Add DT overlay to be able to support and test UDC DWC2 driver
(snps,dwc2) on nucleo_f413zh board. This disables STM32 shim
driver described and configured on the SoC and board level.
Obviously,it should work with other STM32F4 boards as well and we
could have a mechanism to apply it generically using snippets.
Signed-off-by: Johann Fischer <johann.fischer@nordicsemi.no>
Update coap_service_send and coap_resource_send to take an optional
pointer argument to the newly introduced coap_transmission_parameters.
Signed-off-by: Pieter De Gendt <pieter.degendt@basalte.be>
This is just as arbitrary as what was before, but simpler.
Before this change, the callback were invoked upon receiving the num
complete packets event.
This did not necessarily work with all spec-compliant controllers.
Now the callback is invoked as soon as the lower layer destroys the
buffer. ATT shouldn't care whether L2CAP sends it over RFC1149 or
something else after that point.
Signed-off-by: Jonathan Rico <jonathan.rico@nordicsemi.no>
Co-authored-by: Aleksander Wasaznik <aleksander.wasaznik@nordicsemi.no>
Why?
- metadata is easier to manage as an array + index
- less error-prone -> less memory-management bugs
- we can. because of the previous refactor
- PDU allocations are more predictable
- ATT buffer size can be optimized by app
- isolates ATT from the rest of the ACL users
- decouples ATT PDU size from e.g. SMP w/ LESC
Drawbacks:
- higher memory usage
- kconfig change
The higher memory use is only temporary, as this will be followed-up
with more refactors that should bring it back down.
Signed-off-by: Jonathan Rico <jonathan.rico@nordicsemi.no>
Co-authored-by: Aleksander Wasaznik <aleksander.wasaznik@nordicsemi.no>
Add README.rst file with description of sample which shows how to use
pytest and Twister together.
Signed-off-by: Piotr Golyzniak <piotr.golyzniak@nordicsemi.no>
Use the common USBD sample initialization helper where new USB device
support has already been added.
Signed-off-by: Johann Fischer <johann.fischer@nordicsemi.no>
There is common code for the new USB device support in the samples to
instantiate USB device, descriptors, configuration and initialize USB
device. Add common code that can be used for the simple usecase with a
single USB device and single configuration.
Signed-off-by: Johann Fischer <johann.fischer@nordicsemi.no>
Renames "prov device" references and options to
"provisionee" to align implementation with Mesh
Protocol specification v1.1, section 5.4.
Signed-off-by: Anders Storrø <anders.storro@nordicsemi.no>
Adds a charge_enable handler to facilitate enabling and disabling
a charge cycle. This deprecates enabling and disable the charge
cycle via the CHARGER_PROP_STATUS property.
Signed-off-by: Ricardo Rivera-Matos <ricardo.rivera-matos@cirrus.com>
Updaye buffer counts and semaphore initial value so that the
Broadcast Audio Source can utilize any use of broadcast
pre-transmissions.
Signed-off-by: Vinayak Kariappa Chettimada <vich@nordicsemi.no>
The issue with non secure storage system has been fixed
in nrf53_ns platform: https://github.com/zephyrproject-rtos/zephyr/issues/59376
No need workarounds anymore.
Signed-off-by: Aleksandr Khromykh <aleksandr.khromykh@nordicsemi.no>
The benchmark sample did not contemplate message subscribers. It adds
the msg subscribers and improves the organization of the project.
Signed-off-by: Rodrigo Peixoto <rodrigopex@gmail.com>
The subsys/logging/logger example can be used to demonstrate how to
use SWO for logging. Add a configuration fragment that enables the
logger's SWO backend. The default SWO frequency in this example is set
to 2 MHz to ensure a well-defined output bit rate instead of the
highest possible.
Signed-off-by: Andreas Sandberg <andreas@sandberg.uk>
Set the prescaler for the stm32_lp_tick_source lptim node.
When the LPTIM is clocked by the LSE with a prescaler
of 16 (lptim freq at 2048Hz) expecting 2048 for the TICKS_PER_SEC.
When the LPTIM is clocked by the LSE with a prescaler
of 32 (lptim freq at 1024Hz) expecting 1024 for the TICKS_PER_SEC.
Signed-off-by: Francois Ramu <francois.ramu@st.com>
Make sure that the flash partition is valid.
With TF-M enabled the storage_partition can be used as memory that is
known to be configured as non-secure flash region.
The slot1_ns_partition partition is only correct when TF-M is built
with BL2 enabled.
Signed-off-by: Joakim Andersson <joakim.andersson@nordicsemi.no>
Print a finished message, so that it is clear that this in the end
of the sample. This makes it certain that we didn't crash without
output on the last test.
Signed-off-by: Joakim Andersson <joakim.andersson@nordicsemi.no>
Stop erasing outside of the test partition.
We shouldn't really on this being accesible memory.
This region may be consider as secure when application is non-secure.
Signed-off-by: Joakim Andersson <joakim.andersson@nordicsemi.no>
The is_substring did not work for true substrings, as it
would always compare [0] to [0], so it would return false
for the substring "BC" being in "ABC".
Removed the tolower as it is not necessary and fixes the issue.
Signed-off-by: Emil Gydesen <emil.gydesen@nordicsemi.no>
Commit adds implementation of the specification
recommendations regarding randomization of
responses on the access layer.
3.7.3.1 Transmitting an Access messages
Signed-off-by: Aleksandr Khromykh <aleksandr.khromykh@nordicsemi.no>
The patch updates README with detailed description of the requirements
regarding target devicetree needed to correctly build the sample.
Signed-off-by: Adam Wojasinski <adam.wojasinski@nordicsemi.no>
When commit 5b4f4253c1 introduced
"nordic,qspi-nor" dts binding the sample wasn't aligned to the change.
From that moment the sample started to be filtered out by the Twister.
The patch adds Nordic's compatible to the test filter.
Signed-off-by: Adam Wojasinski <adam.wojasinski@nordicsemi.no>
Enable INPUT_SHELL and INPUT_KBD_MATRIX_STATE by default if the sample
is compiled with CONFIG_SHELL=y. This makes it easier to use the shell
commands in the sample by just enabling the shell and let any help
command turn on automatically.
Signed-off-by: Fabio Baltieri <fabiobaltieri@google.com>
Update the readme to better describe contents of the sample, which is now
used to showcase the various input device types that LVGL offers.
Signed-off-by: Fabian Blatz <fabianblatz@gmail.com>
The conf and overlay files to properly compile the wifi samples were
omitted for the Xiao_esp32c3 board. I've added those two files and
confirmed that the sample properly compiles and runs.
Signed-off-by: Robert Baruch <robertbaruch@mac.com>
Add const prefix for service uuid and char uuid.
Since Service UUID and Char UUID should not change in the service
definition, they are most reasonably defined as rodata, also for
save some ram footprint.
The field `attr->user_data` type is `void *`, as this PR change
all Service UUID to rodata, so there must add (void *) to avoid warning.
Signed-off-by: Lingao Meng <menglingao@xiaomi.com>
In preparation of migrating to net_mgmt events, we need to remove
the observer event callback handler.
Signed-off-by: Pieter De Gendt <pieter.degendt@basalte.be>
The espi_saf.h header has a dependency on the eSPI driver supporing SAF.
Guard the include to fix builds of the Nuvoton eval boards.
Signed-off-by: Keith Short <keithshort@google.com>
Enforcing the peer's behavior is not strictly necessary. All the host
should do is make sure it is resilient to a spec-violating peer.
Moreover, a growing number of platforms were disabling the check, as the
spec allows "batching" HCI num complete packets events, stalling ATT RX.
Signed-off-by: Jonathan Rico <jonathan.rico@nordicsemi.no>
Co-authored-by: Aleksander Wasaznik <aleksander.wasaznik@nordicsemi.no>
This removes the fixed size bt_bap_base, which provides
2 improvements:
1) The RAM usage of the broadcast sink has been reduced.
For the Broadcast Sink sample it is a reduction of 120
octets, but with much better scaling for supporting
more or larger BASEs.
2) The functions to parse BASEs now support arbitrary sized
BASEs, where they were previously restricted by our
local Kconfig options. This allow us to parse any BASE
from a remote device, without encounting memory issues.
We are still memory restricted on the devices we
actually want to sync to.
Signed-off-by: Emil Gydesen <emil.gydesen@nordicsemi.no>
Removes support for the deprecated features of having a prj file
which has the board name on the end of it. Board Kconfig fragments
should be used instead.
Signed-off-by: Jamie McCrae <jamie.mccrae@nordicsemi.no>
Adds a zephyr,lvgl-keypad-input compatible to the native_posix board
overlay and the required code to control an button matrix widget.
Signed-off-by: Fabian Blatz <fabianblatz@gmail.com>
If server registration fails, allow fallback to secondary server,
or fallback to bootstrap.
Also allow fallback to different bootstrap server.
Add API to tell RD client when server have been disabled by
executable command.
Changes to RD state machine:
* All retry logic should be handled in NETWORK_ERROR state.
* New state SERVER_DISABLED.
* Internally disable servers that reject registration
* Temporary disable server on network error.
* Clean up all "disable timers" on start.
* Select server first, then find security object for it.
* State functions return void, error handling is done using states.
* DISCONNECT event will only come when client is requested to stop.
* NETWORK_ERROR will stop engine. This is generic error for all kinds
of registration or network failures.
* BOOTSTRAP_REG_FAILURE also stops engine. This is fatal, and we cannot
recover.
Refactoring:
* Server selection logic is inside server object.
* sm_handle_timeout_state() does not require msg parameter. Unused.
* When bootstrap fail, we should NOT back off to registration.
This is a fatal error, and it stops the engine and informs application.
Signed-off-by: Seppo Takalo <seppo.takalo@nordicsemi.no>
This board have an NXP MPU with 8 configurable regions, of which five
of them are already used by the static MPU configuration. Many of
these tests are failing due to lack of MPU regions or free partition
slots available, even when HW stack protection is disabled when
building with userspace support.
Signed-off-by: Manuel Argüelles <manuel.arguelles@nxp.com>
The LPS28DFW is an ultracompact, piezoresistive, absolute pressure sensor.
Compared to the LPS22DF, the LPS28DFW is waterproof and has a Dual FS
capability and does not have SPI. This commit extends the LPS22DF driver to
be compatible with the LPS28DFW device.
Signed-off-by: Jonas Remmert <j.remmert@phytec.de>
SIG has changed Bluetooth mesh to Bluetooth Mesh
Updating zephyr docs accordingly
Leaving out old release notes
Signed-off-by: Mia Koen <mia.koen@nordicsemi.no>
The b_u585i_iot02a stm32 board has no HTS221 DRDY pin
to trig the HTS221 relative humidity and temperature sensor
So that sample.sensor.hts221.trigger is not applicable.
Signed-off-by: Francois Ramu <francois.ramu@st.com>
in ip_k66f platfrom, we using rtt as debug port,
which is conflicted with usermode. see below:
warning: LOG_PRINTK
(defined at subsys/logging/Kconfig.processing:8)
has direct dependencies !USERSPACE && !LOG_MODE_MINIMAL
&& LOG with value n, but is currently being y-selected
by the following symbols:
- LOG_BACKEND_RTT_FORCE_PRINTK
(defined at subsys/logging/backends/Kconfig.rtt:103),
with value y, direct dependencies LOG_BACKEND_RTT &&
!LOG_FRONTEND_ONLY && !LOG_MODE_MINIMAL && LOG (value: y),
and select condition LOG_BACKEND_RTT &&
!LOG_FRONTEND_ONLY && !LOG_MODE_MINIMAL && LOG (value: y)
Signed-off-by: Hake Huang <hake.huang@oss.nxp.com>
Add a name for the Kconfig choice symbol
indicating the Zbus subscriber buffer allocation
and adjust the name of the existing choices.
Signed-off-by: Bartosz Bilas <bartosz.bilas@hotmail.com>
Sample readme states that shell inteface is supported
for evaluation. Added missing GPIO_SHELL and SENSOR_SHELL
to Kconfig.
Signed-off-by: Andy Sinclair <andy.sinclair@nordicsemi.no>
The existing npm1300_ek shield overlay has several example
voltage and gpio settings. For many use cases these are
invalid and need to be overridden, or removed with
delete-property.
These example configurations have been moved to a board
specific overlay.
Signed-off-by: Andy Sinclair <andy.sinclair@nordicsemi.no>
Introduce NET_CORE_IMAGE_HCI_IPC Kconfig setting to control inclusion
of HCI IPC image when building through sysbuild.
This allows users with custom netcore applications to avoid inclusion
of the default HCI IPC image.
Signed-off-by: Alberto Escolar Piedras <alberto.escolar.piedras@nordicsemi.no>
Using Connection Manager, it's easy to run lwm2m sample on
devices supporting different connectivity technologies
(for example, Wi-Fi and LTE).
Signed-off-by: Juha Ylinen <juha.ylinen@nordicsemi.no>
The correct printf format specifier for size_t is %zu. Without this
change the sample generates warnings like this:
warning: format '%u' expects argument of type 'unsigned int', but
argument 2 has type 'size_t' {aka 'long unsigned int'} [-Wformat=]
Signed-off-by: Johan Hedberg <johan.hedberg@intel.com>
Follow-up: #64704
Introducing NET_CORE_IMAGE_HCI_IPC Kconfig setting to control inclusion
of HCI IPC image when building through sysbuild.
This allows users with custom netcore applications to avoid inclusion
of the default HCI IPC image.
Signed-off-by: Torsten Rasmussen <Torsten.Rasmussen@nordicsemi.no>
Add the overlay for running the samples/subsys/nvs/ application
on the nucleo_g31rb. Define a 6kB storage_partition at the end
of the 128kB flash.
Signed-off-by: Francois Ramu <francois.ramu@st.com>
When using picolibc before 1.8.5, the only way to get 'long long' support
was to use the full version, including floating point support. This is too
large for this testcase.
Reduce the size of the printf code by switching to the version without
64-bit integer support. This allows the test to pass when using older
picolibc versions, such as that included with SDK version 0.16.3.
Signed-off-by: Keith Packard <keithp@keithp.com>
Rather than configuring in serial_wakeup sample, define LPUART1 wakeup
line in wl.dtsi file.
Additionally make few cosmetic changes to nucleo_wl55rj overlay in
serial wakeup sample.
Signed-off-by: Erwan Gouriou <erwan.gouriou@st.com>
On STM32WB55 series, wakeup in stop mode is not supported.
Disable this state in order to support this sample.
Add comments to other sections of the configuration.
Signed-off-by: Erwan Gouriou <erwan.gouriou@st.com>
`CONFIG_BT_CTLR_ADV_DATA_CHAIN` is a Zephyr Controller exclusive.
Use the max length instead to decide if we should add more data.
The motivation for the change is that tests/bsim/bluetooth/host/adv/chain
does not pass with Nordic's Softdevice Controller because of this.
Signed-off-by: Jonathan Rico <jonathan.rico@nordicsemi.no>
Add support for the WeAct Studio STM32G431 Core board. Note that this
board does not support USB-C PD in its default configuration. See the
board documentation for the necessary hardware reconfiguration.
Signed-off-by: Andreas Sandberg <andreas@sandberg.uk>
When linking with the 0.16.3 SDK version of picolibc, using long long
cbprintf support pulls in the full floating point printf which is much
larger than the integer-only version. This ends up overflowing the memory
region available for it. Increase the size of that by bumping the start of
the fake region by 8kB.
Signed-off-by: Keith Packard <keithp@keithp.com>
For all remaining samples which now set their integration platform
as native_posix(_64) switch them to native_sim(_64)
Signed-off-by: Alberto Escolar Piedras <alberto.escolar.piedras@nordicsemi.no>
Enable the remaining samples which run now in native_posix also
in native_sim.
Signed-off-by: Alberto Escolar Piedras <alberto.escolar.piedras@nordicsemi.no>
Clarify comment about why this samples is skipped in
posix arch based targets.
Signed-off-by: Alberto Escolar Piedras <alberto.escolar.piedras@nordicsemi.no>
Switch from native_posix to native_sim as default test platform
Add conf and DT overlays for native_sim.
Signed-off-by: Alberto Escolar Piedras <alberto.escolar.piedras@nordicsemi.no>
* In the docs replace references to native_posix with native_sim
* Switch the default test platform to native_sim from native_posix
* Add a runtime check for this sample
Signed-off-by: Alberto Escolar Piedras <alberto.escolar.piedras@nordicsemi.no>
BINDESC can be used with any POSIX arch based target,
not just native_posix.
Fix the kconfig filter and the sample yaml filter.
Signed-off-by: Alberto Escolar Piedras <alberto.escolar.piedras@nordicsemi.no>
In the docs replace references to native_posix with native_sim
Switch the default test platform to native_sim from native_posix
Signed-off-by: Alberto Escolar Piedras <alberto.escolar.piedras@nordicsemi.no>
In the docs replace references to native_posix with native_sim
Switch the default test platform to native_sim from native_posix
Signed-off-by: Alberto Escolar Piedras <alberto.escolar.piedras@nordicsemi.no>
Refer to the native_sim overlay instead of the native_posix one,
as native_posix is going to be deprecated soon.
Signed-off-by: Alberto Escolar Piedras <alberto.escolar.piedras@nordicsemi.no>
the reason is that the Mesh Profile clearly stipulates that Mesh nodes
cannot change their own element definitions.
Signed-off-by: Lingao Meng <menglingao@xiaomi.com>
All in-tree touchscreen drivers have been migrated over to input, the
compatibility node has been removed from those boards as well, this
sample can be dropped now.
Signed-off-by: Fabio Baltieri <fabiobaltieri@google.com>
Do not enable subsystem/driver shell modules by default and stop abusing
CONFIG_SHELL_MINIMAL, which is internal to the shell subsystem, to decide
when to enable a driver shell.
The list of shell modules has grown considerably through the
years. Enabling CONFIG_SHELL for doing e.g. an interactive debug session
leads to a large number of shell modules also being enabled unless
explicitly disabled, which again leads to non-negligible increases in
RAM/ROM usage.
This commit attempts to establish a policy of subsystem/driver shell
modules being disabled by default, requiring the user/application to
explicitly enable only those needed.
Signed-off-by: Henrik Brix Andersen <hebad@vestas.com>
This simple application periodically prints the temperature and humidity
measured by one or more digital humidity/temperature sensors.
Signed-off-by: Ian Morris <ian.d.morris@outlook.com>
Add virtual LAN support to the sample so that it is easier to
test the multiple mDNS listener feature implemented in previous
commit.
Signed-off-by: Jukka Rissanen <jukka.rissanen@nordicsemi.no>
In the docs replace references to native_posix with native_sim
Switch the default test platform to native_sim from native_posix
Signed-off-by: Alberto Escolar Piedras <alberto.escolar.piedras@nordicsemi.no>
Replace native_posix with native_sim as the
default integration platform.
Signed-off-by: Alberto Escolar Piedras <alberto.escolar.piedras@nordicsemi.no>
Instead of always enabling fuse for native_posix,
let's give users instructions on how to enable it
while building.
In the documentation: replace the references to native_posix
with native_sim, improve the links, mention the flash
simulator, and provide a separate subsection for FUSE access.
Add a separate test for the sample with fuse access enabled
and be sure it is possible to run both this and the basic
one with native_sim (was filtered out before for native_posix)
Signed-off-by: Alberto Escolar Piedras <alberto.escolar.piedras@nordicsemi.no>
DTLS Connection Identifier support requires DTLS stack
that supports it. MbedTLS support in Zephyr is already
ported in, also some offloaded sockets support it.
Signed-off-by: Seppo Takalo <seppo.takalo@nordicsemi.no>
Since model struct most of member should not change at run time,
so mark as const will be suitable and safely.
Signed-off-by: Lingao Meng <menglingao@xiaomi.com>
Allow this sample in native_sim, and set it as default
integration platform instead of native_posix.
Signed-off-by: Alberto Escolar Piedras <alberto.escolar.piedras@nordicsemi.no>
Allow this sample in native_sim, and set it as default
integration platform instead of native_posix.
Signed-off-by: Alberto Escolar Piedras <alberto.escolar.piedras@nordicsemi.no>
native_posix and native_sim are already excluded thru
the lack of required tags.
Let's remove the platform exclude instead of adding also
native_sim to it explicitly.
Signed-off-by: Alberto Escolar Piedras <alberto.escolar.piedras@nordicsemi.no>
Replace one of the dynamic threads with a static thread to show the
all the possible ways of creating threads.
Signed-off-by: Vilem Gottwald <xvigo.dev@gmail.com>
This commit has no functional changes. It makes the comments up to date
with the code and changes the code structure to ensure consistency.
These inconsistencies were introduced when the static thread definition
was replaced with dynamic, but the comments remained unchanged.
- Fixed outdated comments about the static approach that were
not corresponding to the code.
- Rearrange thread definitions, to obtain similar code structure
for both threads.
Signed-off-by: Vilem Gottwald <xvigo.dev@gmail.com>
For several samples that today have native_sim
enabled, enable them also for native_sim.
And set native_sim as default integration_platform
instead of native_posix.
Signed-off-by: Alberto Escolar Piedras <alberto.escolar.piedras@nordicsemi.no>
* In the sample doc, replace native_posix references with native_sim
* Enable native_sim in the sample yaml
Signed-off-by: Alberto Escolar Piedras <alberto.escolar.piedras@nordicsemi.no>
* In the sample doc, replace native_posix references with native_sim
* Enable native_sim in the sample yaml, and switch
integration_platform
Signed-off-by: Alberto Escolar Piedras <alberto.escolar.piedras@nordicsemi.no>
* In the sample doc, replace native_posix references with native_sim
* Provide overlays for native_sim
* Enable native_sim in the sample yaml
* Remove native_posix from the sample yaml platform_allow as it was
filtered out by the host libC
Signed-off-by: Alberto Escolar Piedras <alberto.escolar.piedras@nordicsemi.no>
* In the sample doc, replace native_posix references with native_sim
* Provide overlays for native_sim
* Enable native_sim in the test yaml
Signed-off-by: Alberto Escolar Piedras <alberto.escolar.piedras@nordicsemi.no>
* In the sample doc and shell script,
replace native_posix references with native_sim
* Provide overlays for native_sim(_64)
* Enable native_sim in the test yaml
Signed-off-by: Alberto Escolar Piedras <alberto.escolar.piedras@nordicsemi.no>
Let's replace the references to native_posix with native_sim.
Background: during this release native_sim is replacing
native_posix as the main host test/development platform.
Signed-off-by: Alberto Escolar Piedras <alberto.escolar.piedras@nordicsemi.no>
Rename
Networking with native_posix
to
Networking with native_sim
replace all links to this page accordingly
and replace its references to native_posix with native_sim.
Background: during this release native_sim is replacing
native_posix as the main host test/development platform.
Signed-off-by: Alberto Escolar Piedras <alberto.escolar.piedras@nordicsemi.no>
* In the sample doc, replace native_posix references with native_sim
* Provide an overlay for native_sim
* Enable native_sim in the test yaml
Signed-off-by: Alberto Escolar Piedras <alberto.escolar.piedras@nordicsemi.no>
* In the sample doc, replace native_posix references with native_sim
* Provide an overlay for native_sim
* Enable native_sim in the test yaml
Signed-off-by: Alberto Escolar Piedras <alberto.escolar.piedras@nordicsemi.no>
This adds retry logic for ASE state notifications if failed due to
insufficient number of buffers to send ATT PDU. The state transition is
retried after connection interval delay.
Fixes: #64574
Signed-off-by: Mariusz Skamra <mariusz.skamra@codecoup.pl>
In the docs replace the references to native_posix with native_sim.
In the sample, add overlays for native_sim, and add native_sim to filter
and as default integration platform.
Signed-off-by: Alberto Escolar Piedras <alberto.escolar.piedras@nordicsemi.no>
In the docs replace the references to native_posix with native_sim.
And switch the default test platform to native_sim from native_posix.
Signed-off-by: Alberto Escolar Piedras <alberto.escolar.piedras@nordicsemi.no>
In the docs replace the references to native_posix with native_sim.
And switch the default test platform to native_sim from native_posix.
Signed-off-by: Alberto Escolar Piedras <alberto.escolar.piedras@nordicsemi.no>
In the docs replace the references to native_posix with native_sim.
Enable this test in natives_sim.
And switch the default test platform to native_sim from native_posix.
Signed-off-by: Alberto Escolar Piedras <alberto.escolar.piedras@nordicsemi.no>
In the docs replace the references to native_posix with native_sim.
And switch the default test platform to native_sim from native_posix.
Signed-off-by: Alberto Escolar Piedras <alberto.escolar.piedras@nordicsemi.no>
In the docs replace the references to native_posix with native_sim.
And switch the overlays and default test platform to native_sim
from native_posix.
Signed-off-by: Alberto Escolar Piedras <alberto.escolar.piedras@nordicsemi.no>
In the docs replace the references to native_posix with native_sim
Enable native_sim in the tests, and replace native_posix as integration
platform.
Signed-off-by: Alberto Escolar Piedras <alberto.escolar.piedras@nordicsemi.no>
Let's replace the references to native_posix with native_sim in
the documentation, and enable this tests by default in
native_sim.
Signed-off-by: Alberto Escolar Piedras <alberto.escolar.piedras@nordicsemi.no>
Add support for low power mode on the G1120B0MIPI using the RT595. This
configuration is tested via a testcase in samples/drivers/display, which
should validate that the display can be driven by the RT595 when
CONFIG_PM and CONFIG_PM_DEVICE are set.
Signed-off-by: Daniel DeGrasse <daniel.degrasse@nxp.com>
Adds support for using a connected host to
broadcast audio via USB Audio.
Offload LC3 encoding to separate thread.
Signed-off-by: Lars Knudsen <LAKD@demant.com>
PR #63332 introduced a change to the LZ4 sample that set the malloc
arena to an unnecessarily large size.
After testing on native_posix, qemu_m3, and esp32s3_devkitm_appcpu, it
would appear 24K is a much more reasonable (and sufficient) size.
Signed-off-by: Benjamin Cabé <benjamin@zephyrproject.org>
Let's replace the references to native_posix with native_sim,
Background: during this release native_sim is replacing
native_posix as the main host test/development platform.
Signed-off-by: Alberto Escolar Piedras <alberto.escolar.piedras@nordicsemi.no>
Change the variable name from **us** to **ms** and increase its size
to **uint16_t** within the min_alarm_handler function. This update
allows the function to correctly handle the millisecond values in the
range of 0 to 999.
Signed-off-by: Charles Dias <charlesdias.cd@outlook.com>
There are more ipc_service backends that supports multiple endpoint.
This sample can be used for any of those backends, so this commits
makes the sample more generic. The default backend it still icmsg_me,
but now, the sample has files and instructions for icmsg_with_buf
backend.
Signed-off-by: Dominik Kilian <Dominik.Kilian@nordicsemi.no>
When connection manager (CONFIG_NET_CONNECTION_MANAGER) is disabled,
application starts right away. Scenario that it covers is when static
networking is used, like with emulators (QEMU, Native Sim, ...).
Since 'connected' flag was not set in such scenario, the internal loop
inside start_client() has ended up early and stop_udp_and_tcp() was called
quickly after starting TCP and UDP clients.
Set 'connected = true', when connection manager is disabled, so that it is
assumed that connection is working for the whole duration of the
echo-client sample.
Signed-off-by: Marcin Niestroj <m.niestroj@emb.dev>
On SoC series s32ze, Zephyr application cannot run with MPU
disabled, skipping relevant samples/tests
Signed-off-by: Dat Nguyen Duy <dat.nguyenduy@nxp.com>
Introduce a streaming API that uses the same data path as the async API.
This includes features to the decoder:
* Checking if triggers are present
Adding streaming features built ontop of existing triggers:
* Adding 3 operations to be done on a trigger
* include - include the data with the trigger information
* nop - do nothing
* drop - drop the data (flush)
* Add a new sensor_stream() API to mirror sensor_read() but add an
optional handler to be able to cancel the stream.
Signed-off-by: Yuval Peress <peress@google.com>
topic#sensor_stream
