The namespace allocated for the filesystem API is fs_* and FS_*. That
means all symbols and defines should adhere to it.
Jira: ZEP-1155
Change-Id: I422310448b7c7c347f621aea6d7b1d97ef25c94d
Signed-off-by: Johan Hedberg <johan.hedberg@intel.com>
Subsystems code will reside in subsys/ folder. This patch creates the
folder and moves FS code there.
Jira: ZEP-1120
Change-Id: If3b1bcb996c5fbd4056cd5d1920d41d29810d6b2
Signed-off-by: Ramesh Thomas <ramesh.thomas@intel.com>
Add a catch all for all architectures for their relevant board
directories so reviews, etc get covered/seen by the arch maintainers as
well.
Change-Id: Ib5a82039d7e8136bb73722df0a5edde0329726e8
Signed-off-by: Kumar Gala <kumar.gala@linaro.org>
Before, the kernel would run the main() function twice; first
as an entry in k_task_list, and then again from _main(). The
_main() invocation would be using a potentially insufficient stack
size.
Now if an MDEF file declares a main() thread, invoke it from
_main(), but honor the desired priority and stack size.
Issue: ZEP-1145
Change-Id: I1abf38fc038e270059589b11d96fae1b3f265208
Signed-off-by: Andrew Boie <andrew.p.boie@intel.com>
It's important that this configuration stays within the limits of the
Arduino 101 nRF51 (which has only 16kB of RAM, unlike most others that
have 32kB).
Change-Id: I359061f8a41f1373f254c49bff00f551f915bd70
Signed-off-by: Johan Hedberg <johan.hedberg@intel.com>
For the current purposes it's enough to build these tests only for the
ARM and x86 qemu targets. This also avoids false-positive failures on
platforms that don't have enough memory.
Change-Id: Icbbfc0603feba6bb1ec8a3054f8cdf0800f49ca1
Signed-off-by: Johan Hedberg <johan.hedberg@intel.com>
The combined controller & host build takes up too much RAM for the
16kB arduino_101_ble target, so limit it to the 32kB nRF52 & nRF51
DevKits.
Change-Id: Ib9d04765697b7f5c748633cb6244474d92f96995
Signed-off-by: Johan Hedberg <johan.hedberg@intel.com>
Move common config options one level up to try to simplify the per-board
defconfig
Change-Id: I3d80fa494050634d0f877af2015b01b85df20d1d
Signed-off-by: Amit Kucheria <amit.kucheria@linaro.org>
Signed-off-by: Kumar Gala <kumar.gala@linaro.org>
Add support for the STM32F401 chip on the board
Change-Id: I96c0799f3658ecea096fa5971bce9faf21919ee1
Signed-off-by: Amit Kucheria <amit.kucheria@linaro.org>
Signed-off-by: Ricardo Salveti <ricardo.salveti@linaro.org>
Signed-off-by: Kumar Gala <kumar.gala@linaro.org>
Change the clock accessors to a tuple of bus ID of the subsystem and enable
bits for the device - it is clearer to read than the opaque pointers.
Change-Id: I9ae73c222c04adac4cf2bc06e97f4ec199bdac3c
Signed-off-by: Ricardo Salveti <ricardo.salveti@linaro.org>
Signed-off-by: Amit Kucheria <amit.kucheria@linaro.org>
Signed-off-by: Kumar Gala <kumar.gala@linaro.org>
Change-Id: Ie8b35c433e96a5e6c840510586c383e31c6912c0
Signed-off-by: Amit Kucheria <amit.kucheria@linaro.org>
Signed-off-by: Kumar Gala <kumar.gala@linaro.org>
STM32F401 allows for upto 16 alternate functions on each pin.
Change-Id: Ib1c14fd31abaa2b05a5ab0f7bd1b4a4748f10f84
Signed-off-by: Ricardo Salveti <ricardo.salveti@linaro.org>
Signed-off-by: Amit Kucheria <amit.kucheria@linaro.org>
Signed-off-by: Kumar Gala <kumar.gala@linaro.org>
Implements MCU-specific GPIO input interrupt integration. Added
definition of System configuration controller as well as its needed by
the GPIO code.
The SYSCFG controller is used for system-specific configuration such as:
- remap the type of memory accessible at address 0x00000000
- manage the external interrupt line connection to GPIOs
- configure the I/O compensation cell
Change-Id: Id2ebfbd1b21e77be76406d1cd6cd5d4989e9e2fa
Signed-off-by: Ricardo Salveti <ricardo.salveti@linaro.org>
Signed-off-by: Amit Kucheria <amit.kucheria@linaro.org>
Signed-off-by: Kumar Gala <kumar.gala@linaro.org>
Based on the STM32F10x driver. Removing old code as we need to use the
bus number when dealing with 4 possible peripherals.
Change-Id: Id0263aa008e9b039ff9a00339e5622e289ffdf99
Signed-off-by: Ricardo Salveti <ricardo.salveti@linaro.org>
Signed-off-by: Amit Kucheria <amit.kucheria@linaro.org>
Signed-off-by: Kumar Gala <kumar.gala@linaro.org>
This patch adds support for the STMicroelectronics STM32F4x family in the
STM32 MCU line. Configuration is included for the STM32F401RE MCU.
Acknowledgements to Pawel Wodnicki's earlier submission from February that
was used as a starting point for this port. In the end, we rewrote all of it.
Change-Id: I9797c282ac3c0cc66a63b9d34821de95df537ef6
Signed-off-by: Amit Kucheria <amit.kucheria@linaro.org>
Signed-off-by: Ricardo Salveti <ricardo.salveti@linaro.org>
Event is such an overloaded and generic term (event logger, *kernel*
event logger, "protocol" events in other subsystems, etc.), that it is
confusing for the name an object. Events are kinda like signals, but not
exactly, so we chose not to name them 'signals' to prevent further
confusion. "Alerts" felt like a good fit, since they are used to "alert"
an application that something of significance should be addressed and
because an "alert handler" can be proactively registered with an alert.
Change-Id: Ibfeb5eaf0e6e62702ac3fec281d17f8a63145fa1
Signed-off-by: Benjamin Walsh <benjamin.walsh@windriver.com>
This better aligns with the actual functionality of the object.
Change-Id: I70abf54f994e92abd7367251089ea4f735d273fe
Signed-off-by: Benjamin Walsh <benjamin.walsh@windriver.com>
Since net_buf_get() for the avail_acl_tx FIFO is called in
interrupt context (ISR) it cannot wait, and it will fail
immediately returning NULL if it fails to acquire a buffer.
During LE Secure Connections pairing, when there is a fair
amount of packets coming from the host, the FIFO was running
out of buffers causing the packet to be dropped instead of
forwarding it to the controller.
The number allocated now matches the amount of TX buffers
in the controller, so that normal HCI flow control (from
the Host to the Controller) will kick-in preventing any
buffers from being dropped.
Change-Id: Ifad4fbac84ae938eb0e68b73a80a02ba79b6ff6e
Signed-off-by: Carles Cufi <carles.cufi@nordicsemi.no>
Fix the error in thread rescheduling:
Fix Fast IRQ exit routine error when it reschedules threads if
(prio >= 0) || (sched_locked == 0) || (next_thread == _current),
while the correct condition for thread rescheduling is:
(prio >= 0) && (sched_locked == 0) && (next_thread != _current),
Fix regular IRQ error when the regular IRQ exit routine rescheduled
threads when (next_thread == _current) instead of
(next_thread != current).
Increased IDLE_STACK_SIZE for ARC architecture, to hold saved
registers.
Change-Id: I1d87a968e231e13822844b7564567e6ca310cde2
Signed-off-by: Dmitriy Korovkin <dmitriy.korovkin@windriver.com>
Add a ccache option to allows enabling the use of ccache for builds
generated by sanitycheck.
Change-Id: Ia997ed29f38a3d2d71ba143456e6fcbc5946d56e
Signed-off-by: Kumar Gala <kumar.gala@linaro.org>
Calling TC_END_REPORT(complex_expression) might have side effects when
complex_expression is later put inside (result == TC_PASS? A : B)
evaluation, because result will be replaced verbatim.
To avoid operator assignment order changing things, protect
replacement of result by adding parenthesis.
Change-Id: I8fd07d97d4b49b4cd48a1c6ad345bf49fb2537b5
Signed-off-by: Inaky Perez-Gonzalez <inaky.perez-gonzalez@intel.com>
Adjust the dhcp_client sample Makefile to select a project
configuration based on BOARD rather than interface hardware. This is
more convenient for supporting other hardware than the current
organization and is consistent with various other samples.
Change-Id: I0f59b632144dfa875dc036ec6f4aa4f6657a79bc
Signed-off-by: Marcus Shawcroft <marcus.shawcroft@arm.com>
The correct layout for help text is <TAB><SPACE><SPACE>.
Change-Id: Ief4167e75709e358089f701041ac06386351f423
Signed-off-by: Marcus Shawcroft <marcus.shawcroft@arm.com>
The mk64f12 provides RNGA hardware. Follow the implementation pattern
used by various other driver classes and enable the RANDOM KSDK shim
driver if the RANDOM driver is enabled.
Change-Id: I46bdf16cf1c48937011fb1b0e4c292615efd4c95
Signed-off-by: Marcus Shawcroft <marcus.shawcroft@arm.com>
The header was always supposed to be Apache 2 and not 3-Clause BSD.
Change-Id: I82f319edfc7a76323b2b409fadc90e270d7f1cad
Signed-off-by: Johan Hedberg <johan.hedberg@intel.com>
All API's receiving bt_conn as parameter shall check if that is in fact
connected.
Change-Id: Ia96c0d4f49d09fa6559f62ce69547636ad346e64
Signed-off-by: Luiz Augusto von Dentz <luiz.von.dentz@intel.com>
This patch provides basic functions to send and parse the AT commands.
This patch is the basic version developed with reference to Bluetooth
Handsfree profile.
Change-Id: Ib44774fb0c6f8ce1639d464f12082af8bde72013
Signed-off-by: Sathish Narasimman <sathish.narasimman@intel.com>
This makes all Bluetooth samples and tests being build with unified
kernel. main() is now executed from init thread and specifying task
for it in mdef file is no longer needed. By default main stack is
1024 bytes and this should be enough for BT samples.
Change-Id: I6674eea2c028b78ada5190acef72937186738af2
Signed-off-by: Szymon Janc <ext.szymon.janc@tieto.com>
Fix issues with tab vs space as well as missing license/copyright
header in hci/Kconfig.
Change-Id: Id766308dc8eda2d598ea749e5e0d2166014db929
Signed-off-by: Johan Hedberg <johan.hedberg@intel.com>
Whenever the writer of a FIFO is an ISR and the reader a fiber it's
important to make sure that we give the chance for other fibers to run
in case the FIFO keeps getting new data from the ISR without ever
running empty.
Change-Id: I6b40461713d4acfdc6fcec13ff90c9697ff01935
Signed-off-by: Johan Hedberg <johan.hedberg@intel.com>
The bt_driver API was created when Zephyr only had a Bluetooth host
stack, but no controller-side functionality. The only "driver" that
was needed for the host was the HCI driver, and hence "HCI" was
omitted from the name.
With support both for host and controller Zephyr will be getting more
Bluetooth driver types, in particular radio drivers. To prepare for
this, move all HCI drivers to drivers/bluetooth/hci/ and rename the
bt_driver API bt_hci_driver.
Change-Id: I82829da80aa61f26c2bb2005380f1e88d069ac7d
Signed-off-by: Johan Hedberg <johan.hedberg@intel.com>
Since RSSI events trigger interrupts and signal the RX path
semaphore with a resulting event lenght of 0. Due to this
fact the Controller HCI driver was leaking (i.e. not freeing)
those events, grinding the recv_fiber to a halt.
Issue identified by Szymon Janc.
Change-Id: I3e259b2823717b523ac331f8f787252414fb9290
Signed-off-by: Carles Cufi <carles.cufi@nordicsemi.no>
