściński <krzysztof.chruscinski@nordicsemi.no>
In many cases suspending or resuming of a device is limited to
just a few register writes. Current solution assumes that those
operations may be blocking, asynchronous and take a lot of time.
Due to this assumption runtime PM API cannot be effectively used
from the interrupt context. Zephyr has few driver APIs which
can be used from an interrupt context and now use of runtime PM
is limited in those cases.
Patch introduces a new type of PM device - synchronous PM. If
device is specified as capable of synchronous PM operations then
device runtime getting and putting is executed in the critical
section. In that case, runtime API can be used from an interrupt
context. Additionally, this approach reduces RAM needed for
PM device (104 -> 20 bytes of RAM on ARM Cortex-M).
Signed-off-by: Krzysztof Chruściński <krzysztof.chruscinski@nordicsemi.no>
In the scan delegator when modifying the source we only want to
send a sync request to the upper layers if we are not yet synced,
and not also on a state change
Note that without this change the babblesim test for long writes
will fail
Signed-off-by: Andries Kruithof <andries.kruithof@nordicsemi.no>
Scan del bugfix
Signed-off-by: Andries Kruithof <andries.kruithof@nordicsemi.no>
Add support for sending long notifications, coming
from a long read, back to the application
Signed-off-by: Andries Kruithof <andries.kruithof@nordicsemi.no>
Make sure that buffers are large enough and add
semaphores so that we can do long reads
Signed-off-by: Andries Kruithof <andries.kruithof@nordicsemi.no>
Add cleanups to pin presence checks within the mipi_dbi SPI driver.
The cleanups now verify that GPIO and RESET pin devices are ready,
if they are present for the device instance.
Signed-off-by: Daniel DeGrasse <daniel.degrasse@nxp.com>
Use a delegate for reporting the core clock rate of the fake CAN
driver. This allows overriding the delegate at run-time and inspecting its
call count.
Signed-off-by: Henrik Brix Andersen <hebad@vestas.com>
Promote clk_ratio_adj to double for internal calculations related to ratio
to avoid compilation warnings related to implicit conversion from float
to double.
Signed-off-by: Mateusz Hołenko <mholenko@antmicro.com>
GR716A has two SPIMCTRL SPI controllers.
This adds the SPIMCTRL description to the DTS and makes the SPI
option available in the kernel configuration.
Signed-off-by: Martin Åberg <martin.aberg@gaisler.com>
This adds support for the GRLIB SPIMCTRL SPI controller used in LEON and
NOEL-V systems. SPIMCTRL can operate in two different modes: In the
default mode it allows memory-mapped read access to the flash data. When
set in the user mode, it can be used to generate SPI bus transactions.
Signed-off-by: Martin Åberg <martin.aberg@gaisler.com>
usbh_req_desc() truncates the descriptor id. This problem is most
visible with string descriptor requests, as only then can wIndex be
greater than 0xFF. In particular, this affects commonly used language
IDs such as English (United States), which is 0x0409.
Signed-off-by: Alexander Kaiser <akaiser@urbansky.com>
Fixes: #68360
This commit introduces <type>_VERSION_TWEAK_STRING which includes
the tweak field in the string, but without the extra version.
This format is used by MCUboot / imgtool, and thus makes it easier to
align code to the format used by MCUboot.
This commit also introduces <type>_VERSION_EXTENDED_STRING which
includes the tweak field in the string in addition to the extra version
field.
The new defines / variables is available in code, CMake, and Kconfig,
and it defined for KERNEL, APP, and custom types, such as MCUBOOT.
Signed-off-by: Torsten Rasmussen <Torsten.Rasmussen@nordicsemi.no>
Signed-off-by: Jamie McCrae <jamie.mccrae@nordicsemi.no>
The commit export TWEAK version to code through version.h.
This aligns the symbols available in code with those available in
CMake and Kconfig.
The new define is available for both KERNEL, APP, and custom version
types (such as MCUBOOT).
Signed-off-by: Torsten Rasmussen <Torsten.Rasmussen@nordicsemi.no>
The normal and posix philosophers samples seemed to have
a number of redundant choices in prj.conf.
Let's reduce to the minimum required for the sample. The
CONFIG_DEBUG_THREAD_INFO option is part of the
documentation, so leave it as-is.
Signed-off-by: Christopher Friedt <cfriedt@meta.com>
The number of forks should match the number of philophers, and
that is encoded via NUM_PHIL.
Change the build assert to match.
Signed-off-by: Christopher Friedt <cfriedt@meta.com>
The tag 'introduction' was misspelled 'inroduction'.
Correct it both the samples/philosophers and the
samples/posix/philosophers directories.
Signed-off-by: Christopher Friedt <cfriedt@meta.com>
The CONFIG_APP_LINK_WITH_POSIX_SUBSYS option was originally
present so that internal POSIX implementation headers would be
on the include path.
There is no implicit need for any app or library to include
private POSIX headers. Instead, the standard POSIX API should
be used.
Signed-off-by: Christopher Friedt <cfriedt@meta.com>
Previously, the POSIX shell utilities were intermixed with the
POSIX API implementation.
The POSIX shell utilities only depend on the public POSIX API,
so it makes sense to keep them in a separate subdirectory.
Signed-off-by: Christopher Friedt <cfriedt@meta.com>
Setup rx-clock-source for XIP flash. When running from RAM, the FLEXSPI2
attached SIP flash will be reconfigured, so we must ensure the
configuration used for it is valid.
Signed-off-by: Daniel DeGrasse <daniel.degrasse@nxp.com>
Support SFDP probe in flexspi nor driver. This probe will allow the
flash driver to dynamically configure quad spi flashes for 1-4-4 mode,
expanding the flash chips supported with this driver.
The following data is read from the SFDP header:
- quad enable method
- fast read command (1-4-4 is maximum supported)
Fixes#55379
Signed-off-by: Daniel DeGrasse <daniel.degrasse@nxp.com>
Add support for reclocking flexspi in ccm_rev2 driver. Clock update
functions are provided for the RT11xx.
Signed-off-by: Daniel DeGrasse <daniel.degrasse@nxp.com>
Add support for reclocking the FlexSPI on NXP iMX RT10XX. This
functionality requires an SOC specific clock function to set
the clock rate, since the FlexSPI must be reset directly
before applying the new clock frequency.
Note that all clock constants are defined in this commit, since the
memc flexspi driver now depends on a clock node being present.
Signed-off-by: Daniel DeGrasse <daniel.degrasse@nxp.com>
The get_val functions will now return -ENODATA in case that
a value isn't found, instead of 0.
This makes them more similar to the meta_get_val functions.
Signed-off-by: Emil Gydesen <emil.gydesen@nordicsemi.no>
Added USB Audio output for the Broadcast Sink sample. In addition
offloading of the LC3 codec was also made. The sample supports only
mono, and a KConfig option was added to configure which audio
location to sync to.
Signed-off-by: Fredrik Danebjer <frdn@demant.com>
Add support for ADI EVAL-ADIN2111EBZ.
Tested samples:
* hello_world
* blinky
* dhcpv4_client
Co-developed-by: Philip Molloy <pmolloy@baylibre.com>
Signed-off-by: Philip Molloy <pmolloy@baylibre.com>
Signed-off-by: Angelo Dureghello <adureghello@baylibre.com>
Add support for ADI EVAL-ADIN1110EBZ.
Tested samples:
* hello_world
* blinky
* dhcpv4_client
* adt7420
Tested proper SPI detection of the ADIN1110 chip.
Co-developed-by: Philip Molloy <pmolloy@baylibre.com>
Signed-off-by: Philip Molloy <pmolloy@baylibre.com>
Signed-off-by: Angelo Dureghello <adureghello@baylibre.com>
Microchip's PolarFire SoC interface with on-board spi
nor flash via system controller. This on-board spi nor flash can be
used to store FPGA design bitstream's.
Signed-off-by: Harshit Agarwal <harshit.agarwal@microchip.com>
qemu_x86_tiny@768 has coverage enabled by default. Because of
this, it requires more stack space for running tests.
The increases needed are verified via twister.
Fixes#68272
Signed-off-by: Daniel Leung <daniel.leung@intel.com>
Adds the CAP Commander Change Volume Offset procedure.
This procedure changes the volume offset on one or more
CAP Acceptors, but not to the same value (unlike the
volume change procedure).
Signed-off-by: Emil Gydesen <emil.gydesen@nordicsemi.no>
