Product URL: https://www.ti.com/product/CC1352P7
Datasheet : https://www.ti.com/lit/ds/symlink/cc1352p7.pdf
Features:
Powerful 48-MHz Arm® Cortex®-M4F processor
* 704KB flash program memory
* 256KB of ROM for protocols and library functions
* 8KB of cache SRAM
* 144KB of ultra-low leakage SRAM with parity for
high-reliability operation
* Dual-band Sub-1 GHz and 2.4 GHz operation
Updates:
* Remove CC1352P7_LaunchXL due to compliance checks
* Add CC1352P7 updates
* Update hal_ti for CC1352P7 support
* Remove blank line at end of modules/Kconfig.simplelink
* Split struct and typedef for pinctrl_soc_pin/pinctrl_soc_pin_t
* Reference cc13x2_cc26x2/pinctrl_soc.h
* Reference cc13x2_cc26x2/soc.h
Signed-off-by: Vaishnav Achath <vaishnav@beagleboard.org>
OPENTHREAD_CONFIG_TCP_ENABLE is now set by the OpenThread build system,
based on the CONFIG_OPENTHREAD_CLI_TCP_ENABLE Kconfig entry.
Setting this symbol in the config file is therefore redundant, and
causes multiple build warnings.
Signed-off-by: Robert Lubos <robert.lubos@nordicsemi.no>
The build will fail if `gpio1` is disabled in an overlay.
For example:
```
&gpio1 {
status = "disabled";
};
```
Signed-off-by: Francois Gervais <francoisgervais@gmail.com>
Add check in CMake files to prevent resource overlap for
TIMER0, TIMER1, RTC0.
Signed-off-by: Krzysztof Chruscinski <krzysztof.chruscinski@nordicsemi.no>
In general, RTC and TIMER driver implements counter API but there
are exception when those peripherals are used in a custom way
(e.g. for system timer or bluetooth). In that case, system must
prevent using counter based on a reserved instance. Previously,
it was managed by Kconfig options but that cannot be maintained
when switching to devicetree configuration of the counter driver.
A new approach removes Kconfig options and instead adds static
asserts in the files which are using direct peripherals. Those
asserts check if given node is not enabled in the device tree.
Signed-off-by: Krzysztof Chruscinski <krzysztof.chruscinski@nordicsemi.no>
This commit enables zephyr to configure the FatFs FF_FS_REENTRANT
option and support fs actions from multiple threads.
CONFIG_FS_FATFS_REENTRANT enables the option and provides zephyr
mutex wrappers.
Signed-off-by: Nicola Ochsenbein <Nicola.Ochsenbein@husqvarnagroup.com>
This commit extends the Zephyr module yaml scheme with additional
entries for sysbuild in the build section.
This allows for Zephyr modules to extend the sysbuild infrastructure
by providing additional CMake and Kconfig files to be included in
sysbuild.
The new settings are:
build:
sysbuild-cmake: <path>
sysbuild-kconfig: <path>/<file>
sysbuild-ext: <true>|<false>
sysbuild-kconfig-ext: <true>|<false>
those settings follow the same pattern as the equivalent Zephyr build
settings but are processed by sysbuild.
Signed-off-by: Jamie McCrae <jamie.mccrae@nordicsemi.no>
Signed-off-by: Torsten Rasmussen <Torsten.Rasmussen@nordicsemi.no>
Fixes an issue where thread preemption was not being disabled
correctly, failing to taking into account MetaIRQ, which can be
used to preempt any cooperative thread.
The updated code sets the current thread to `K_HIGHEST_THREAD_PRIO`
before calling the secure function, and restores the thread priority
level once secure execution has terminated, allowing the thread
to be preempted once again.
Signed-off-by: Kevin Townsend <kevin.townsend@linaro.org>
Adding an Openthread radio API `otPlatRadioSetMacFrameCounterIfLarger`
implementation and the corresponding call to the IEEEE802154 driver.
Signed-off-by: Przemyslaw Bida <przemyslaw.bida@nordicsemi.no>
Remove `#include "utils/code_utils.h"` and macros connected with it.
File was incorrectly included in `diag.c` as it is OpenThread's header
used for examples only.
Signed-off-by: Maciej Baczmanski <maciej.baczmanski@nordicsemi.no>
added `otPlatDiagRadioTransmitCarrier` functionality
disabled OT power calibration support
fixed wrong check of `radio_api->stop()` return value
in `otPlatRadioSleep()`
Signed-off-by: Maciej Baczmanski <maciej.baczmanski@nordicsemi.no>
The CANopenNode stack expects registered RX buffers to be processed and
matched in priority order. The priority corresponds to the index of each
each registered RX buffer with lower indexes having higher priority.
Depending on the CANopen COB-ID network configuration used, it may result
in overlapping CAN RX filters. In the case of overlaps, the priorities of
the registered RX buffers matter.
When receiving a CAN frame, process the RX buffers in priority order and
only dispatch the callback for the matching object with the highest
priority.
Fixes: #54364
Signed-off-by: Henrik Brix Andersen <hebad@vestas.com>
Added an option to disable and enable the continuous and optional
carrier functions in the nordic 802.15.4 driver.
Signed-off-by: Artur Hadasz <artur.hadasz@nordicsemi.no>
LEGACY_INCLUDE_PATH has been defaulting to "n" and marked as deprecated
in both v3.2 and v3.3. Drop the option entirely for v3.4.
Signed-off-by: Fabio Baltieri <fabiobaltieri@google.com>
Commit add hidden Kconfig option CONFIG_FS_FATFS_FF_USE_LFN
that is passed to ELM FAT to define FF_USE_LFN configuration.
The FF_USE_LFN still depends, indirectly, on choice
CONFIG_FS_FATFS_LFN_MODE config options
CONFIG_FS_FATFS_LFN_MODE_BSS, FS_FATFS_LFN_MODE_STACK and
FS_FATFS_LFN_MODE_HEAP, but the logic has been moved out of
zephyr_fatfs_config.h into Kconfig file.
Signed-off-by: Dominik Ermel <dominik.ermel@nordicsemi.no>
QCBOR cannot be shipped with Zephyr.
Allow the application to supply their own copy of QCBOR or let the TF-M
build system automatically download this dependency.
Signed-off-by: Joakim Andersson <joakim.andersson@nordicsemi.no>
Prevents Zephyr from enabling the initial attestation service in TF-M,
due to a dependency it has on an incompatibly-licensed library (QCBOR).
This update checks if either of the following config flags are
enabled at build time:
- `CONFIG_TFM_PARTITION_INITIAL_ATTESTATION`
- `CONFIG_TFM_PSA_TEST_INITIAL_ATTESTATION`
If either of these are set to true, a fatal error will be thrown at
build time, indicating the reason for the failure.
This change can be reverted once a longer term solution to the QCBOR
license issues has been resolved.
Signed-off-by: Kevin Townsend <kevin.townsend@linaro.org>
Add glue code for the thrift module. This includes:
* workarounds for Zephyr's missing C++ facilities
* thrift config.h
This code was merged from the following repository
at the commit specified below, with minor formatting
and coding-style modifications.
https://github.com/zephyrproject-rtos/gsoc-2022-thrift
e12e014d295918cc5ba0b4c507d1bf595a2f539a
Signed-off-by: Chris Friedt <cfriedt@meta.com>
The TF-M platform partition has now been ported to PSA firmware
framework 1.1 and can now be used together with the SFN model.
Signed-off-by: Joakim Andersson <joakim.andersson@nordicsemi.no>
Remove setting of the TFM_LIB_MODEL option for IPC and SFN models.
This option is removed together with the library model.
Signed-off-by: Joakim Andersson <joakim.andersson@nordicsemi.no>
Fix setting of TF-M floating point options when floating point is
enabled in the application.
FP design in Armv8.0-M architecture requires consistent FP ABI types
between SPE and NSPE.
Signed-off-by: Joakim Andersson <joakim.andersson@nordicsemi.no>
remove `CONFIG_OPENTHREAD_RADIO_LINK_IEEE_802_15_4_ENABLE` from
`openthread-core-zephyr-config.h` which is now handled in
`modules/openthread/CMakeLists.tx`
Signed-off-by: Maciej Baczmanski <maciej.baczmanski@nordicsemi.no>
Currently if C11 or higher is enabled, many files fail to compile because
static_assert is defined in multiple header files. Solve this by
disabling the one in the HAL if the other macro is found
Signed-off-by: Thad House <thadhouse1@gmail.com>
Add TF-M connection based NCS API source file to build.
This file is needed when a secure service is using connection
based method.
Signed-off-by: Joakim Andersson <joakim.andersson@nordicsemi.no>
Signed-off-by: David Brown <david.brown@linaro.org>
Update TF-M from 1.6.0 to 1.7.0
Update MBedTLS from 3.1.0 to 3.2.1.
Updates the cmake wrapper for changes introduced in TF-M 1.7.0.
Signed-off-by: Kevin Townsend <kevin.townsend@linaro.org>
Signed-off-by: Joakim Andersson <joakim.andersson@nordicsemi.no>
Signed-off-by: David Brown <david.brown@linaro.org>
In TF-M 1.7.0 release the Library model has been removed.
Remove the library model support from zephyr before updating TF-M
version.
Signed-off-by: Joakim Andersson <joakim.andersson@nordicsemi.no>
Signed-off-by: David Brown <david.brown@linaro.org>
Change from depending on newlib to requiring a full libc, this allows use
with picolibc or any other C library providing a complete implementation.
Signed-off-by: Keith Packard <keithp@keithp.com>
The nRF HW models have been updated to correspond to a 52833 instead
of a 52832. Let's follow them.
The motivation for the change is to enable proper BIS encryption support
(for BT LE Audio ISO).
Changes:
* Point in manifest to latest HW models
* SOC_COMPATIBLE_NRF52832 has been removed, and SOC_COMPATIBLE_NRF52833
added in its place (with no uses at this point)
* Where SOC_COMPATIBLE_NRF52832 was used to set encryption like for a 52832
(to avoid using the MAXPACKETLENGHT), we set the condition to just
SOC_NRF52832.
Note: The MAXPACKETLENGHT register exists in the new simulated nrf52833,
thought it does nothing.
* In the BLE ctrl LLL radio HAL, all macros are renamed accordingly
(timings are NOT changed).
* Board dts definition now refers to the 52833 soc definition. New 52833
features set as not supported by now.
Signed-off-by: Alberto Escolar Piedras <alberto.escolar.piedras@nordicsemi.no>
Remove the dependency on the test repositories having a zephyr module
file in their repositories.
With this change we can take the upstream test repositories direct
commit SHA or tag.
Signed-off-by: Joakim Andersson <joakim.andersson@nordicsemi.no>
This commit updates all deprecated `CONFIG_LIB_CPLUSPLUS` usages to:
* check if the Zephyr minimal C++ library is enabled using
`CONFIG_MINIMAL_LIBCPP` instead of relying on the
`CONFIG_LIB_CPLUSPLUS`-based inference.
* select `CONFIG_REQUIRES_FULL_LIBCPP` when there exists a component-
level C++ standard library dependency. This allows a component to
declare C++ standard library dependency without designating a
specific libray implementation.
* select the correct type of C++ standard library implementation to use
through one of the `CONFIG_LIBCPP_IMPLEMENTATION` choices.
Signed-off-by: Stephanos Ioannidis <stephanos.ioannidis@nordicsemi.no>
This removes the tinycbor module and replaces references in it
e.g. in sample text to use the zcbor replacement.
Signed-off-by: Jamie McCrae <jamie.mccrae@nordicsemi.no>
The LCG method used earlier in the random number generator was problematic,
as the lowest bits repeated periodically (for example, the generated number
always resulted in an odd-even-odd-even-.. sequence, or the last three bits
formed an cycle of the length 8). This is because the LCG was done module
2^32. Any LCG using a power of 2 as the modulus will cause the same issue.
The used RNG method was changed to Marsaglia's xor shift-algorithm,
which does not have this issue.
Signed-off-by: Artur Hadasz <artur.hadasz@nordicsemi.no>
Enabling by default (if SPI3 used) because it affects all revisions
since "Engineering B", including the most recent one as of today
(revision 3).
Size changes when enabled:
- -Og: flash +160 bytes (+0.02%), RAM +8 bytes (+0.01%)
- -Os: flash +144 bytes (+0.02%), no change to RAM usage
Signed-off-by: Reto Schneider <reto.schneider@husqvarnagroup.com>
There were some requests from users for adding the possibility
of setting default openthread tx output power using kConfig.
It is possible by adding the CONFIG_OPENTHREAD_DEFAULT_TX_POWER
kConfig and assigning it to the tx_power variable in the radio.c
file in the Openthread module.
Added the possibility to set default openthread power using
kConfig.
Signed-off-by: Arkadiusz Balys <arkadiusz.balys@nordicsemi.no>
Clean up occurrences of "#if IS_ENABLED(CONFIG_FOO)" an replace
with classical "#if defined(CONFIG_FOO)".
Signed-off-by: Erwan Gouriou <erwan.gouriou@linaro.org>
