This test is failing on platforms requiring a bigger stack size. This
issue is fixed by adding the missing CONFIG_TEST_EXTRA_STACKSIZE to
tweak the thread stack size.
Signed-off-by: Carlo Caione <ccaione@baylibre.com>
By adding new SoC to Zephyr drivers has to be updated.
Commit affects:
- USB driver
- support for nRF52833 added.
- support for USB_DEVICE_REMOTE_WAKEUP in hid-mouse added.
- SPI
- IEEE 802.15.4
- CLOCK CONTROL
Signed-off-by: Emil Obalski <emil.obalski@nordicsemi.no>
Several macros were documented as deprecated but lacked the
infrastructure to produce deprecation warnings. Add the deprecation
marker, and fix the in-tree references to the deprecated spellings.
Note that one non-deprecated macro should have been deprecated, and
is, referring to a newly added line control bit.
Signed-off-by: Peter A. Bigot <pab@pabigot.com>
Use this short header style in all Kconfig files:
# <description>
# <copyright>
# <license>
...
Also change all <description>s from
# Kconfig[.extension] - Foo-related options
to just
# Foo-related options
It's clear enough that it's about Kconfig.
The <description> cleanup was done with this command, along with some
manual cleanup (big letter at the start, etc.)
git ls-files '*Kconfig*' | \
xargs sed -i -E '1 s/#\s*Kconfig[\w.-]*\s*-\s*/# /'
Signed-off-by: Ulf Magnusson <Ulf.Magnusson@nordicsemi.no>
convert sample and test yaml filters that utilize a DT_ define to
instead use a dt_ function. The intent is to remove the Kconfig
generated DT defines and just make directy queries into the device tree.
Signed-off-by: Kumar Gala <kumar.gala@linaro.org>
add sample for syst format output to prove the output can be
decoded by the existing decoder.
Fixes: #19841.
Signed-off-by: Wentong Wu <wentong.wu@intel.com>
There are two set of code supporting x86_64: x86_64 using x32 ABI,
and x86 long mode, and this consolidates both into one x86_64
architecture and SoC supporting truly 64-bit mode.
() Removes the x86_64:x32 architecture and SoC, and replaces
them with the existing x86 long mode arch and SoC.
() Replace qemu_x86_64 with qemu_x86_long as qemu_x86_64.
() Updates samples and tests to remove reference to
qemu_x86_long.
() Renames CONFIG_X86_LONGMODE to CONFIG_X86_64.
Signed-off-by: Daniel Leung <daniel.leung@intel.com>
Configures the default instance of the sdhc driver for the
mimxrt1050_evk board so applications don't have to configure it
explicitly. Similarly, enables the gpio instance required by the sdhc
driver.
Signed-off-by: Maureen Helm <maureen.helm@nxp.com>
Configures the default sdhc driver for the imx rt soc series so
applications don't have to configure it explicitly.
Signed-off-by: Maureen Helm <maureen.helm@nxp.com>
Configures the default sdhc disk volume name to "SD" when fatfs is
enabled. This prevents applications from having to configure it
explicitly.
Signed-off-by: Maureen Helm <maureen.helm@nxp.com>
The hexdump was earlier printed using 8 bytes in one line like this
[00:00:00.131,143] <wrn> sample_instance.inst2: Example of hexdump:
01 02 03 04 05 06 07 08 |........
09 0a 0b 0c 0d 0e 0f 10 |........
11 12 13 14 15 16 17 18 |........
19 1a 1b 1c 1d 1e 1f 20 |.......
21 22 |!"
This is not utilizing the width of the output best way possible.
Better utilization of the output is to print 16 bytes in one line
like this:
[00:00:00.131,136] <wrn> sample_instance.inst2: Example of hexdump:
01 02 03 04 05 06 07 08 09 0a 0b 0c 0d 0e 0f 10 |........ ........
11 12 13 14 15 16 17 18 19 1a 1b 1c 1d 1e 1f 20 |........ .......
21 22 |!"
In order to make it easier to find / calculate the bytes in the
output, print the output bytes in 8 byte groups.
This has the benefit that it is easier to map the Zephyr hex output
to Wireshark output which prints the bytes like this.
Signed-off-by: Jukka Rissanen <jukka.rissanen@linux.intel.com>
Re-run with updated script to convert integer literal delay arguments
to k_thread_create and K_THREAD_DEFINE to use the standard timeout
macros.
Signed-off-by: Peter Bigot <peter.bigot@nordicsemi.no>
Re-run with updated script to convert integer literal delay arguments to
k_sleep to use the standard timeout macros.
Signed-off-by: Peter Bigot <peter.bigot@nordicsemi.no>
Application board.overlay files tend to be paired with
boards/board.conf files that extend the functionality of a board.
Move the overlay files to the same location as the config files that
they work with.
A few overlay files that are paired with a prj_board.conf file in the
application root directory are left in place.
Signed-off-by: Peter Bigot <peter.bigot@nordicsemi.no>
Add console testing harness for expected output. This allows us
to validate that the test is running properly on hardware.
We expect output of the form:
Master core received a message: 1
Master core received a message: 3
Master core received a message: 5
...
Master core received a message: 95
Master core received a message: 97
Master core received a message: 99
OpenAMP demo ended.
Signed-off-by: Kumar Gala <kumar.gala@linaro.org>
Add console testing harness for expected output. This allows us
to validate that the test is running properly on hardware.
We expect output of the form:
Hello World from MASTER! ARM
Received: 1
Received: 2
Received: 3
...
Received: 20
Received: 21
Received: 22
...
Signed-off-by: Kumar Gala <kumar.gala@linaro.org>
While trying out the hello_world sample built for QEMU, I was expecting
the sample app to exit and I'd return to a command prompt. Nope. You
need to exit QEMU manually, so add that step to the sample instructions.
Looking around, there are more uses of QEMU like this that could use
this added step after running the sample app.
Signed-off-by: David B. Kinder <david.b.kinder@intel.com>
This commit extends existing logging sample in order to present
logger usage from user mode thread.
Signed-off-by: Andrew Boie <andrew.p.boie@intel.com>
Signed-off-by: Piotr Zięcik <piotr.ziecik@nordicsemi.no>
Match the logging changes made in samples/.../usb/cdc_acm to the
cdc_acm_composite sample. This allows any device testing checks to work
properly.
Signed-off-by: Kumar Gala <kumar.gala@linaro.org>
Add console testing harness for expected output. This allows us
to validate that the test is running properly on hardware.
We expect output of the form (the Reboot_counter will increment
overtime).
Id: 1, Address: 192.168.1.1
Id: 2, Key: ff fe fd fc fb fa f9 f8
Id: 3, Reboot_counter: 5
Id: 4, Data: DATA
Id: 5, Longarray: 0 1 2 3 4 5 6 7 8 9 ... 7f
Signed-off-by: Kumar Gala <kumar.gala@linaro.org>
Use LOG_LEVEL_INF as defautl log level and use LOG_INF
for important messages. Relax while loop and
give CPU resources to low priority threads like logging.
Signed-off-by: Johann Fischer <j.fischer@phytec.de>
Mark harness as TBD as we haven't defined how to test/validate this
sample on real hardware. As such marking it 'harness: TBD' will get it
skipped from being attempted to run on hardware via --device-testing
Signed-off-by: Kumar Gala <kumar.gala@linaro.org>
Was "pkconfig", which may confuse users whether some different tool
than the standard pkgconfig is meant.
Signed-off-by: Paul Sokolovsky <paul.sokolovsky@linaro.org>
Consistently place C++ use of extern "C" after all include directives,
within the negative branch of _ASMLANGUAGE if used.
Background from issue #17997:
Declarations that use C linkage should be placed within extern "C"
so the language linkage is correct when the header is included by
a C++ compiler.
Similarly #include directives should be outside the extern "C" to
ensure the language-specific default linkage is applied to any
declarations provided by the included header.
See: https://en.cppreference.com/w/cpp/language/language_linkage
Signed-off-by: Peter Bigot <peter.bigot@nordicsemi.no>
There's desire to be able to customize parameters on a per-filesystem
basis, which means we need a way to override the Kconfig defaults which
are global. This also means the littlefs data structure cannot own the
cache and lookahead buffers.
Switch to using a macro to define the littlefs data structure. The
default version uses the Kconfig constants. A custom one takes
arguments providing the most likely partition-specific parameters.
Finally the user is free to bypass the helper macros and set any
parameters desired, though validation is limited and only present when
CONFIG_DEBUG is enabled.
Extend the test suite with a performance module, which confirms that
these settings have an impact proportional to the log of changes to the
cache or IO sizes.
Signed-off-by: Peter A. Bigot <pab@pabigot.com>
Add support for the littlefs file system in the fs shell. Update
the sample to use the same partition configuration as the littlefs
example for the SPI NOR test platform.
Signed-off-by: Peter A. Bigot <pab@pabigot.com>
Error codes are listed in header files and in the core spec as hex
values. Always print them in hex in debug for easier error code
checking.
Signed-off-by: Joakim Andersson <joakim.andersson@nordicsemi.no>
This board and SoC was discontinued some time ago and is currently not
maintained in the zephyr tree.
Remove all associated configurations and variants from the tree.
Signed-off-by: Anas Nashif <anas.nashif@intel.com>
This board and SoC was discontinued some time ago and is currently not
maintained in the zephyr tree.
Remove all associated configurations and variants from the tree.
Signed-off-by: Anas Nashif <anas.nashif@intel.com>
On some SoCs the frequency of the system clock is obtained at run time
as the exact configuration of the hardware is not known at compile time.
On such platforms using CONFIG_SYS_CLOCK_HW_CYCLES_PER_SEC define
directly introduces timing errors.
This commit replaces CONFIG_SYS_CLOCK_HW_CYCLES_PER_SEC by the call
to inline function sys_clock_hw_cycles_per_sec() which always returns
correct frequency of the system clock.
Signed-off-by: Piotr Zięcik <piotr.ziecik@nordicsemi.no>
After the removal of the virtualcom DT node in 5071eee, using the chosen
node is no longer functional. Instead the Kconfig
CONFIG_UART_CONSOLE_ON_DEV_NAME is used to locate the correct UART.
Signed-off-by: Carles Cufi <carles.cufi@nordicsemi.no>
Updated fs shell sample readme to state the requirement of a 32-bit
version of libfuse while building for native_posix board
Signed-off-by: Jan Van Winkel <jan.van_winkel@dxplore.eu>
Sample applications for display functions do not work on native_posix_64
due to missing overrides. Clone the native_posix_64 Kconfig override
for all samples that have a native_posix Kconfig override.
Signed-off-by: Peter A. Bigot <pab@pabigot.com>
The name disk_access_sdhc.c is ambiguous,
actually this driver depends on SPI,
rename this file.
In addition, move the generic sdhc stuff from C file
to head file for other sdhc drivers to use.
1) disk_access_sdhc.c->disk_access_spi_sdhc.c.
2) create .h and move sdhc specifications from .c to .h.
Signed-off-by: Jun Yang <jun.yang@nxp.com>
We use the following commands to rename any
LED._GPIO_{CONTROLLER,PIN,FLAGS} to
DT_ALIAS_LED._GPIOS_{CONTROLLER,PIN,FLAGS}
git grep -l LED._GPIO_CONTROLLER | xargs sed -i 's/LED\(.\)_GPIO_CONTROLLER/DT_ALIAS_LED\1_GPIOS_CONTROLLER/g'
git grep -l LED._GPIO_PIN | xargs sed -i 's/LED\(.\)_GPIO_PIN/DT_ALIAS_LED\1_GPIOS_PIN/g'
git grep -l LED._GPIO_FLAGS | xargs sed -i 's/LED\(.\)_GPIO_FLAGS/DT_ALIAS_LED\1_GPIOS_FLAGS/g'
Signed-off-by: Kumar Gala <kumar.gala@linaro.org>
We use the following commands to rename any
SW._GPIO_{CONTROLLER,PIN,FLAGS} to
DT_ALIAS_SW._GPIOS_{CONTROLLER,PIN,FLAGS}
git grep -l SW._GPIO_CONTROLLER | xargs sed -i 's/SW\(.\)_GPIO_CONTROLLER/DT_ALIAS_SW\1_GPIOS_CONTROLLER/g'
git grep -l SW._GPIO_PIN | xargs sed -i 's/SW\(.\)_GPIO_PIN/DT_ALIAS_SW\1_GPIOS_PIN/g'
git grep -l SW._GPIO_FLAGS | xargs sed -i 's/SW\(.\)_GPIO_FLAGS/DT_ALIAS_SW\1_GPIOS_FLAGS/g'
Signed-off-by: Kumar Gala <kumar.gala@linaro.org>
move misc/reboot.h to power/reboot.h and
create a shim for backward-compatibility.
No functional changes to the headers.
A warning in the shim can be controlled with CONFIG_COMPAT_INCLUDES.
Related to #16539
Signed-off-by: Anas Nashif <anas.nashif@intel.com>
move misc/util.h to sys/util.h and
create a shim for backward-compatibility.
No functional changes to the headers.
A warning in the shim can be controlled with CONFIG_COMPAT_INCLUDES.
Related to #16539
Signed-off-by: Anas Nashif <anas.nashif@intel.com>
move misc/printk.h to sys/printk.h and
create a shim for backward-compatibility.
No functional changes to the headers.
A warning in the shim can be controlled with CONFIG_COMPAT_INCLUDES.
Related to #16539
Signed-off-by: Anas Nashif <anas.nashif@intel.com>
move misc/byteorder.h to sys/byteorder.h and
create a shim for backward-compatibility.
No functional changes to the headers.
A warning in the shim can be controlled with CONFIG_COMPAT_INCLUDES.
Related to #16539
Signed-off-by: Anas Nashif <anas.nashif@intel.com>
move ring_buffer.h to sys/ring_buffer.h and
create a shim for backward-compatibility.
No functional changes to the headers.
A warning in the shim can be controlled with CONFIG_COMPAT_INCLUDES.
Related to #16539
Signed-off-by: Anas Nashif <anas.nashif@intel.com>
move uart.h to drivers/uart.h and
create a shim for backward-compatibility.
No functional changes to the headers.
A warning in the shim can be controlled with CONFIG_COMPAT_INCLUDES.
Related to #16539
Signed-off-by: Anas Nashif <anas.nashif@intel.com>
move ipm.h to drivers/ipm.h and
create a shim for backward-compatibility.
No functional changes to the headers.
A warning in the shim can be controlled with CONFIG_COMPAT_INCLUDES.
Related to #16539
Signed-off-by: Anas Nashif <anas.nashif@intel.com>
move gpio.h to drivers/gpio.h and
create a shim for backward-compatibility.
No functional changes to the headers.
A warning in the shim can be controlled with CONFIG_COMPAT_INCLUDES.
Related to #16539
Signed-off-by: Anas Nashif <anas.nashif@intel.com>
move flash.h to drivers/flash.h and
create a shim for backward-compatibility.
No functional changes to the headers.
A warning in the shim can be controlled with CONFIG_COMPAT_INCLUDES.
Related to #16539
Signed-off-by: Anas Nashif <anas.nashif@intel.com>
move disk_access.h to disk/disk_access.h and
create a shim for backward-compatibility.
No functional changes to the headers.
A warning in the shim can be controlled with CONFIG_COMPAT_INCLUDES.
Related to #16539
Signed-off-by: Anas Nashif <anas.nashif@intel.com>
move stats.h to stats/stats.h and
create a shim for backward-compatibility.
No functional changes to the headers.
A warning in the shim can be controlled with CONFIG_COMPAT_INCLUDES.
Related to #16539
Signed-off-by: Anas Nashif <anas.nashif@intel.com>
move nvs/nvs.h to fs/nvs.h and
create a shim for backward-compatibility.
No functional changes to the headers.
A warning in the shim can be controlled with CONFIG_COMPAT_INCLUDES.
Related to #16539
Signed-off-by: Anas Nashif <anas.nashif@intel.com>
move fs.h to fs/fs.h and
create a shim for backward-compatibility.
No functional changes to the headers.
A warning in the shim can be controlled with CONFIG_COMPAT_INCLUDES.
Related to #16539
Signed-off-by: Anas Nashif <anas.nashif@intel.com>
move console.h to console/console.h and
create a shim for backward-compatibility.
No functional changes to the headers.
A warning in the shim can be controlled with CONFIG_COMPAT_INCLUDES.
Related to #16539
Signed-off-by: Anas Nashif <anas.nashif@intel.com>
USBD_CFG_DATA_DEFINE macro has not consider that a class
could have more than one set of usb_cfg_data struct.
If a class has more than one set of usb_cfg_data
then they should be sorted the same way like by
USBD_DEVICE_DESCR_DEFINE macro.
Fixes: #16240
Signed-off-by: Johann Fischer <j.fischer@phytec.de>
This patch removes the "hard" selection of the USB_DEVICE_REMOTE_WAKEUP
Kconfig option for USB devices made on the nRF52840 SoC. Now it's up to
the application to decide if it wants to enable the option. This change
makes it possible to pass the USB3CV Chapter 9 Tests for applications
that don't use the remote wakeup feature, since when a USB device only
reports that it supports this feature, and the mentioned option makes
it to do so, one of the test cases expects the USB device to actually
perform the remote wakeup. And when the feature is not reported as
supported, the test case is skipped.
Signed-off-by: Andrzej Głąbek <andrzej.glabek@nordicsemi.no>
This sample has to be operated manually (it's a USB DFU implementation
that needs to be plugged into a host to validate). Sanitycheck is
failing right now becuase it tries to flash and run it, and doesn't
see a harness declaration.
Set it to build_only when run under sanitycheck.
Signed-off-by: Andy Ross <andrew.j.ross@intel.com>
Right now this fails needlessly under sanitycheck for lack of a
harness declaration. It's short, just stuff in a simple regex check.
Signed-off-by: Andy Ross <andrew.j.ross@intel.com>
YAML document separators are needed e.g. when doing
$ cat doc1.yaml doc2.yaml | <parser>
For the bindings, we never parse concatenated documents. Assume we don't
for any other .yaml files either.
Having document separators in e.g. base.yaml makes !include a bit
confusing, since the !included files are merged and not separate
documents (the merging is done in Python code though, so it makes no
difference for behavior).
The replacement was done with
$ git ls-files '*.yaml' | \
xargs sed -i -e '${/\s*\.\.\.\s*/d;}' -e 's/^\s*---\s*$//'
First pattern removes ... at the end of files, second pattern clears a
line with a lone --- on it.
Some redundant blank lines at the end of files were cleared with
$ git ls-files '*.yaml' | xargs sed -i '${/^\s*$/d}'
This is more about making sure people can understand why every part of a
binding is there than about removing some text.
Signed-off-by: Ulf Magnusson <Ulf.Magnusson@nordicsemi.no>
Fix misspellings and doc issues missed during regular reviews (including
some files without a trailing newline)
Signed-off-by: David B. Kinder <david.b.kinder@intel.com>
The DT spec. only has "okay" and not "ok". The Linux kernel has around
12k "okay"s and 300 "ok"s.
The scripts/dts scripts only check for "disabled", so should be safe re.
those at least.
The replacement was done with
git ls-files | xargs sed -i 's/status\s*=\s*"ok"/status = "okay"/'
Signed-off-by: Ulf Magnusson <Ulf.Magnusson@nordicsemi.no>
Change code from using now deprecated DT_<COMPAT>_<INSTANCE>_<PROP>
defines to using DT_INST_<INSTANCE>_<COMPAT>_<PROP>.
Signed-off-by: Kumar Gala <kumar.gala@linaro.org>
Cleanup references to boards in some of the example and use the same
boards through the examples. Other minot cleanups and make the text more
generic and not specific to certain boards.
Signed-off-by: Anas Nashif <anas.nashif@intel.com>
Per guidelines, all statements should have braces around them. We do not
have a CI check for this, so a few went in unnoticed.
Signed-off-by: Anas Nashif <anas.nashif@intel.com>
It does make sense to initialize USB console after USB Device stack.
Note that the value is selected only if we specify USB_UART_CONSOLE
in prj.conf, not in menuconfig afterwards.
Fixes#16518
Signed-off-by: Andrei Emeltchenko <andrei.emeltchenko@intel.com>
This allows setting a custom pointer to be passed back to the complete
callback at expense of increasing the buffers in 4 bytes.
Signed-off-by: Luiz Augusto von Dentz <luiz.von.dentz@intel.com>
Remove duplicated execution path for composite configuration, USB
device stack initialization is done inside stack for both cases.
Signed-off-by: Andrei Emeltchenko <andrei.emeltchenko@intel.com>
In order to unify the legacy and composite code, move the class and
vendor request handler buffer into the USB device code, just like in
composite mode. The option is renamed from USB_COMPOSITE_BUFFER_SIZE
into USB_REQUEST_BUFFER_SIZE and also replaces the USB_DFU_MAX_XFER_SIZE
and USB_HID_MAX_PAYLOAD_SIZE options.
Signed-off-by: Aurelien Jarno <aurelien@aurel32.net>
Signed-off-by: Andrei Emeltchenko <andrei.emeltchenko@intel.com>
Sample walk through:
1. CPU 0 will wake up CPU 1 after initialization
2. CPU 1 will send to CPU 0 an interrupt over MHU0
3. CPU 0 return the same to CPU 1 when received MHU0 interrupt
4. Test done when CPU 1 received MHU0 interrupt
The wake up second core and private core ID are soc specific.
Signed-off-by: Karl Zhang <karl.zhang@linaro.org>
Added .inf driver file for Windows.
CDC examples will now work on Windows.
Note:
This .inf is not signed and may cause problems during installation.
Signed-off-by: Marcin Szymczyk <Marcin.Szymczyk@nordicsemi.no>
Unique PID is required for each sample in order
to be recognized by host.
When creating a new sample:
- Add USB_PID_<SAMPLE_NAME>_SAMPLE
in samples/subsys/usb/usb_pid.Kconfig
- Create Kconfig file in your sample's subdirectory, containing:
config USB_DEVICE_PID
default USB_PID_<SAMPLE_NAME>_SAMPLE
source "Kconfig.zephyr"
Signed-off-by: Marcin Szymczyk <Marcin.Szymczyk@nordicsemi.no>
Adds required Kconfig options for flash driver.
Adds FatFS filesystem for flash disk.
Fixes#14459.
Note: As USB MSC does not support multiple disks (see #14937),
only one (flash by default, modify CONFIG_MASS_STORAGE_DISK_NAME
to "RAM" for RAM disk) will appear to host.
Signed-off-by: Marcin Szymczyk <Marcin.Szymczyk@nordicsemi.no>
To support mass storage over USB in RAM we need a board with
sufficient RAM. Fix failing tests for boards with low memory.
Signed-off-by: Andrei Emeltchenko <andrei.emeltchenko@intel.com>
Enable harness so we can execute smoke tests on the hardware with
command line:
sanitycheck --device-testing --device-serial /dev/ttyACM0 -p <BOARD>
-T samples/subsys/usb/hid
Signed-off-by: Andrei Emeltchenko <andrei.emeltchenko@intel.com>
Add config overlay for cdc_acm+dfu composite configuration.
Manual configuration over menuconfig may be error-prone for
the user because then FLASH_LOAD_OFFSET and FLASH_LOAD_SIZE
should also to be set to appropriate values.
Signed-off-by: Johann Fischer <j.fischer@phytec.de>
Update the files which contain no license information with the
'Apache-2.0' SPDX license identifier. Many source files in the tree are
missing licensing information, which makes it harder for compliance
tools to determine the correct license.
By default all files without license information are under the default
license of Zephyr, which is Apache version 2.
Signed-off-by: Anas Nashif <anas.nashif@intel.com>
Merge cb_usb_status_composite and cb_usb_status and use common
forward_status_cb for both composite and normal devices.
Fixes#14882
Signed-off-by: Andrei Emeltchenko <andrei.emeltchenko@intel.com>
Instead of relying on overlays which requires to write overlay for
every board (100+) define console device name.
Fixes#14698
Signed-off-by: Andrei Emeltchenko <andrei.emeltchenko@intel.com>
If there are several queued interrupts we can miss some of them. Use
while() loop to catch them all.
Signed-off-by: Andrei Emeltchenko <andrei.emeltchenko@intel.com>
Linking to API material requires knowing the pecularities of how
doxygen, sphinx, and breathe work. In an attempt to hide some of this
we're preparing the current docs to allow use of configuration defaults
that will let us more simply use a default role that will hunt for a
reference target in the various domains that are available by using a
default "role" of "all". This will let us use the simple notation
`functionname` or `typename` without fully specifying the reference as
:c:func:`functionname`.
This patch cleans up exising docs that were (incorrectly) using single
backtics where double backtics should have been used, and also found
some typos (such as a space between the role name and the reference,
such as :file: `filename`, and a missing colon such as
c:func:`functionname`)
This is a start to address issue #14313
Signed-off-by: David B. Kinder <david.b.kinder@intel.com>
Added a warning that will abort build without disks.
Added a default configuration for nrf52840_pca10056.
Signed-off-by: Marcin Szymczyk <Marcin.Szymczyk@nordicsemi.no>
A new role :zephyr_file: is available that renders to a link to the file
or folder in GitHub. Find appropriate references using :file: and
convert to :zephyr_file: to take advantage of its linking capability.
Signed-off-by: David B. Kinder <david.b.kinder@intel.com>
This example combines 2 HID classes and 2 CDC ACM classes to create
a composite, multi-instance device.
Signed-off-by: Marcin Szymczyk <Marcin.Szymczyk@nordicsemi.no>
We are doing math of two 32-bit numbers and assigning into a 64-bit
result. Add explicit cast of one of the values being multipled to get
explicit promotion.
Fixes: #13883
Coverity CID: 190930
Signed-off-by: Kumar Gala <kumar.gala@linaro.org>
The return from ipm_set_enabled wasn't assigned to 'status' so the check
right after the call to ipm_set_enabled() wasn't doing the right thing.
Fixes: #13881
Coverity CID: 190932
Signed-off-by: Kumar Gala <kumar.gala@linaro.org>
Added support for remote wakeup in hid_mouse example.
If rempote wakeup support is enabled, wakeup request
is performed on every button click when the bus in suspended state.
Signed-off-by: Paweł Zadrożniak <pawel.zadrozniak@nordicsemi.no>
This patch removes the free space calculation from nvs initialization.
The available space can be calculated if required using the routine
nvs_calc_free_space.
This patch also removes the locked state of nvs, it is not possible to
get in a locked state.
This patch adds an extra check on the sector_size configuration and only
allows operation on nvs when nvs has been initialized.
This patch also solves issue #13369, the usage of FLASH_ERASE_BLOCK_SIZE
has been replaced with the flash page api.
Changes:
Removed locked state and free_space from the nvs structure.
nvs_reinit(): has been replaced with by an internal only function
_nvs_startup().
nvs_write(): removed the possibility to place the file system in a
locked state, if to many gc operations are required it will return
-ENOSPC.
ssize_t nvs_calc_free_space(): introduced, calculates the free space
that is available in the nvs file system.
Removed define LOG_LEVEL.
Rebased to current master.
Signed-off-by: Laczen JMS <laczenjms@gmail.com>
Reverted unwanted documentation change on usb dfu sample.
Changes was introduce accidentally within PR #13475
Signed-off-by: Andrzej Puzdrowski <andrzej.puzdrowski@nordicsemi.no>
Macros are replaced by C++ friendly versions:
- SHELL_CREATE_STATIC_SUBCMD_SET by SHELL_STATIC_SUBCMD_SET_CREATE
- SHELL_CREATE_DYNAMIC_CMD by SHELL_DYNAMIC_CMD_CREATE
Signed-off-by: Krzysztof Chruscinski <krzysztof.chruscinski@nordicsemi.no>
It is planned to deprecate SHELL_CREATE_STATIC_SUBCMD_SET macro
which is replaced by SHELL_STATIC_SUBCMD_SET_CREATE.
Additionally, removed irrelevant comments about alphabetical
ordering which is no longer needed.
Signed-off-by: Krzysztof Chruscinski <krzysztof.chruscinski@nordicsemi.no>
This function conflicts with a function of the same name in mcuboot.
This happens when building USB DFU support into mcuboot.
DFU over USB uses image manager and mcuboot internals to manage images
downloaded to the device.
Signed-off-by: Anas Nashif <anas.nashif@intel.com>
If nvs sample is run once until max reboot value, the next time it is is
ran on the same board, it will not behave as expected as code will
read reboot counter set to max value and will stop there.
In order to avoid the operation to wipe the flash manually between
2 runs of the test, add a clean termination to the test by resetting
the reboot counter before exiting.
Signed-off-by: Erwan Gouriou <erwan.gouriou@linaro.org>
Use DT_FLASH_ERASE_BLOCK_SIZE prefixed defined instead of
FLASH_ERASE_BLOCK_SIZE as the non-DT version is deprecated.
Signed-off-by: Kumar Gala <kumar.gala@linaro.org>
The code has been using non DT_ prefixed defines for DT generated
defines. Switch to use DT_ prefixed ones as we want to deprecated
the non DT_ prefixed defines.
Signed-off-by: Kumar Gala <kumar.gala@linaro.org>
Shell will store only pointer to the prompt string instead of
copying it to the RAM buffer. It will save RAM memory and
it will simplify implementation of a new feature: "select"
command. When a command will be selected than shell will
display command syntax as a prompt.
Removed obsolete ASSERT check in a static function.
Signed-off-by: Jakub Rzeszutko <jakub.rzeszutko@nordicsemi.no>
Add sample creating 2 serial USB ports and establishing communication
between those 2 ports.
Signed-off-by: Andrei Emeltchenko <andrei.emeltchenko@intel.com>
Added sample to show disk access and FS api with
Fat filesystem and SDHC driver. Tested working with
nrf52840 (blip).
Signed-off-by: Tavish Naruka <docuser@docs.electronut.in>
Add section for build sanity check configuration with
CONFIG_USB_COMPOSITE_DEVICE enabled.
Signed-off-by: Andrei Emeltchenko <andrei.emeltchenko@intel.com>
Add configuration for creating composite USB device with CDC ACM and
Mass Storage functions.
Signed-off-by: Andrei Emeltchenko <andrei.emeltchenko@intel.com>
New shell does not need either CONFIG_UART_CONSOLE
or interrupts support to be working. Only CONFIG_SERIAL
in combination with CONFIG_UART_SHELL_ON_DEV_NAME are required.
Updated sample yaml file accordingly.
Signed-off-by: Jakub Rzeszutko <jakub.rzeszutko@nordicsemi.no>
The removed test does the same thing and runs on the same platforms
as already existing samples/boards/nrf52/power_mgr.
Signed-off-by: Piotr Zięcik <piotr.ziecik@nordicsemi.no>
The v2018.10 release of OpenAMP reworks the API set and splits the
remoteproc vs rpmsg interfaces so one can use rpmsg without remoteproc.
This helps drastically reduce the code footprint utilized by OpenAMP.
The remote see around 4k reduction in code size.
Signed-off-by: Kumar Gala <kumar.gala@linaro.org>
Removed foreground command functionality from shell source files.
Removed associated example.
Removed enter/exit command functions from the Bluetooth example
Updated project config files.
Signed-off-by: Jakub Rzeszutko <jakub.rzeszutko@nordicsemi.no>
Legacy shell removed in order to avoid maintaining two shells
systems.
All examples and tests have been migrated to the new shell.
Signed-off-by: Jakub Rzeszutko <jakub.rzeszutko@nordicsemi.no>
Disabled the CONFIG_COVERAGE for benchmarks and other tests.
This is needed because it interferes with normal behavior of the
test case.
Signed-off-by: Adithya Baglody <adithya.nagaraj.baglody@intel.com>
Signed-off-by: Anas Nashif <anas.nashif@intel.com>
This patch adds a x86_64 architecture and qemu_x86_64 board to Zephyr.
Only the basic architecture support needed to run 64 bit code is
added; no drivers are added, though a low-level console exists and is
wired to printk().
The support is built on top of a "X86 underkernel" layer, which can be
built in isolation as a unit test on a Linux host.
Limitations:
+ Right now the SDK lacks an x86_64 toolchain. The build will fall
back to a host toolchain if it finds no cross compiler defined,
which is tested to work on gcc 8.2.1 right now.
+ No x87/SSE/AVX usage is allowed. This is a stronger limitation than
other architectures where the instructions work from one thread even
if the context switch code doesn't support it. We are passing
-no-sse to prevent gcc from automatically generating SSE
instructions for non-floating-point purposes, which has the side
effect of changing the ABI. Future work to handle the FPU registers
will need to be combined with an "application" ABI distinct from the
kernel one (or just to require USERSPACE).
+ Paging is enabled (it has to be in long mode), but is a 1:1 mapping
of all memory. No MMU/USERSPACE support yet.
+ We are building with -mno-red-zone for stack size reasons, but this
is a valuable optimization. Enabling it requires automatic stack
switching, which requires a TSS, which means it has to happen after
MMU support.
+ The OS runs in 64 bit mode, but for compatibility reasons is
compiled to the 32 bit "X32" ABI. So while the full 64 bit
registers and instruction set are available, C pointers are 32 bits
long and Zephyr is constrained to run in the bottom 4G of memory.
Signed-off-by: Andy Ross <andrew.j.ross@intel.com>
Added macro that generates simple report descriptor for mouse.
This improves the readability of hid-mouse sample.
Signed-off-by: Marcin Szymczyk <Marcin.Szymczyk@nordicsemi.no>
Move to latest cmake version with many bug fixes and enhancements.
Signed-off-by: Anas Nashif <anas.nashif@intel.com>
Signed-off-by: Carles Cufi <carles.cufi@nordicsemi.no>
Exteneded shell sample with example how to use shell_fprintf from
any context with 'foreground' command.
Signed-off-by: Krzysztof Chruscinski <krzysztof.chruscinski@nordicsemi.no>
Removed get_report_cb as it was an incorrect implementation
of Get_Report request. Correct response would be returning
current report value, not report descriptor.
Signed-off-by: Marcin Szymczyk <Marcin.Szymczyk@nordicsemi.no>
Added right button, X and Y axis movement to HID mouse example.
Enabled only if board has enough buttons.
Added LED toggling notification when report is sent.
Signed-off-by: Marcin Szymczyk <Marcin.Szymczyk@nordicsemi.no>
1. Created new shell module: shell_help.
2. Simplified command handlers with new shell print macros.
3. Removed help functions from command handlers.
Signed-off-by: Jakub Rzeszutko <jakub.rzeszutko@nordicsemi.no>
Removed printing command help from help handler. It is now
realized by the shell engine. This change saves a lot of flash
but still allows to print help in command handler with function
shell_help_print.
Signed-off-by: Jakub Rzeszutko <jakub.rzeszutko@nordicsemi.no>
Removing help "options" from shell API.
Currently SHELL_OPT macro is not used by users. What is more
commit: a89690d10f ignores possible options created in
command handler by the user. As a result they are not printed
in help message.
Second, currntly implemented "options" in command handlers options are
implemented without SHELL_OPT macro.
And last but not least this change will allow to implement
help handler in a way that user will not need to think about calling
functions printing help in a command handler.
Signed-off-by: Jakub Rzeszutko <jakub.rzeszutko@nordicsemi.no>
As it stands now, the console effectively works in raw mode, so all
messages should end with "\r\n". This was missed previously, because
the sample was run in QEMU, on top of POSIX cooked console. Running
on real hardware showed this issue.
Signed-off-by: Paul Sokolovsky <paul.sokolovsky@linaro.org>
Idle rate functionality has been implemented for HID USB class.
Bassed on Device Class Definition for Human Interface Devices 1.11.
Tested with USB3CV and host with idle rate.
Signed-off-by: Marcin Szymczyk <Marcin.Szymczyk@nordicsemi.no>
HID class now defaults to universal request callbacks in case they
are not provided by the application. This applies to following,
class-specific requests: Get_Report, Set_Report, Get_Idle, Set_Idle,
Get_Protocol and Set_Protocol.
Tested with USB3CV.
Signed-off-by: Marcin Szymczyk <Marcin.Szymczyk@nordicsemi.no>
Start of Frame events can now be accessed from USB classes.
This will be useful when implementing idle rate functionality.
Signed-off-by: Marcin Szymczyk <Marcin.Szymczyk@nordicsemi.no>
System Power Management is only supported in Tickless Idle mode.
This patch modifies Kconfig dependencies to ensure System Power
Management option selects Tickless Idle one.
Fixes: #11046
Signed-off-by: Piotr Mienkowski <piotr.mienkowski@gmail.com>
Since setting USB console port name is moved to DTS users have
problems enabling it. Notify user that the console is not set.
Fixes#10693
Signed-off-by: Andrei Emeltchenko <andrei.emeltchenko@intel.com>
Adds the virtualcom device to the nrf52840 SoC dts and adds a board
specific nrf52840_overlay.dts file, copied exactly from the
arduino101_overlay.dts file, to set the console device name
appropriately for the subsys/usb/console sample project.
There were no clear alternatives to add a usb_cdc: virtualcom device to
all known SoC devices with USB support as should probably happen.
There was also no clear alternatives to add a non-board specific overlay
to the example.
This fixes a specific problem with the nrf52840-dk board for this sample
project.
Signed-off-by: Tom Burdick <thomas.burdick@gmail.com>
Add IMX IPM sample application. It reads the data sent to the
Messaging Unit and sends them back. It has been tested on Udoo Neo Full
board with the Cortex-A9 core running Linux and sending the data
into the Messaging Unit A and the Cortex-M4 running this sample Zephyr
application and reading the data from Messaging Unit B and sending it
back for Linux side to read it from Messaging Unit A.
Origin: Original
Signed-off-by: Stanislav Poboril <stanislav.poboril@nxp.com>
We have cases with UART drivers where TX interrupt handling is not
bootstrapped properly on enabling them. To make such cases more
obvious, start this sample with console_write(), the output of which
wouldn't appear if that's the case. (Of course, the sample starts
with printk() exlaining what may happpen.)
Signed-off-by: Paul Sokolovsky <paul.sokolovsky@linaro.org>
This commit would add the pull-up or pull-down on the switch pin and
makes it functional on the board where there is no external pull-up.
Signed-off-by: Radoslaw Koppel <radoslaw.koppel@nordicsemi.no>
These changes were obtained by running a script created by
Ulf Magnusson <Ulf.Magnusson@nordicsemi.no> for the following
specification:
1. Read the contents of all dts_fixup.h files in Zephyr
2. Check the left-hand side of the #define macros (i.e. the X in
#define X Y)
3. Check if that name is also the name of a Kconfig option
3.a If it is, then do nothing
3.b If it is not, then replace CONFIG_ with DT_ or add DT_ if it
has neither of these two prefixes
4. Replace the use of the changed #define in the code itself
(.c, .h, .ld)
Additionally, some tweaks had to be added to this script to catch some
of the macros used in the code in a parameterized form, e.g.:
- CONFIG_GPIO_STM32_GPIO##__SUFFIX##_BASE_ADDRESS
- CONFIG_UART_##idx##_TX_PIN
- I2C_SBCON_##_num##_BASE_ADDR
and to prevent adding DT_ prefix to the following symbols:
- FLASH_START
- FLASH_SIZE
- SRAM_START
- SRAM_SIZE
- _ROM_ADDR
- _ROM_SIZE
- _RAM_ADDR
- _RAM_SIZE
which are surprisingly also defined in some dts_fixup.h files.
Finally, some manual corrections had to be done as well:
- name##_IRQ -> DT_##name##_IRQ in uart_stm32.c
Signed-off-by: Andrzej Głąbek <andrzej.glabek@nordicsemi.no>
If shell UART backend was enabled and logger uart backend was
not explicitly disabled then both were used resulting in logs
being printed twice on terminal.
Patch modifies default state of log uart backend to depend on
state of shell uart backend.
Signed-off-by: Krzysztof Chruscinski <krzysztof.chruscinski@nordicsemi.no>
Changed LOG_MODULE_REGISTER and LOG_MODULE_DECLARE macros to take log
level as optional parameter. LOG_MODULE_DECLARE can now also be used
in static inline functions in headers. Added LOG_LEVEL_SET macro
which is used when instance logging API is used to indicate maximal
log level compiled into the file.
Signed-off-by: Krzysztof Chruscinski <krzysztof.chruscinski@nordicsemi.no>
Couple of findings which were revealed after changing
LOG_MODULE_REGISTER macro:
- missing semicolons after LOG_MODULE_REGISTER()
- missing LOG_LEVEL defines
- other
Signed-off-by: Krzysztof Chruscinski <krzysztof.chruscinski@nordicsemi.no>
The USB mass storage documentation was completely outdated. Rewrite it
using reStructuredText, and mentioning the two possible overlays.
Signed-off-by: Aurelien Jarno <aurelien@aurel32.net>
