Update DMA drivers to use DT_HAS_<compat>_ENABLED Kconfig symbol
to expose the driver and enable it by default based on devicetree.
We remove 'depend on' Kconfig for symbols that would be implied by
the devicetree node existing.
Signed-off-by: Kumar Gala <galak@kernel.org>
This commit is converting the DMA kconfig for the stm32 dma driver
with new macro DT_HAS_<COMPAT>_ENABLED.
Signed-off-by: Francois Ramu <francois.ramu@st.com>
It includes the definition for the DMA peripheral of this type,
present on stm32U5 devices.
A particular DMA_STM32U5 config is selected for that purpose.
The driver is derived from the existing dma_stm32.c
The GPDMA is counting channels (0-15) ; stream offset is 0.
Signed-off-by: Francois Ramu <francois.ramu@st.com>
Many device pointers are initialized at compile and never changed. This
means that the device pointer can be constified (immutable).
Automated using:
```
perl -i -pe 's/const struct device \*(?!const)(.*)= DEVICE/const struct
device *const $1= DEVICE/g' **/*.c
```
Signed-off-by: Gerard Marull-Paretas <gerard.marull@nordicsemi.no>
It is frequent to find variable definitions like this:
```c
static const struct device *dev = DEVICE_DT_GET(...)
```
That is, module level variables that are statically initialized with a
device reference. Such value is, in most cases, never changed meaning
the variable can also be declared as const (immutable). This patch
constifies all such cases.
Signed-off-by: Gerard Marull-Paretas <gerard.marull@nordicsemi.no>
Previous versions were using, incorrectly, the host in/out regblock size
of 40 bytes for all peripherals when in fact the link in/out regblock size
is 20 bytes in size.
Signed-off-by: Tom Burdick <thomas.burdick@intel.com>
DMA controller ownership can be done in the driver
initialization, it does not need to be part of the SoC. It simplify
the code and remove duplicated definitions.
Signed-off-by: Flavio Ceolin <flavio.ceolin@intel.com>
MISRA C:2012 Rule 14.4 (The controlling expression of an if statement
and the controlling expression of an iteration-statement shall have
essentially Boolean type.)
Use `do { ... } while (false)' instead of `do { ... } while (0)'.
Use comparisons with zero instead of implicitly testing integers.
The commit is a subset of the original auditable-branch commit:
5d02614e34a86b549c7707d3d9f0984bc3a5f22a
Signed-off-by: Simon Hein <SHein@baumer.com>
This commit controls the stream busy flag of the dma channnel
Set as true : stream is busy each time the channel is
started or reloaded.
Signed-off-by: Francois Ramu <francois.ramu@st.com>
When the channel is overriden by the HAL,
the dma irq must always be handled (even if not busy).
Only when the dma channel is not overriden by the HAL
the irq is exiting when the channel is no more busy.
Signed-off-by: Francois Ramu <francois.ramu@st.com>
irq_lock() returns an unsigned integer key.
Generated by spatch using semantic patch
scripts/coccinelle/irq_lock.cocci
Signed-off-by: Johann Fischer <johann.fischer@nordicsemi.no>
HDA is a common IP used across the entire ADSP line and deserves
a name respecting that alongside similiar IP drivers such as the
ADSP GPDMA driver.
Signed-off-by: Tom Burdick <thomas.burdick@intel.com>
Fixes configured DMA direction for HDA link in/out drivers.
Adjusts the number of channels for link in/link out to safe value
that seems to work on all tested parts.
Signed-off-by: Tom Burdick <thomas.burdick@intel.com>
cAVS and ACE gpdma driver have several similarities. This commit merge
this two drivers into a single one for Intel ADSP devices.
Signed-off-by: Flavio Ceolin <flavio.ceolin@intel.com>
Uses the dt_compat_enabled Kconfig preprocessor to set defaults
for each HDA driver.
Each direction is uniquely selectable which can be useful when building
with SOF where only some directions may wish to be enabled at any given
time.
By default, given the device tree (intel_cavs.dtsi) only the host
directions are enabled but an overlay may adjust that as needed.
Signed-off-by: Tom Burdick <thomas.burdick@intel.com>
Meteorlake support as part of the Intel ADSP family.
Signed-off-by: Anas Nashif <anas.nashif@intel.com>
Co-authored-by: Michal Wasko <michal.wasko@intel.com>
Co-authored-by: Konrad Leszczynski <konrad.leszczynski@intel.com>
Co-authored-by: Rafal Redzimski <rafal.f.redzimski@intel.com>
Co-authored-by: Enjia Mai <enjia.mai@intel.com>
Co-authored-by: Flavio Ceolin <flavio.ceolin@intel.com>
Co-authored-by: Tomasz Leman <tomasz.m.leman@intel.com>
Co-authored-by: Bonislawski Adrian <adrian.bonislawski@intel.com>
Co-authored-by: Serhiy Katsyuba <serhiy.katsyuba@intel.com>
Co-authored-by: Andrey Borisovich <andrey.borisovich@intel.com>
Following zephyr's style guideline, all if statements, including single
line statements shall have braces.
Signed-off-by: Anas Nashif <anas.nashif@intel.com>
when the dma channel is stopped, the irq is no more
relevant ; clear any irq but do not process it.
Fix Typo on comments and add LOG_DBG on channel increment.
Signed-off-by: Francois Ramu <francois.ramu@st.com>
Adds few missing zephyr/ prefixes to leftover #include statements that
either got added recently or were using double quote format.
Signed-off-by: Fabio Baltieri <fabiobaltieri@google.com>
In order to bring consistency in-tree, migrate all drivers to the new
prefix <zephyr/...>. Note that the conversion has been scripted, refer
to #45388 for more details.
Signed-off-by: Gerard Marull-Paretas <gerard.marull@nordicsemi.no>
Adds a log backend that maintains a ringbuffer in coordination
with cAVS HDA.
The DMA channel is expected to be given some time after the logger
starts so a seperate step to initialize the dma channel is required.
Signed-off-by: Tom Burdick <thomas.burdick@intel.com>
Includes the definition of the STM32_DMA_STREAM_OFFSET
depending on the peripheral to adjust the first DMA channel
in the list of streams.
Signed-off-by: Francois Ramu <francois.ramu@st.com>
This change is controlling of function parameters before
configuring the STM32_DMA_HAL_OVERRIDE mode.
Then, in case the DMA channel is not valid (wrong ID) or busy,
an error occurs before overriding the DMA channel.
Signed-off-by: Francois Ramu <francois.ramu@st.com>
SOCs using the EDMA IP that supported caching must locate EDMA transfer
control descriptors (TCDs) in non cacheable memory. For M7 cores, this
can simply use the "nocache" section. For M4 cores, where the nocache
section does not exist, the chosen SRAM section must be a tightly
coupled memory block which cannot be cached. Add a note to all boards
with M4 SOCs that support caching explaining this issue, and enable EDMA
driver to locate TCDs in SRAM.
Signed-off-by: Daniel DeGrasse <daniel.degrasse@nxp.com>
Adds hda link in and out drivers. The link in and link
out channels of HDA have small differences
with the host channels. Updates the existing
cavs_hda drivers and code to account for these
differences.
Signed-off-by: Tom Burdick <thomas.burdick@intel.com>
This PR fixes up the Scatter-Gather EDMA mode for the MCUX EDMA Driver,
as well as enabling the dma reload feature for the same EDMA Driver.
Signed-off-by: Nickolas Lapp <nickolaslapp@gmail.com>
Multiple instances of the device would have inadvertently shared the
LLI pool potentially causing nasty bugs.
Signed-off-by: Tom Burdick <thomas.burdick@intel.com>
Rather than defining them in the header, require a set of defines
be provided to cavs_hda.h as part of the expected input to the API.
Signed-off-by: Tom Burdick <thomas.burdick@intel.com>
Adds an initial driver for HDA streams on cAVS. A common code base is
provided for all HDA streams while the drivers are identified
differently as they have small behavior differences.
Uses dma_status to describe the positions for read/write. Uses dma_reload
to inform when to move the read/write positions. This closely follows
how HDA is being used in SoF
Simple test case is provided for both drivers.
Signed-off-by: Tom Burdick <thomas.burdick@intel.com>
Ports the SOF DesignWare DMA code to Zephyr.
Effectively replaces much of what was the designware driver as this
driver enables scatter gather which the older driver did not.
* Enables cyclic transfer description lists when the cyclic config
param is given.
* Enables linear link position usage with cAVS GPDMA.
* Passes suspend/resume, scatter/gather tests.
* Provides status updates of the transfer through dma_get_status()
* Enables reloading a cyclic transfer with dma_reload()
* Enables dma handshakes using the dma_slot config param.
* cAVS specifics remain in the dma_cavs_gpdma driver.
Co-authored-by: Adrian Bonislawski <adrian.bonislawski@intel.com>
Co-authored-by: Tom Burdick <thomas.burdick@intel.com>
Signed-off-by: Tom Burdick <thomas.burdick@intel.com>
Re-running the script that checks for the const qualifier missing on
struct device ISR's parameter.
The script also changes the parameter 'arg' to 'dev' when relevant.
Signed-off-by: Tomasz Bursztyka <tomasz.bursztyka@linux.intel.com>
Just use dev->name. This change follow same principles applied when
DEV_CFG and DEV_DATA macros were removed.
Signed-off-by: Gerard Marull-Paretas <gerard.marull@nordicsemi.no>
Moves the nios2 msgdma driver device config struct to the device data
struct for mutable data. The config struct is expected to be const.
Signed-off-by: Tom Burdick <thomas.burdick@intel.com>
According to Kconfig guidelines, boolean prompts must not start with
"Enable...". The following command has been used to automate the changes
in this patch:
sed -i "s/bool \"[Ee]nables\? \(\w\)/bool \"\U\1/g" **/Kconfig*
Signed-off-by: Gerard Marull-Paretas <gerard.marull@nordicsemi.no>
Fix a couple of issues reported by checkpatch:
ERROR:POINTER_LOCATION: "(foo*)" should be "(foo *)"
Signed-off-by: Gerard Marull-Paretas <gerard.marull@nordicsemi.no>
It turns out XCC didn't like this change as it doesn't have a
__COUNTER__ builtin. Bummer.
This reverts commit e8389f2f53.
Signed-off-by: Tom Burdick <thomas.burdick@intel.com>
